never seen this before, but I keep getting an error > "Operationg is not allowed while the object is closed" I thought maybe I was getting this due to an error in my stored procedure, however the procedure runs fine. Could this be an error in my procedure that it's just not catching? Or is it more likely to be in my VB code? Anyone know in general why this happens? Thanks.
View 1 RepliesI have this stored procedure on SQL 2005:
USE [Eventlog]
GO
/****** Object: StoredProcedure [dbo].[SelectCustomerSoftwareLicenses] Script Date: 08/07/2007 16:56:32 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[SelectCustomerSoftwareLicenses]
(
@CustomerID char(8)
)
AS
BEGIN
DECLARE @Temp TABLE (SoftwareID int)
INSERT INTO @Temp
SELECT SoftwareID FROM Workstations
JOIN WorkstationSoftware ON Workstations.WorkstationID = WorkstationSoftware.WorkstationID
WHERE Workstations.CustomerID = @CustomerID
UNION ALL
SELECT SoftwareID FROM Notebooks
JOIN NotebookSoftware ON Notebooks.NotebookID = NotebookSoftware.NotebookID
WHERE Notebooks.CustomerID = @CustomerID
UNION ALL
SELECT SoftwareID FROM Machines
JOIN MachinesSoftware ON Machines.MachineID = MachinesSoftware.MachineID
WHERE Machines.CustomerID = @CustomerID
DECLARE @SoftwareInstalls TABLE (rowid int identity(1,1), SoftwareID int, Installs int)
INSERT INTO @SoftwareInstalls
SELECT SoftwareID, COUNT(*) AS Installs FROM @Temp
GROUP BY SoftwareID
DECLARE @rowid int
SET @rowid = (SELECT COUNT(*) FROM @SoftwareInstalls)
WHILE @rowid > 0 BEGIN
UPDATE SoftwareLicenses
SET Installs = (SELECT Installs FROM @SoftwareInstalls WHERE rowid = @rowid)
WHERE SoftwareID = (SELECT SoftwareID FROM @SoftwareInstalls WHERE rowid = @rowid)
DELETE FROM @SoftwareInstalls
WHERE rowid = @rowid
SET @rowid = (SELECT COUNT(*) FROM @SoftwareInstalls)
END
SELECT SoftwareLicenses.SoftwareID, Software.Software, SoftwareLicenses.Licenses, SoftwareLicenses.Installs FROM SoftwareLicenses
JOIN Software ON SoftwareLicenses.SoftwareID = Software.SoftwareID
WHERE SoftwareLicenses.CustomerID = @CustomerID
ORDER BY Software.Software
END
When i execute it in a Query in SQL Studio it works fine, but when i execute it from an ASP page, i get following error:
ADODB.Recordset error '800a0e78'
Operation is not allowed when the object is closed.
/administration/licenses_edit.asp, line 56
Here the conection:
Set OBJdbConnection = Server.CreateObject("ADODB.Connection")
OBJdbConnection.ConnectionTimeout = Session("ConnectionTimeout")
OBJdbConnection.CommandTimeout = Session("CommandTimeout")
OBJdbConnection.Open Session("ConnectionString")
Set SQLStmt = Server.CreateObject("ADODB.Command")
Set RS = Server.CreateObject("ADODB.Recordset")
SQLStmt.CommandText = "EXECUTE SelectCustomerSoftwareLicenses '" & Request("CustomerID") & "'"
SQLStmt.CommandType = 1
Set SQLStmt.ActiveConnection = OBJdbConnection
RS.Open SQLStmt
RS.Close
Can anyone help please?
It this because of the variable tables?
Hi all,
can anyone tell where this error is popping up im my SQL because i can't see why i am getting this error.
Code:
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[bksb_Diag_ESOL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[bksb_Diag_ESOL]
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[bksb_Diag_StuDetails]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[bksb_Diag_StuDetails]
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[bksb_StuRecs]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[bksb_StuRecs]
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[bskb_Diag_Assessments]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[bskb_Diag_Assessments]
GO
CREATE TABLE [dbo].[bksb_Diag_ESOL] (
[Stu Ref No] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[English First Lang] [nvarchar] (8) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Other Lang Work] [nvarchar] (8) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Other Lang Home] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Other Lang Friends] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[bksb_Diag_StuDetails] (
[Stu Ref No] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Group Ref No] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[First Name] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Last Name] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Dob] [smalldatetime] NULL ,
[Maths] [nvarchar] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[English] [nvarchar] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[bksb_StuRecs] (
[StuRefNo] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[FirstName] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[LastName] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[bskb_Diag_Assessments] (
[Stu Ref No] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Assessment] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Section Name] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Curric] [nvarchar] (36) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Total Score] [decimal](18, 0) NULL ,
[Out Of] [decimal](18, 0) NULL ,
[Answers] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Date] [smalldatetime] NULL
) ON [PRIMARY]
GO
Regards
Liam
Wait, please don't ignore this one ... I've already tried all the obvious stuff.
