I received this error when I tried to change the Authentication mode from windows to windows and sql server. a window popped for sa password and i put my password and the error pops. im using sql server 2005.can help?
View 3 RepliesHello,
We are getting this error when a user clients any report. they can see the directories OK, but when we upload a new report the error still happens.
Error is "Operation is not valid due to the current state of the object."
Any ideas?
Thanks
Michael
Good morning,
I have created a very simple report that works correctly when in Report Designer Preview mode. When I deploy to the report server it reports that deployment was successful. When I log into Report Manager the report is visible, but when I click on it I end up at an error page.
The error that I get is:
Operation is not valid due to the current state of the object.
Appreciate any help on this.
Thanks
Stuart
I want to create subscription for a report.
While creating it gives error "Operation is not valid due to the current state of the object".
I am able to create subscription for other reports deployed. But it gives error for subscription of a particular report.
Tried deploying the report with other name then too it does not allow me to create subscription.
I have a On_hand_Quantity report which has a parameter drop down to select about 200 stores.
When i run this report in BI studio , selecting all the 200 stores for the parameter it works fine.
But when i upload the same report to report manager and try selecting all the store_numbers it errors out saying 'operation cannot run due to current state of the object ' This report was running fine since the past 2 years, on 30th dec we did some .NET updates (KB2656356 and KB2656351) after which this report stopped working.
I tried troubleshooting all ways but it errors out only in report manager.
I'm using SQL Server 2012 Analysis services in Tabular mode and connected to Oracle Database and while importing, I'm getting below error after importing some rows.
OLE DB or ODBC error: Accessor is not a parameter accessor.. The current operation was cancelled because another operation in the transaction failed.
Hi all, i searched everywhere but couldn't find any info on the following error that i'm currently receiving:
"The conversation endpoint is not in a valid state for SEND. The current endpoint state is 'DI'."
I understand that this is due to some problem in my send/receive protocol but how do i fix this problem so that i can continue with my testing? Right now i'm forced to drop my entire test database and reinstall everytime this message shows up because i can't send/receive any messages at that point. Is there anyway to get rid of it?
Thanks in advance. This is driving me nuts.
Hi
I am new to SQL server and I have been trying hard to make a client computer to remote connect to a SQL express database on host computer
I have a VB6 application that can connect to SQL server database LOCALLY without problem:
Connection String is:
my_connection.ConnectionString = "Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=MyMushroom;Data Source=LAPTOPSQLEXPRESS"
I have followed instruction on enabling remote connection function from this blog:
http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
I then try to run the same app from the client computer, it gives me:
Login failed for user 'LAPTOPGuest'.
After looking up the web for solution, I found that I can test the connection from the HOST computer in this way:
C:Documents and Settingskit>sqlcmd -E -S laptopsqlexpress
1>
2>
The test is successful
Now I run the same command on the CLIENT computer
C:Documents and SettingsKit>sqlcmd -E -S laptopsqlexpress
Msg 18456, Level 14, State 1, Server LAPTOPSQLEXPRESS, Line 1
Login failed for user 'LAPTOPGuest'.
Now I can sure that from the client computer it cannot make a connection to it, then I look at the errorLog from my host computer
2006-08-13 21:41:00.34 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:41:00.34 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
2006-08-13 21:45:10.64 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:45:10.64 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
2006-08-13 21:48:41.80 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:48:41.80 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
Now I know it is actually Error: 18456, Severity: 14, State: 11.
From this site : http://blogs.msdn.com/sql_protocols/archive/2006/02/21/536201.aspx
11 and 12
Valid login but server access failure
It tells the connection string and SQL Express seem to be set up properly but the server access failed the remote connection
I have previously had SQL Server 2000 installed. I uninstalled SQL 2000 before I install SQL express but somehow the SQL Server Service Manager is still running at startup, and C:Program FilesMicrosoft SQL Server80 and its files are still exist after uninstallation..... Could this be a problem?
The Knowledge base suggestion on "enabling remote connection" is very simple and I do not understand why it is so difficult to me just to make a remote connection test work..... please, I need your help.
Recently, one of my clients began receiving this error. My team gave them sysadmin permissions, but this is terrible practice. I have read into disablying simple file sharing, but I don't even think I have the option to do it. I look in mycomputer > tools > view and don't see any option for this. Besides, the problem just started occuring recently, within the last week. The server is a cluster with veritas clustering and the edition is sql server 2000. Has anybody ever had a problem like this and have a good fix?
Thanks for any help in advance...
-Kyle
Let's have a table to show what I mean ...
As you can see I have added only one contract (for the sake of simplicity). At any given date I want to calculate the running total for a contract (all contracts), but the aggregation must take the contract state into consideration.
You can see my expected result for queries 1 - 3. That means, with the actual state ('B') I want to aggregate all values regardless of their state in the past.
For query 2 the state is 'A' ... I hope you can follow.
Now my aim is to aggregate all contract states for any given date with the right value. The past states of each contract are not relevant. And of course future ones (with respect to the query date) shall also be irrelevant.
