OleDb Source Error - Connecting To Oracle 9i
Nov 14, 2006
Hi,
I have my datasource in Oracle9i and destination is Sql2005. I am connecting to Oracle 9i through OLEDb provider and when I connect to my DataSource using OLE DB Data Source, I get the following error:
Warning at "guid code": Cannot retreive the column code page info from the oledb provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale Id will be used.
Could anyone please help me trouble shoot this problem.
Regards,
Sudhakara.T.P.
sudhakaratp@hotmail.com
View 3 Replies
ADVERTISEMENT
Mar 18, 2008
Help, I'm attempting to connect to an Oracle 8 database using the microsoft OLD DB for oracle driver.
It works fine connecting to a 9i database but when I attempt to connect to the 8 database I get ORA-12537 TNS Connection Closed.
I can connect to the database fine using sqlplus on the machine.
Any ideas would be appreciated.
Thanks
Stapsey
View 1 Replies
View Related
Mar 16, 2007
Guys,
I am having a nightmarish time getting an Oracle Connection Manager working as a source in my SSIS package.
The CM is called "OLTP_SOURCE". When I inspect the configuration and test connection, it succeeds, however when I go to run the package (both in debug mode and via DTEXECUI) I get the following error:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
After this happens, if I go into an OLE DB Source within a DFT, I get the following:
No disconnected record set is available for the specified SQL statement.
Now, if I go back into the CM, enter the password and test, it succeeds. From this point, I will go to preview the data in the OLE DB Source, and it comes back fine. However, when I go to run the package, I get the same error time and time again:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
The quick reader will suggest that the password is not being persisted. To this end, I have tried each of the following techniques to no avail:
1. Double, Triple and Quadruple check that the "save" password option in the CM is checked.
2. Hardcode the connection string in the dtsx XML-behind.
3. Enable Package Configurations and hardcode the connection string in the dstsconfig file.
4. Run the dtsx file using DTEXECUI, providing it with the configuration (that includes the hard-coded password).
5. Run the dtsx file using DTEXECUI, providing it the connection string in the Connection Managager override UI.
Can anyone help shed some light on what might be going on? So far, it is obvious that there has to be something that I am doing wrong because (syntax dialect differences aside) I can't imagine that Oracle sources should be this much of a headache.
Thanks,
Rick
View 3 Replies
View Related
Jul 5, 2006
Provider cannot derive parameter information and SetParameterInfo has not been called. (Microsoft OLE DB Provider for Oracle)
I am getting the above error while opening the parameter box at OLEDB source for Oracle using SQL command option at Data Access Mode?? Can you any one please help me in this regard and trouble shoot this problem..
View 8 Replies
View Related
Oct 10, 2006
Hi all,
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
View 5 Replies
View Related
Oct 26, 2007
Hi,
I'm trying to use query parameters with an Oracle OLEDB Source in a data
flow task and I'm having problems.
I've tried formatting the query each of the following ways...
--
select
frq_code,
frq_name,
update_frq,
uptime_frq
from frequency_bcs
where update_frq > ?
and update_frq <= ?
--
Parameters cannot be extracted from the SQL command. The provider might not
help to parse parameter information from the command. In that case, use the
"SQL command from variable" access mode, in which the entire SQL command is
stored in a variable.
Additional information
---> Provider cannot derive parameter information and SetParameterInfo has
not been called. (Microsoft OLE DB Provider for Oracle).
View 7 Replies
View Related
Apr 26, 2007
Hi,
Urgent Help required..........
Can anyone explain me steps how to parameterized query to send oracle.
If you know any other control which help to do this rather than OLEDB source.
Please let me know.
THanks
View 18 Replies
View Related
Nov 12, 2007
I am using execute sql task to run a stored procedure in oracle database which returns a resultset. This works. Now I need to send the ouput to a destination table in a sql database. Should I use for each loop to pick the resultset and insert it into the destination one by one (which I dont think is a great idea) or is there a better way to accomplish this task (in data flow task) ?
When I use dataflow task instead of execute sql task, the main issue is I am not able to see the output columns when I execute an oracle stored procedure, but when I see the preview I can see the resultset . But I can see the output columns for a sql server stored procedure.
View 9 Replies
View Related
Nov 1, 2006
Hello All,
I have a unique problem while connecting to oracle source with a 64 bit processor. I can connect to the oracle from the command prompt in the 64 bit processor but not from SSIS.
