Hi All,
I have MS Access 97 database and SQL Server 2005 Express Edition (or SQL Server 2005 Developer Edition).
I want online get data from MS Access and upload to SQL Server.
Help me, which way I select ?
Regards
Hi, I'm using Sql 2000 and I have a linked server called SRVSRV.
The link works because I can list all tables.
How can I access the data i'm trying:
SELECT * FROM [SRVSRV].Database.Table
And it don't works.
What am i doing bad?
Thanks.
We have SQL cluster installed on top of windows cluster on VM environment. Node1 and Node2 under Windows Failover Cluster. SQL instance is currently on node2 the instance is up and running, but SQL Cluster service remains online pending and it restarts the instance on every 5 minutes.
SQL Browser service are running successfully.TCP/IP ports are enabled and configured.If we start the SQL server agent it is on for seconds and stopped immediately  .Cluster Service is attempt to connect to the SQL service every few minutes (setting in SQL cluster resource) for the IsAlive check, if this fails then the SQL resource is restarted even if the instance was online. Hope this is what happening exactly.
[sqsrvres] ODBC Error: [08001] [Microsoft][SQL Server Native Client 11.0]SQL Server Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. (268435455)
00001024.00053314::2015/10/30-19:57:50.772 ERRÂ Â [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] ODBC Error: [HYT00] [Microsoft][SQL Server Native Client 11.0]Login timeout expired (0)
00001024.00053314::2015/10/30-19:57:50.772 ERRÂ Â [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] ODBC Error: [08001] [Microsoft][SQL Server
Native Client 11.0]A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books
Online. (268435455)
00001024.00053314::2015/10/30-19:57:50.772 INFOÂ [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] Could not connect to SQL Server (rc -1
When you load the data into a new partition table, can it to done online without any downtime? because I have few tables that are around 250 gigs and more.
View 5 Replies View RelatedDoes anyone have any great suggestions on how I can import an online XML file into an SQL 2005 table?
So far I tried to accomplish it with SSIS Data Flow Task where my source is XML Source (Data access mode: XML file location; XML location: URL, Use inline schema = True). This set up properly identified the columns to be imported.
I used Copy Column data flow transformation task to load data to OLE DB destination table that has same structure.
When I run the task it does execute with no errors, however the table remains empty. It looks like I am failing to read the actual data.
Do you have any suggestions? I am willing to go around this approach with stored procs/com/you name it €“ just make it work!
Thanks a lot for your help!
LoveDanger
Hi!!
I need some help to importing Acces file to SQL 2005.
Thank's
Hi,
I m totally new in SSIS Programming.
I want to transfer ABC.mdb table to my oit_imp_temp table.
Can you send me refrence with (above requiments) code that wroks for u !
thanks a lot !
Hi,
I m totally new in SSIS Programming.
I want to transfer ABC.mdb table to my oit_imp_temp table.
Can you send me refrence with (above requiments) code that wroks for u !
thanks a lot !
I've got a website with authentication mode "forms". Now I need access to the database to authenticate the user. The SQL Server is located in another domain than IIS.I don't know how to establish a trusted connection with the SQL Server. How can I establish this?
View 2 Replies View RelatedHi
I would like to acces a SQL Server that is on a web server.
I want to to this to be able to control the sql server and database to create table, trigger...
For "MySql" i use DBTools to acces my database via the web, is there something i can use like BdTools to acces the Sql Server 2000 database
I'm new to SQL so can somebody can tell me what to do!
Thanks
I try to access an OLAP Server from a remote compute, using ADO MD Library with following string conection :
"Datasource=SERVNAME; Provider=msolap; Initial Catalog=FoodMart 2000;"
I recive the following error code: -2147467259 (0x80004005), "Unspecified error"
Can sombody help me
Hi there.
How can i convert a Ms Access Database file (.mdb) to an SQL Server 2005 Database ????
is there any tools ?? or what ever can help me .
Thank you.
After an internet search I have some questions regarding SQL Server access from a mobile device via LAN / WLAN.
I will write a application in C that write data to an SQL server. First if I correct that's not possible to acces an SQL server via ODBC on Windows CE? What alternatives are there?
Stef
I am new to SQL Server but have been using Access to provide Multi-User acces to a central data store. We are evaluating the replacement of Access with SQL Server. With Access we don't need any special installation; I believe that the Jet Database Engine installed locally on each user's PC allows them to work with this in a disconnected manner; we use ADO.net 2.0 with VB.net 2005.
If each user has a locally installed SQL Server Express can they all attach to a database that resides on a shared network location?
In another post on the Forum I see the following regarding multi-user access:
Our application You will need to pick a central computer that everyone will be using the access the data and attach the file to the parent instance of SQL Express on that comuter, giving it a name that you can use to access it. Then you will need to modify your connection string to connect to the named database on the central server...
Can multiple locally installed SQL Server Express instances attach to a single data store that resides on a shared network location?