Maybe the solution is a combination of 'LastNonEmpty' and SUM/PERIODSTODATE ...
Hi All,
I have enterprise version software CD1 and CD2 of SQL server 2005
when i try to run setup.exe..the following error pops -up
The image file Setup.exe is valid, but is for a machine type other than the current machine
MY OS version is windows 2003 32bit Operating system...
I am suspecting the binarie may be of 64bit.. How do we check the binaries are 32 bit and 64 bit software
Thanks for your Help
Mohan
I am accessing SQL2005 with C# code using OleDbConnection.
A try and catch block catches the following error once a while between the Open() and Close() of the connection:
ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.
I do not even have any idea where to start to debug this. The ExecuteNonQuery() runs a delete SQL query. It works 99.9% of the time. I do not see anything wrong when this error happens.
Any hint would be greatly appreciated.
The 2.0 version of ASPSTATE is slightly different than the 1.1 version in that one table has one additional column and another table uses a different data type and size for the key. The 2.0 version also has a couple additional stored procedures.
We'd like to manage just one session state database if possible so we're trying to figure out if Microsoft supports using the new schema for 1.1 session state access (it seems to work, but our testing has been very light).
Is there any official support line on this? If not, can anyone comment on whether or not you'd expect it to work and why?
Thanks.
I've this query
SELECT
t1.ID, t1.Date, t1.Time,
t1.VALUE
FROM RESULT WHERE t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101)
Let's say, current date is 8 AUG 2005 and current time is 2045
So, i will get
ID | Date (this is datetime) | Time (this is integer) | Value
--------------------------------------------------
204 | 8/1/2005| 2359 | 90
205 | 8/1/2005| 2250 | 99
206 | 8/1/2005| 1950 | 88
...
...
207 | 8/7/2005| 1845 | 77
208 | 8/7/2005| 2255 | 77
209 | 8/7/2005| 2140 | 77
Can someone can show me to filter data between
t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND TIME>=CurrentTime
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101) AND TIME<=CurrentTime
If current date is 8 AUG 2005 and current time is 2045, so the result shown as follow
ID | Date (this is datetime) | Time (this is integer) | Value
--------------------------------------------------
204 | 8/1/2005| 2359 | 90
205 | 8/1/2005| 2250 | 99
...
...
207 | 8/7/2005| 1845 | 77
I only have this query,
SELECT
t1.ID, t1.Date, t1.Time,
t1.VALUE
FROM RESULT WHERE t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101)
lack of idea to put the TIME condition.
Plz help me..
We have mirroring setup for 5 dbs, 4 of which are synchronized and 1 which is in "synchronizing" state on the principal and "restoring" state on the mirror. Mirroring for all dbs has been working fine for the past several months and we have a witness that has allowed automatic failover in the past without problems.
This database has several bulk inserts performed throughout the day and am sure there is some latency due to the size of these transactions.
Not sure as to why this is happening all of a sudden, but the db in question has been in this state for the past 12 hrs. I checked the mirroring status on the principal and it states that it is "synchronizing: data is being transferred from principal to mirror", but the mirror server states that db is in "restoring" state. Can anyone suggest as to how I can get the database on the mirroring server to get back to "mirror, synchronizing/restoring..." state? Or suggest on how I can troubleshoot this?
Thanks in advance.
Hi,
I'm making some sort of application where people can add their resume.
They also need something to add places where they have worked or currently are working.
I have a form where they can add this and i add this experience using the following stored procedure:
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_Insert_Experience]
@ExperienceId uniqueidentifier,
@ExperienceEmployee nvarchar(100),
@ExperienceFrom datetime,
@ExperienceUntil datetime,
@ExperienceQualifications nvarchar(250),
@ExperienceTechnologies nvarchar(250),
@ExperienceTasks nvarchar(250)
as
insert into Experiences
values(@ExperienceId,@ExperienceEmployee,@ExperienceFrom,@ExperienceUntil,@ExperienceQualifications,
@ExperienceTechnologies,@ExperienceTasks);
It must be possible to add the place where they currently are working. Then the ExperienceUntil has to be something like still going on. Then I decided that the user then had to set the current date.
But what I want is the following, I want that the ExperienceUntil keeps updating automatically, like everytime i get that record, it has to have current date.
Is this possible ?
But if the ExperienceUntil isn't the current date , it just had to take the supplied parameter date.
hello,everybody ,i use the AnalysisServicesExecuteDDLTask ,but it dap an error "DDL is not valid",i don't konw what is the problem and how to solve?thank you!
