I'm trying to only show yesterday's data based on a date that is stored as a varchar. I converted it to smalldatetime but I'm getting an error that says "Conversion failed when converting date and/or time from character string." I don't know how I have to alter the conversion.
Here is my code:
CONVERT(varchar(20), CONVERT(date, CONVERT(varchar(8), date_added), 112),110) = dateadd(day,datediff(day,1,GETDATE()),0)
I created a procedure called 'Longtextprocedure'. The length of this procedure is 650000 characters long. When I was giving the following query - select len(routine_definition) from INFORMATION_SCHEMA.routines where ROUTINE_NAME = 'Longextprocedure'; Length is showing as '4000' characters long. It is not showing the remaining part of the procedure, it is showing upto the 4000 characters of procedure code. But when you execute the procedure(exec 'Longtextprocedure') it is showing the exact result.
My question is i want to read all the 650000 characters long procedure code{select routine_definition from INFORMATION_SCHEMA.routines where ROUTINE_NAME = 'Longextprocedure'} to a variable which is varchar(max).
When i am trying to read the whole procedure code it is taking 4000 characters of data into the variable not the whole. Is there a way to read the huge procedure code into the variable?
Code:-
CREATE PROCEDURE FAKEPROCEDURE @procName VARCHAR(50) --@procName is 'Longtextprocedure'
AS
BEGIN
DECLARE @routineDefinition VARCHAR(MAX);
DECLARE @replaceToChar VARCHAR(MAX);
[Code] ....
When i am trying to execute the line EXEC(@dupliacteRouteDef), it is showing like there is no procedure defined. This is due to '@dupliacteRouteDef' variable is having 4000 characters of data not the whole data. Is there a way to read whole procedure data into the variable irrespective of the length of the string?
Assume I have a heirarchy like the following:
- John Smith
- James Jones
- Robert Allen
- Lisa Andrews
- Bob Thompson
Now, I have a report where whoever is logged in will only see data for themselves and those below them, so John Smith would see everyone including himself, but Lisa Andres would only see herself and Bob Thompson. James Jones would be able to see everyone except John Smith.
How do I go about implementing this code, for example in an asp.net page where one of the user's logs on to view the report. Currently, there is a T-SQL function that creates a user heirarchy table, but it is very slow and I am curious if SSRS 2005 has any new capabilities in handling this.
Thanks,
Saied
I need to get previous month data in the table based on current date.
In case of execution of each month, the data for previous month should come with date as between
create table TestDate
(Sno Int,
Name varchar(100),
DateofJoin datetime)
insert into TestDate values (1,'Raj', '2/21/2014')
insert into TestDate values (1,'Britto', '6/12/2014')
insert into TestDate values (1,'Kumar', '5/14/2014')
insert into TestDate values (1,'Selva', '6/27/2014')
insert into TestDate values (1,'Ravi', '5/2/2014')
insert into TestDate values (1,'Gopu', '6/2/2014')
/*
if I execute in month July ( ie: today)
select * from TestDate where dateofjoin between 1-june-2014 and 30-june-2014
Result
5 Ravi 2014-05-02 00:00:00.000
3 Kumar 2014-05-14 00:00:00.000
if I execute in month June
select * from TestDate where dateofjoin between 1-may-2014 and 30-may-2014
Result
6Gopu2014-06-02 00:00:00.000
2Britto2014-06-12 00:00:00.000
4Selva2014-06-27 00:00:00.000
/*
Hi guys,
Here's something that I need to do. Might be pretty simple for you guys. :)
I have a table of Employees. All the employees work in some departments. So, I have a table of Department too. Employee table consists of details like EmpID, FirstName, LastName, SAP etc.
Dept table consists of TeamID, TeamNo.
Now, I have another table called as Emp-Team. This table basically maps the employees to the department by taking EmpID and TeamID. There's one more column in this table which is date. This date is required because when some person resigns (say today) then he won't feature in the headcount for July 08 but till June 08 he was there and this is how I maintain my history. e.g All the employees in the Emp_Team table have date as 01/06/2008 for this month. So, in future if I query for the employees who worked in June I will get this list.
Now, I want to copy all this data in the same table again and want to remove any people who have resigned. Their resignation status is in the Employee table, where you have their last working date as well. So, when I add all this data with date 01/07/2008 I want to remove any employees whose last working date is before that.
Can this be done or I have to change my design? In case it can be - How?
Thanks a lot! :)
Hi,
I have a Users table that I use for membership. I am using username varchar(30) as the primary key for this table since username will always be unique.
The question I have is regarding how SQL Server actually stores data:
I see that when I add users, they are always stored alphabetically sorted on username.