The acutal problem is, when check the properties of the connection manager and provide a provider for oracle, and then provide username and password and click on test connection. I get the following error:
"Test Connection failed because of an error in initializing provider.ORA-06413: Connection not open"
Regards,
Raju
View 3 Replies
View Related
Feb 28, 2008
Hi All:
I have a SSIS which have a main connection to a SQL Server 2005 DB, and also another connection to a Oracle database, and fetch data from the Oracle db.
I have the 2 connection managers, and everything runs fine when I test it in dev studio.
However, once I imported it to the DB, and run it on command line, I get the "Class not registered" error.
Log file as follows:
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:23:53 PM
Info: 2008-02-28 13:23:53.91
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_SOURCE";".
End Info
Info: 2008-02-28 13:23:54.03
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_USER";".
End Info
Info: 2008-02-28 13:23:54.05
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_PWD";".
End Info
Error: 2008-02-28 13:23:54.55
Code: 0xC0202009
Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-02-28 13:23:54.56
Code: 0xC00291EC
Source: Execute SQL Task Execute SQL Task
Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection.
End Error
Warning: 2008-02-28 13:23:54.58
Code: 0x80019002
Source: CRDA_D_GIM_CONN_TEST
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 1:23:53 PM
Finished: 1:23:54 PM
Elapsed: 1.547 seconds
I DID TRIED MY BEST to search before posting, and most of them are having problem with 32 bit and 64 bit executions.
However, in my case, both are 32 bit (as shown in the log file).
In the above test, I'm setting DoNotSaveSensitiveData, and then fetch it with package configuration.
To make sure the package configuration is not creating pblm for me, I also tried to hardcode everything in the package, and then encrypt the whole ssis with password, and run the package with the /DECRYPT option, so that everything is already intact.
But I still get the same error. Log file as follows.
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /De "painful" /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 2:24:25 PM
Error: 2008-02-28 14:24:27.11
Code: 0xC0202009
Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-02-28 14:24:27.14
Code: 0xC00291EC
Source: Execute SQL Task Execute SQL Task
Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection.
End Error
Warning: 2008-02-28 14:24:27.14
Code: 0x80019002
Source: CRDA_D_GIM_CONN_TEST
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:24:25 PM
Finished: 2:24:27 PM
Elapsed: 1.422 seconds
Can anyone suggest what is missing ?? or what can be done ??
Any pointers are greatly appreciated.
Thanks,
- Henry.
View 18 Replies
View Related
Nov 6, 2007
This might be an ignorant question, but I can't figure this out.
What is the purpose of the Error output data flow from the OLEDB Source? I am trying to understand an example of what kind of "error" would cause a row to go down this path, and I can't come up with one.
Does anyone have a good example of how this could be useful?
View 5 Replies
View Related
Sep 11, 2007
I am trying to execute a SP like below in OLEDB source in data flow... and this statement include the insert stament ( row by row transaction).. I would like to creat an error hadling logic so that if the trasaction fail to insert the row then ignore that particular row then, move to the next row without stopping the whole process.. how can i do this?
exec usp_Inert_Registration_Episodes_Assessments
@Unique_ID=?,
@Gender_Cd=?,
@Birth_Date=?,
@Race_Ind=?,
@Ethnicity_Cd=?,
@Registration_Dt=? ,
--
--@Object_Key
View 16 Replies
View Related
Feb 9, 2006
Hi
I am using Oledb Provider for Db2 from IBM. (There is another one from microsoft)
Through this provider I am constructing a oledb connection manager.
This connection manager I am Using in Oledb Source adapter.
Now when I set Data Access mode as Table or view I Am able to preview the data.
But when I use Data Access Mode as SQL Command try to preview I get this Error
TITLE: Microsoft Visual Studio
------------------------------
Error at s_NEWMAPPING10 [EMP [1]]: An OLE DB error has occurred. Error code: 0x80040E21.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0202009 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
I am not able to figure out how to resolve this.
View 3 Replies
View Related
Feb 6, 2007
While upgrading several packages from DTS 2000 to SSIS I came across a couple of packages where the source data comes from an Oracle DB. Until now I have not migrated data from an Oracle source.
When I tried to create a new connection I got the error:
"System.Data.Oracle client requires Oracle client software version 8.1.7 or greater."
This is being developed on a machine that would not have any oracle drivers before now, so I THOUGHT it would be as simple as downloading the drivers, but the resolution seems to be much more complex than that. When I researched it, it appeared that I needed to download the Oracle 9i software. The installation is about 10 GB and this seemed like overkill to just be able to connect to a database.
