I modified something on the package, saved it and click on build. When i ran the package, it hit an error. when i saw the object that has an error, it was the one i modified. my changes were not applied. i stopped the runtime. and double click again on that package, it reflected my changes. why during runtime it's showing the old version? what's the proper way of saving the package and building it? What's the different of Build and Rebuild?
I installed RS 2005, SP1 and then the rollup fix 2153 however; if I run http://server/reportserver or view the reportserver log file, it shows version 2047 which is the SP1 version. I have added the tail end of the rollup hotfix log file which shows I have installed it.
Is this a known issue?
06/14/2006 16:03:57.153 Failed to read version information for the following file: C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesReportServerCatalog.sql 06/14/2006 16:03:57.169 Failed to read version information for the following file: C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesReportServerStylesHtmlViewer.css 06/14/2006 16:03:58.216 Attempting to install file: sqlrun_rs.msp 06/14/2006 16:03:58.263 Attempting to install file: \NLDN9577DWWd$89a527f93aa2bb044103hotfixrsFilessqlrun_rs.msp 06/14/2006 16:03:58.278 Creating MSP install log file at: C:WINDOWSHotfixRS9LogsRS9_Hotfix_KB918222_sqlrun_rs.msp.log 06/14/2006 16:03:58.294 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller 06/14/2006 16:03:58.294 Failed to read registry key: Debug 06/14/2006 16:04:44.826 MSP returned 0: The action completed successfully. 06/14/2006 16:04:45.092 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller 06/14/2006 16:04:45.107 Failed to read registry key: Debug 06/14/2006 16:04:45.123 Successfully installed file: \NLDN9577DWWd$89a527f93aa2bb044103hotfixrsFilessqlrun_rs.msp 06/14/2006 16:04:45.139 Restarting RS Service ReportServer since it was previously running 06/14/2006 16:04:45.154 Attempting to start service: ReportServer 06/14/2006 16:04:51.936 Successfully started service: ReportServer 06/14/2006 16:04:51.983 Successfully installed target: NLDN9577DWW 06/14/2006 16:04:51.998 Successfully installed instance: MSSQLSERVER 06/14/2006 16:04:52.014 Successfully opened registry key: SoftwareMicrosoftWindowsCurrentVersionUninstall 06/14/2006 16:04:52.608 06/14/2006 16:04:52.623 Product Status Summary: 06/14/2006 16:04:52.639 Product: SQL Server Reporting Services 2005 06/14/2006 16:04:52.701 MSSQLSERVER - Success 06/14/2006 16:04:52.717 06/14/2006 16:06:05.500 Hotfix package closed
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio ------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported. Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611. OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551. OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name]. OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name]. OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name] FROM DISK = '[Path to back up file]' WITH REPLACE, MOVE 'ASP_Live_Data' TO [Path to MDF file], MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name] FROM DISK = '[Path to backup file]' WITH REPLACE, MOVE 'ASP_Live_Data' TO [Path to MDF file]', MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
I have received the error message "Package migration from version 8 to version 6 failed".I have developed a SSIS package with Visual Studio 2013 which gives me PackageFormatVersion of 8. I then deploy my package to the ssisdb catalog that is running on a SQL Server 2012, this works fine but when I try to execute the package the error arises…due to SQL Server 2012 has a PackageFormatVersion of 6 and it can’t run something that has a greater version.I haven’t seen any good solution for this but one that would work for me would be to upgrade the Integration Services Server from 2012 to 2014, leaving everything else in 2012 (database, ssms, ssas, ssrs).Would this solve the package format problem? Would I then be able to execute my packages in the ssisdb catalog?
Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
I have the trial version of SQL Server 2005 installed and have setup a couple of databases. This trial version will expire in another few weeks. I recently purchased a copy of the software and want to install it. Will I lose my databases, user info, etc? How do I go about installing without losing anything?
