Only One Expression Can Be In SELECT
Feb 2, 2014
The full error is this: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
My Code:
SELECT Customers.CustomerID, Customers.EmailAddress, Customers.LastName, Customers.FirstName,
(SELECT Addresses.Line1, Addresses.Line2, Addresses.City, Addresses.State, Addresses.ZipCode FROM Addresses JOIN Customers
ON Addresses.CustomerID = Customers.CustomerID WHERE Addresses.AddressID = Customers.BillingAddressID),
(SELECT Addresses.Line1, Addresses.Line2, Addresses.City, Addresses.State, Addresses.ZipCode FROM Addresses JOIN Customers
ON Addresses.CustomerID = Customers.CustomerID WHERE Addresses.AddressID = Customers.ShippingAddressID)
FROM Customers JOIN Addresses
ON Customers.CustomerID = Addresses.CustomerID;
I am trying to test a query I am going to use to create a view with all of a customers addresses (billing and shipping).
View 5 Replies
ADVERTISEMENT
Apr 24, 2006
Hi,I'm not a big friend of MSSQL, but I have to do one query I've done formySQL.But I don't know how...I have to select 'user' from 'db' where first letter is E or N, second is Bor 0 and after that there are 6 or 7 digits I know.How can I do that?In mySQL it would be something like:SELECT * FROM `table` WHERE `account` regexp '^[EN][B0]123456$' ORDER BY`Id`;Thanks in advance,Martin
View 10 Replies
View Related
May 11, 2007
Hi,
I'm executing the following Query :
SELECT FC3.Quarter, FC3.Service, FC3.TOTALIS, FC2.Quarter AS Expr1, FC2.Service AS Expr2, FC2.FCtIS,
cast((FC2.FCtIS / FC3.TOTALIS) as decimal(4,2)) as Value, getdate() as DateUpdate
--INTO FC4
FROM FC3 LEFT OUTER JOIN
FC2 ON FC3.Quarter = FC2.Quarter AND FC3.Service = FC2.Service
result:
Quarter Service TotalIS Quarter Service FCtIS Value DateUpdate
2007Qt1 Executive contracts 210 2007Qt1 Executive contracts 166 0.00 2007-05-11 15:23:08.100
My problem is that ' can�t get a decimal Value on the VALUE column ....
If i don't use the cast function i get a 0 , forcing a decimal value with cast i get 0.00 ..
This column is intended to retrieve a percentage , like 0,5(50%) ; 0,45 (45%), what is happening ?
View 4 Replies
View Related
Apr 24, 2007
I have a rectangle region in a report that contains a graph and a table. I want to display that list region only when the user selects a "Select All" from a multi-select report parameter. This rectangle region is used only to display summary data for All Agencies.
My report also contains a list region with graphs and tables, where I display data for each agency (my detail group), and page-break on each agency.
The problem I am experiencing occurs when using the Expression Builder for the Visibility property for my rectangle and list regions. Since a multi-select parameter is an array, I am forced to select an element in my paramater such as =Parameters!Agency.Value(0). When the user chooses "(Select All)", the first element is the first agency in the list. I don't want that.
How can I get Reporting Services to display a rectangle or list region when "Select All" is chosen, and to hide that rectangle or list region when one or more agencies are chosen from a multi-select parameter?
I have tried using Agency.Label and I've tried other expressions such as Parameters!Agency.Count = Count(Agency.Value), etc, without success.
View 4 Replies
View Related
Aug 12, 2012
An error is entered into the table, across two tables - tblErrors_ER and tblPolicyNumbers_ER - each error generates a PK (ErrorID) and can have any number of policy numbers which will be referenced by its own PK but linked to each error by its FK (ErrorID).I want to display each error in a Gridview in ASP.Net - columns included will be ErrorID, ErrorType, DateLogged from tblErrors_ER and PolicyNumber from tblPolicyNumbers_ER.If an Error has more than one policy number I only want to show the error once in the GridView with the word MULTIPLE under policy number.
tblErrors_ER
---------------
CREATE TABLE tblErrors_ER
{
ErrorID int,
ErrorType varchar(255),
DateLogged datetime,
[code]...
