OUTPUT Clause

Nov 7, 2007

Hi,

I'm copying records from table A to Table B. On "insert" being successful I want to delete the copied records from table A. I want to use one single transaction. Could I use OUTPUT to delete all records in table A which key matches the ones on "inserted" ?. I believe it could be possible but I have tried several ways without any luck.

INSERT INTO Table A (Field 1, Field 2)
OUTPUT (DELETE Table B WHERE Key = (SELECT Key FROM Inserted))
SELECT (Field1, Field 2) FROM TABLE B

Or something like that,

Thank you

View 1 Replies

Question On Output Clause !

Feb 29, 2008

I would like to add more columns on output clause while insert....

Following are the table formats used here ...

Table1 (col1, col2)
Table2 (col1, col2, col3, col4)
MyTable (C1,C2,C3,C4,C5,C6)

Insert into Table1 (col1, col2)
Output Inserted.col1, inserted.col2,MyTable.C3, MyTable.C4 into Table2
select C1,C2 from MyTable

Now the Output statement retrives only the Inserted.col1, inserted.col2 values, But I want to add MyTable.C3, MyTable.C4 values from the table <MyTable>

Is there any way to achieve this....

Thanks...

View 1 Replies View Related

Question About OUTPUT Clause

Nov 14, 2006

In the past when inserting a record into a table with an identity column, to return the new identity value I used one of SCOPE_IDENTITY, IDENT_CURRENT, and @@IDENTITY.

Question: will this sql 2005 approach also provide the newly added identity value?

insert into TestTable -- ID column of testtable is an Identity field

output inserted.id, inserted.col1 into @insertedRecords

values('row 20')

select ID from @insertedRecords

TIA,

Barkingdog

.

View 3 Replies View Related

Question On Output Clause !

Feb 29, 2008

I would like to add more columns on output clause while insert....

Following are the table formats used here ...

Table1 (col1, col2)
Table2 (col1, col2, col3, col4)
MyTable (C1,C2,C3,C4,C5,C6)

Insert into Table1 (col1, col2)
Output Inserted.col1, inserted.col2,MyTable.C3, MyTable.C4 into Table2

select C1,C2 from MyTable

Now the Output statement retrives only the Inserted.col1, inserted.col2 values, But I want to add MyTable.C3, MyTable.C4 values from the table <MyTable>

Is there any way to achieve this....

Thanks...

View 3 Replies View Related

Can A Value Be Assigned To An Output Parameter And Be Used In A Where Clause?

Dec 18, 2006

I need to update a table using a stored procedure that "UPSERTS". In this case, @OfficeId is passed with ParameterDirection.OutputSo when I update I assign the value to OfficeId like this (the office id value is being correctly assigned): SqlParameter OfficeIdParam = new SqlParameter("@OfficeId", SqlDbType.Int, 4); if (_officeId > 0) { OfficeIdParam.Value = _officeId; } OfficeIdParam.Direction = ParameterDirection.Output; The following segment of the stored procedure is throwing an error that the OfficeId does not exist: Update --- @OfficeId int output if not exists (select 1 from ORG_Office where OfficeId=@OfficeId) begin RAISERROR ('OfficeId does not exist in ORG_Office: E002', 16, 1) -- OfficeId does not exist. return -1 end May this approach work, and if the operation turns out to be an Insert I may do this:select @error_code = @@ERROR, @OfficeId= scope_identity() Thank you,jspurlin

View 1 Replies View Related

SQL 2012 :: Output Clause With Update

Sep 26, 2014

I need to update the account_status and show the audit in the ssrs report.

I wrote the following query in the ssrs report but when I click on refresh fields it is throwing error incorrect syntax near output

Declare @username nvarchar(50)
Declare @UserStatus Table
(id bigint,
Username nvarchar(50),
Oldaccount_status varchar(255),
Newaccount_status varchar(255))

[Code] .....

View 2 Replies View Related

Transact SQL :: UPDATE With OUTPUT Clause

May 28, 2015

I am trying to update a table and then also use OUTPUT clause to capture some of the columns. The code that I am using is something like the one below

UPDATE s
SET Exception_Ind = 1
OUTPUT s.Master_Id, s.TCK_NR
INTO #temp2
FROM Master_Summary s
INNER JOIN Exception d
ON d.Id = LEFT(s.Id, 8)
AND d.Barcode_Num = s.TCK_NR
WHERE s.Exception_Ind IS NULL

The above code is throwing an error as follows:

Msg 4104, Level 16, State 1, Procedure Process_Step3, Line 113
The multi-part identifier "s.Master_Id" could not be bound.
Msg 4104, Level 16, State 1, Procedure Process_Step3, Line 113

The multi-part identifier "s.TCK_NR" could not be bound.

View 4 Replies View Related

T-SQL (SS2K8) :: Get Output Of Procedure And Assign It To A Variable Used In WHERE Clause?