I was expecting that all users will appear on the users table in the order they were added.
Example: I have 3 users (john, jonah, wilson). Now I added 4 user with username='bob'
If I execute select * from users, it returns me (bob, john, jonah, wilson). Look bob has become the first row of the table.
My question: Is Sql server moving 3 older rows to make room for 'bob' and it is also rebuilding part of the index due this new username 'bob'?
If this is the case, then it will have big impact if I have 100K users and I add one user that becomes firstrow. In that case 99,999 rows will have to move.
Bottom line, insert, delete will be very expensive.
I know sql server keeps data physically sorted on PK. But I am concerned here since rows are losing the order in which they were inserted.
Thanks
-- My first Data
create table #myfirst (id int, city varchar(20))
insert into #myfirst values (500,'Newyork')
insert into #myfirst values (100,'Ediosn')
insert into #myfirst values (200,'Atlanta')
insert into #myfirst values (300,'Greenwoods')
insert into #myfirst values (400,'Hitchcok')
insert into #myfirst values (700,'Walmart')
insert into #myfirst values (800,'Madida')
-- My Second Data
create table #mySecond (id int, city varchar(20),Sector varchar(2))
insert into #mySecond values (1500,'Newyork','MK')
insert into #mySecond values (5500,'Ediosn','HH')
insert into #mySecond values (5060,'The Atlanta','JK')
insert into #mySecond values (7500,'The Greenwoods','DF')
insert into #mySecond values (9500,'Metro','KK')
insert into #mySecond values (3300,'Kilapr','MK')
insert into #mySecond values (9500,'Metro','NH')
--Third Second Data
create table #myThird (id int, city varchar(20),Sector varchar(2))
insert into #myThird values (33,'Walmart','PP')
insert into #myThird values (20,'Ediosn','DD')
select f.*,s.Sector from #myfirst f join #mySecond s on f.city = s.city
/*
idcitySector
500NewyorkMK
100EdiosnHH
*/
i have doubt on two things
1) How Can i compare the City names, by eliminating 'The ' at the beginning (if there is any in second tale city) between first and second
2) after comparing first and second if there is no match found in second them want to compare with third table values for those not found
--i tried below to solve first doubt, it is working but want to know any other wasys to do it
select f.*,s.Sector from #myfirst f join #mySecond s on replace (f.city, 'THE ','')= replace (s.city, 'THE ','')
--Expected results wull be
create table #ExpectResults (id int, city varchar(20),Sector varchar(2))
insert into #ExpectResults values (200,'Atlanta','JK')
insert into #ExpectResults values (100,'Ediosn','HH')
insert into #ExpectResults values (300,'Greenwoods','DF')
insert into #ExpectResults values (500,'Newyork','MK')
insert into #ExpectResults values (700, 'Walmart','PP')
insert into #ExpectResults values (800, 'Madidar','')
[code]....
I am trying to code a rule at the moment which sets a value based on the value of the previous row. This is as far as I have got so far. I am trying to run it as a set based command and I believe I may need to make use of a numbers table.
Anyway the code is....
declare @data table
(ID int identity(1,1),
DeviceID int,
EventTypeID int,
EventID int)
[Code] ....
So the output is currently incorrect. Each DeviceID needs to have a ID assigned to the MIN(ID) which isn't yet in the code above. This ID has to be sequential across the full table and not dependent on ID.
Next the rule is coded in the case statement above.
So for each DeviceID, when the EventType goes from 1, 2 or 4, to 0 or 3, the following record after the 0 or 3 will have a new EventID. And conversely when the EventType goes from 0 or 3 to 1,2, or 4, the record that is the 1, 2 or 4 will have a new EventID.
I'm storing records that contain a date/time data type. I am needing two links on a reports page (asp), the first should return all records for the current month and the second link should return all records for the last three months (including current month). I have no idea how to just sort by month.
I'm also not sure what to include here in this post to help you answer my question. On the form that is submitted initially the text field is named "txtSubmitDate" and in the database it's stored in a field called "submitdate" and is 8 characters in length.
I've tried:
'SELECT TODAY'S MONTH
SqlJunk = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE())-1"
'SELECT TODAY'S MONTH and the last 2 months
SqlJunk2 = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE()) OR MONTH(submitdate) = MONTH(GETDATE())-1 OR MONTH(submitdate) = MONTH(GETDATE())-2 ORDER BY submitdate ASC"
These are not working because it can't handle the change in year (going from january 2005 back to december 2004, etc).
Any ideas?
I am pretty new to SQL and facing difficulties with a current problem.