I am currently on a contract assignment, and so cannot post the exact code (at least not at this time), but I should be able to layout the problem enough anyway.
I have a section of code that hits a remote database (same network, same subnet, but different city than the primary SQL database) to retrieve information logged by a digital phone system for display on an intranet screen.
The code is your typical recordset iteration, and looks basically like this.
Note: the connection is created and opened inside the PhoneCenter class. SQL statement used has been verified correct in SQL Server Management Studio.
<snip>
....
Dim rs as adodb.recordset = objPhoneCenter.Conn.execute(SQL)
If rs.recordcount > 0 then
while not rs.eof
.... Data processed here
rs.MoveNext
end while
end if
....
</snip>
This code runs flawlessly, every time, on the development platform but fails at "rs.MoveNext" when pushed out to the production server. What mystifies me is that the "Operation is not allowed when the object is closed" should not occur on code inside an rs.eof test, since the recordset must be open and have data in order to enter such a block.
This is, however, exactly what is happening. In 7 years working with SQL Server and ADO, I've never seen anything quite like this. Does anyone have any insight into what might be going on here?
P.S. I am in the process of attempting to gather more detailed information about this error, which I will post as it arrives if needed. At the moment, the above message is all I have to go on.
We have a nagging issue here in our application side, which I was trying to troubleshoot and reach no where. Can I have your valuable inputs for resolving/understanding the root cause of the issue?
3709-The connection cannot be used to perform this operation. It is either closed or invalid in this context
This error is not coming regularly (twice it happened and after the program is running successfully with out any problem). Problem having exe is running every 2 minutes interval.
Most of the sites saying this is something related to code written in the application but if that is the case why this error is not happening continuously? The problem having exe is running past 4 months with 2 minutes interval and suddenly thrown this error.
I found one MS site describing about this error but not able to find any fixes for this issue (http://support.microsoft.com/kb/839428). We are on the process of upgrading the operating system with SP2; will this help us to resolve this issue? Please advice.
Details
1. Windows 2003 with SP1
2. MDAC 2.8
3. SQL 2005 with SP1
4. VB Application.
i am running a java program in tomcat to connect SQL Server,using the Microsoft's jdbc driver ,as the following code :
import java.sql.*;
class Bkjz{
ResultSet rs=null;
String spde;
String condition;
Connection con=null;
Statement sql;
public String getSpde(){
return spde;
}
public void setSpde(String spde){
this.spde=spde;
}
public ResultSet Searchsjk(){
try {
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
con=DriverManager.getConnection("jdbc:microsoft:sqlserver://localhost:1433;databasename=zkbm","zkbm","zkbm");
sql=con.createStatement(ResultSet.TYPE_SCROLL_SENS ITIVE,ResultSet.CONCUR_READ_ONLY);
if(spde.equals(""))
condition="select CRCC,CRNM,SPDE,SPNM from SPCR where EMTP='5'group by SPDE,SPNM,CRCC,CRNM";
else
condition="select CRCC,CRNM,SPDE,SPNM from SPCR where SPDE='"+spde+"'"+"and EMTP='5' group by SPDE,SPNM,CRCC,CRNM";
rs=sql.executeQuery(condition);
//con.close();
if(!rs.next())
{
return null;
}
else
{
rs.previous();
return rs;
}
}
catch(Exception e){
message="exception!!! "+e.toString();
System.out.println(e);
return null;
}
}
}
public class Bk{
public static void main(String args[]){
Bkjz bbb=new Bkjz();
bbb.setSpde("1020110");
try{
ResultSet rr=bbb.Searchsjk();
while(rr.next()){
System.out.println(rr.getString("CRCC"));
}
}
catch(Exception e){
System.out.println(e);
}
}
}
without con.close(),it can return Resultset ,but when includeing con.close(),an Exception tell me:Object has been closed, in other programms i've close connection,but it never throws this Exception,why? thanks
I'm getting object closed when returning a recordset from a stored procedure. I've tested the select statement in Query Analyzer and a value is getting returned. So, I'm not sure if my code for my stored procedure is incorrect?