Mar 25, 2014

Get output of SQL Procedure and assign it to a variable used in WHERE Clause

Later I want to use this variable in my code in the WHERE Clause

Declare @ProjectNo nvarchar(10)

--Now I want to assign it to output of a storedprocedure which returns only 1 value and use it in the below SELECT query.

SELECT ID from TABLEA where Project in (@ProjectNo)

How to do it. How to assign @ProjectNo to output of storedProcedure called 'GetProjNumber'

View 1 Replies View Related

SQL Server 2012 :: OUTPUT Clause Returning Wrong Row?

Nov 6, 2014

I'm looking at various methods for deleting duplicate rows. Among the alternatives, one works just fine but gives me results that make me go?.

Consider this script:

declare @t table (a int, b int, c int, d int, e int)
insert into @t (a, b, c, d, e) values
(1, 2, 3, 4, 5),
(3, 4, 2, 3, 4),
(1, 2, 3, 4, 5)

select a,b,c,d,e, rn = row_number() over (
partition by a,b,c,d,e

[Code] ....

The code works -- that is, the duplicate row is deleted. However the output clause returns:

abcdern
123451

So....why? Why does the output clause show that the row with rn=1 was deleted, when the where clause stipulates rn > 1?

View 9 Replies View Related

OUTPUT @count =no Of Records Returnd By Dynamic Where Clause

Aug 18, 2005

Arvind writes "i want to create a stored procedure returns an OUTPUT variable containing the no. of records given by a query, the query being dynamic.
Preferrably the query should also be passed as a parameter to the stored procedure...If not,it should be constructed in the SP and a Part of the where clause is dependant on the value of another variable passed to the SP.

How should the query be constructed, executed, and then the Count(*) value returned?

"WHERE <condition1> AND <condition 2> ;

"AND <condition 2> " may exist or may not exist in the query; it is dependant."

View 1 Replies View Related

Recovery :: UPDATE Table And OUTPUT Clause To Capture Some Of Columns

May 28, 2015

I am trying to update a table and then also use OUTPUT clause to capture some of the columns. The code that I am using is something like the one below

UPDATE s
SET Exception_Ind = 1
OUTPUT s.Master_Id, s.TCK_NR
INTO #temp2
FROM Master_Summary s
INNER JOIN Exception d
ON d.Id = LEFT(s.Id, 8)
AND d.Barcode_Num = s.TCK_NR
WHERE s.Exception_Ind IS NULL

The above code is throwing an error as follows:

Msg 4104, Level 16, State 1, Procedure Process_Step3, Line 113
The multi-part identifier "s.Master_Id" could not be bound.
Msg 4104, Level 16, State 1, Procedure Process_Step3, Line 113
The multi-part identifier "s.TCK_NR" could not be bound.

View 5 Replies View Related

Error While Using OUTPUT Clause - The Multi-part Identifier Could Not Be Bound

Jun 2, 2006

I was trying to copy child records of one parent record into another, and wanted to report back new child record id and corresponding child record id that was used to create it. I ran into run-time error with OUTPUT clause. Following is a script that will duplicate the situation I ran into:

CREATE TABLE Parent(
      ParentID INT NOT NULL IDENTITY(1,1) PRIMARY KEY,
      ParentName VARCHAR(50) NOT NULL)
GO

CREATE TABLE Child(
      ChildID INT NOT NULL IDENTITY(1,1) PRIMARY KEY,
      ParentID INT NOT NULL REFERENCES Parent(ParentID),
      ChildName VARCHAR(50) NOT NULL)
GO

INSERT INTO Parent(ParentName) VALUES('Parent 1')
INSERT INTO Parent(ParentName) VALUES('Parent 2')
GO

INSERT INTO Child(ParentID, ChildName) VALUES(1, 'Child 1')
INSERT INTO Child(ParentID, ChildName) VALUES(1, 'Child 2')
GO

At this stage, there Child table looks like:

ChildID

ParentID

ChildName

1

1

Child 1

2

1

Child 2

What I want to do is copy Parent 1��s children to Parent 2, and report back which source ChildID that was used to create the new child records. So I wrote the query:

DECLARE @LinkTable TABLE (FromChildID INT, ToChildID INT)

INSERT INTO Child(ParentID, ChildName)
OUTPUT c.ChildID, inserted.ChildID INTO @LinkTable
      SELECT 2, c.ChildName
      FROM Child c
      WHERE c.ParentID = 1

SELECT * FROM @LinkTable

In the end I was expecting Child table to look like:

ChildID

ParentID

ChildName

1

1

Child 1

2

1

Child 2

3

2

Child 1

4

2

Child 2

and OUTPUT clause to return me:

FromChildID

ToChildID

1

3

Child record with ID 3 was created using ID of 1.

2

4

Child record with ID 4 was created using ID of 2.

But infact I��m getting following error:

Msg 4104, Level 16, State 1, Line 9
The multi-part identifier "c.ChildID" could not be bound.

Any ideas on how to fix the OUTPUT clause in the query to return me the expected output?