I have a list of customers and a sequence of events they have triggered . I know the sequence in which these events have been triggered and only want to increment a value when a new event is triggered (value to remain the same if the event is the same). I have come close to a solution with Dense_rank but the problem here is that the ranking doesn't reset if the same even previously triggered is triggered a bit later in the sequence. see below an example of current results and expected results:
Customer ID,Sequence ID,event,current result,expected result
1,1,A,4,1
1,2,A,4,1
1,3,B,3,2
1,4,C,2,3
1,5,A,4,4
1,6,A,4,4
1,7,E,1,5
1,8,D,5,6
2,1,B,3,1
2,2,C,2,2
2,3,C,2,2
i'd like to use ssis on a certain project but am concerned that one of my transformations needs lookup results to be based on actions taken on previous lookups and that the toolkit doesnt really offer something like that.
so, i have a dataflow whose first component extracts certain kinds of data from an xml document.
each row returned by the latter needs a lookup but the results of that lookup may dictate a certain kind of update. The next row's lookup may need to be influenced by the previous row's update.
So I think I have two challenges, 1) combining a lookup and update, 2) making sure the buffer architecture completes one lookup and update before the next lookup begins.
I need to hide a row based on a value but show it for the rest of the values! this is the expression i am using for the first row is
=IIF(Fields!QuestionRef.Value = "1.2" or "2.1" or "10.2" or "20.2" or "23.2" or "30.1", true , false)
And for the second row
=IIF(Fields!QuestionRef.Value = "1.2" or "2.1" or "10.2" or "20.2" or "23.2" or "30.1", true, false)
But it either hides the row for all values or shows it for all values.
I have a table object attached to a dataset,
One of the columns is based on a boolean value(bit field) from the database.
I have a check picture and an unchecked picture.
How can I show the selected image based on the result?
links or ideas welcome
I need to write a t-sql query that will take the value of the previousrecord into consideration before calculating the current row's newcolumn value...Here's the situation...I have a query which return the following table structure...Full_Name Points----------------- ------------Name1 855Name2 805Name3 800Name4 775Name5 775Name6 741etc.... etc...I need to create a calculated column that tells me where the personranks in point position. The problem i run into is that in thesituation where two or more people have the same point value i need thecalculated rank column to display the same rank number (i.e. 4th orjust "4") I'm not sure how to to take into consideration the previousrow's point value to determine if it is the same as the current onebeing evaluated. If i new they were the same i could assign the samerank value (i.e. 4th or just "4").If any one has any insight that would be great.ThanksJeremy
View 2 Replies View RelatedBelow is the resultset I got using the following SQL statement
SELECT ROW_NUMBER() OVER (PARTITION BY ID ORDER BY create_date DESC) AS RowNum
,ID
,create_date
,NULL AS end_date
FROM dbo.Table_1
Resultset:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 NULL
[Code] ....
Now, I want to update the end_date column with the create_date's values for the next row_number. Desired output is shown below:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 2015-02-18
[Code] ....
I have a scenario to compare previous records based on each ID columns. For each ID, there would be few records, I have a column called "compare", We have to compare all Compare 1 records with Compare 0 Records. If Dt is lesser or equal to comparing DT, then show 0. Else 1
We always only one Compare 0 records in my table, so all compare 1 columns will compare with only one row per ID
My tables look like
Declare @tab1 table (ID Varchar(3), Dt Date, Compare Int)
Insert Into @tab1 values ('101','2015-07-01',0)
Insert Into @tab1 values ('101','2015-07-02',1)
Insert Into @tab1 values ('101','2015-07-03',1)
Insert Into @tab1 values ('101','2015-07-01',1)
Insert Into @tab1 values ('101','2015-06-30',1)
Insert Into @tab1 values ('102','2015-07-01',0)
Insert Into @tab1 values ('102','2015-07-02',1)
Insert Into @tab1 values ('102','2015-07-01',1)
select * from @tab1
1.) In the above scenario for ID = '101', we have 5 records, first record has Compare value 0, which mean all other 4 records need to compare with this record only
2.) If Compare 1 record's Dt is less or equal to Compare 0's DT, then show 0 in next column
3.) If Compare 1 record's Dt is greater than Compare 0's DT, then show 1 in next column
My expected result set should be like ....
I am trying to get 3 report parameters working to show 3 different tables.
table 1 = Area 1 data
table 2 = Regional Area 1
table 3 = Stores in Regional Area 1
Currently I am working on the biggest one. E.g. if all 3 parameters have information in them, then you use table 3. I have written out the coding as the following
=iif(isnothing(Parameters!Area.Value),True, False ) and
iif(isnothing(Parameters!Regional.Value),True, False ) and
iif(isnothing(Parameters!store.Value),True,False)
But it errors stating end of statement expected. What I have missed or not done here?