Here is the code for the procedure:
CREATE Procedure dbo.GetRepEmailByZip
@sessionid varchar(50),
@zip varchar(5)
AS
Begin Transaction
INSERT INTO dbo.SupportRequests(firstname,lastname,schoolname, address,city,state,zip,phone,email,currentcustomer ,implementationtype,producttype,comment)
(SELECT FirstName,LastName,SchoolName,Address,City,State,Z ip,Phone,Email,CurrentCustomer,ImplementationType, ProductType,Comment
FROM dbo.Temp_ContactInfo
WHERE sessionid = @sessionid)
--If Transacation fails, stop execution of procedure, return error code and Rollback Transaction
IF @@ERROR<>0 OR @@RowCount = 0
BEGIN
ROLLBACK TRANSACTION
--return value
RETURN 1
END
--If Transaction succeeds, commit transaction, continue and process the select statement
COMMIT TRANSACTION
SELECT r.email
FROM PostalCodes p
INNER JOIN TerritoryList z ON p.ZipID = z.ZipID
INNER JOIN RepList r ON r.RepID = z.RepID
WHERE p.ZipCode = @zip
GO
This is the code I'm calling to execute the procedure and return the recordset:
set GetRepEmail = Server.CreateObject("ADODB.Command")
With GetRepEmail
.ActiveConnection = MM_DBConn_STRING
.CommandText = "dbo.GetRepEmailByZip"
.CommandType = 4
.CommandTimeout = 0
.Prepared = true
.Parameters.Append .CreateParameter("@RETURN_VALUE", 3, 4)
.Parameters.Append .CreateParameter("@sessionid", 200, 1,50,usrid)
.Parameters.Append .CreateParameter("@zip", 200, 1,5,zip)
set RepEmail = .Execute()
End With
Dim x, y
x = RepEmail.RecordCount
y = RepEmail.State
Response.Write(x)
Response.Write("<br>")
Response.Write(y)
'Response.Write(RepEmail("email"))
Response.End()
I'm getting "Operation is not allowed when the object is closed", which is occuring on the following line:
x = RepEmail.RecordCount
I'm trying to determine if this is problem within my procedure or in the application code.
Thanks in advance for any help.
Hello,
We are getting this error when a user clients any report. they can see the directories OK, but when we upload a new report the error still happens.
Error is "Operation is not valid due to the current state of the object."
Any ideas?
Thanks
Michael
Good morning,
I have created a very simple report that works correctly when in Report Designer Preview mode. When I deploy to the report server it reports that deployment was successful. When I log into Report Manager the report is visible, but when I click on it I end up at an error page.
The error that I get is:
Operation is not valid due to the current state of the object.
Appreciate any help on this.
Thanks
Stuart
Aaaaaarrgghh ! (that's better)I am trying to convert a field within my Oracle 9i Database that is oftype BLOB (but this BLOB may contain a combination of clobs/varchars orimages such as gif images, jpg images) to Microsoft SQL Server 2000using Microsoft DTS.On trying to perform this simple conversion I recieved the error "Needto run the object to perform the operation - Exception AccessViolation" from Microsoft DTS and my table that contains this BLOBfield is not converted across.After further investigation I implemented the fixes suggested by theMicrosoft Knowledge Base and "sqldts.com" but still no joy the errorkept occuring.I discovered my modifying the step in the DTS package that handled thistable conversion that contained the BLOB column that when I changed thedata type on my SQL Server target table to VARBINARY and modified thequery so that only the BLOBs that contained clobs/varchars were broughtacross that the error went away.I then proceeded to create another DTS package step that had a querythat only brought across the BLOB column that contained images such asgif images/jpeg images etc. and the error went away and the target typefor the SQL Server target table was set to IMAGE.As the data for this BLOB contains a combination of VARCHARS/CLOBS(concatanted) and also GIF IMAGES/JPEGS in the same source column withOracle 9i I require the same in my target table within SQL server asone column (and I should be able to do that with type IMAGE especiallyas it can store larger objects than VARBINARY but any source BLOBS thatcontain VARCHAR/CLOBs don't seem to want to be loaded as IMAGE theywill only load in to VARBINARY).However judging by my experiences above this doesn't seem to bepossible ?Can anyone help me out with this ?I am on Microsoft SQL Server 2000 Service Pack 4 with latest MDAC(2.8.1).Cheers,Gary
View 1 Replies View RelatedI want to create subscription for a report.
While creating it gives error "Operation is not valid due to the current state of the object".
I am able to create subscription for other reports deployed. But it gives error for subscription of a particular report.
Tried deploying the report with other name then too it does not allow me to create subscription.
I have a On_hand_Quantity report which has a parameter drop down to select about 200 stores.
When i run this report in BI studio , selecting all the 200 stores for the parameter it works fine.
But when i upload the same report to report manager and try selecting all the store_numbers it errors out saying 'operation cannot run due to current state of the object ' This report was running fine since the past 2 years, on 30th dec we did some .NET updates (KB2656356 and KB2656351) after which this report stopped working.
I tried troubleshooting all ways but it errors out only in report manager.
What is Msetup.exe
View 3 Replies View RelatedHi,
Using the Microsoft Patterns and Practices "Object Builder" (Dependency Injection/Builder library), I wrote an SQL CLR Stored Procedure (using VS 2005 Professional).
All compiles and deploys ok (to SQL Server 2005 Express).
However, at run-time, I get the following error upon a "BuilderContext" object's instantiation: {"Attempted to perform an operation that was forbidden by the CLR host."}
Thoughts on how to get ObjectBuilder working in the SQLCLR?
Thanks!
