Obscure SQL Server Error When Task Fails In My Dts
Sep 19, 2007
Does anyone have any insight to this error:
"Duplicate column name resolution could not be done because the ordinal specified a column of a different name"
I googled it and got one result with no resolution.
I get this error from SQL Server when a task in my dts package fails. My dts package is attempting to update records whose fields have changed based on a specified criteria.
Any help would be greatly appreciated.
TIA,
Jennifer
View 5 Replies
ADVERTISEMENT
Jul 6, 2007
Hello,
I've got 2 SQL servers in a test environment - one is 2000 and the other is MSDE and they are seperate machines. I have added the MSDE server as a linked server to my 2000 box by issuing the following command:
EXEC sp_addlinkedserver '192.168.1.108', N'SQL Server'
I can query the database using an openquery in a select statement like so:
select * from openquery([192.168.1.108], 'select * from remote_test.dbo.products')
but when I try a direct query like the following:
select * from [192.168.1.108].remote_test.dbo.products
I get the following error:
An error occurred while executing batch. Error message is: Processing of results from SQL Server failed because of an invalid multipart name "192.168.1.108.remote_test.dbo.products", the current limit of "4" is insufficient.
I can't seem to figure out anything about this error. Anyone have any ideas?
Thanks,
Jeff Balcerzak
View 5 Replies
View Related
May 15, 2006
I successfully installed SQL Server 2005 SP1 on one PC. When I attempt to install it on a second PC, however, I get the following obscure error:
Unexpected Error Occurred
The following unexpected error occurred:
That's right, there's nothing else listed, other an OK button. D'oh! When I press the OK button, the following error report dialog box appears:
Hotfix.exe
A recently applied update, NULL, failed to install.
There are no pending updates that I'm aware of, as I just booted the PC. I sent the error report.
I notice on this particular PC that the SP1 install EXE is expanding/writing to an external SCSI drive; would that make a difference? I don't see a way to specify a different (i.e., internal ATA drive).
Any other ideas?
View 18 Replies
View Related
Jul 1, 2015
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies
View Related
Nov 21, 2006
Hi,
I have created a SSIS package and tested it in V.Stdio where it runs fine and uploads file on the remote server.
Now I have scheduled it to run as a job in SQL SERVER AGENT as JOB, but it fails when it comes to the upload task?
I am quite sure as it is something with FTP connection string or security, but can't figure it out.
I have simply added the IP/login/password in the connection manager for upload task.
Any help/ guidance would be great.
Thanks,
Ad
View 4 Replies
View Related
Apr 7, 2006
I have developed an SSIS package that includes a Script Task on a 32-bit machine. The PrecompileScriptIntoBinaryCode property is set to True. After I build the package, the .dtsx file includes a <BinaryItem> element for that Task. Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.
When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio. However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."
I have reviewed posts on this error from late 2005, but the solutions don't work in this case. Specifically:
1. The Precompile property is already set to True.
2. I have already verified that the script was compiled.
Any further suggestions?
View 7 Replies
View Related
Apr 10, 2006
I have developed a SQL Server 2005 Integration Services (SSIS) package that includes a Script Task on a 32-bit machine. The PrecompileScriptIntoBinaryCode property is set to True. After I build the package, the .dtsx file includes a <BinaryItem> element for that Task. Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.
When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio. However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."
I have reviewed posts on this error from late 2005, but the solutions don't work in this case. Specifically:
1. The Precompile property is already set to True.
2. I have already verified that the script was compiled.
Any further suggestions?
View 1 Replies
View Related
Aug 10, 2006
Hi
We used to used Sql Server 2000 DTS to perform daily backups to remote servers very successfully but just cannot do the same with SSIS.
I set my Transfer Sql Transfer Objects Task to use the following settings:
CopyData = true
ObjectsTocopy = All Tables
As soon as it hits a table that has a foreign key, I get the following error:
"Truncate data failed for Table nnn"
I've tried setting DropObjectsFirst = True but this fails too with foreign key violations.