Is this in fact the correct solution? If so, or even if not, can I get a quick run down of the steps involved, and anyone's experience (problems, etc..) on the topic?
View 5 Replies
View Related
Nov 4, 2007
Hi,
I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:
Message
Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.
I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job.
View 2 Replies
View Related
Feb 22, 2006
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
View 17 Replies
View Related
Aug 23, 2007
Hi everybody,
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails.
I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Please suggest me wht should i do know?
Thanks in advance
Regards
Arvind L
View 3 Replies
View Related
Sep 10, 2007
Hello All
I was trying to configure my package. I have a Oracle 10g DB as source. I used "Oracle provider for OLE Db" as provider in connection manager. I entered user name and password.
When I set my package protection level to : DontSaveSensitive and executed the package
it gives me this error:
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01005: null password given; logon denied".
When i go back to connection manager I see the blank password. I retype it but again when I execute I get the above error.
I configured the package with same setting and in the config file I mentioned the passwords and all details but again I when I execute the package i get the below error:
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Since it was not storing password OR not executing without password I set the Protection Level to : "EncryptAllWithPassword"
and excute it I works Great. and runs Awesome. Except I get this Warning
[OLE DB Source [1]] Warning: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
Question 1: "CAN I IGNORE THIS WARNING?'
Question2: "THE PACKAGE RUNS GOOD WHEN I SET THE PROTECTIONLEVEL =EncryptAllWithPassword. With this settings when i configure my package it gives me error. Why is it so Any Help please Below plz find the config file?"
[OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "WDEV.wuser1" failed with error code 0xC0202009.
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
x<?xml version="1.0" ?>
- <DTSConfiguration>
- <DTSConfigurationHeading>
<DTSConfigurationFileInfo GeneratedBy="AWM" GeneratedFromPackageName="Package1" GeneratedFromPackageID="{289810A-ASD0-4698-BAC5-3270D3E5D17D}" GeneratedDate="9/9/2007 10:18:10 PM" />
</DTSConfigurationHeading>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>Provider=OraOLEDB.Oracle.1;Data Source=WDEV;User ID=wuser;Password:XYZ;</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.ccuser1].Properties[InitialCatalog]" ValueType="String">
<ConfiguredValue />
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[Name]" ValueType="String">
<ConfiguredValue>WDEV.wuser1</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[Password]" ValueType="String">
XYZ<ConfiguredValue />
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[ServerName]" ValueType="String">
<ConfiguredValue>WDEV</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[UserName]" ValueType="String">
<ConfiguredValue>wuser</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Properties[PackagePassword]" ValueType="String">
<ConfiguredValue /> AWM
</Configuration>
</DTSConfiguration>
Thanks a lots
View 2 Replies
View Related
Aug 30, 2007
Hi,
I was trying to connect to Oracle Source in SSIS
1. Err: Test connection failed because of an error in initializing provider. Oracle Client and networking components were not found
Sol: I installeed the Oracle Client tools
2. Err: ORA -12154: TNS: Could not resolve teh connect identifier specified
Sol: Then I point out the TNS file
3. Now I coonect the Oracle db . I go to Connection Manager . Specifies the provide as: Native OLE DB Oracle Provide for OLE DB, Select my DB, provide teh user name and password. and check if the connection passed.
Then in my data Flow Task when I add this source and check the Colmns its gives me an error./ sort of warning
The component reported the following warnings:
Warning at {C947B.......} [Ole DB Source[1]]: Cannot retrieve the column code page info from the OLE DB provider. if the components supports teh "DefaultCodePage" property, the code page from that property will be used.....
Will this warning has an significance. i dont see any error in my output data. but is there something I m doing wrong.
4. When I set my ProtectionLevel under Security in package property to "Dont Save Sensitive" in order to easily configure the package I m getting this error: failed Validation. The default one was EncryptSensitiveWithUserKey then its running smoothly.
Can somebody advice me on this?
I addded the all the errors and solution for 1 and 2 becuase in that way this will be helpful in future.
View 5 Replies
View Related
Mar 4, 2008
Hi,
I have several oracle reports which running in SharePoint Integrated mode. They were working well when the SharePoint server and report server in same machine. But after that the report server move out to another machine, we got the problem with connection to oracle databasen. Reports with Sql server as data source has no problem at all.
We have installa both oracle client and odp.net in both machines, and tried to give Network Service full access right in
Bin catalog in oracle client but nothing helps. Please help!!!!!