Andy
(posted below is the sample code...with the run-time exception occuring on the ...BuilderContext cxt = new ... call)
Microsoft.Practices.ObjectBuilder.BuilderStrategyChain chain =
new Microsoft.Practices.ObjectBuilder.BuilderStrategyChain();
chain.Add(new Microsoft.Practices.ObjectBuilder.CreationStrategy());
Microsoft.Practices.ObjectBuilder.Locator locator1 =
new Microsoft.Practices.ObjectBuilder.Locator(null);
// Get error when new'ing BuilderContext: "Attempted to perform an operation that was forbidden by the CLR host."
Microsoft.Practices.ObjectBuilder.BuilderContext cxt =
new Microsoft.Practices.ObjectBuilder.BuilderContext(chain, locator1, null);
Hi, I was trying to run an insert statement which has subquery, But it is returning the error like this..
Subqueries are not allowed in this context. Only scalar expressions are allowed.
--------------
Is there a way to reparse the insert statement without have to assign the subquery to a temp value and insert it?
thanks..
Here is my SQL..
insert into admincriteria values (nextID,(select id from nodetable where description like 'Example - Quality Analytics'),8071,2,'Failures by Customer',2,0,0)
I'm using SQL Server 2012 Analysis services in Tabular mode and connected to Oracle Database and while importing, I'm getting below error after importing some rows.
OLE DB or ODBC error: Accessor is not a parameter accessor.. The current operation was cancelled because another operation in the transaction failed.
thx but this code not needed anymore
sry
Hi There,This is related to a ms access database but since I use the SqlDataSource control I thought I should post here.I have a project that I was working on with this ms access db and using sql controls, everything was working just finesince one day I started getting "Object reference not set to an instance of an object" messages when I try to designa query or retrieve a schema, nothing works at design time anymore but at runtime everything is perfect, its a lotof work for me now to create columns,schemas and everything manually, I've tried reinstalling visualstudio, ado componentsbut nothing seems to fix it, did this ever happen to any of you guys?any tip is really appreciated thanks a lot
View 2 Replies View RelatedDoes any one has any clue for this error ? I did went through a lot of articles on this error but none helped . I am working in Visual studie 2005 and trying to upload image in sql database through a simple form. Here is the code
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Data.SqlClient;
using System.Web.Configuration;
using System.IO;
public partial class Binary_frmUpload : System.Web.UI.Page
{protected void Page_Load(object sender, EventArgs e)
{
}protected void btnUpload_Click(object sender, EventArgs e)
{if (FileUpload.HasFile == false)
{
// No file uploaded!lblUploadDetails.Text = "Please first select a file to upload...";
}
else
{string str1 = FileUpload.PostedFile.FileName;
string str2 = FileUpload.PostedFile.ContentType; string connectionString = WebConfigurationManager.ConnectionStrings["GSGA"].ConnectionString;
//Initialize SQL Server Connection SqlConnection con = new SqlConnection(connectionString);
//Set insert query string qry = "insert into Officers (Picture,PictureType ,PicttureTitle) values(@ImageData, @PictureType, @PictureTitle)";
//Initialize SqlCommand object for insert. SqlCommand cmd = new SqlCommand(qry, con);
//We are passing Original Image Path and Image byte data as sql parameters. cmd.Parameters.Add(new SqlParameter("@PictureTitle", str1));
cmd.Parameters.Add(new SqlParameter("@PictureType", str2));Stream imgStream = FileUpload.PostedFile.InputStream;
int imgLen = FileUpload.PostedFile.ContentLength;byte[] ImageBytes = new byte[imgLen]; cmd.Parameters.Add(new SqlParameter("@ImageData", ImageBytes));
//Open connection and execute insert query.
con.Open();
cmd.ExecuteNonQuery();
con.Close(); //Close form and return to list or images.
}
}
}
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.Source Error:
Line 32:
Line 33: string str2 = FileUpload.PostedFile.ContentType;
Line 34: string connectionString = WebConfigurationManager.ConnectionStrings["GSGA"].ConnectionString;
Line 35:
Line 36: //Initialize SQL Server Connection Source File: c:UsersManojDocumentsVisual Studio 2005WebSitesGSGABinaryfrmUpload.aspx.cs Line: 34
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Binary_frmUpload.btnUpload_Click(Object sender, EventArgs e) in c:UsersManojDocumentsVisual Studio 2005WebSitesGSGABinaryfrmUpload.aspx.cs:34
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Hello All
Not sure if this is the right forum to post this question to, so if it's not, please accept my apologies.
I'm working in SQL Server 2005 with a database that was migrated to 2005 from SQL Server 2000. I have to alter a trigger on a table for some functionality changes, and when I modify the trigger and then access it through the application the database is working with, I receive this error:
There was a error in the [stored procedure name] procedure. Error Number: -2147217900 Error Description: [Microsoft][ODBC SQL Server Driver][SQL Server]The definition of object '[trigger name]' has changed since it was compiled.
[stored procedure name] and [trigger name] are where the actual names appear in the message.