We have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings: Package Errors: The version of component "****" (11773) is not compatible with this version of the DataFlow. Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly. The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1". component "Agreement File" (11773) failed validation and returned error code 0xC0048021. One or more component failed validation. There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Hello, I installed the SQL Server 2k EnterPrise version and developer version on the same version, and the developer version is an instance "Development". How do I expose both of them to internet? Just open both of them to port 1433? And on the client side, just say IP and IP/Development? Do I need specific set up, will they conflict? Thanks,
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'C.0.8.54'. the expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. I'm getting this whenever try to access the report server via SSMS, I have tried to upgrade via the Reporting Service Configuration Manager but get an error message similar to above except it says: The database version (C.o.8.54) does not match your Reporting Services installation. This version of the database cannot be upgraded. You must use a different database. Has anyone seen this before? I can create a new database, but don't want to loose all my reports. Any ideas. Oh, not even sure if the backups exist from before this error, I've spent 2 weeks trying to get access to the server so I could try to upgrade, only to get the above results. Thanks for your help, David
I downloaded the 101 Samples installation (i.e. 101SamplesCS.msi) from Microsoft's website, which contains SQL Server database files.
While working with the databases in the "Data Access" samples from the 101 Samples projects, I get the following error:
"Database <mdf_name> cannot be upgraded because its non-release version (600) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this version of sqlservr.exe. You must re-create the database..."
I assume the database files were created with a beta or CTP version of SQL Server 2005. Does anyone know where I can get an updated version of these database files or scripts to update them?
Can I set up sql server 7.0 standard version in cluster enviorment, what the different betwent sql server 7.0 enterprise version and standard version? any problem I may encouter when I install the SQL server 7.0 standard version in Cluster enviorment? Thank you very much. Judy
We have a Sqlserver 2005 Installed on One of our servers.I wanted to know whether the installed database is a Evaluation copy or Licensed Copy.How to Evaluate this. Do we have to check any Log files etc for knowing whether it is evaluation copy or Licensed copy. Please help me Asap. thanks in Advance
Does anyone know how to get SQL Server versions, Service pack versionsand the Server that instance of SQL is running on a network. I haveseen some threads on how to list SQL servers in a network but I need tofind more info about these SQL servers.Any help appreciated..!Thx...
we have a backup of a database from a release version with version number 9.00.1399 and we wanted to restore it to a server with version number (9.00.1116) CTP release. we were issued a version incopatibility message. is it possible to backup from a 9.00.1399 release with a backup file compatible for a CTP release, is there an available option during backup? thanks!
I ask because I was testing a Source Control solution that uses SQL Express for its database component, and when I tested it in March it worked fine, but now I can't get the Source Control software to recognize that the database is there. It creates it just fine, it just can't seem to look inside the database instance.
I've tried manipulating ports, assigning permissions, browser on, browser off, I've been at this for about a week.
The Source Control software provider won't provide any information on configuring SQL Express, so I'm here.
SELECT sysjobs.name, sysjobservers.last_run_outcome, CONVERT(varchar(8), sysjobservers.last_run_date, 112) AS LastRunDate, CONVERT(varchar(8), sysjobservers.last_run_time, 8) AS LastRunTime, GETDATE() AS CurrentDateTime FROM sysjobs LEFT OUTER JOIN sysjobservers ON sysjobs.job_id = sysjobservers.job_id WHERE (sysjobservers.last_run_outcome = 0) AND (CONVERT(varchar(8), sysjobservers.last_run_date, 112) >= DATEADD(day, - 1, GETDATE()))
I am wanting a similar solution, I need to convert an "int" to a time format, when I use this where ">= DATEADD(minute, - 720, GETDATE())" for the last_run_time I get this error:
Syntax error converting datetime from character string.
I have two tbls joined via a varchar field.. which in tbl I have to use a CASE statement to format it correctly for the JOIN..
All works well.. however, if I add a WHERE clause to the statement, with the WHERE clause affecting only one of the JOINED tbls.. All the NULLS are not shown.
I should get results like:
Postcode Count
tf4 0 tf5 23 tf6 15 tf7 0 etc
Whereas, when I add the where clause, none of the "zeros" are shown, so I get:
tf5 23 tf6 15
Why is this?