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'Ellentst'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
In log file:
Cannot create a connection to data source 'DatabasName'. ---> System.Exception: System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
We have installed oracle client version 10.2.0 in both machine.
View 2 Replies
View Related
Dec 8, 2006
In ODBC Data Source Administrator, I add the SQL Server driver, complete a name and select my local SQL Server instance, select Windows NT authentication (the client configuration is set to TCP/IP, dynamically determine port) and on clicking Next, the following errors occur:
Connection failed:
SQLState: '01000'
SQL Server error: 2
[Microsoft][ODBC SQL Server Driver][Shared Memory][ConnectionOpen (Connect()).
Connection failed:
SQLState: '08001'
SQL Server error: 17
[Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.
I note that in the Help it says: "The SQL Server system administrator must have associated your Microsoft Windows login with a SQL Server login ID".
Is this the problem? If so, where do I make this association?
Thanking you in anticipation.
View 2 Replies
View Related
Sep 12, 2007
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query?
Thanks.
View 4 Replies
View Related
Jan 24, 2007
hi,
can i use the acquireconnection method to an oledb for oracle connection manager?
View 1 Replies
View Related
Jul 13, 2006
Hi,
I can connect to a remote SQL server with ADO.NET but not with OLEDB.
I get
------------------------------
Test connection failed because of an error in initializing provider. Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [233].
------------------------------
Through the SQL Server Connection Manager, if I disable Named Pipes and enable TCP/IP, I get for OLEDB connection:
------------------------------
Test connection failed because of an error in initializing provider. Unable to complete login process due to delay in opening server connection
------------------------------
with Connection and General Timeout are both 0.
Appreciate the help
Gulden
View 6 Replies
View Related
Mar 6, 2006
i notice that in toolbox panel, there are these kind of different dataadapter and dataset, what is difference between them, and under which situation we use which one?
View 2 Replies
View Related
Jan 29, 2008
I have several SSIS packages that test out without problems on my dev box when connecting to an Oracle server, both from inside BIDS IDE and from the command line with DTexec. The problem happens when running these packages from the app server that will be used for production; the packages get through the validation, preparation and pre-execution phases but crash when starting the execution phase with this error:
" Code: 0xC0202009
Source: Import Level tables Level1 Source [1261]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E07.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E07 Description: "ORA-01861: literal does not match format string".
I've Googled this and it often refers to a date issue. I am not writing to Oracle but importing to SQL Server by using SSIS import tasks, and my question is why would this work without problems from my box but not on this app server? Both machines have the same version of Oracle client installed. My box has the client SQL server with BIDS and the app server only has the full version of SSIS without SQL Server installed. At this point I'm trying to determine if this is an Oracle issue or SSIS. Any ideas?
View 7 Replies
View Related
Nov 23, 2006
Hi,
Previously i was using oracle8i with ssis.ssis was working fine.later i have upgraded 8i to oracle 9i.now when ever i try to establish a new connection using Microsoft OLEDB Provider for Oracle.i am getting the following error "Oracle error occurred, but error message could not be retrieved from Oracle" .but i am able to access the oracle 9i database thru pl/sql and toad. what could be the problem?
Thanks
Jegan.T
View 2 Replies
View Related
Jan 15, 2008
I was having one package which uses a source query in OLEDB Source Control and fetches the record and a couple of lookups and then an oledb command to insert/update the records in the table using as SP. I changed the source query(Infact the package) and removed in lookup and a different SP was called similar to the old one. But my problem is the package which was before taking only minutes to update 50,000 records is now taking more than 2 hrs. The problem is the number of records it is fetching from the source each time is very less.. its fetching hardly 500 records a time compared to nearly 2500 records before. Where am i going wrong? Any suggestion greatly appreciated.
View 5 Replies
View Related
Feb 12, 2008
Hi,
I am running an MDX query in SSIS but I don't know what is the best way of doing this, performance wise.
I know I can run the MDX query through an openquery in the OLEDB, and also run it through a Datareader, no openquery needed.
I know the datareader is slower in a normal basis due to .Net, but in this case the OLEDB is running an open query to a linked server which won't be fast like running a regular SQL.
If anyone knows which of this two run faster in this scenario I'll appretiate if you let me know.
View 1 Replies
View Related
May 11, 2007
Hi,
Firtsly - I am new to SSIS if my approach could be improved then I welcome suggestions.