I've tried running sp_recompile on the trigger, stored procedure, and table that are associated with this, and nothing works. I have dropped the trigger, which allows the save process to complete (but doesn't perform the required functionality, of course), and then re-created the trigger, but the error message still comes up. The compatibility level for the database is SQL Server 2000 (80) (as it was migrated from SQL Server 2000 as I mentioned above).
Has anyone seen this, and if so, how can I fix it?
Thanks in advance for your help!
Jay
Help! I have posted this before and I had hoped that the VS2005 SP1 would help my problem. It didn't. My code is shown below. I have dropped a sqlconnection, sqldataadapter and a strongly-typed dataset from the toolbox onto the component designer for my page and written my code. It compiles without any errors but at runtine I receive the system error "Object reference not set to an instance of an object." The error occurs at the first line where the sqldataadapter is mentioned. I have shufflled the code and the error still occurs at first mention of the dataadapter. I have set parameters to a simple string such as "myemail." It hasn't helped. I have used the "Dim" statement as "Dim DaAuthorLogin as System.Data.SqlClient.SqlDataadapter and Dim DaAuthorLogin as New ......) at the start of the private sub generated by the event requiring the data. Nothing helps. Here is my simple code to select data from a sqlserver 2000 database. Why do I continue to get this error?
Partial Class AuthorLogin
Inherits System.Web.UI.Page
Protected WithEvents AuthorInformation As System.Web.UI.Page
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.SqlSelectCommand1 = New System.Data.SqlClient.SqlCommand
Me.DaAuthorLogin = New System.Data.SqlClient.SqlDataAdapter
Me.MDData = New System.Data.SqlClient.SqlConnection
Me.DsAuthorLogin = New MedicalDecisions.DsAuthorLogin
CType(Me.DsAuthorLogin, System.ComponentModel.ISupportInitialize).BeginInit()
'
'SqlSelectCommand1
'
Me.SqlSelectCommand1.CommandText = "SELECT AuthorAlias, AuthorEmail, AuthorPassword, LastName, PreferredName" & Global.Microsoft.VisualBasic.ChrW(13) & Global.Microsoft.VisualBasic.ChrW(10) & "FRO" & _
"M T_Author" & Global.Microsoft.VisualBasic.ChrW(13) & Global.Microsoft.VisualBasic.ChrW(10) & "WHERE (AuthorEmail = @AuthorEmail) AND (AuthorPassword =" & _
" @AuthorPassword)"
Me.SqlSelectCommand1.Connection = Me.MDData
Me.SqlSelectCommand1.Parameters.AddRange(New System.Data.SqlClient.SqlParameter() {New System.Data.SqlClient.SqlParameter("@AuthorEmail", System.Data.SqlDbType.NVarChar, 50, "AuthorEmail"), New System.Data.SqlClient.SqlParameter("@AuthorPassword", System.Data.SqlDbType.NVarChar, 50, "AuthorPassword")})
'
'DaAuthorLogin
'
Me.DaAuthorLogin.SelectCommand = Me.SqlSelectCommand1
Me.DaAuthorLogin.TableMappings.AddRange(New System.Data.Common.DataTableMapping() {New System.Data.Common.DataTableMapping("Table", "T_Author", New System.Data.Common.DataColumnMapping() {New System.Data.Common.DataColumnMapping("AuthorAlias", "AuthorAlias"), New System.Data.Common.DataColumnMapping("AuthorEmail", "AuthorEmail"), New System.Data.Common.DataColumnMapping("AuthorPassword", "AuthorPassword"), New System.Data.Common.DataColumnMapping("LastName", "LastName"), New System.Data.Common.DataColumnMapping("PreferredName", "PreferredName")})})
'
'MDData
'
Me.MDData.ConnectionString = "Data Source=CIS1022DAVID;Initial Catalog=CGData;Integrated Security=True;Pooling" & _
"=False"
Me.MDData.FireInfoMessageEventOnUserErrors = False
'
'DsAuthorLogin
'
Me.DsAuthorLogin.DataSetName = "DsAuthorLogin"
Me.DsAuthorLogin.SchemaSerializationMode = System.Data.SchemaSerializationMode.IncludeSchema
CType(Me.DsAuthorLogin, System.ComponentModel.ISupportInitialize).EndInit()
End Sub
Friend WithEvents SqlSelectCommand1 As System.Data.SqlClient.SqlCommand
Friend WithEvents MDData As System.Data.SqlClient.SqlConnection
Friend WithEvents DaAuthorLogin As System.Data.SqlClient.SqlDataAdapter
Friend WithEvents DsAuthorLogin As MedicalDecisions.DsAuthorLogin
'NOTE: The following placeholder declaration is required by the Web Form Designer.
'Do not delete or move it.