First of all, am I doing something obviously wrong? Is SSIS not smart enough to drop tables in the right order so that we don't get foreign key violations?
Am I totally barking up the wrong tree with this and can anyone suggest a better way of doing remote backups?
Kind regards
Ben
View 3 Replies
View Related
Aug 8, 2007
Howdy folks!
Next question of the day:
I have four data types that I can't (or at least I think I can't) use a _variant_t for conversion. The four types are:
- bigint (I'm sending to a LARGE_INTEGER data structure)
- guid (I'm sending to a GUID data structure)
- numeric (I'm sending to a DB_NUMERIC data structure)
- datetime (I'm sending to a DBTIMESTAMP data structure)
I'm looking for a way to locally convert (i.e. not a provider conversion) each to a string. For all the other data types I've been able to cast using _variant_t's, but with these I can't seem to find a way. What are y'all suggestions for working with these data types?
Thanks!
View 9 Replies
View Related
Feb 21, 2008
Hi,
I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042.
I have a common maintenance plan that runs on each of the servers. The maintenance plan runs
fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:
Check Database integrity on Local server connection
Databases: <list of databases>
Include indexes
Task start: 2008-02-21T00:05:42.
Task end: 2008-02-21T00:05:46.
Failed0) Alter failed for Server €˜XYZ€™
I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time.
If I run the DBCC manually against the databases they all report fine.
I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.
Does anyone know what the problem could be?
View 23 Replies
View Related
Sep 19, 2007
Does anyone have any insight to this error:
"Duplicate column name resolution could not be done because the ordinal specified a column of a different name"
I googled it and got one result with no resolution.
I get this error from SQL Server when a task in my dts package fails. My dts package is attempting to update records whose fields have changed based on a specified criteria.
The specific task that fails is a transform data task and contains the following sql query:
select *
from tableNew new, tableOld old
where new.col1 = old.col1 and new.col2 <> old.col2 and old.col3 = new.col3
I then have a transformation to update col1, col2, col3.
Any help would be greatly appreciated.
TIA,
Jennifer
View 3 Replies
View Related
May 5, 1999
I have a SQL server scheduled to replication. This works fine if it has to do that one the sever on the same mechine. If it has to be done to another server, the replication fails with the following error message.
08001[Microsoft][ODBC SQL Server Driver][dbnmpntw]Connectionopen(Createfile())
Does any one know how to fix this.
Any help will be appreciated.
Thank you.
View 1 Replies
View Related
Oct 9, 2007
Hi, I was wondering if anybody knows the solution to this problem: I have a DTS package (SQL Server 2000) which is scheduled to pick up and process a TEXT file into the SQL table. The file contains a lot of fields, among them are DUE_DATE and DISC_DATE in such format "MM/DD/YYY" but they are string type in the file. During Transformation Task both fields are being imported into SQL table as DateTime. It happened that today the task failed because the file contained 00 00 0000 and it couldn't convert integer to DateTime. Unfortunatly there is no way to check on correctness of data when file is supplied. Is it possible to do something during transformation task to either remove the record and send email that that record is not being processed or convert bad data to blank string so it can be processed. Not sure if converting is a best practice because i don't know what kind of junk could be entered :)I noticed that actually the problem occurs quite often due to invalid data format supplied in the file. It worries me that the whole process fails when the Transformation fails for the specific record.Please help,Thank you in advance!
Tatyana Hughes
View 4 Replies
View Related
Jan 18, 2007
Hi:
I am getting the following error when I start debugging my Package, I am not sure what this is related to, but basically, input (datatype is a int, and its mapped to a column which is also int), so I am not sure whats happening here. The input column is actually a derived column, and its set as a 4 byte un-signed int, please advice on where should I start looking to troubleshoot this issue. This loanapplicationid is actually a user variable that is utilized by other tasks in my control flow as well:
Error: 0xC020901C at InsertApplicationCL5, OLE DB Destination [16]: There was an error with input column "LoanApplicationID" (1161) on input "OLE DB Destination Input" (29). The column status returned was: "The value violated the integrity constraints for the column.".
