One Node Could Not Up In Server Failover Cluster
Jul 23, 2015
We have 2 nodes window Server 2012 R2 and SQL Server 2012 Enterprise Version cluster setup. We can switch roles and Node to one node to another and revert back to previous node with out any issues. But we are facing when one Node is restarted. We could not restart that Node in cluster Service start in Failover cluster Manager. Error Details is displayed as below inside double code."Cluster node NODE1 could not to join the cluster because it failed to communicate over the network with any other node in the cluster. Verify the network connectivity and configuration of any network firewalls."
I checked windows firewall. windows firewall is all of in Node1, Node2, SAN and DC.I have disabled and enabled the Internal and private network of Node 1. I have validated the cluster. it is showing no error though.
Node1:
Public IP: 10.10.0.11
SubNet Mask:255.255.255.0
Default Getway: 10.10.0.1
Prefered DNS: 10.10.0.10 (Ip of DNS)
[code]....
Private Network: Not configured.pinging to each other ip is successful from one node to another.
View 9 Replies
ADVERTISEMENT
Jun 24, 2015
I have destroyed the cluster in failover cluster manager and then i am trying to remove node from the sql server installation centre.I am facing the cluster node and cluster service verification errors.I am not able to start the cluster service in services as well.
View 4 Replies
View Related
Jan 3, 2010
I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
View 30 Replies
View Related
Oct 19, 2010
Server : Windows server 2008
DB Server : SQL Server 2008 (SP1)
Here are the series of events which happened.
1.) Event ID: 1135
Cluster node 'XYZ' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
2.) Event ID: 1049
Cluster IP address resource 'SQL IP Address 1 (XYZ)' cannot be brought online because a duplicate IP address '10.9.8.113' was detected on the network. Please ensure all IP addresses are unique.
3.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
4.) Event ID: 1049
Cluster IP address resource 'Cluster IP Address' cannot be brought online because a duplicate IP address '10.9.8.112' was detected on the network. Please ensure all IP addresses are unique.
5.) Event ID: 1069
Cluster resource 'Cluster IP Address' in clustered service or application 'Cluster Group' failed.
6.) Event ID: 1066
Cluster disk resource 'Cluster Disk 25' indicates corruption for volume '?Volume{88552e6f-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 25_Disk16Part1.log'. Chkdsk may also write information to the Application Event Log.
7.) Event ID : 1066
Cluster disk resource 'Cluster Disk 26' indicates corruption for volume '?Volume{88552e05-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk
output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 26_Disk4Part1.log'. Chkdsk may also write information to the Application Event Log.
8.) Event ID: 1049
(Same message as point 2)
9.) Event ID: 1069
(Same message as point 3)
10.) Event ID : 1049
(same message as point 4)
11.) Event ID :1069
(same message as point 5)
12.) Event ID :1205
The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
13.) Event ID: 1069
Cluster resource 'Cluster Disk 17' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
14.) Event D : 1049
(same message as point 2)
15.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
16.) Event ID : 1205
The Cluster service failed to bring clustered service or application 'SQL Server (MSSQLSERVER)' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
first of all,I went through all the logs, and could not find the reason for fail-over initialization. There should be some thing logged why the failover happened? secondly after failover the service was not coming online due to duplicate IP address detection.
Later when we try to manually bring the service online from cluster management it comes online successfully. I don't understand how would duplicate IP address get resolved when we start manually.
Lastly we see few errors related to physical disk resource between failover retries, is this could be the correlated to failover error ?
View 4 Replies
View Related
Jun 12, 2007
I read these instructions:
http://msdn2.microsoft.com/en-us/library/ms191545(SQL.90).aspx
But I'm not sure if I have to install SQL Server first on node 2, then add it to the cluster. Or does adding it to the cluster also install the software?
Thanks
View 1 Replies
View Related
Oct 29, 2015
1. Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. after fail over done to 2nd secondary node what mode in production(readonly or read write).
4. how to rollback to production primary ,will change data in secondary will get updated in primary.