I have changed the Count(*) to Count(tblPolicyNumbers_ER.POlicyNUmber) which gives me the same undesired result as above. I have also left it as Count(*) and the entire CASE expression within the GROUP BY statement as suggest above which generated an error saying I can not use an expression in a group by clause.
If I leave Count(*) = 1 where it is in the original SELECT statement but swap the = for > then something happens, close to what I require but not as intended. It returns:
ErrorID ErrorType DateLogged PolicyNumber
---------------------------------------------------------------
1 Test 08/08/2012 Multiple
2 Test 08/08/2012 Multiple
this would suggest the original syntax is close to being accurate but I can not get it to work.
View 2 Replies
View Related
Nov 7, 2007
Hi,
When i try to save my stored procedure.. i am getting the above error and this is my sproc
1 INSERT INTO Statement..ClientSources
2 (
3 ClientId,
4 ClientSourceId,
5 SourceName
6 )
7 Select Distinct
8 @ClientId,
9 SOURCE_NUM,
10 (Select CASE s.SOURCE_NUMWhen 1 Then SRC1NAME
11 WHEN 2 Then SRC2NAME
12 WHEN 3 THEN SRC3NAME
13 WHEN 4 THEN SRC4NAME
14 WHEN 5 THEN SRC5NAME
15 WHEN 6 THEN SRC6NAME
16 WHEN 7 THEN SRC7NAME
17 WHEN 8 THEN SRC8NAME
18 WHEN 9 THEN SRC9NAME
19 WHEN 10 THEN SRC10NAME
20 WHEN 11 THEN SRC11NAME
21 WHEN 12 THEN SRC12NAME
22 WHEN 13 THEN SRC13NAME
23 WHEN 14 THEN SRC14NAME
24 WHEN 15 THEN SRC15NAME
25 END
26 FROM
27 PlanDBF p
28 Where
29 p.PLAN_NUM = s.PLAN_NUM
30 ) as SourceName
31 FROM
32 SourceDBF s
33 Where
34 SOURCE_NUM NOT IN (
35 SELECT DISTINCT
36 ClientSourceId
37 --SourceName
38 FROM
39 Statement..ClientSources
40 Where
41 ClientId = @ClientId
42 )
I am getting the error in Line number 35 .. the inserts works fine... and if use * instead of the field name or use more than 1 field name i get this error
Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
Any help will be appreciated.
Regards
Karen
View 4 Replies
View Related
Apr 28, 2015
I am getting error [[Msg 116, Level 16, State 1, Line 7 .Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.]] for the below script.
==============================================
Declare @mSql2 Nvarchar(max)
SET @mSql2= (select * from Tablename)
================================================
View 2 Replies
View Related
Jan 4, 2008
I'm trying to do something that should be simple. I want to use a copy database task and make it generic so we can call on it from and application which would pass the database names and file locations.
Any examples or documention would be helpful.
The expression edit that is invoked when you click on the ... only allows you to select databasedetails as the object however databasedetails is a collection and I have several properties in that collection that I need to assign values to via variables. I'm still lost and don't know how to enter the expression so that I can set the properties to the values in the variables. In addition the databasedetials collection has a collection which is the databasefiles collection.
Can you show me how to do this? It really is not clear how to assign the values from the variables to the properties in the collection since the editor does not expose the properties with in the property databasedetails since it is a collection.
so How do you enter and expression to set the properties of databasedetails and databasefiles?
DatabaseDetails.DatabaseName?
DatabaseDetails.DatabaseDestinationName?
DatabaseDetails.DatabaseFiles.0.DestinationFilePath?
DatabaseDetails.DatabaseFile.0.SourceFilePath?
DatabaseDetails.DatabaseFile.0.SourceShareFilePath?