View 5 Replies
View Related
Jun 10, 2005
I've created an SSIS package that retrieves a file from an FTP
View 13 Replies
View Related
Aug 30, 2007
Hi everyone:
I have a very simple FTP Task that is supposed to grab two files from an ftp server and save them locally on my machine. The problem is that when I test the connection everything works okay (I know that this connection "hides" the password when seen on the Connection Manager Editor, so I re-enter it everytime I want to test the connection). I can see in the Task property that the username and passwords are set, but regardless I always get this error message:
Error: 0xC002918F at Cost Files Transfer, FTP Task: Unable to connect to FTP server using "FTP Bread".
Any idea what could be worng?
Thanks
Idelso
View 2 Replies
View Related
Jun 19, 2005
I setup my ExecuteSQL task to have a "Single Row" resultset. The query returns no rows. It fails. I don't think it should but then maybe this is consistent with the lookup transform piping rows down the error output if there is not a lookup value returned.
View 9 Replies
View Related
Oct 31, 2006
Now is this a limitation in SSIS or am I missing something. I have an XML file that needs validation. I am using the 'XML Task' control for that. The validation runs fine so long as the file is below a certain size. I am not sure what the cutoff size is but the validation runs fine if the XML file size is 60Mb. I include a few more records in my XML file to make the file size 65Mb and run ETL again and validation fails!
There is not much detail in the error message other than 'Task XML Validation failed'. I dont think there should be any kind of timeout issue. The whole process takes less than a minute before failing.
The issue is definately not with the new records that get added. I have verified the new file with xmlspy and it validates just fine. I have also validated the newly added records (5 Mb) through the same ETL process and that runs fine too.
Please suggest if I should spend time finding what the issue is or simply move on assuming its a known bug? Has any one experienced this?
Thanks,
Sumeet
View 4 Replies
View Related
Feb 20, 2006
II use the mirroring wizard to config all these three servers(windows authorization is used), the error logs in primary server and mirror server are showed as below
a) On primary server:
Error: 1474, Severity: 16, State: 1
Database mirroring connection error 4 'An error occurred while receiving data: '10054(An existing connection was forcibly closed by the remote host.)'.' for 'TCP://mymirror.mydomain:5022'
b) On mirror server:
Database Mirroring login attempt by user 'NT AUTHORITYANONYMOUS LOGON.' failed with error: 'Connection handshake failed. The login 'NT AUTHORITYANONYMOUS LOGON' does not have CONNECT permission on the endpoint. State 84.'.
It states I do NOT have permission on this endpoint, but actually, I grant the permission to the endpoint on both primary and mirror server using command
GRANT CONNECT ON ENDPOINT::Mirroring TO [mydomainmyuser];
Also, I followed the article http://msdn2.microsoft.com/en-us/library/ms189127.aspx ,no firewall issue, the endpoint is created and started by checking sys.database_mirroring_endpoints
Hope someone can help me resolve this issue... Thank you very much..
View 44 Replies
View Related
Jan 11, 2008
Hi,
I have a package that has several FTP tasks in sequence:
[ftp task 1]->[ftp task 2]->[ftp task 3]->[ftp task 4]
[Ftp task 4] fails about 20% of the time, for no apparent reason. This is the error message I receive:
[FTP Task] Error: Unable to receive files using "FTP Connection Manager".
The problem is, it works most of the time (80%), but every 4 or 5 tries, it fails. This makes NO sense to me. Is this a bug perhaps?
Please help... should we use an ftp script instead, as the ftp task seems rather unreliable.
Thanks
View 5 Replies
View Related
Jan 27, 2008
I have added a package from SQL Server to another package as an "Execute Package Task" it fails with this error:
Error: Error 0xC0014062 while preparing to load the package. The LoadFromSQLServer method has encountered OLE DB error code 0x80040E14 (Only the owner of DTS Package 'nVision_AgentPump' or a member of the sysadmin role may create new versions of it.). The SQL statement that was issued has failed. .
I tried setting the Protection Level to "don't save sensitive", and running the package in process and out. Any idea where to look?