If not, what permissions do I need to create a parent instance of SQL Server Express?
Thank you for helping me understand how to implement our solution.
JudiR
What is the fastet connection between access 2003 to sql server 2005?
View 2 Replies View RelatedI am developing an asp.net app using visual web developer. I am using a sql server 2005 db for the back end. I have learned that I have to restart my machine if I want to work with the db in SQL Server 2005 Express after working with it in Visual Web Developer.
I am wondering why this is. I am assuming that the db is locked when it is used with VWD. Is this correct? Am I refering to it's status of "locked" correctly? Should I call this something else?
-thanks to anyone that can help
My question is this:
Is there anyway to backup the current online log after complete loss of the current correponding datafile?
Example:
(2) Logical Disk Volumes
Disk 1 (D:) contains pubs_data.mdf
Disk 2 (E:) contains pubs_log.ldf
Disk 1 becomes corrupt and goes offline leaving the the database pubs in a suspect state. Is backup of the current online log pubs_log.ldf possible? If a backup of the log is not possible are there any other restoration methods that can be used to bring this database back online, rescuing as much information as possible from the current online log pubs_log.ldf.
Thanks,
P
I have an online SQL Server database provided by an ISP. I do not havepermission to create a backup device and I understand this is normalpractice.I am not using Enterprise Manager to administer the online database.I know I can back up the structure of the database using SQLscripts.My question is:How do I back up on my own machine the data contained in the onlinedatabase tables I have created? If I were using Enterprise Manager Icould do it by downloading tables using the DTS facility but how can Ido it without Enterprise Manager?Is there some work around which I have missed eg creating a csv fileof the data?Best wishes for 2005 to all those helpful people in this newsgroup!John Morgan
View 1 Replies View RelatedHi,I wonder if anyone can help with the following on a fee paying basisfor the the design or development of some type of script or utility orpiece of code to do the following work.I wish to retrieve some data from an online database that is in thepublic domain. The online database has a search facility that matchesthe entry (name) in a search box then returns a screen stating that amatch has been found or not found.If a match is found there is a button to click that proceeds to thescreen containing the data which is simply two names. It is these twonames that I wish to retrieve and store them in something like a textfile where they are associated with the original entry (name) used inthe search box.I have a list of the entries for the search box that can be suppliedin sample format for testing as a columnar text file or commadelimited file or a spreadsheet.. I would need the procedure toprocess the list of search entries, retrieve the data then move on tothe next one in the list. Obviously, if a match was not found then theprocess would need to move on the the next entry in the list withperhaps a message saying "No Match" until the entire list wasprocessed.The PC I hope to run the process on is a Windows XP machine and if Ineed to purchase any particular software that is necessary for the jobthen I am quite willing to do so. Also, as I pointed out above I wouldpay for the work to be done.I hope that I have explained the above OK and that I have posted it tothe correct newsgroup(s). If it is not in the correct newsgroup Iwould be grateful if anyone could point me in the right direction.RegardsDave Gibson
View 1 Replies View RelatedHi, here is my problem
I am trying to conncet to an SQL Server that is on the net. The name of the server looks like : sqlServer.TheCompanyOwingIt.Com and it listens to port 2433
I am opening enterprise manager and trying to connect ,giving the name of the server and the credentials but no luck. I also tried opening hte client Network utility , created an alias for that server, specifying 2433 as the port but no luck again. Finally i tried to change the port of my sql server to be 2433 (instead of 1433), no luck again !!! Any ideas ? (there is no firewall running on the PC, but there is a router which might (?) cause the problem ? (i tried to port forward 2433 , but i am not sure if i did it correctly).
Any ideas, suggestions will be greatly appreciated
Thx in advance
Theodore
Hi All, first post.
I have done a bit of searching around and cant find a clear answer to this question.
Current Setup
Desktop application (c#) that connects to a SQL Server 2005 express database on the same local network as the application (currently 3 users)
It is only a very small company and has just taken on their first remote worker, but expects to take on another 6-8 over the next few months. They have asked for the database to be moved online.
The application was written in such a way that everything has been done using no stored procs, or views, it is all native SQL.
This will be my first DB hosted online and before I go ahead and do anything I just wanted to make sure what I have to do is correct, sorry if this is a very basic question, although I have been programming for a long time, I have never had the chance to do any online databases before.
Will this work.
1.Find a SQL Server 2005 Hosting company.
2.Move the database to the server.
3.Setup the users permissions.
3.Alter the connection string in the application to point to the new location.
So the only thing that would change would be a new connection string in the application preferences?
Or am I living in a dream world, because nothing is ever that simple.
One thing I am worried about is the security/visiblity of the database and data as it travels from the server to the client and back.
Thanks for any advise you can give.
Mark
HiI am trying to connect an application to a remote sql server database, however it does not appear to eb configured for remote connections. Does anyone know a connection string of a database I can connect to , soem sort of learnsers database sort of idea ?Thank you.