I do appreciat your help, I want to run a store procedure which will show 6 months . I do not know how to write the procedure, here in the notion in my mind, I want to be able to pass an input parameter (month) to the procedure which will then run a query to show 6 months prior the input parameter month, how can I do that, thanks for your help
Ali
I am pulling down out of range values from a single table on one database to a different table on a different database on a different server (one i have full access to). Basically, it looks something like this:
id1 value1 prev_value1 value2 prev_value2 date prev_date
id2 value1 prev_value1 value2 prev_value2 date prev_date
id3 value1 prev_value1 value2 prev_value2 date prev_date
all the "prev"'s are null. I want to do one do one query that will get me the previous values and dates for each id from the original database. how to do this.
I have a data that with month values ranging from jan 2012 till july 2013 with some values associated with it.
I want to generate months automatically after july 2013 till december 2013 in sql something like the below one:
Is there a way in sql to do this?
I need to hide a column just for certain values from a table like contract decorators I tried using
=IIF(Fields!MainTrade.Value = "Contracts Decorator, Bricklayer", True, False)
But it just hid the column for all values, then i tried this but it doesn't seem to work (Think it's not correct though)
=IIF(Instr("Contracts Decorator, Bricklayer","," & Fields!MainTrade.Value & ",") > 0,true , false).
Below is the table and the highlighted column i am trying to hide just for those two fields. The table has a page break so that it would be displayed on a different page for each value, but i'm not sure it is possible as i have only done it for integers and rows before.
I have looked far and wide and have not found anything that works to allow me to resolve this issue.
I am moving data from DB2 using the MS OLEDB Provider for DB2. The OLEDB source sees the column of data as DT_TEXT. I setup a destination to SQL Server 2005 and everything looks good until I try and run the package.
I get the error:
[OLE DB Source [277]] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
[OLE DB Source [277]] Error: Failed to retrieve long data for column "LIST_DATA_RCVD".
[OLE DB Source [277]] Error: There was an error with output column "LIST_DATA_RCVD" (324) on output "OLE DB Source Output" (287). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [277]] Error: The "output column "LIST_DATA_RCVD" (324)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "LIST_DATA_RCVD" (324)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The PrimeOutput method on component "OLE DB Source" (277) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Any suggestions on how I can get the large string data in the varchar column in DB2 into the varchar(max) column in SQL Server 2005?
I am trying to create a store procedure inside of SQL Management Studio console and I kept getting errors. Here's my store procedure.
Code Block
CREATE PROCEDURE [dbo].[sqlOutlookSearch]
-- Add the parameters for the stored procedure here
@OLIssueID int = NULL,
@searchString varchar(1000) = NULL
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
IF @OLIssueID <> 11111
SELECT * FROM [OLissue], [Outlook]
WHERE [OLissue].[issueID] = @OLIssueID AND [OLissue].[issueID] = [Outlook].[issueID] AND [Outlook].[contents] LIKE + ''%'' + @searchString + ''%''
ELSE
SELECT * FROM [Outlook]
WHERE [Outlook].[contents] LIKE + ''%'' + @searchString + ''%''
END
And the error I kept getting is:
Msg 402, Level 16, State 1, Procedure sqlOutlookSearch, Line 18
The data types varchar and varchar are incompatible in the modulo operator.
Msg 402, Level 16, State 1, Procedure sqlOutlookSearch, Line 21
The data types varchar and varchar are incompatible in the modulo operator.
Any help is appreciated.
I have query which retrieves multiple column vary from 5 to 15 based on input parameter passed.I am using table to map all this column.If column is not retrieved in the dataset(I am not talking abt Null data but column is completely missing) then I want to hide it in my report.
Can I do that??
Any reply showing me the right way is appricited.
-Thanks,
Digs
Because of a limitation on a piece of software I'm using I need to take a large varchar field and force a carriage return/linebreak in the returned sql. Allowing for a line size of approximately 50 characters, I thought the approach would be to first find the 'spaces' in the data, so as to not split the line on a real word. achieve.
--===== Simulate a passed parameter
DECLARE @Parameter VARCHAR(8000)
SET @Parameter = (select a_notes
from dbo.notestuff as notes
where a_id = '1')
[Code] .....
declare @var varchar(8000)
set @var='Name1~50~20~50@Name2~25.5~50~63@Name3~30~80~43@Name4~60~80~23'
---------------------
Create table #tmp(id int identity(1,1),Name varchar(20),Value1 float,Value2 float,Value3 float)
Insert into #tmp (Name,Value1,Value2,Value3)
Values ('Name1',50,20,50 ), ('Name2',25.5,50,63 ), ('Name3',30,80,43 ), ('Name4',60,80,23)
select * from #tmp
I want to convert to @var to same like #tmp table ..