Thanks,
Kayda
View 6 Replies
View Related
Sep 26, 2006
I have a package (i.e. child package) which runs itself perfectly fine without displaying any error.
However when I embeded this package inside another package (i.e. parent package) using Execute Package Task. The task always fails. It seems strange enough.
The child package has two variables that need to be passed in from parent package.
Can any expert here please help out? Thanks.
- Steve
View 10 Replies
View Related
Oct 15, 2007
Hi,
I have an FTP task on a package that runs every hour, downloads files from FTP and processes them.
If there are no files, the package should stop successfully after the FTP task, but the problem is that it fails because there are no files.
How can I avoid this?
And another question is there another way to download files and delete then with out another FTP task?
Thanks
View 4 Replies
View Related
Apr 15, 2001
We have changed the Network Domain name of a SQL server and restarted before changing any of the settings in SQL server. When we now try to start the SQL server service manager we get the following error
Your SQL server is either corrupt or has been tampered with. Unknown package id please rerun setup
Any suggestions on how to get the SQL server back on line without having to take the server down and changing the Netowrk Domain Name back ??
Cheers
SR
View 1 Replies
View Related
Nov 16, 2005
Hi, I've just tried to install SQL Server 2005 Standard and I'm getting an error that I can't find any information on. In the log, I find Error 29503. A message after it indicates that it couldn't start the server.
View 11 Replies
View Related
Feb 9, 2005
I searched the forum's threads on this, and while there were many results, none have helped so far.
I am running a DTS package that is an ACtiveX Script Task using VBScript. The script uses CreateObject() to create a FileSystemObject to copy an .MDB before importing the tables into SQL Server. I want to copy it because of Access' notoriety of corrupting, and this much data being pumped out of Access could force me to Compact & Repair. I would rather do that on a copy.
Function Main()
Dim FSO
Set FSO=CreateObject("Scripting.FileSystemObject")
FSO.CopyFile "\<server><Share>Data.mdb", "\<server>C$DataCopyData.mdb"
Main = DTSTaskExecResult_Success
End Function
The DTS Package runs when I execute it from Ent. Manager, of course. It fails if scheduled, or course :(
I have set the Owner of the Scheduled Task to my domain account, which is also in the Adminstrators Group on the physical server with the SQL Server installation (Windows 2003 Server). I also did the unnecessary task of adding my domain account specifically to the destination folder, which is also Shared.
My sqlagent.exe service runs as SYSTEM on the server, so the SQLAgent should have no problem copying a file from one folder on the server to another.
The Scheduled Task fails with the common error:
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSActiveScriptTask_1
DTSRun OnError: DTSStep_DTSActiveScriptTask_1, Error = -2147220482 (800403FE)
Error string: Error Code: 0
Error Source= Microsoft VBScript runtime error
Error Description: Permission denied
Error on Line 12
Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts80.hlp
Help context: 4500
Error Detail Records:
Error: -2147220482 (800403FE); Provider Error: 0 (0)
Error string: Error Code: 0
Error Source= Microsoft VBScript runtime error
Error Description: Permission denied
Error on Line 12
Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts80.hlp
Help context: 4500
DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1
DTSRun: Package execution complete.
I checked this MS KB Article (http://support.microsoft.com/kb/q298725/), but the instructions after opening DCOMcnfg.exe do not follow what is shown in the WMI window on Windows 2003 Server :rolleyes: (i.e. there is no "Default Security" tab to click.)
I am at a loss here. Thanks for your help.
View 4 Replies
View Related
Apr 3, 2014
We are running SQL Server 2012 SP1 64-Bit EE on Windows Server 2008 R2 SP1. I have a SSIS Package which connects to a FTP Site and downloads a file. Then it truncates a table and loads the file data into a table. This package works okay when executed from within VSS and SSMS (In SSISDB, right click on the package and execute). However, when I execute it as a Job it does not run and appears to be failing on the first task which is the FTP Task. SQL job step - Type: SSIS Package; Run as: SQL Server Agent Service Account (domain account called playuser); Authentication: Windows Authentication.In the All Executions Standard Report for the SSISDB Catalog, it only says: FTP Download File: Errors: There were errors during task validation.