Thanks
Yogesh

View 7 Replies View Related

Transact SQL :: Usage Of OUTPUT Clause Depending On Temporary Table

Jul 14, 2015

Suppose we have the following table in our database;

CREATE TABLE [dbo].[PERMISSION](
[ID] [int] IDENTITY(1,1) NOT NULL,
[USERID] [int] NOT NULL,
[STARTTIME] [smalldatetime] NOT NULL,
[ENDTIME] [smalldatetime] NOT NULL,
[REASON] [nvarchar](250) NULL,
[PERMISSIONTYPEID] [int] NOT NULL,

[code]....

This code works pretty well. But I don't want to do this with "select" since there is OUTPUT clause in T-SQL. So the CommandText property will be changed into this;

command.CommandText = @"insert PERMISSION
output INSERTED.ID, INSERTED.CREATETIME into @outID, @outCREATETIME
values(2, getdate(), getdate(), 'sdfg', 1, DEFAULT);";

well, not only this statement gives an error while executing; but also, no such usage defined in the

documentation of OUTPUT Clause. Actually the documentation tell us to use Temporary Tables for that. So I have to change CommandText into this;
command.CommandText = @"DECLARE @MyTableVar table(ID int, CREATETIME smalldatetime);
insert PERMISSION
output INSERTED.ID, INSERTED.CREATETIME into @MyTableVar

code]....

No temporary tables required; thus, no "type spesific" things required. This way is easier to create dynamic queries though. Only,the RETURNING INTO clause.So, I was wondering; why MS-SQL (T-SQL) forces users to "declare a temporary table (type specific)" and "execute select on the temporary table in order to assign values to output parameters" while using "the OUTPUT Clause". Comparing to the Oracle's sample I'm just using "the RETURNING INTO Clause in order to assign values to output parameters" and that's it; very easy and dynamic. To Summarize, Oracle's RETURNING INTO Clause is better than MS-SQL's OUTPUT Clause, but in fact they're doing the same job.

View 7 Replies View Related

Mapping A String Field To Boolean Output In SELECT Clause

Oct 18, 2006

Hello,
I am facing a problem in a SELECT clause which i cannot solve.
In my SQL table ("myTable") i have a few columns ("Column1", "Column2", "TypeColumn"). When I select different columns of the table, instead of getting the value of TypeColumn, i would like to get a boolean indicating whether its value is a certain string or not.
For example, the TypeColumn accepts only a number of selected strings: "AAA", "BBB", "CCC".
when i do a select query on the table, instead of asking for TypeColumn i would like to ask a boolean value of 1 if TypeColumn is "AAA" and 0 if TypeColumn is "BBB" or "CCC". Also, i would like to make this query while I am also fetching the other columns. And i would like to use one query to get all that. I thought something like thsi would work:

SELECT Column1 AS Col1, Column2 AS Col2, IF(TypeColumn = "AAA", 1, 0) AS Col3
FROM myTable

but this doesn't work in SQL 2005!
Is it possible to do something similar in SQL 2005 using one query only? i am trying to avoid multiple queries for this.

thanks a lot for your help!

View 3 Replies View Related

Interaction Between Instead Of Insert Trigger And Output Clause Of Insert Statement

Jan 14, 2008

This problem is being seen on SQL 2005 SP2 + cumulative update 4

I am currently successfully using the output clause of an insert statement to return the identity values for inserted rows into a table variable

I now need to add an "instead of insert" trigger to the table that is the subject of the insert.

As soon as I add the "instead of insert" trigger, the output clause on the insert statement does not return any data - although the insert completes successfully. As a result I am not able to obtain the identities of the inserted rows

Note that @@identity would return the correct value in the test repro below - but this is not a viable option as the table in question will be merge replicated and @@identity will return the identity value of a replication metadata table rather than the identity of the row inserted into my_table

Note also that in the test repro, the "instead of insert" trigger actually does nothing apart from the default insert, but the real world trigger has additional code.

To run the repro below - select each of the sections below in turn and execute them
1) Create the table
2) Create the trigger
3) Do the insert - note that table variable contains a row with column value zero - it should contain the @@identity value
4) Drop the trigger
5) Re-run the insert from 3) - note that table variable is now correctly populated with the @@identity value in the row

I need the behaviour to be correct when the trigger is present

Any thoughts would be much appreciated

aero1

/************************************************
1) - Create the table
************************************************/
CREATE TABLE [dbo].[my_table](
[my_table_id] [bigint] IDENTITY(1,1) NOT NULL,
[forename] [varchar](100) NULL,
[surname] [varchar](50) NULL,
CONSTRAINT [pk_my_table] PRIMARY KEY NONCLUSTERED
(
[my_table_id] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF, FILLFACTOR = 70) ON [PRIMARY]
)

GO
/************************************************
2) - Create the trigger
************************************************/
CREATE TRIGGER [dbo].[trig_my_table__instead_insert] ON [dbo].[my_table]
INSTEAD OF INSERT
AS
BEGIN