Private designerPlaceholderDeclaration As System.Object
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs)
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
'no code here
End Sub
Private Sub AuthorLoginRegister_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AuthorLoginRegister.Click
'for new author registration
Response.Redirect("AuthorInformation.aspx")
End Sub
Private Sub AuthorLoginBack_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AuthorLoginBack.Click
'to navigate back
Response.Redirect("MainPaths.aspx")
End Sub
Protected Sub AuthorLoginPassword_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AuthorLoginPassword.TextChanged
'pass the parameters to the dataadapter and return dataset
DaAuthorLogin.SelectCommand.Parameters("@AuthorEmail").Value = AuthorLoginEmail.Text
DaAuthorLogin.SelectCommand.Parameters("@AuthorPassword").Value = AuthorLoginPassword.Text
MDData.Open()
DaAuthorLogin.Fill(DsAuthorLogin, "T_Author")
MDData.Close()
'set session objects
If DsAuthorLogin.T_Author.Rows.Count > 0 Then
Session("AuthorAlias") = DsAuthorLogin.T_Author(0).AuthorAlias
Session("LastName") = DsAuthorLogin.T_Author(0).LastName
Session("PreferredName") = DsAuthorLogin.T_Author(0).PreferredName
Response.Redirect("AuthorPaths.aspx")
Else : AuthorLoginNotValid.Visible = True
AuthorLoginEmail.Text = ""
AuthorLoginPassword.Text = ""
End If
End Sub
End Class
Thanks in advance,
David
Anyone know what this error means and how to get rid of it?
Public Sub Main()
Dim myMessage As Net.Mail.MailMessage
Dim mySmtpClient As Net.Mail.SmtpClient
myMessage.To(20) = New Net.Mail.MailAddress(me@hotmail.com)
myMessage.From = New Net.Mail.MailAddress(someone@microsoft.com)
myMessage.Subject = "as;dlfjsdf"
myMessage.Priority = Net.Mail.MailPriority.High
mySmtpClient = New Net.Mail.SmtpClient("microsoft.com")
mySmtpClient.Send(myMessage)
Dts.TaskResult = Dts.Results.Success
End Sub
Thanks,
Hi,
I am trying to develop a custom algorithm. I have implemented and tested training methods, however I fail at prediction phase. When I try to run a prediction query against a model created with my algorithm I get:
Executing the query ...
Obtained object of type: Microsoft.AnalysisServices.AdomdClient.AdomdDataReader
COM error: COM error: DMPluginWrapper; Object reference not set to an instance of an object..
Execution complete
I know this is not very descriptive, but I have seen that algorith doesn't even executes my Predict(..) function (I can test this by logging to a text file)
So the problem is this, when I run prediction query DMPluginWrapper gives exception -I think- even before calling my custom method.
As I said it is not a very descriptive message but I hope I have hit a general issue.
Thanks...
I am trying to send some data back to our as/400 from SQL server. Before I do so I need to delete entries from the table. I have an odbc connection set up and have used it sucessfully in a datareader compoenent but but when I try to use it for a delete SQL task it give me the followign error. what am I doing wrong? I even tried hardcoding in the system name/library name.
Here is my delete sql script
DELETE FROM DSSCNTL Where Companycode = 10
TITLE: SQL Task
------------------------------
Object reference not set to an instance of an object.
------------------------------
BUTTONS:
OK
------------------------------
When I try and run Report Builder Reports i get this error message "Object reference not set to an instance of an object. "
I can run reports locally but not from Report manager
here is the stack trace info
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Reporting.WebForms.WebRequestHelper.GetExceptionForMoreInformationNode(XmlNode moreInfo, XmlNamespaceManager namespaces) +18
Microsoft.Reporting.WebForms.WebRequestHelper.ExceptionFromWebResponse(Exception e) +358
Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +482
Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +958
Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +143
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +75
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +154
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
Getting the following error-message:
OS: Windows Server 2008 R2 Standard
64bit
Office 2010
Power Pivot Tables are fed by Power Query queries.
Hi Everyone,
Please help me on this issue. I'm a new SSIS User.
I've installed Sql Server 2005 Developer Edition
When I create a new SSIS Project in Business Intelligence Development Studio,
I get the following message:
"Microsoft Visual Studio is unable to load this document: Object reference is not set to an instance of an object".
Error loading 'package.dtsx'bject reference is not set to an instance of an object
When I try to debug the package, I get the below message:
parameter Component(System.Design) is null.
I've uninstalled and installed SS 2005 several times, yet the problem persists.
Please help.