DatabaseDetails.DatabaseFiles.1.DestinationFilePath?
DatabaseDetails.DatabaseFile.1.SourceFilePath?
DatabaseDetails.DatabaseFile.1.SourceShareFilePath?
View 6 Replies
View Related
Feb 8, 2007
Error 3 Error loading MLS_AZ_PHX.dtsx: The result of the expression ""C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
"C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"
Directly using C:sql_working_directoryMLSAZPhoenixDocsArmls_Schema Updated 020107.xls
as connectionString works
However - I'm trying to deploy the package - and trying to use expression:
@[User::DIR_WORKING] + "\Docs\Armls_Schema Updated 020107.xls"
which causes the same error to occur
(Same error with other Excel source also:
Error 5 Error loading MLS_AZ_PHX.dtsx: The result of the expression "@[User::DIR_WORKING] + "\Docs\Armls_SchoolCodesJuly06.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
)
View 4 Replies
View Related
Oct 28, 2015
I have created 1 report with 2 datasets. This report is attached to the 1st dataset.For example,1st one is "Smallappliances", 2nd is "Largeappliances".
I created a tablix and, the 1st column extracts Total sales per Sales person between 2 dates from 1st dataset (Small appliances). I used running values expression and it works fine.
Now, I would like to add another column that extracts Total sales per sales person between 2 dates from 2nd dataset (Large appliances). I am aware that I need to use Lookup expression and it is giving me the single sales value rather than the total sales values. So, I wanted to use RunningValue expression within lookup table to get total sales for large appliances.
This is the lookup expression that I added for the 2nd column.
=Lookup(Fields!salesperson.Value,Fields!sales_person.Value,RunningValue(Fields!sales_amount.Value,
sum, " sales_person"),
"Largeappliances").
I get this error when I preview the report.An error occurred during local report processing.The definition of the report is invalid.An unexpected error occurred in report processing.
(processing): (SortExpression ++ m_context.ExpressionType)
View 7 Replies
View Related
May 14, 2008
2 examples:
1) Rows ordered using textual id rather than numeric id
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
order by
v.id
Result set is ordered as: 1, 11, 2
I expect: 1,2,11
if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
2) SQL server reject query below with next message
Server: Msg 169, Level 15, State 3, Line 16
A column has been specified more than once in the order by list. Columns in the order by list must be unique.
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
cross join (
select 1 id
union select 2 id
union select 11 id
) u
order by
v.id
,u.id
Again, if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
It reproducible on
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
and
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
In both cases database collation is SQL_Latin1_General_CP1251_CS_AS
If I check quieries above on database with SQL_Latin1_General_CP1_CI_AS collation then it works fine again.
Could someone clarify - is it bug or expected behaviour?
View 12 Replies
View Related
May 27, 2008
well I have this code. I connect to database and submit data.
now i dont know which expression to use to validate if data is submited redirect to next level else show some error.
protected void Button1_Click1(object sender, EventArgs e) { SqlConnection con = new SqlConnection(@"somecode");
SqlCommand comm = new SqlCommand(); comm.Connection = con; comm.CommandText = "insertuser"; comm.CommandType = CommandType.StoredProcedure;some code... comm.Connection.Open(); comm.ExecuteNonQuery(); con.Close(); }
i dont wanna validate the fields as i can do it using field validator i wanna check if data is inserted in database.
View 3 Replies
View Related
May 28, 2008
Hi
When I try and create this procedure, I get the error below
CREATE PROCEDURE GetUserSearchTypesCount
-- OUTPUT parameter to hold the count.