INSERT INTO my_table
(
forename,
surname)
SELECT
forename,
surname
FROM inserted

END

/************************************************
3) - Do the insert
************************************************/

DECLARE @my_insert TABLE( my_table_id bigint )

declare @forename VARCHAR(100)
declare @surname VARCHAR(50)

set @forename = N'john'
set @surname = N'smith'

INSERT INTO my_table (
forename
, surname
)
OUTPUT inserted.my_table_id INTO @my_insert
VALUES( @forename
, @surname
)

select @@identity -- expect this value in @my_insert table
select * from @my_insert -- OK value without trigger - zero with trigger

/************************************************
4) - Drop the trigger
************************************************/

drop trigger [dbo].[trig_my_table__instead_insert]
go

/************************************************
5) - Re-run insert from 3)
************************************************/
-- @my_insert now contains row expected with identity of inserted row
-- i.e. OK

View 5 Replies View Related

Using Output Clause And Return Timestamp And Return Value

Oct 28, 2006

I am trying to bring my stored proc's into the 21st century with try catch and the output clause. In the past I have returned info like the new timestamp, the new identity (if an insert sproc), username with output params and a return value as well. I have checked if error is a concurrency violation(I check if @@rowcount is 0 and if so my return value is a special number.)

I have used the old goto method for trapping errors committing or rolling back the transaction.

Now I want to use the try,catch with transactions. This is easy enough but how do I do what I had done before?

I get an error returning the new timestamp in the Output clause (tstamp is my timestamp field -- so I am using inserted.tstamp).

Plus how do I check for concerrency error. Is it the same as before and if so would the check of @@rowcount be in the catch section?

So how to return timestamp and a return value and how to check for concurrency all in the try/catch.

by the way I read that you could not return an identity in the output clause but I had no problem.

Thanks for help on this

SM haig

View 5 Replies View Related

Transact SQL :: How To Create UNION Clause With Two Queries That BOTH Have WHERE Clause

Nov 4, 2015

I have a quite big SQL query which would be nice to be used using UNION betweern two Select and Where clauses. I noticed that if both Select clauses have Where part between UNION other is ignored. How can I prevent this?

I found a article in StackOverflow saying that if UNION has e.g. two Selects with Where conditions other one will not work. [URL] ....

I have installed SQL Server 2014 and I tried to use tricks mentioned in StackOverflow's article but couldn't succeeded.

Any example how to write two Selects with own Where clauses and those Selects are joined with UNION?

View 13 Replies View Related

Number Of ROWS Of Output Of Aggregate Transformation Sometimes Doesn't Match The Output From T-SQL Query

Dec 25, 2006

While using Aggregate Transformation to group one column,the rows of output sometimes larger than the rows returned by a T-SQL statement via SSMS.

For example,the output of the Aggregate Transformation may be 960216 ,but the

'Select Count(Orderid) From ... Group By ***' T-SQL Statement returns 96018*.

I'm sure the Group By of the Aggregate Transformation is right!

But ,when I set the "keyscale" property of the transformation,the results match!

In my opinion,the "keyscale" property will jsut affects the performance of the transformaiton,but not the result of the transformation.

Thanks for your advice.

View 2 Replies View Related

Transact SQL :: Generic Store Procedure Call Without Output Parameters But Catching Output

Sep 21, 2015

Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])

EX1 : @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 : @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 : @SPToCall : [sp_GetSomeResult]

I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working

DECLARE @myFinalVarFilledWithCachedOutput
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'

[code]...

View 3 Replies View Related

Output And Error Output Write The Same Table At The Same Time, Stall The Process.

Aug 30, 2006

Hi

I have Lookup task to determine if source data should be updated to or insert to the customer table. After Lookup task, the Error Output pipeline will redirect to insert new data to the table and the Output pipeline will update customer table. But these two tasks will be processing at the same time which causes stall on the process. Never end.....

The job is similiart to what Slow Changing Dimention does but it won't update the table at the same time.

What can I do to avoid such situation?

Thanks in advance,

JD

View 4 Replies View Related

Using Output From A Stored Procedure As An Output Column In The OLE DB Command Transformation

Dec 8, 2006

I am working on an OLAP modeled database.

I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).

I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.

The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.

What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?

I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.

Thanks in advance for any assistance you can provide.