Is this because my domain account does not have access to the FTP Site?Is this where I need to come up with a Proxy Account with Credentials?Do I need to set up a SQL Server Login (Proxy Account) with the same username being used in the FTP Batch file?
FTP Commands in a batch file:
username
password
cd omb
asc
get STRMASTER
quit
View 3 Replies
View Related
Mar 19, 2008
I have a Execute SQL Task that calls a stored procedure. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. It has a date parameter, but hard coding the date parameter does not work either. I checked the permissions on the Stored Procedure and SQL Agent, which are ok. When I change BypassPrepare to True, the query will execute and insert the rows to the required table. If someone has an explanation for this, I would appreciate some sql enlightenment. Thanks.
Dan
View 6 Replies
View Related
May 9, 2007
Hey,
I seem somehow stuck in some Script Task problems in SSIS on a x64-environment which has SP2 installed already.
If I'm running the package in 32-bit mode, I'm continuously getting the following error
"Warning: Precompiled script failed to load. Attempting to recompile. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885)."
on one of the package's scripts --
the given links advises to install SP2... what a useless hint.
And if I switch the project to run in Run64BitRuntime=True , another script tasks complains
"ScriptTask_78888010d24c477ea7c8d69f4f5568a5 is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
-- whatever that might mean...
Maybe I should add that the packages were running in 32-bit mode for the last 12 months now. Without any problems like that.
Those effects are occuring since we put SP2 onto the server...
Any comments on this topic? Similar experiences? Maybe yet some solutions too?
Regards, Frank
View 4 Replies
View Related
Mar 11, 2006
Hello,
I have two FTP Tasks configured in my SSIS package. One is for "Receive files" and the other is set for "Delete remote files." Both use variables for the source/destination paths. My remote path variable contains a wild card in the name field such as /usr/this/is/my/path/*.ext and it is working to FTP all the .ext files to my working directory. I then rename the files and want to remove the original files from the FTP server. I use the same variable as the remote path variable in the delete as I do in the receive.
Using the same FTP connection manager for both tasks I am always getting a failure on the delete. The FTP connection manger is setup to use the root user. Using a terminal I am able to open an FTP connection to the server and remove the files manually. There doesn't seem to be any detailed documentation on the FTP Task configured for Delete remote files so I'm hoping someone might have some insight to the problem.
I receive the same message for each of the files that was downloaded:
Error: 0xC001602A at MyPackage, Connection manager "FTP Connection Manager": An error occurred in the requested FTP operation. Detailed error description: 550 usr hisismypathdatafile1.ext: No such file or directory.
The attempt to delete file "usr hisismypathdatafile1.ext" failed. This may occur when the file does not exist, the file name was spelled incorrectly, or you do not have permissions to delete the file.
With the root user/working manually I'm not understanding the permission reason, the file does exist and is spelled correctly.
Dan
View 21 Replies
View Related
Apr 26, 2008
I have a SSIS Execute SQL Task that calls a stored procedure with a date parameter. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. Setting ByPass Prepare to True does not affect the outcome. I also used the query directly in the SQL task itself to no avail. Executing the query in Query Analyzer works. Any assistance would be greatly appreciated.
Dan
View 6 Replies
View Related
May 7, 2006
I have a SSIS package with an FTP task to download a Excel file and populate a table using an excel connection mnager and a SQL Server Destination and it always fails with the following error when scheduled:
The job failed. The Job was invoked by User sa. The last step to run was step 1 (FTP-DM-CRN_ALLOCATION_COMMENTS).
Executed as user: WEB-INTSQLSYSTEM. The package execution failed. The step failed.
The box on which SQL Server is installed is on a workgroup on the domain and the SQL Server is started up by the Local System user on the box.
I am thinking this has to do with windows security based on all the information that I have read on these kind of error messages. Any input on resolving this will be much appreciated.
Thanks,
MShah
View 1 Replies
View Related