@UserID int,
@ReturnVal int OUTPUT
AS
SET @ReturnVal = (SELECT TOP 100 percent searchType, COUNT(searchtype) AS SearchCount
FROM ttracksearchresults
WHERE userid=@UserID
GROUP BY searchtype
ORDER BY searchtype)
GO
Error: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
View 3 Replies
View Related
Feb 7, 2007
I need a statement like:UPDATE tblQuestions SET QuestionNumber = QuestionNumber +1 WHERE QuestionNumber >=10 AND TestID = 1 AND SectionNumber = 1
(Required output is clear from statement itself)
I tried with
UPDATE tblQuestions SET QuestionNumber = EVAL(QuestionNumber +1) WHERE QuestionNumber >=10 AND TestID = 1 AND SectionNumber = 1
and
UPDATE tblQuestions SET QuestionNumber = (QuestionNumber +1) WHERE QuestionNumber >=10 AND TestID = 1 AND SectionNumber = 1
I've just started working with SQL. Please suggest correct approach.
View 3 Replies
View Related
Feb 1, 2008
I have the following code in the expression builder for a ExecuteSQL Task in the Control Flow.
"INSERT dbo.StgFileList SELECT ' " + @[User::MyFile] + " ' "
When I evaluate it, it renders as INSERT Staging.StgXMLFileList SELECT ' '
What am I doing wrong in the expression builder?
View 5 Replies
View Related
Feb 20, 2008
Is it possible to nest expressions within a script in a similar fashion to how they're nested within the expression editor?
I have a requirement to strip trailing digits from a string field, so that only two decimal places are left.
e.g.
1.12345 becomes 1.12
12345.6789 becomes 12345.67
I would do this in the expression editor but I need to use Script component because there are a multitude of conditions that need to be evaluated first which I will do inside a Select Case statement.
I'm wrestling with code that looks like
Newratefield = ratefield.Substring(1, Findstring(ratefield, ".", 1) + 2)
but VB doesn't like the 'Findstring(ratefield, ".", 1) + 2)' part.
Any suggestions on what I can do here?
View 3 Replies
View Related
Jan 9, 2007
Hi,
In RunningValue expression, can we able to put the DataSet name.
Thanks
View 17 Replies
View Related
Jul 27, 2007
Hi,
In ssis I would like to map a column from table a to a column in table b
Currently this is how I am doing it using sql.
I believe I have to use a derived column but not sure how to implement if statement inside it.
Thanks
case
when len([Column 5]) = 0 then ''
when lower([Column 5]) = 'unknown' then ''
when isdate([Column 5]) = 1 then substring(ltrim([Column 5]), 1, 4) + substring(ltrim([Column 5]), 6, 2) + substring(ltrim([Column 5]), 9, 2)
else
null
end,
View 4 Replies
View Related
Dec 20, 2006
The Value expression for the textbox ��Name�� uses an aggregate expression without a scope. A scope is required for all aggregates used outside of a data region unless the report contains exactly one data set....what does this mean...this an error that I have when i try and build my report i get this error for some reason...how do i fix this???
View 4 Replies
View Related
Sep 28, 2007
Hi,
I need to replace a field that might contain a certain character with another should the value occur.
To explain
If i get a hash # in the field, then I need to replace the whole field with a 0 since its a numeric field
I'm just a bit of a noob still with expressions
Regards
View 3 Replies
View Related
Aug 17, 2007
Hi All,
SUM(IIF(Fields!NO.Value >= 1, Fields!tsHours.Value,0))
i write this expression inside the group footer row, it give a #error when generating report.
please help
Cheers
Nick
View 5 Replies
View Related
Aug 26, 2007
Hi,
Is it possible to search in columns with a number datatype (I'm using an MS SQL database with bigint columns) with the ICriterion Expression.Like?
Normally the Expression.Like is used for varchar columns. However, if there's a bigint column with the value 167829 I want to search for example on %678%.
Cheers,
koekie
View 3 Replies
View Related
Jun 30, 2005
Hello,In VB/VB.NET, I can use an expression as such to evaluate true/false:Dim blnValue As Boolean = (SomeObject.Property = "Some value")Can I do this in T-SQL?declare @var bitset @var = ?Thanks.