View 5 Replies
View Related
Feb 18, 2014
I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies
View Related
Oct 23, 2014
I'm contemplating running two availability groups on a two node WSFC. The WSFC is setup with a file share witness (i.e. no shared storage). Can I safely run 1 AG on one primary node, and the other AG on the other node (as primary). Each AG would have replicas on the passive node. This would effectively allow both servers to be in use at the same time. In a failover event, I understand that both workloads would transfer to a single server - so the box needs to be sized appropriately.
View 1 Replies
View Related
Jun 11, 2015
We are in the process of building a 3 node SQL Server Cluster (Server 2012/ SQL Server 2012), and we have configured the quorum so that all 3 nodes have a vote (no file share witness as we already have an odd number of nodes).
As I understand it, this should allow the cluster to run as long as 2 of the nodes remain online.
However, the validation report states that 2 node failures would be acceptable and, when we tested this by powering off two of the nodes, the cluster did indeed continue to run on a single node.
View 4 Replies
View Related
Mar 27, 2015
y'day we faced situation one of the primary server went down and unable to failover the services to second node . by checking in logs we found
Cluster network 'Public' is partitioned. Some attached failover cluster nodes cannot communicate with each other over the network. The failover cluster was not able to determine the location of the failure. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
View 7 Replies
View Related
Sep 29, 2015
if for any reason AG fails over to async node, how replication behaves? As data will not be in sync with previous primary replica, how replication will work? I think that we have to reset replication from scratch as there's a high chance subscribers might be more updated than current primary replica as failover to this node causes data loss. How to keep replication in sync without resetting up? Can we achieve this?
View 5 Replies
View Related
Oct 29, 2015
1. In alwaysON fail over cluster, Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. After fail over done to 2nd secondary node what mode in production(readonly or read write).
4. How to rollback to production primary ,will change data in secondary will get updated in primary.
View 3 Replies
View Related
Aug 21, 2007
I configure Windows 2003 R2 and SQL 2005 two nodes Cluster. When I move cluster resource from one node to anther node it takes around 30 seconds to become online. So in that time if any query is running it stops responding.
So please suggest in this regard
View 2 Replies
View Related
Aug 25, 2015
I am running SQL 2014 2-node AlwaysON Availability groups, Enterprise Edition in our environment and 5 databases are part of AG.
Question is, sometimes AG is getting failed over to node2 but always our preferred node is node1 due to some business needs otherwise some of our jobs will fail.
So, what I looking for is, a sql script which can handle a situation wherein, for some reason, AG is failed over to node2, it should be able to detect if node1 is back online or not and if so, it should fail back to node1. How to do this using tsql query or stored proc or sql agent job ?
View 4 Replies
View Related
Jan 31, 2008
We have been working on a project to upgrade the servers in our 2-node SQL Server environment. I evicted a node after removing it from the instance. We added the new node under a new server name. I then start the Add remove programs, choose to change the SQL 2005 environment, type the virtual server name. Choose to maintain virtual server, pick to add new node. All seems well, I enter all prompted questions, and when the install begins I get the error below.
Product: Microsoft SQL Server 2005 -- Error 1706. An installation package for the product Microsoft SQL Server 2005 cannot be found. Try the installation again using a valid copy of the installation package 'SqlRun_SQL.msi'.
So I copied the SS2K5 Enteerprise Edition software to the local C: drive, point it too the 'SqlRun_SQL.msi' in the setup folder and still get the error.
Any one experience this or have any suggestions?
View 3 Replies
View Related
Oct 10, 2015
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
View 3 Replies
View Related
Oct 3, 2015
Can I add a new node to an existing sql server 2012 cluster witthout stopping all the current resources?
Currently, there are 2 nodes and 3 sql server instances, which can not be shutdown. Is the process of adding nodes a "online" process?
View 1 Replies
View Related
Oct 8, 2015
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
View 2 Replies
View Related
Jun 24, 2008
Friends -
Currently we are using SQL Server 2000 Cluster (Active/Active) on windows 2000 advance server.
This cluster contains two nodes.
Is it possible to add another two nodes on the existing cluster, please provide me steps or any link.