"@" - delimiter goes to rows
"~" - delimiter goes to columns
One of my report has different data types like decimal,percentage and integer values.
When I exported the report to excel , all the values are showing as "general" data type.
How to get excel data type same as ssrs report data type by default when exported to excel?
Need getting a query which I will get previous year, previous month first day everytime i run the query.
Ex: If i run the script on 9/10/2013 then result should be 8/1/2012. (MM/DD/YYYY)
I hope you can help me. I posted this in the microsoft sql server newsgroupa few days ago and got no response so I thought I'd try here. If I canprovide any clarification I'll be glad to do so.I'm trying to calculate a column based on the value of the previous record.I'm not very experienced with SQL-Server.I'm using the following table:CREATE TABLE tblPayment([PaymentID] [int] IDENTITY (1, 1) NOT NULL ,[LoanID] [int] NULL ,[PaymentPeriod] [int] NULL ,[PaymentRecDate] [datetime] NULL ,[PaymentAMT] [money] NULL)I have a view based on this table. That view has the following calculatedcolumnsBeginningBalance: For the first record, this is equal to the loan amountfrom the loan table. For each additional record this is equal to the endingbalance from the previous payment record.Interest: BeginningBalance * the monthly interest rate from the loantablePrincipal: PaymentAMT - InterestEndingBalance: BeginningBalance - PrincipalIt might seem I could use a subquery to calculate the Beginning Balance asin:SELECT LoanID, PaymentPeriod, PaymentAMT,(SELECT SUM(PaymentAMT) FROM tblPayment AS tbl1WHERE tbl1.LoanID = tblPayment.LoanID AND tbl1.PaymentPeriod <tblPayment.PaymentPeriod) AS BeginBalanceFROM tblPaymentWHERE (LoanID = @LoanID)But this will not work, because the interest is calculated on the previousmonth's balance. I need to find a way to loop through the recordset. Isthis possible?Thank you,--Derek CooperDatabase9www.database9.com
View 5 Replies View RelatedI created a report in Reporting Services which was working. Then I filled in the "No Rows" section in the properties of a tablix in the report. Now it shows the No Rows message even if there is data. If I open the Shared Dataset that is used in the report and open Query Designer and run the query I get data.
View 11 Replies View RelatedI would like to transfer selected data from an ODBC-based table to a OLEDB-based table. However, there isn't a data flow source on the Data Flow Design screen to accomodate such an action. Please help!
View 1 Replies View RelatedHere is my code. Basically what I am doing is selecting from the database based on the current user. The ReaderResults.Text label is not showing the info pulled from the database, and the ReaderError.Text label is not showing an error. I also tried putting the ReaderResults.Text label inside the loop and that didnt work. Any suggestions?
'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true")Dim currentUserID
currentUserID = Context.User.Identity.Name.ToString()
Label1.Text = currentUserID
Dim selectSQL As String
selectSQL = "SELECT companyKey FROM Company WHERE UserID = ('" + currentUserID + "')"Dim cmd2 As New SqlCommand(selectSQL, con)
Dim reader As SqlDataReaderDim CompanyKey
Try
con.Open()
reader = cmd2.ExecuteReader()Do While reader.Read()
CompanyKey = reader("CompanyKey").ToString()
Loop
reader.Close()Catch err As Exception
ReaderError.Text = "Error selecting record."
ReaderError.Text &= err.Message
ReaderResults.Text = CompanyKey
Finally
con.Close()
End Try
The ReaderResults.Text is not returning a value. I am not sure what is going on because the table and all columns are full, Label1.Text shows the current username of the user loggedon, and no error is showing up in ReaderError.Text. Anyone have any ideas?
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true")
'Job1 InfoDim currentUserID
currentUserID = Context.User.Identity.Name.ToString()
Label1.Text = currentUserID
Dim selectSQL1 As String
selectSQL1 = "SELECT companyKey FROM Company WHERE UserID = ('" + currentUserID + "')"Dim cmd1 As New SqlCommand(selectSQL1, con)
Dim reader As SqlDataReaderDim CompanyKey
'Job1 Select
Try
con.Open()
reader = cmd1.ExecuteReader()Do While reader.Read()
CompanyKey = reader("CompanyKey").ToString()
Loop
reader.Close()Catch err As Exception
ReaderError.Text = "Error selecting record."
ReaderError.Text &= err.Message
ReaderResults.Text = CompanyKey
Finally
con.Close()
End Try