View 9 Replies View Related

Query Produces Jumbled Output / Output Not In Sequence

Jul 23, 2005

Hi!Server info -Win2K3 Server +SP1 with 1 GB Memory and 1.5 GB Virtual MemorySQL Server 2000 Enterprise Edition + SP3 running on this.Required result -Create a SQL Script that will contain a set of create, update, insert& delete statements (about 17500 lines including blank lines) thatcan be run on different databases seperatelyHow we do this -We have a SP - that creates a temporary table and then calls anotherSP that actually populates the temporary table created by the first SP*Samples of both SPs are below -PROBLEMThe result is directed to a file -However when the query is run it runs through the entire script but'Jumbles' the outputRunning the same scripts on a copy of the database on other machineswork fine and the size of the outfiles is exactly the sameI have increased the page size to 2.5 GB and restarted the server.Running the sp now generated the correct output a few times but gotjumbled as before after a few more users logged in and activity on theserver increased.Another interesting point is that the output is jumbled exactly thesame way each time. It seems the sql executes correctly and writesthe output in chunks only writting the chunks out of sequence - butin the same sequence each time.e.g. of expected resultInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table3Values ................Update RefGenSet Last = 1234Where RefGenRef = 1JUMBLED OUTPUTInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table2Values ...Values ...Update RefGenSet Last = 1234Where RefGenRef = 1Insert into Table3Values ................Insert into Table1Values c, d, e, 21, 12....Insert into Table2----------------------------------------Sample of First Script - STATDATA_RSLT**************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOSET NOCOUNT ONGOCREATE PROCEDURE StatData_rsltASCREATE TABLE #tbl_Script(ScriptText varchar(4000))EXEC TestStatData_intSELECT t.ScriptTextFROM #tbl_Script tGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************************Sample of CALLED SP - TestStatData_int*******************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOCREATE PROCEDURE TestStatData_intASDECLARE @AttrRef int,@TestID int,@PrtTestRef int,@AttrType tinyint,@EdtblSw tinyint,@NmValRef int,@SrtTypeRef int,@AttrStr varchar(20),@TestStr varchar(20),@PrtTestStr varchar(20),@AttrTypeStr varchar(20),@EdtblStr varchar(20),@NmValStr varchar(20),@SrtTypeStr varchar(20),@TestRef int,@Seq int,@PrtRef int,@Value varchar(255),@TermDate datetime,@AttrID int,@DefSw tinyint,@WantSw tinyint,@TestRefStr varchar(20),@SeqStr varchar(20),@PrtStr varchar(20),@TermDateStr varchar(255),@AttrIDStr varchar(20),@DefStr varchar(20),@WantStr varchar(20),@LanRef int,@LanStr varchar(20),@Code varchar(20),@Desc varchar(255),@MultiCode varchar(20),@MultiDesc varchar(255),@InhSw tinyint,@InhStr varchar(20),@InhFrom int,@InhFromStr varchar(20),@Lan_TestRef int,@ActSw tinyint,@ActSwStr varchar(20)SELECT @Lan_TestRef = dbo.fn_GetTestRef('Lan')INSERT INTO #tbl_ScriptVALUES('')-- Create tablesINSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_Test (AttrRef int, TestID int , PrtTestRefint, AttrType tinyint, EdtblSw tinyint, NmValRef int, SrtTypeRefint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES('CREATE TABLE #tbl_TestAttr(AttrRef int, TestRef int, Seq int,PrtRef int, AttrType tinyint, Value varchar(255), TermDate datetime,AttrID int, DefSw tinyint, WantSw tinyint, ActSw tinyint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_AttrName(AttrRef int, LanRef int, Codevarchar(20), [Desc] varchar(255), MultiCode varchar(20), MultiDescvarchar(255), InhSw tinyint, InhFrom int)')INSERT INTO #tbl_ScriptVALUES ('')-- insert Test valuesDECLARE Test_cursor CURSOR FORSELECT l.AttrRef, l.TestID, l.PrtTestRef, l.AttrType, l.EdtblSw,l.NmValRef, l.SrtTypeRefFROM Test lOPEN Test_cursorFETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestStr = ISNULL(CAST(@TestID as varchar), 'NULL'),@PrtTestStr = ISNULL(CAST(@PrtTestRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@EdtblStr = ISNULL(CAST(@EdtblSw as varchar), 'NULL'),@NmValStr = ISNULL(CAST(@NmValRef as varchar), 'NULL'),@SrtTypeStr = ISNULL(CAST(@SrtTypeRef as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_Test(AttrRef, TestID, PrtTestRef,AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('VALUES ( ' + @AttrStr + ', ' + @TestStr + ', ' +@PrtTestStr+ ', ' + @AttrTypeStr + ', ' + @EdtblStr + ', ' + @NmValStr + ', ' +@SrtTypeStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefENDCLOSE Test_cursorDEALLOCATE Test_cursorDECLARE TestAttr_cursor CURSOR FORSELECT le.AttrRef, le.TestRef, le.Seq, le.PrtRef, le.AttrType,le.Value,le.TermDate, le.AttrID, le.DefSw, le.WantSw, le.ActSwFROM TestAttr leWHERE le.WantSw = 1AND le.ActSw = 1OPEN TestAttr_cursorFETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestRefStr = ISNULL(CAST(@TestRef as varchar), 'NULL'),@SeqStr = ISNULL(CAST(@Seq as varchar), 'NULL'),@PrtStr = ISNULL(CAST(@PrtRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@Value = ISNULL(@Value, 'NULL'),@TermDateStr = ISNULL(CAST(@TermDate as varchar), 'NULL'),@AttrIDStr = ISNULL(CAST(@AttrID as varchar), 'NULL'),@DefStr = ISNULL(CAST(@DefSw as varchar), 'NULL'),@WantStr = ISNULL(CAST(@WantSw as varchar), 'NULL'),@ActSwStr = ISNULL(CAST(@ActSw as varchar), '1')SELECT @Value = '''' + @Value + ''''WHERE @Value <> 'NULL'INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_TestAttr(AttrRef, TestRef, Seq, PrtRef,AttrType, Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @TestRefStr + ', ' +@SeqStr+ ', ' + @PrtStr + ', ' + @AttrTypeStr + ', ' + @Value + ', ' +@TermDateStr + ', ' + @AttrIDStr + ', ' + @DefStr + ', ' + @WantStr+', '+ @ActSwStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwENDCLOSE TestAttr_cursorDEALLOCATE TestAttr_cursorDECLARE AttrName_cursor CURSOR FORSELECT e.AttrRef, e.LanRef, e.Code, e.