View 1 Replies View RelatedHello,I am trying to develop a database solution for an organisation inIndonesia.This organization has a number of offices and users throughout thecountry. They all need to maintain their own data, but I also need tocreate a central database, to store all of the data, and share databetween the individual users. The problem is that the internetconnections are not reliable, so a online solution isn't possible. Iam planning to implement stand alone databases in Access, which "sync"with the central server. This sync could happen automatically (maybedaily), or could be initiated by the user. This Sync would/could takeplace when the internet connection is working.I am very familiar with Access, but I suspect that I will need to useSQL Server for the central database. I have not used SQL Serverbefore, and have a few questions:Is it possible to host a SQL Server, so that it is "Online"? What do Ineed to do for this? Does this need to be hosted by an ISP, or couldit been hosted on a computer in our office? What are the securityconsiderations?Is it then possible to connect to this SQL Server from the Accessdatabases in the various locations to "Sync" the data? If I could runSQL statements from the stand alone databases which could access theonline SQL Server I could write the code for the Sync procedure. Thebit that I am unsure of is how to connect to the SQL Server?Could anyone point me in the right direction? Examples? References?What sort of technology to use?I know VB and how to write SQL statements, it's just the connectivitythat I am unsure of.Thanks in advance.CheersMichael
View 1 Replies View Relatedare a mess, reminiscent of the structurless "goto" programming of days past. One of you brainiacs need to erect a "real" getting started section, with procedural steps on how a first time user can successfully download, install, and use SQL Server Express. Not all of us are working in corporations where the guy in the next cubicle can answer questions for newbies.
I will try once again, nicely, to ask a question about installing SQL Server Express Edition SP2 onto a Windows Vista machine. That drama will take place in another post.
Hi there, i would please like to know how to get a database online in T-SQL, I managed to get it offline in T-SQL, but know I can't get the database back online.
Please help.
If someone can please help me with the T-SQL command.
Or direct me to a link where I can get more information.
Thanks
my colleague is using visual studio (VB) and making windows applications. we used same connection string but i can't connect to the sql server.
i am using visual studio(2003) .net(C#) and making web applications. this is the code.
System.Data.SqlClient.SqlConnection conn = new System.Data.SqlClient.SqlConnection ();
// TODO: Modify the connection string and include any
// additional required properties for your database.
//conn.ConnectionString = "integrated security=SSPI;data source=cerebrum;persist security info=False;initial catalog=dals";
conn.ConnectionString="Server=cerebrum;Initial Catalog=dals;User Id=sa;";
try
{
conn.Open();
// Insert code to process data.
Label1.Text="Connection successful";
}
catch (Exception ex)
{
throw ex;
}
finally
{
conn.Close();
}
and i'm getting this error
SQL Server does not exist or access denied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.
Source Error:
Line 91: throw ex;
Line 92: }
Line 93: finally
Hello,I am working with VS2005pro and sql server 2005 (tables, SP). Nothing online yet but it should be soon for tests, and it will be for me the first time with sql server...I have a very basic question about the way we can keep on adding tables, stored procedures... when the application is already online.I'll try to explain: once online my users will enter data in the database (good point!). But on my side I have to keep on developing new features (new tables, new stored procedures...) and why not add new rows in tables, and I would like to add them to this database on the server once I have finished my development.So what's the best way to work ? Do I need to work online directly on my .mdf database (which I wouldn't like to do) ? Or do I keep on developing on my own computer, on a development database, and then is there a way to update/synchronize with the database on the server in order to add the newly created tables and SP ?Thank for you help.
View 1 Replies View RelatedCould some body suggest some good books and online resources for:
1. T-SQL Intermediate level/Advanced
2. SQL Server 2005
Thanks a bunch
Csharplearner
i am new to sql. plz let me know from where can i get free book to study sql server 2000.
View 3 Replies View RelatedHi,I was wondering if someone could help advise me.Basically i have a client who wants to upgrade from a desktop msaccess solution to a web based system using MS SQL Server 2005.Basically their main concern is in losing the ability to write ad-hocqueries using the MS Access query manager. I can obviously writestatic reports etc but whats the best way to give them someflexibility ??Can anyone advise me if there is any product that can do this for SQLServer 2005 (which im sure there is) but will work in a webenvironment.Or does anyone have any helpful ideas ???all help / advice greatly appreciatedCG
View 1 Replies View RelatedI am trying to install sql server 2005 books online but I am failing and I am getting this message
"This installation pakage could not be opened.Contact the application vendor to verify that this is a valid windows installer package"
am I doing anything wrong or has the version of books online changed? Do I have to install anything else before installing it? or does my operating system not support it?
Thanks
I downloaded and tried to install the file "SqlServer2K5_BOL_May2007.msi" and got a message:
"This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package."
Please advise.
Can some one give me detail instruction to installing the SQL Server 2005 Express Books Online.
I am new to SQL Server and want to install the MS training material.