Scenario: I have a large SSIS package that consolidates / summarizes work week information from several data sources. Currently each data flow task in the control flow calculates the from and to date that is filtered on, for example:
DECLARE @FromDT AS DATETIME
SET @FromDT = CAST(FLOOR( CAST( DATEADD(D, -7, GETDATE()) AS FLOAT ) ) AS DATETIME)
DECLARE @ToDT AS DATETIME
SET @ToDT = CAST(FLOOR( CAST( GETDATE() AS FLOAT ) ) AS DATETIME)
I would like to remove these statements that appear in most steps and replace them with a global variable that is used throughout the package. This statement would only appear once & it would make the package much easier to run after failure etc.
Problem: I am using Data Reader Source with the 'SQLCommand' property specified. It looks like parameters are only supported if an OleDB connection is used?
So I switched to an OleDB connection and no parameters are recognised in the string - a forum search reveals that parameters in sub queries are not always found properly. The solution to this problem appears to be, to set 'Bypass Prepare' to True but this is a property for the Execute SQL task, not the Data Flow Task source.
Questions:
Does the Data Reader Source control from Data Flow Source toolbox section support parameters?
Can anyone suggest a fix to the OleDB Source issue with Parameters?
Is there a better way to solve my problem e.g. Using Execute SQL Task instead of Data Flow tasks etc
Example SQL:
This SQL is an example of the SQL for the OleDB Data Source (within a Data Flow task)
------------------------------
--RADIUS LOGINS
------------------------------
DECLARE @FromDT AS DATETIME
SET @FromDT = CAST(FLOOR( CAST( DATEADD(D, -7, GETDATE()) AS FLOAT ) ) AS DATETIME)
DECLARE @ToDT AS DATETIME
SET @ToDT = CAST(FLOOR( CAST( GETDATE() AS FLOAT ) ) AS DATETIME)
DECLARE @Attempts AS BIGINT
SET @Attempts =
(SELECT COUNT(*)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN @FromDT AND @ToDT)
DECLARE @Failures AS BIGINT
SET @Failures =
(SELECT COUNT(*)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN @FromDT AND @ToDT
AND Authen_Failure_Code IS NOT NULL)
DECLARE @Successes AS BIGINT
SET @Successes = @Attempts - @Failures
DECLARE @OcaV1Hits AS BIGINT
SET @OcaV1Hits = (SELECT COUNT(DISTINCT LoginName)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN
@FromDT AND @ToDT
AND EAPTypeID = 25)
DECLARE @OcaV2Hits AS BIGINT
SET @OcaV2Hits = (SELECT COUNT(DISTINCT LoginName) AS OcaV2Hits
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN
@FromDT AND @ToDT
AND EAPTypeID = 13)
SELECT
@Attempts AS ConnectionAttempts,
@Failures AS ConnectionFailures,
(CAST(@Successes AS DECIMAL(38,2)) / CAST(@Attempts AS FLOAT) * 100) AS SuccessRate,
@OcaV1Hits AS OcaV1Hits,
@OcaV2Hits AS OcaV2Hits
Please remember, I'm new to SSIS - so be detailed in your response. Thanks for your help!
View 5 Replies
View Related
Jun 21, 2006
Iam migrating data from one database to another .I want give input of that source and traget database names through globally declared user variables (@sourcename,@targetname)
How i can map the variables in OLE DB Source ..i dint find any option to that .
Can somebody help ?
Thanks
Kumar
View 1 Replies
View Related
Jan 23, 2001
Trying to used DTS from SQL Server 7 to import a table from Oracle 8 DB to SQL Server. SQL Server has Oracle 8 connectivity installed and a database instance setup. Connection using the instance works from Oracle Enterprise manager and all Oracle tools. The MS OLEDB provider for Oracle fails to connect : could not resolve service name. I have this working on a different server with the same setup (SQL Server 7 SP 2 + All Oracle 8.0.5 connectivity).
WHAT AM I MISSING?
View 1 Replies
View Related
Sep 18, 2007
Windows 2003(64bit) server, SQL 2005 Server(64bit), Oracle client 10G rel2 (64bit) is installed. But when I am going to create a datasource to the Oracle database the Oracle OLEDB Provider is missing, the only Providers avaliable is from Microsoft.
I have tried to install ODAC (64bit) with no result.
Anyone who have come across this problem and how do I do to resolve it?
BTW! Is there a way to try communication with the OLEDB provider from the commandprompt?
View 2 Replies
View Related
