I have a SSIS package which takes excel spreadsheets (exported from MS Project) and imports them into tables in my database. I have each step of my control flow set up with "On Success" so it only continues if the previous step was successful.
My next step is to create a asp.net page and/or web part so that I can have my user click a button to launch this SSIS and import this data. I have seen articles on how this could be done via code - so I assume it can be done. But what I cannot find is how alert the user if an error has occured in the execution of the SSIS.
How can you alert a user that a package you executed though vb.net in the front end errored?
Could I build something in to the OnError handler that returns the error and have that error returned to the front end App??
Any insight/examples for this would be much appreciated.
I downloaded SQL Server Express 5.0 and would like to know - must I open SQLServer through a studio like SQL Server Management Studio Express, or can it open on its own? Does it come with a GUI inside it?
I clicked Start/All Programs/Microsoft SQL Server 2005 and only submenues were displayed, not the server itself. The submenues were
Configuration Tools SQL Server Management Studio Express.
Hello everybody, please advice: what is the fastest standard method of user interface access to SQL database? I am looking for fast display of one master record plus related dependent records, plus fast scrolling through master records with display of dependent records as fast as posible. Perhaps a standard problem with standard solution? At current state of matters, I am still much slower then with my old Access97 database.
Using SQL Server Reporting Services, we're designing an executive reporting interface for a handful of high-level managers who need no more that a dozen reports.
What's the best user interface for them where they would choose the report they need?
- The SSRS Report Manager web page? - A SharePoint page (integrated with SSRS)? - A report menu within an existing application? - Anything else?
Hello,I would like to know if it is possible to create a form in Access2000,which would function like a calendar for 8 operating rooms inhospital, showing which hours are those closed for a specific date.For this intersection I would like to be appeared the name of thedoctor, the name of the patient and the kind of operation.Furthemore I would like this intersection to be marked in the calendarwith a colour, showing that this room is closed for that time.The data for this form are going to be extracted from a table storedin SQL Server 2000.Generally the whole application is stored in SQL Server( storedprocedures, tables, diagrams etc.)1)How this can be done? Is this going to be through VB or not? Can Imake a template in Excel spreadsheet put it in a formand apply code on it?I would like also to make forms(in Access) for user-entry data thatwill use stored procedures of SQL Server with pushing the OK button.The stored procedures would take as arguments the user-entry data fromtheforms.I thought to make a pass-through query which would use a VB functionand would take as arguments the user's valuesand after would pass these values in the stored procedures.2)Can this be done through the pass-through query, that is SqlServer "understands" VB or better Access pass-through query processthe VB commands before be connected with the Sql Server?What do you think of this as an idea?My problem is that I really don't know how to combine VB code withTransact Sql code.Can you give an example or any ideas where I can find the relativeinformation?Thanks you in advance.
Hello, does anyone hate the new interface where you manage the Table Relationships, Indexes, and etc?
I hate it a lot for these reasons. 1) Dialog window cannot be resized (really really annoying) 2) The Table-Relationship configuration dialog window is not as convenient to use as SQL Server 2000 Enterprise Manager.
I hope this is the correct place to provide feedback and I hope this will get modified a bit in the next service pack (or) update....
I am a bigginer. I need to save input from textBox (User interface that I have made using VWD) to a database in SQLSEE 2005 using C#. please help me. I now how to connect to DB using Visual Items like gride view and form view. but i want to conect to DB using my developed UI lke in below. any help greatly appreciated
I execute a pretty big sql query which joins multiple tables and I reviewed indexes on all these tables. I am happy with the result when I run the query using SSMS in the server locally i.e., where my SQL Server database is installed. It takes 4 seconds to get around 17000 records. If I run the same query in a network or from my desktop using SSMS i.e., i connect to the above mentioned SQL Server using SSMS, it takes more than 60 seconds. Not sure how to solve this. If someone could help me, it will be of great help.
I'm developing an custom dataflow transformation task that involves mapping of columns between multiple inputs and outputs. All the mappings are stored in a dataset. At first I thought to store this to an variable but after reloading bids I get an schema not found on xml for the stored dataset. Then I tried to put the dataset into an custom property but that seems to only take strings.
So how do I save the info on the mappings contained in my dataset (as that is most easy while using a datagrid to display mappings) in the package preferably in a way that is not visible to the user.
In short: What is the proper way to save complex datatypes in a custom dataflow task using a custom ui?
Can you use the below query to get CPU high utilisation alert purposes for both named and default instance? or, do I need to make any changes here (@wmi_namespace=N'.ROOTCIMV2' ) ?
USE [msdb] GO EXEC msdb.dbo.sp_add_alert @name=N'CPU_WM_Utilization_Check', @message_id=0, @severity=0,
If an error occurs in ScriptTaskA from PackageB, the OnError event handler in PackageA fires once and catches the event from ScriptTaskA; that is, the output of the SourceName system variable is "ScriptTaskA" from PackageB. So far so expected.
Now, the same error is handled differently by PackageA's OnTaskFailed handler. The OnTaskFailed handler fires twice - once for ScriptTaskA and once for ExecutePackageTaskA; that is, two outputs are returned - one for "ScriptTaskA" and the second one for "ExecutePackageTaskA". That's strange to me.