This is the package.dtsx
<?xml version="1.0"?><DTS:Executable xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:ExecutableType="MSDTS.Package.1"><DTSroperty DTS:Name="PackageFormatVersion">2</DTSroperty><DTSroperty DTS:Name="VersionComments"></DTSroperty><DTSroperty DTS:Name="CreatorName">USkothand1</DTSroperty><DTSroperty DTS:Name="CreatorComputerName">US6051KOTHAND1</DTSroperty><DTSroperty DTS:Name="CreationDate" DTSataType="7">4/8/2008 10:53:39 AM</DTSroperty><DTSroperty DTS:Name="PackageType">5</DTSroperty><DTSroperty DTS:Name="ProtectionLevel">1</DTSroperty><DTSroperty DTS:Name="MaxConcurrentExecutables">-1</DTSroperty><DTSroperty DTS:Name="PackagePriorityClass">0</DTSroperty><DTSroperty DTS:Name="VersionMajor">1</DTSroperty><DTSroperty DTS:Name="VersionMinor">0</DTSroperty><DTSroperty DTS:Name="VersionBuild">0</DTSroperty><DTSroperty DTS:Name="VersionGUID">{FBD98635-EDDE-4F58-9D53-356E8CB653FB}</DTSroperty><DTSroperty DTS:Name="EnableConfig">0</DTSroperty><DTSroperty DTS:Name="CheckpointFileName"></DTSroperty><DTSroperty DTS:Name="SaveCheckpoints">0</DTSroperty><DTSroperty DTS:Name="CheckpointUsage">0</DTSroperty><DTSroperty DTS:Name="SuppressConfigurationWarnings">0</DTSroperty><DTSroperty DTS:Name="ForceExecValue">0</DTSroperty><DTSroperty DTS:Name="ExecValue" DTSataType="3">0</DTSroperty><DTSroperty DTS:Name="ForceExecutionResult">-1</DTSroperty><DTSroperty DTS:Name="Disabled">0</DTSroperty><DTSroperty DTS:Name="FailPackageOnFailure">0</DTSroperty><DTSroperty DTS:Name="FailParentOnFailure">0</DTSroperty><DTSroperty DTS:Name="MaxErrorCount">1</DTSroperty><DTSroperty DTS:Name="ISOLevel">1048576</DTSroperty><DTSroperty DTS:Name="LocaleID">1033</DTSroperty><DTSroperty DTS:Name="TransactionOption">1</DTSroperty><DTSroperty DTS:Name="DelayValidation">0</DTSroperty>
<DTS:LoggingOptions><DTSroperty DTS:Name="LoggingMode">0</DTSroperty><DTSroperty DTS:Name="FilterKind">1</DTSroperty><DTSroperty DTS:Name="EventFilter" DTSataType="8"></DTSroperty></DTS:LoggingOptions><DTSroperty DTS:Name="ObjectName">Package</DTSroperty><DTSroperty DTS:Name="DTSID">{191D188C-EA6E-46D6-A46A-8C9F3C21C321}</DTSroperty><DTSroperty DTS:Name="Description"></DTSroperty><DTSroperty DTS:Name="CreationName">MSDTS.Package.1</DTSroperty><DTSroperty DTS:Name="DisableEventHandlers">0</DTSroperty></DTS:Executable>
Thanks
Best Regards
Hi All,
i have a table in MS Access with CandidateId and Image column. Image column is in OLE object format. i need to move this to SQL server 2005 with CandidateId column with integer and candidate Image column to Image datatype.
its very udgent, i need any tool to move this to SQL server 2005 or i need a code to move this table from MS Access to SQL server 2005 in C#.
please do the needfull ASAP. waiting for your reply
with regards
Just installed VS 2005 & SQLServer 2005 clients on my workstation. When trying to create a new Integration Services Project and start work in the designer receive the MICROSOFT VISUAL STUDIO 'Object reference not set to an instance of an object.' dialog box with message "Creating project 'Integration Services project1'...project creation failed."
Previously I had SQLServer 2000 client with the little VS tool that came with it installed. Uninstalled these prior to installing the 2005 tools (VS and SQLServer).
I'm not finding any information on corrective action for this error.
Any one have this problem and found the solution?
Thanks,
CLC
Each time I press submit to insert data into the database I receive the following message. I use the same code on another page and it works fine. Here is the error:
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
Line 125: MyCommand.Parameters("@Balance").Value = txtBalance.Text
Line 126:
Line 127: MyCommand.Connection.Open()
Line 128:
Line 129: Try
Source File: c:inetpubwwwrootCreditRepairCreditor_Default.aspx.vb Line: 127
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
CreditRepair.CreditRepair.Vb.Creditor_Default.btnSaveAdd_Click(Object sender, EventArgs e) in c:inetpubwwwrootCreditRepairCreditor_Default.aspx.vb:127
System.Web.UI.WebControls.Button.OnClick(EventArgs e)
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
If (Page.IsValid) Then
Dim DS As DataSet
Dim MyCommand As SqlCommand
Dim AddAccount As String = "insert into AccountDetails (Account_ID, Report_ID, Balance) values (@Account_ID, @Report_ID, @Balance)"
MyCommand = New SqlCommand(AddAccount, MyConnection)
MyCommand.Parameters.Add(New SqlParameter("@Account_ID", SqlDbType.Char, 50))
MyCommand.Parameters("@Account_ID").Value = txtAccount_ID.Text
MyCommand.Parameters.Add(New SqlParameter("@Report_ID", SqlDbType.Char, 50))
MyCommand.Parameters("@Report_ID").Value = txtReport_ID.Text
MyCommand.Parameters.Add(New SqlParameter("@Balance", SqlDbType.Char, 50))
MyCommand.Parameters("@Balance").Value = txtBalance.Text
MyCommand.Connection.Open()
MyCommand.ExecuteNonQuery()
Response.Redirect("Customer_Details.aspx?SS='CustHeadGrid.Columns[0].Item.lblSS.Text)")
MyCommand.Connection.Close()
End If
I am trying to execute this code feom Script task while excuting its giving me error that "Object reference not set to an instance of an object." The assemblies Iam referening in this code are there in GAC. Any idea abt this.