View 2 Replies
View Related
Jan 12, 2006
Hello, I need to create a table where a column's data should have a hypen inserted after the second character. The table will accept a large input of rows, so I think it would be better to use a SQL expression or formula on the column to provide the hyphen on insert rather than doing an update statement later. There is no way of knowing how many characters will follow the hyphen.
So for example... 888888 would become 88-8888
or 5555555555555555 would become 55-55555555555555
Any help would be great!
View 4 Replies
View Related
Jan 10, 2007
Hi Guys
I have a table in which one of the column name is "NAME".
I have to write query in which column is not null and if there is something then check for 'trust' or 'trustee' in the string. and if found don't pull that record. skip it
who do i do these. Any help please.
View 2 Replies
View Related
Mar 2, 2006
how can i CONCAT 2 columns & () ?
SELECT CONCAT(A,B) AS C From myTAble
but I want to get A (B)
dog (red)
thank you
View 2 Replies
View Related
Mar 25, 2008
HiI'm looking to return rows from a table where a column is LIKE a keyword. This is my current code:SELECT DISTINCT business_name FROM Table WHERE business_name LIKE @keyword + '%' ORDER BY business_name ASCThe problem with this is that if a business is called "The White Ship Inn", and the keyword to match is "White Ship" it will not match. If i put another wild card in front of @keyword then this finds too many matches - i need it to match against columns which either start with the keyword, or have a whitespace in front of them. Is there some kind of T-Sql i can use or will i have to go down the regex route (using this (http://www.codeproject.com/KB/mcpp/xpregex.aspx)) ?cheers
View 2 Replies
View Related
May 6, 2004
Does SqlServer support Regular expression?
I want to know if it's avilable or not...
And if it's not available, I want to know any other efficient way to validate string.. manipulating Regular expression style validation.
Thank you all...
View 6 Replies
View Related
Sep 12, 2005
I have an expression based upon 2 fields in a view that I want to be able to divide and then multiply by a number. Whenever I do the division portion of the calculation all I get are 0 & 1's. I was hoping to use the percentage in other calculations.
Is there something similar to FORMAT(X/Y,0.00)?
(vwLbrPosSum.PosMin/vwMinByEmp.TotMin) x (a)vwLbrPosSum.PosMin or (b) 2400 or (c)vwMinbyEmp.TotMin - 2400
If the person worked more than 40 hrs I could allocate the OTMins to the different positions in labor reporting.
Thanks in advance for your assistance.
View 2 Replies
View Related
Dec 4, 2007
Hi i'd like to create a expression to find if the first character is 0 and if it is then don't display it, but if the first charactar is not 0 then its ok, am trying to do this within a drived column in SSIS
View 14 Replies
View Related
Mar 12, 2008
I'm using SQL 2000 Enterprise Manager Diagram Check Constrains dialog ???????
How do I CHECK Expression so that cust_zip data is:
- all numbers
- 5<=length<=10
Thanks for any help...
View 1 Replies
View Related
Jul 23, 2005
HiI have some data that need to be filtered based on a SET of Id's.If it's about a single ID, then i would pass it as a parameter in astored procedure and use it within the the WHERE Clause, but here thoseID's are determined in run time and I can't simply create a a storedprocedure for an unknown amount of ID's.I looked into the SQL Server 8.0 Manual but had no examples how to usethe Function Filter.Generaly, how can filter some records based on a set of ID's?Best regards
View 1 Replies
View Related
Sep 6, 2005
I need to remove all the [ and ] in every sql stmt where they are usedto close encircling numeric value, fyi, all these sql stmt areconverted from an Access db. For instance,select *from XYZtblwhere fieldA = [1] or fieldA = [2] or fieldA = [3]to beselect *from XYZtblwhere fieldA = 1 or fieldA = 2 or fieldA = 3-- and of course I'd have written in as follows, but that's not-- the pointselect *from XYZtblwhere fieldA IN (1,2,3)Thanks.
View 5 Replies
View Related