Appreciate your support
Cheers:)
satish
View 1 Replies
View Related
Jan 16, 2008
I invoke xp_cmdshell proc from inside a stored procedure on a 2-node active/passive SQL 2005 SP2 Standard cluster. Depending on which server the xp_cmdshell gets executed on I need to pass different arguments in the shell command. I thought I could use host_name() function to get the runtime process server, however, I am finding that it's not behaving correctly. In one example I know my active node is server2, but the host_name() function is returning server1. The only thing that I could possible explain this is that the MSDTC cluster group is not always on the same active node as the SQL server group and in the case I am talking about the cluster groups are in this mode (differnet nodes). Does the xp_cmdshell get executed by the SQL active node or the MDTC active node? And what is the best way to find out which server is going to run my xp_cmdshell?
Thanks.
Edit:
Perhaps another by product of this is that if I run select host_name() from the Studio Management query window i get different results depending on which server I am running the Studio Management on. On server1 I get server1 and on server 2 I get server 2, all the while server2 is the active node. I need a different function that will always let me determine the correct server that'll be running the xp_cmdshell...
Edit 2: I guess I could determine the running host inside the command shell itself, but I am curious to see if i can do it (cleaner) from SQL.
View 1 Replies
View Related
Dec 12, 2006
We have sql server 2005 installed locally on 2 servers and want to set up failover clustering. Do we need to uninstall what we have then install as failover cluster? Thanks.
View 3 Replies
View Related
May 23, 2006
My question is, I'd like my actual cluster to have 4 servers. The virtual server that will be running SQL 2005 will only be installed on 2 of those nodes. Will this work or do I have to split my cluster in to 2 to meet the SQL Server 2005 2 node failover limitation? A basic config for the cluster would be like below....
ClusterSQLNode
Active SQL 2005 Server
ClusterExchNode
Active Exchange Server
ClusterAppNode
Active Application Server
ClusterFailoverNode
Failover SQL 2005
Failover Exchange
Failover Application
Will SQL 2005 install in a 4 server cluster if I only install it on to two of the nodes? Any potential gotchas?
View 1 Replies
View Related
Nov 23, 2015
I ran into problem while trying to install SQL Server 2008 to join to another node in a failover cluster ,you will find here the configuration doc and installation details. URL...
View 4 Replies
View Related
Sep 13, 2006
I have a production failover cluster running SQL Server 2000 at SP3that I want to upgrade to SP4. I do not have a test failover clusterto test with so I need the install on the primary server to work thefirst time. Per the information I have I just install the patch on theprimary server and it will install both on the primary and on thesecondary.However, I remember when I did the initial install and it failed. Thefirst problem traced to the fact that the install uses temporary filesunder the profile of the installing administrator and the id had neverlogged into the second server so the install failed on creating thetemporary file. The was a second problem that related to an OS featurethat had to be off for the install to work.If anyone out there has done this upgrade and remembers encountering aproblem and its fix/workaround I would appreciate a head up warning.Thank you-- Mark D Powell --
View 1 Replies
View Related
Apr 16, 2008
Hi all,
I need some help to known more about basics of SQL Server 2005 failover cluster . pls provide me link to
known the concept.
Thanks,
Nav
View 6 Replies
View Related
Jun 6, 2014
When adding a node to a SQL Server 2012 Standard edition cluster, how I do I identify the location for SQL server shared components and the rest of the SQL Server installation binaries?
When adding a node to a SQL Server 2012 Standard edition cluster all the binaries went to the C: drive default location. We put those files on a different drive when installing the first node. What needs to be done so both nodes have the binaries on the same drives and folders?
View 3 Replies
View Related
Sep 29, 2015
On first Node A: The server has 16 GB of physical RAM.
On second Node B: The server has 10 GB of physical RAM.
Now, this being Active Active, Node A can be clustered on failure onto Node B..Now reporting server is configured under these two nodes, with defined MAX and MIN server memory of 12 as MAX and 0 is min IN GB.Now with this setting on SQL whenever the cluster moves, such config make OS goes low on node for 10 GB.I am only left with option of switching this MAX and MIN to a default setting or is there any other alternative such as script which can change this setting accordingly when cluster moves to respective server.
View 7 Replies
View Related
Feb 8, 2008
I've never performed this type of installation. Any tips/ tricks you could provide would be greatly appreciated.