[Desc], e.MultiCode,e.MultiDesc, e.InhSw, e.InhFromFROM AttrName e, TestAttr leWHERE e.LanRef = 0AND e.AttrRef = le.AttrRefAND le.WantSw = 1AND le.ActSw = 1OPEN AttrName_cursorFETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@LanStr = ISNULL(CAST(@LanRef as varchar), 'NULL'),@Code = ISNULL(@Code, 'NULL'),@Desc = ISNULL(@Desc, 'NULL'),@MultiCode = ISNULL(@MultiCode, 'NULL'),@MultiDesc = ISNULL(@MultiDesc, 'NULL'),@InhStr = ISNULL(CAST(@InhSw as varchar), 'NULL'),@InhFromStr = ISNULL(CAST(@InhFrom as varchar), 'NULL')SELECT @Code = REPLACE(@Code, '''',''''''),@Desc = REPLACE(@Desc, '''','''''') ,@MultiCode = REPLACE(@MultiCode, '''','''''') ,@MultiDesc = REPLACE(@MultiDesc, '''','''''')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_AttrName(AttrRef, LanRef, Code, [Desc],MultiCode, MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @LanStr + ', ''' + @Code +''', ''' + @Desc + ''', ''' + @MultiCode + ''', ''' + @MultiDesc +''',' + @InhStr + ', ' + @InhFromStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromENDCLOSE AttrName_cursorDEALLOCATE AttrName_cursor-- Do update TestAttr dataINSERT INTO #tbl_ScriptVALUES ('UPDATE le')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' le.TestRef = t.TestRef,')INSERT INTO #tbl_ScriptVALUES (' le.PrtRef = t.PrtRef,')INSERT INTO #tbl_ScriptVALUES (' le.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' le.Value = t.Value,')INSERT INTO #tbl_ScriptVALUES (' le.TermDate = t.TermDate,')INSERT INTO #tbl_ScriptVALUES (' le.AttrID = t.AttrID,')INSERT INTO #tbl_ScriptVALUES (' le.DefSw = t.DefSw,')INSERT INTO #tbl_ScriptVALUES (' le.WantSw = t.WantSw,')INSERT INTO #tbl_ScriptVALUES (' le.ActSw = t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM TestAttr le, #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('WHERE le.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Update AttrNameINSERT INTO #tbl_ScriptVALUES ('UPDATE en')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' en.Code = te.Code,')INSERT INTO #tbl_ScriptVALUES (' en.[Desc] = te.[Desc],')INSERT INTO #tbl_ScriptVALUES (' en.MultiCode = te.MultiCode,')INSERT INTO #tbl_ScriptVALUES (' en.MultiDesc = te.MultiDesc,')INSERT INTO #tbl_ScriptVALUES (' en.InhSw = te.InhSw,')INSERT INTO #tbl_ScriptVALUES (' en.InhFrom = te.InhFrom')INSERT INTO #tbl_ScriptVALUES ('FROM AttrName en, #tbl_AttrName te')INSERT INTO #tbl_ScriptVALUES ('WHERE en.AttrRef = te.AttrRef')INSERT INTO #tbl_ScriptVALUES (' AND en.LanRef = te.LanRef')INSERT INTO #tbl_ScriptVALUES (' AND te.LanRef = 0')-- Do update Test the dataINSERT INTO #tbl_ScriptVALUES ('UPDATE l')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' l.TestID = t.TestID,')INSERT INTO #tbl_ScriptVALUES (' l.PrtTestRef = t.PrtTestRef,')INSERT INTO #tbl_ScriptVALUES (' l.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' l.EdtblSw = t.EdtblSw,')INSERT INTO #tbl_ScriptVALUES (' l.NmValRef = t.NmValRef')INSERT INTO #tbl_ScriptVALUES ('FROM Test l, #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('WHERE l.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')--DELETE where just updatedINSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t, Test l')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = l.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM te')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE te.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Insert TestAttrINSERT INTO #tbl_ScriptVALUES ('INSERT INTO TestAttr (AttrRef, TestRef, Seq, PrtRef,AttrType,Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestRef, t.Seq, t.PrtRef, t.AttrType,t.Value, t.TermDate, t.AttrID, t.DefSw, t.WantSw, t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('')-- AttrNameINSERT INTO #tbl_ScriptVALUES ('INSERT INTO AttrName(AttrRef, LanRef, Code, [Desc],MultiCode,MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('SELECT te.AttrRef, le.AttrRef, te.Code, te.[Desc],te.MultiCode, te.MultiDesc, ')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN 0')INSERT INTO #tbl_ScriptVALUES (' ELSE 1 END,')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN NULL')INSERT INTO #tbl_ScriptVALUES (' ELSE 0 END')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE le.TestRef = ' + CAST(@Lan_TestRef as varchar))INSERT INTO #tbl_ScriptVALUES ('')-- Insert new rowsINSERT INTO #tbl_ScriptVALUES ('INSERT INTO Test(AttrRef, TestID, PrtTestRef, AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestID, t.PrtTestRef, t.AttrType,t.EdtblSw, t.NmValRef, t.SrtTypeRef')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_Test')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_TestAttr')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_AttrName')-- Update RefGenDECLARE @RefGenReflast int,@RefGenRefStr varchar(10)SELECT @RefGenReflast = lastFROM RefGenWHERE RefGenRef = 1SELECT @RefGenRefStr = ISNULL(CAST(@RefGenReflast as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES('')INSERT INTO #tbl_ScriptVALUES('UPDATE RefGen')INSERT INTO #tbl_ScriptVALUES ('SET Last = ' + @RefGenRefStr)INSERT INTO #tbl_ScriptVALUES ('WHERE RefGenRef = 1')INSERT INTO #tbl_ScriptVALUES ('')GOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************RegardsGlenn