Thanks,
Public Sub Main()
Dim remoteUri As String
Dim fireAgain As Boolean
Dim uriVarName As String
Dim fileVarName As String
Dim httpConnection As Microsoft.SqlServer.Dts.Runtime.HttpClientConnection
Dim emptyBytes(0) As Byte
Dim SessionID As String
Dim CusAuth As CustomAuth
Try
' Determine the correct variables to read for URI and filename
uriVarName = "vsReportUri"
fileVarName = "vsReportDownloadFilename"
' create SessionID for use with HD Custom authentication
CusAuth = New CustomAuth(ASCIIEncoding.ASCII.GetBytes(Dts.Variables("in_vsBatchKey").Value.ToString()))
Dts.Variables(uriVarName).Value = Dts.Variables(uriVarName).Value.ToString() + "&" + _
"BeginDate=" + Dts.Variables("in_vsBeginDate").Value.ToString() + "&" + _
"EndDate=" + Dts.Variables("in_vsEndDate").Value.ToString()
Dim request As HttpWebRequest = CType(WebRequest.Create(Dts.Variables(uriVarName).Value.ToString()), HttpWebRequest)
'Set credentials based on the credentials found in the variables
request.Credentials = New NetworkCredential(Dts.Variables("in_vsReportUsername").Value.ToString(), _
Dts.Variables("in_vsReportPassword").Value.ToString(), _
Dts.Variables("in_vsReportDomain").Value.ToString())
'Place the custom authentication session ID in a cookie called BatchSession
request.CookieContainer.Add(New Cookie("BatchSession", CusAuth.GenerateSession("EmailAlertingSSIS"), "/", Dts.Variables("in_vsReportDomain").Value.ToString()))
' Set some reasonable limits on resources used by this request
request.MaximumAutomaticRedirections = 4
request.MaximumResponseHeadersLength = 4
' Prepare to download, write messages indicating download start
Dts.Events.FireInformation(0, String.Empty, String.Format("Downloading '{0}' from '{1}'", _
Dts.Variables(fileVarName).Value.ToString(), Dts.Variables(uriVarName).Value.ToString()), String.Empty, 0, fireAgain)
Dts.Log(String.Format("Downloading '{0}' from '{1}'", Dts.Variables(fileVarName).Value.ToString(), Dts.Variables(uriVarName).Value.ToString()), 0, emptyBytes)
' Download data
Dim response As HttpWebResponse = CType(request.GetResponse(), HttpWebResponse)
' Get the stream associated with the response.
Dim receiveStream As Stream = response.GetResponseStream()
' Pipes the stream to a higher level stream reader with the required encoding format.
Dim readStream As New StreamReader(receiveStream, Encoding.UTF8)
Dim fileStream As New StreamWriter(Dts.Variables(fileVarName).Value.ToString())
fileStream.Write(readStream.ReadToEnd())
fileStream.Flush()
fileStream.Close()
readStream.Close()
fileStream.Dispose()
readStream.Dispose()
'Download the file and report success
Dts.TaskResult = Dts.Results.Success
Catch ex As Exception
' post the error message we got back.
Dts.Events.FireError(0, String.Empty, ex.Message, String.Empty, 0)
Dts.TaskResult = Dts.Results.Failure
End Try
End Sub
Hi all,
I'm getting this problem 'Object reference not set to an instance of an object.' whenever I try to review a report and I checked the log file and this is what it had
w3wp!ui!1!11/14/2006-10:54:20:: Unhandled exception: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Reporting.WebForms.WebRequestHelper.GetExceptionForMoreInformationNode(XmlNode moreInfo, XmlNamespaceManager namespaces)
at Microsoft.Reporting.WebForms.WebRequestHelper.ExceptionFromWebResponse(Exception e)
at Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WebForms.ServerReport.GetStyleSheet(String styleSheetName)
at Microsoft.Reporting.WebForms.ReportServerStyleSheetOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response)
at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Some previous forums stated checking the webconfig file but the web config file look okay. Is there another way to fix this.
Much Thanks,
Carl
Hello -
For the life of me I cannot figure out why i'm getting the "Object Refence Not Set To an Instance of An Object" error after I try and create a Report Services project in Business Intelligence Studio. I've followed all of the steps in similar posts such as checking the ReportServer/web.config file but everything checks out.
Does anyone have any other ideas as to how I can get rid of this annoying error and start creating some reports?
Thanks!!!