View 10 Replies
View Related
Jul 21, 2015
I have installed 2 node windows Fail-over clusters successfully. But QUARUM Configuration is not appearing in Failover cluster manager instead "Witness: Disk (Disk Cluster 4)". I have also configured quarum configuration from Quarum "Configure Cluster QUARUM Settings". I have attached the snapshots of windows cluster configuration. Is it the issue or not. I have not got any warning and error during cluster validation while installing Windows failover cluster. I am assuming it is okay and i can move ahead to installation of SQL Failover cluster setup.
Products used for installation in Virtual Machine:
Windows Server 2012 R2
SQL Server 2012 R2
Note: Service Pack is not installed.
View 2 Replies
View Related
Jun 11, 2008
Hai -
Currently i am do sql server 2005 failover cluster installation on win 2003 server.
It is showing preparing to install please wait and there is no progress from last two hours.
Is there any way to check whether installation is going on or where can i check log files for this installation.
Please advise asap.
Cheers:)
vsh
View 7 Replies
View Related
Nov 20, 2006
Hi,
We have configured two SQL Server 2005 in a cluster (without Witness).
We have severals ASP (using ADO) that are connecting to SQL Server 2005 with SQL Native Client in a DSNLess connection String :
driver={SQL Native Client}; server=MAINMAIN; Failover Partner=BCKUPBCKUP; uid=log;pwd=pwd;database=MyBase
When using this connection string, the connection to MAIN is alrigth, but when we simulate a unavailability situation on "MyBase" or on the entire MAIN instance, the new connection are joining the MAIN and not the BCKUP SQL Server.
We tryed several Connection Strings including Failover_Partner, Initliag Catalog instead of database... but no one succed in joining the BCKUP SQL Server.
I precise that the DNS on the PC that connect to SQL server is configured and both MAIN and BCKUP are resolved in command line or in explorer.
Is there an other driver that must be used, or is there an other parameter to set in the connection string ?
Regards.
View 1 Replies
View Related
Nov 20, 2006
Hi,
We have configured two SQL Server 2005 in a cluster (without Witness).
We have severals ASP (using ADO) that are connecting to SQL Server 2005 with SQL Native Client in a DSNLess connection String :
driver={SQL Native Client}; server=MAINMAIN; Failover Partner=BCKUPBCKUP; uid=log;pwd=pwd;database=MyBase
When using this connection string, the connection to MAIN is alrigth, but when we simulate a unavailability situation on "MyBase" or on the entire MAIN instance, the new connection are joining the MAIN and not the BCKUP SQL Server.
We tryed several Connection Strings including Failover_Partner, Initliag Catalog instead of database... but no one succed in joining the BCKUP SQL Server.
I precise that the DNS on the PC that connect to SQL server is configured and both MAIN and BCKUP are resolved in command line or in explorer.
Is there an other driver that must be used, or is there an other parameter to set in the connection string ?
Regards.
View 1 Replies
View Related
Jan 17, 2008
Hello All, I am trying the following script to upgrade SQL Server 2005 SP1 to SP2. I have an Active Passive cluster configuration. I have default instances of SQL Server. I am using the following script.
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /allinstances /quiet.
The sql server install fails to run. When I used the above command with just
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /quiet still the summary.txt file came with authentication success and that is all. I changed the above script and did
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /instancename=instancename of the cluster
This worked, however the install patched the passive node (DB engine, all the cluster unaware components) but failed to patch the DB engine on the Active node. I had to run the SQL Server sp2 install manually but still it did not patch the DB engine on the primary node
1. Can someone please help me with this issue as I want the unattended install to work. so it installs both active and passive node. I will post the final output and also the ADS script to do this as a bonus if this works.
Here is the summary.txt file.
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
msftesql Database Services Service 5152
MSSQLSERVER Database Services Service 4412
ResrcMon.exe Database Services Application SHOMSCSService 4688
**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2153
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29506
Error Description : MSP Error: 29506 SQL Server Setup failed to modify security permissions on file D:Microsoft SQL ServerMSSQL.1MSSQLData for user sqlservice. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that exists on the destination drive.
----------------------------------------------------------------------------------
Product : Integration Services
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : MSXML 6.0 Parser
Product Version (Previous): 1129
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQLXML4
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 2004
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Microsoft SQL Server VSS Writer
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29506
View 1 Replies
View Related