View 5 Replies View Related

GROUP By Clause Or DISTINCT Clause

Jul 23, 2005

Hi, can anyone shed some light on this issue?SELECT Status from lupStatuswith a normal query it returns the correct recordcountSELECT Status from lupStatus GROUP BY Statusbut with a GROUP By clause or DISTINCT clause it return the recordcount= -1

View 3 Replies View Related

Filtering Results In The Where Clause Vs A Having Clause

Oct 25, 2007

I am working with a vendor on upgrading their application from SQL2K to SQL2K5 and am running into the following.

When on SQL Server 2000 the following statement ran without issue:

UPDATE dbo.Track_ID

SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed

WHERE Processed = 0 AND LegNum = 1

AND TrackID IN

(

SELECT TrackID

FROM dbo.Track_ID

GROUP BY TrackID

HAVING MAX(LegNum) = 1 AND

TrackID + 'x1' IN

(

SELECT

dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))

FROM dbo.Track_ID INNER JOIN dbo.transactions

ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id

GROUP BY dbo.Track_ID.TrackID

)

)
Once moved to SQL Server 2005 the statement would not return and showed SOS_SCHEDULER_YIELD to be the waittype when executed. This machine is SP1 and needs to be upgraded to SP2, something that is not going to happen near time.

I changed the SQL to the following, SQL Server now runs it in under a second, but now the app is not functioning correctly. Are the above and the following semantically the same?

UPDATE dbo.Track_ID

SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed

WHERE Processed = 0 AND LegNum = 1

AND TrackID IN
(

SELECT TrackID

FROM dbo.Track_ID

WHERE TrackID + 'x1' IN

(

SELECT dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))

FROM dbo.Track_ID INNER JOIN dbo.transactions

ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id

GROUP BY dbo.Track_ID.TrackID

)
GROUP BY TrackID

HAVING MAX(LegNum) = 1

)

View 3 Replies View Related

PrimeOutput : Difference Between 'Output' And 'output Buffer'

Aug 12, 2005

When overriding the PrimeOutput method in a custom component, you get as parameters the outputIDs and the output buffers (of type PipelineBuffer). using the outputIDs you can get IDTSOutput90 outputs.

View 5 Replies View Related

Expression Defined In SELECT Clause Overwrites Column Defined In FROM Clause

May 14, 2008

2 examples:

1) Rows ordered using textual id rather than numeric id

Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
order by
v.id

Result set is ordered as: 1, 11, 2
I expect: 1,2,11

if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.

2) SQL server reject query below with next message

Server: Msg 169, Level 15, State 3, Line 16
A column has been specified more than once in the order by list. Columns in the order by list must be unique.

Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
cross join (
select 1 id
union select 2 id
union select 11 id
) u
order by
v.id
,u.id

Again, if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.

It reproducible on

Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)

and

Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)

In both cases database collation is SQL_Latin1_General_CP1251_CS_AS

If I check quieries above on database with SQL_Latin1_General_CP1_CI_AS collation then it works fine again.