Why does the OnError handler only fire once and the OnTaskFailed twice? Is there a setting that does this?
We are generating log file in our SSIS package by enabling the built-in feature of SSIS tool. We are generating log for the "OnError" event. This also recorded the error/failed task messages in the text file "log.txt". That error information is too complex with more unwanted information like below
----------------OnError,,,pkgExtract,,,8/30/2006 11:50:04 AM,8/30/2006 11:50:04 AM,-1071636471,0x,An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
OnError,,,pkgExtract,,,8/30/2006 11:50:04 AM,8/30/2006 11:50:04 AM,-1071607780,0x,There was an error with input column "create_user_id" (116) on input "OLE DB Destination Input" (103). The column status returned was: "The value violated the integrity constraints for the column.".
OnError,,,pkgExtract,,,8/30/2006 11:50:04 AM,8/30/2006 11:50:04 AM,-1071607767,0x,The "input "OLE DB Destination Input" (103)" failed because error code 0xC020907D occurred, and the error row disposition on "input "OLE DB Destination Input" (103)" specifies failure on error. An error occurred on the specified object of the specified component. ---------------------------------
This is infact not in a better readable format. We also don't want to do our error logging in database.
Is there any way of defining our error log and create error error log with customization of our messages . Can we do it using OnError event handler.
Please help us with some good solution to avoid giving this confused error log messages.
I am having a few problems getting the opomum configuring the OnError event hendler for my new package. What im trying to do is log the Error event and sound out an email (which i am achiving) where i am encountering a problem is trying to determin the severity of the error.
What i would like to achive is to send an email and log the error (as i currently do) but if the error has the power to stop the package from executing i would like to fire an additional script to move the loading files to a failed location.
My initial thoughs were to put an expression the on the procdural constraint in he error handeler but i cant find which System variable to apply the logic to.
Please note that "Errordesc" is the variable which I declared on script as readandwrite variable.
But on execution of this script I get error
Error: A deadlock was detected while trying to lock variables "User::Errordesc" for read/write access. A lock cannot be acquired after 16 attempts. The locks timed out.
any sugestion...
Please note that without ErrorDesc, the script runs successfully
I have a package name "Package1" and I have a few data-flow tasks in it. whenever anything fails in the "Package1", I want to send out the failed email to alert myself. So first step, I went to EventHandler tab, and select Executable as "Package1" and Event Handler as "OnError". and then I added SendMailTask. I manually ran SendMailTask, failed email send to me okay. But when I run package from Microsoft visual Studio (IDE), the package failed but it doesn't send out failed email.
Error code: [174]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "xxx" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Maybe I misunderstand OnError eventhandler, or I set up it wrong.
I have a package which have two sequence container, first container is used to transfer data to a staging area and second sequence container is used to transfer to destination from that staging area. And I also apply transaction required to second sequence container. There are several execute sql tasks and several data flow tasks inside two sequence container. first sequence container( 1.execution sql task-> 2.data flow ->3.execution sql task) -> second sequence container(4.execution sql task-> 5.execution sql task-> 6.data flow-> 7.data flow -> 8.execution sql task-> 9.data flow...)
I create ExecutionLog table which is used to log status for this package on our sql server. First this status field is null, then during this package run , it change to 'in process', and after this package finished, it change to 'success' or 'failure' depending this package can run successfully or not. This package can be run only if status is 'success' ,'failure' or null. So I need to change this status field during package execution. For updating package to failure, I need to add event handler to change that status using execute sql task.
First time I perform to execute sql task on onError event handler tab (this event handler is applyed on package level ) . And for testing envent handler I use old schema version to make sure I get failure for '8 execution sql task'. But package seems to get stuck at '8 execution sql task' inside second sequence container( always yellow when I run from ssis) and never fire envent handler. '8 execution sql task' is used to update related table.
Second time I remove onError envent handler and change to use on onTaskFailed event handler tab (this event handler is applyed on package level ) . But everything is the same as using onError event handler except I got error output but still can not fire event. Why '8.execution sql task' can not fire onError or onTaskFailed? For this case what kind of event handler I need to use, what kind of level I need to apply for this event handler.
I have included the Send email task and sending email from SSIS package on Error event.
But for an error I am receiving multiple atleast 10-15 email generated. i got only 2 emails with revelant error message and other email gives message like "
Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown."
I have included ''@[System::ErrorDescription]' as an email attachment.
Is there any way to get only specific relevant error email.
I used onError event to send email in case ssis pckage fails
but it send multiple email with errordescription. for ex below are the errordescription of four diferent emails i received.
Thread "WorkThread0" has exited with error code 0xC0047039. An error occurred with the following error message: "The connection "{01AF859A-CF97-4F6C-9C78-1AA4B1C9C27B}" is not found. This error is thrown by Connections collection when the specific connection element is not found.". Thread "SourceThread0" has exited with error code 0xC0047038. The PrimeOutput method on component "Flat File Source - Read from source file" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Can anyone suggest if we can combine all this error description and send this as one email.