Here's the SQL:
SELECT ISNULL(COUNT(CASE LEN(REPLACE(dbo.Customers_Trade.PostCode, ' ', '')) WHEN 5 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 2) WHEN 6 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 3) ELSE LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 4) END), 0) AS PCCount, dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country, dbo.UkPostcodes.Master_Account FROM dbo.UkPostcodes LEFT OUTER JOIN dbo.Customers_Trade ON dbo.UkPostcodes.Postcode = CASE LEN(REPLACE(dbo.Customers_Trade.PostCode, ' ', '')) WHEN 5 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 2) WHEN 6 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 3) ELSE LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 4) END WHERE (dbo.Customers_Trade.TradeCustomerID IN (SELECT DISTINCT TradeCustomerID FROM dbo.Orders_Trade WHERE (DATEDIFF(d, order_date, GETDATE()) < 60))) AND (dbo.Customers_Trade.is_activated <> 'No') OR (dbo.Customers_Trade.BillingAccountID <> '') AND (dbo.Customers_Trade.BillingAccountID IN (SELECT DISTINCT TradeCustomerID FROM dbo.Orders_Trade WHERE (DATEDIFF(d, order_date, GETDATE()) < 60) AND (is_activated <> 'No'))) GROUP BY dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country, dbo.Customers_Trade.Master_Account, dbo.UkPostcodes.Master_Account
does not show the nulls:
where as:
SELECT ISNULL(COUNT(CASE LEN(REPLACE(dbo.Customers_Trade.PostCode, ' ', '')) WHEN 5 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 2) WHEN 6 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 3) ELSE LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 4) END), 0) AS PCCount, dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country, dbo.UkPostcodes.Master_Account FROM dbo.UkPostcodes LEFT OUTER JOIN dbo.Customers_Trade ON dbo.UkPostcodes.Postcode = CASE LEN(REPLACE(dbo.Customers_Trade.PostCode, ' ', '')) WHEN 5 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 2) WHEN 6 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 3) ELSE LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 4) END GROUP BY dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country, dbo.Customers_Trade.Master_Account, dbo.UkPostcodes.Master_Account
I am using the Server Explorer in VS2005. I have created an additional field in a small test table with 3 other fields. The new field called foo_key does not show up when I query the table ( it has 7 records ).
I have some tables that I'd like to insert an auto-incrementing integer primary key. But at this point I cant figure out what's wrong. I have toggled the field as primary key on and off.It seems if I create a new table, then I see the primary key field and its autoincrementing as desired.
Could it be that I cannot add such a field if my table already has some records ? ...and to get one in would mean rebuilding a new table and shifting the records....pls advise
SELECT dbo.VIEW1Client.ID, dbo.VIEW1QA.Score, dbo.VIEW1Client.Score AS Score2, CASE WHEN dbo.VIEW1Client.Score = dbo.VIEW1QA.Score THEN 1 ELSE 0 END) AS Calibrate FROM dbo.VIEW1QA CROSS JOIN dbo.VIEW1Client WHERE dbo.VIEW1Client.ID = '1'
View Table 4: (I created a view table using View Table 3 to get the average and it seems not providig the right average, instead I get 0:
SELECT ID, AVG(Calibrate) AS Perc FROM dbo.VIEW3 GROUP BY ID
SELECT COUNT(dbo.UkPostcodes.Postcode) AS PCCount, dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country FROM dbo.UkPostcodes LEFT OUTER JOIN dbo.Customers_Trade ON dbo.UkPostcodes.Postcode = CASE LEN(REPLACE(dbo.Customers_Trade.PostCode, ' ', '')) WHEN 5 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 2) WHEN 6 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 3) ELSE LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 4) END
GROUP BY dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country
The query should take all of the UK postcode regions (districts) and then match them up to the postcodes in a customer tbl...
What I'm trying to show is the count for postcode resutls, even the postcodes where there are no customers.
I have two different reports and in these two reports one contains images which is working fine at development site as well as server site but when same report is called from another report using linking facility given in sql report images disappears on server site at development site it is working fine.
how can i show the values of my database in for example texbox.can u give me some simple code on how to connect to my SQldatabase server express? and how i can retrieve the file?thnx