Could someone clarify - is it bug or expected behaviour?

View 12 Replies View Related

ERROR [42000] [Lotus][ODBC Lotus Notes]Table Reference Has To Be A Table Name Or An Outer Join Escape Clause In A FROM Clause

May 27, 2008

I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error

ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause

I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.

View 1 Replies View Related

ERROR [42000] [Lotus][ODBC Lotus Notes]Table Reference Has To Be A Table Name Or An Outer Join Escape Clause In A FROM Clause

May 27, 2008

View 1 Replies View Related

Having Clause Without GROUP BY Clause?

Nov 20, 2004

Hi,

What is HAVING clause equivalent in the following oracle query, without the combination of "GROUP BY" clause ?

eg :

SELECT SUM(col1) from test HAVING col2 < 5

SELECT SUM(col1) from test WHERE x=y AND HAVING col2 < 5

I want the equivalent query in MSSQLServer for the above Oracle query.

Also, does the aggregate function in Select column(here the SUM(col1)) affect in anyway the presence of HAVING clause?.

Thanks,
Gopi.

View 3 Replies View Related

Top Clause With GROUP BY Clause

Apr 3, 2008

How Can I use Top Clause with GROUP BY clause?

Here is my simple problem.

I have two tables

Categories
Products

I want to know Top 5 Products in CategoryID 1,2,3,4,5

Resultset should contain 25 Rows ( 5 top products from each category )

I hope someone will help me soon.
Its urngent

thanks in advance

regards
Waqas

View 10 Replies View Related

Diff In On Clause And Where Clause?????

Apr 4, 2007

hi..
i have basic question like

what is differance between conditions put in ON clause and in WHERE clause in JOINS????

see conditions that shown in brown color

select d1.SourceID, d1.PID, d1.SummaryID, d1.EffectiveDate,
d1.Audit, d1.ExpirationDate, d1.Indicator
from[DB1].[dbo].[Implicit] d1 inner join [DB2].[dbo].[Implicit] d2
on d1.SummaryID=d2.SummaryID
AND d1.ListType = d2.ListType
AND (d1.EffectiveDate <= d2.ExpirationDate or d2.ExpirationDate is null)
AND (d1.ExpirationDate >= d2.EffectiveDate or d1.ExpirationDate is null)
whered1.ImplicitID >= d2.ImplicitID AND
(d1.SourceID<>d2.SourceID
OR (d1.SourceID IS NULL AND d2.SourceID IS NOT NULL)
OR (d1.SourceID IS NOT NULL AND d2.SourceID IS NULL)
)

select d1.SourceID, d1.PID, d1.SummaryID, d1.EffectiveDate,
d1.Audit, d1.ExpirationDate, d1.Indicator
from[DB1].[dbo].[Implicit] d1 inner join [DB2].[dbo].[Implicit] d2
on d1.SummaryID=d2.SummaryID
AND d1.ImplicitID = d1.ImplicitIDAND d1.ListType = d2.ListType
AND (d1.EffectiveDate <= d2.ExpirationDate or d2.ExpirationDate is null)
AND (d1.ExpirationDate >= d2.EffectiveDate or d1.ExpirationDate is null)
whered1.ImplicitID >= d2.ImplicitID AND
(d1.SourceID<>d2.SourceID
OR (d1.SourceID IS NULL AND d2.SourceID IS NOT NULL)
OR (d1.SourceID IS NOT NULL AND d2.SourceID IS NULL)
)

another thing...

if we put AND d1.ImplicitID = d1.ImplicitID condition in second query then shall we remove
d1.ImplicitID >= d2.ImplicitID from WHERE clause????

View 6 Replies View Related

SQL Inner Join Clause And The Where Clause

Jan 21, 2008

Hi everyone,
I saw some queries where SQL inner join clause and the where clause is used at the same time. I knew that "on" is used instead of the "where" clause. Would anyone please exaplin me why both "where" and "on" clause is used in some sql Select queries ?

Thanks

View 6 Replies View Related

Is It Possible To Re-reference A Column Alias From A Select Clause In Another Column Of The Same Select Clause?

Jul 20, 2005

Example, suppose you have these 2 tables(NOTE: My example is totally different, but I'm simply trying to setupthe a simpler version, so excuse the bad design; not the point here)CarsSold {CarsSoldID int (primary key)MonthID intDealershipID intNumberCarsSold int}Dealership {DealershipID int, (primary key)SalesTax decimal}so you may have many delearships selling cars the same month, and youwanted a report to sum up totals of all dealerships per month.select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',sum(cs.NumberCarsSold) * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDMy question is, is there a way to achieve something like this:select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',TotalCarsSoldInMonth * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDNotice the only difference is the 3rd column in the select. Myparticular query is performing some crazy math and the only way I knowof how to get it to work is to copy and past the logic which isgetting out way out of hand...Thanks,Dave

View 5 Replies View Related