I have a package the looks for any Excel files in a folder, moves the data to a SQL table, then archives the file to one of two archive folders--a success folder or an error folder. I have an OnError handler on the Data Flow that sets a flag that lets the archive process know where to move the file.
This works when the processing is successful. It also works when the error in the Data Flow occurs right off the bat, i.e., in the Source. When the error occurs later on, say in the Destination, it doesn't work correctly. In this case, the OnError sets the flag, but when the archive process tries to move the Excel file, it can't because it's locked. I assume this is because OnError interrupted the Data Flow before the Excel file could be closed properly.
Any ideas on how I can avoid this problem? Can I manually get the Data Flow to close the Excel connection somehow?
I have a Script Task in an OnError EventHandler, the Script Task is used to send an Email to notify about the Execution Error. I'm currently using the System:ErrorDescription variable in my Script Task to provide details about the error but I have noticed that the Error Description written in the Windows Event Log when using OnError Logging is much more detailed than the content of the System:ErrorDescription variable. How can I use the same Error Description in my Script Task ?
I'm very new to using SSIS. I have a large number of SQL databases (archived .mdf/.ldf files) with data that needs to be imported into one giant database. My problem is that half of the databases are missing a column that was introduced in a newer version of the database schema and when my package executes my data flow task it errors out. I basically get a message stating that it cannot prepare any statements because the SQL command that I am using is trying to select column data from a column that doesn't exist.
I figured that I could set the OLEDB Source inside of my Data Flow to have a Data Access Mode = SQL command from variable. The variable bound to the component is called "MySelectQuery" and is initially set to my "new format" query. From there I could create an event handler for the OnError event of the Data Flow Task, switch value of "MySelectQuery" to equal the "old format" query and rerun the Data Flow Task.
I'm not sure how to accomplish restarting my Data Flow Task after changing "MySelectQuery" in the OnError event. I just tried setting up the package to use CheckPoints but it doesn't seem to be working right for me. When I restart the package it starts over even though there is a checkpoint file that seems to have captured the state after the failure.
Context: I have a web page that uplaods a file that is then imported to the database via an SSIS package.
Problem: If and when the package encounters an error, I want to surface that error to the user via the web page.
Approach: I derived my own class from the DefaultEvents class and then overrode the OnError event handler to catch any errors raised during package execution. I then pass my class to the package Execute method.
Results: The OnError is triggered, but I don't know how to abort package execution nor how to pass the error context to the user. I tried raising a custom exception in the OnError handler, but it failed to propogate to the calling code (ie the code that executes the package).
Another approach would be to write to a database table and then do a query from my web page after the package is done executing (alternatively, I could generate a log file). Seems like a lot of work though. All I want is to pass the error context back to my calling code so I can tell the user what happened.
I have an SSIS package that contains a For Each Loop Container. I have three Data Flow tasks within the container. I have an OnError event handler associated with the encapsulating container. When one of the Data Flow tasks within the For Each Loop Container fails, the OnError for the Loop Container gets called 5 times. The OnError handler is just a script task that sends a notification email. I am not explicitly Dts.taskresult = failure, nor am I calling FireError.
Is there a way I can stop a script task of a control flow from raising OnError Events? or Is there a way I can Set Dts.Results to Fail without having the script task raise OnError event.
I'm trying to implement a custom log table. To keep the discussion simple, let's say I only have 1 column in this table and all I want to write in it are
"Start" when the package starts "Error" when it encounters an error "Finish" when the package finishes. Even if there was an error, I still want to enter "Finish'.
My Control Flow has 3 task objects, 2 Execute SQL Tasks, and 1 Data Flow Task in between them.
The first Execute SQL Task does an insert statement for the Start and the second Execute SQL Task does an insert for the Finish.
To capture any package errors, I also have an Execute SQL Task (to insert "Error") in the Event Handler for OnError. I see that when I cause an error in my package it can raise multiple OnError events, which will envoke my Execute SQL Task multiple times. (This is good because it will allow me to write a line per error event with the error description.)
The problem I have is, how do I write the "Finish" log when I have an error? If I put the insert for the finish in the same Execute SQL Task with the errors, then it will write a "Finish" for every error. But I can't put it anywhere else because if I put it anywhere else, the package never makes it there because it stops at the OnError Event Handler.
Or is there a way for me to tell the package to do the 2nd Execute SQL Task all the time?
Lastly, is there a better way to do this kind of custom logging?
I've setup the option to mail the error to a person. When the option is on I get the error message by mail but the package does not finish (eg. the failing task does not become red and the output windows never says anything about the error) - if I set the option to off the task fails as expected.
I have a package on which i've applied a package level OnError event handler. The OnError event handler includes a Script Task (that builds up a string of errorCode, errorDescription, MachineName etc...) and a WebService Task that calls a webservice to send an email including the built up string from the script task in the body of the email. This has worked fine in one package where i've applied it but for some reason in a second package the existence of an OnError package level event handler seems to be completed ignored. I'm causing various package object to fail but the OnError handler never fires. I know the obvious answer is find what's different between the two packages but i can't see that any is different (in relation to package level OnError event handling).
Has anyone else come across this? Any suggestions?