View 1 Replies View Relatedim doing a sum on a table and it either returns a number in decimal format or 'null' . The problem is when it returns null i want it to just make the text say '0.00'. So i did a test on the object that if it returns NULL just print '0.00' but if it is not null it tells me that there is a number there and i want to store that as a decimal and print it out. But i get an error for a type cast when im not it should not even be going to that part of the code. In the code below the first executescaler will return null so it should just go straight to the else. But it gives me the type cast error in the if that shouldnt be seen. The error and code are below. //Borrower NSF FEES
cmd.CommandText = "select sum(itemamount) from postmtdtls where loanid='" + LoanID + "' and Transactioncode = '310'";
object temp = cmd.ExecuteScalar();
if (temp != null)
{
decimal B_NSFFees = ((decimal)cmd.ExecuteScalar());
borrowerPayoff_NSFFees.Text = String.Format("{0:#,#.##}", B_NSFFees).ToString(); //Borrower NSF FEES
}
else
{
borrowerPayoff_NSFFees.Text = "0.00"; //borrowerPayoff_NSFFees.Text = "0.00";
} Server Error in '/WebSite5' Application. Specified cast is not valid. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Specified cast is not valid.Source Error: Line 774: if (temp != null)
Line 775: {
Line 776: decimal B_NSFFees = ((decimal)cmd.ExecuteScalar());
Line 777: borrowerPayoff_NSFFees.Text = String.Format("{0:#,#.##}", B_NSFFees).ToString(); //Borrower NSF FEES
Line 778: }Source File: c:ProgrammingFilesWebSite5InvestorPool.aspx.cs Line: 776 Stack Trace: [InvalidCastException: Specified cast is not valid.]
InvestorPool.GetLoanInfo(String LoanID) in c:ProgrammingFilesWebSite5InvestorPool.aspx.cs:776
InvestorPool.MortAccountText(Object sender, EventArgs e) in c:ProgrammingFilesWebSite5InvestorPool.aspx.cs:660
System.Web.UI.WebControls.TextBox.OnTextChanged(EventArgs e) +75
System.Web.UI.WebControls.TextBox.RaisePostDataChangedEvent() +124
System.Web.UI.WebControls.TextBox.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +7
System.Web.UI.Page.RaiseChangedEvents() +138
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4507
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
Hi,
I'm trying to install MSDE SP3 which I downloaded from MS at http://www.asp.net/msde/.
Following the instructions as best I can I unzipped the file into a Folder now called MSDE located on C: I then went to a command prompt and typed in the command given to start the install:
setup SAPWD=testsite SecurityMode=SQL
Hit enter and the installer started up and ran for a few secs and then came back with
The Instance named specified is invalid
There was no mention of including an instance name or the format for it.
Suggestions please?
Also, if I want to completly uninstall MSDE if I need to how would I do it?
Thanks,
Bob
Can't seem to find why I'm getting this error: Specified cast is not valid.
Ok, using a stored procedure for SQL Server 2000 and here is the main part of it:
SELECT id, rank, firstName, lastName, service, status, createdTime FROM accessRequest WHERE lastName LIKE @tLastName AND firstName LIKE @tFirstName
And the C# code behind from the class file:
SqlDataReader spResults;
conn.Open();
spResults = command.ExecuteReader();
while( spResults.Read() )
{
AccessRequestSearch request = new AccessRequestSearch( (int)spResults.GetInt32( 0 ), spResults.GetString( 2 ), spResults.GetString( 3 ), spResults.GetString( 1 ), spResults.GetString( 4 ), spResults.GetString( 5 ), Convert.ToDateTime(spResults.GetString( 6 )));
searchResults.Add( request ); // Add to Array List
}
spResults.Close();
The part in red is where I think it's happening because that is what I just added to the request. createdTime in the table is set as DateTime.
Can anyone see what I am missing here?
More info is available if needed.
Thanks,
Zath
Hello:
I am getting an error:
User id 12 is not a valid user in database Dest_db
While using Database object transfer.
Using mixed security on the source database.
copy data and replace existing data options are selected.
Is the following valid syntax? Thanks for your help!
IF (SELECT chargeID FROM inserted = 0) BEGIN
END
OR, should I be doing something like this:
DECLARE @thisChargeID as int
SET @thisChargeID = (SELECT chargeID FROM inserted)
IF (@thisChargeID = 0) BEGIN
END
I have a question regarding the backup to use in case of consistency errors.
I'm backing up my dbs daily and logs hourly with 'verify the integrity of the backup when completed' checked. Today I found out one of my tables has 1 page id error (dbcc checkdb message from yesterday), I'm wondering if I can use yesterday's full backup even if it's done after the dbcc, that way I don't have to apply a lot less log backups. In other words, does or does not the full backup inherit the corruption if it is done after consistency errors and the backup passes the integrity verification.
Thanks,
Markham
Version 1:--------------------------------If Condition = AUPDATE query 1UPDATE query 2ELSE IF Condition = BUPDATE queryVersion 2:--------------------------------If Condition = ABEGINUPDATE query 1UPDATE query 2ENDELSE IF Condition = BBEGINUPDATE queryENDOr are they functionally equivalent?Thanks
View 2 Replies View RelatedHi guys,
I'm having this really strange issue with mirroring.
I've followed the instructions on http://msdn2.microsoft.com/en-us/library/ms191140.aspx to the letter, leaving out the witness server part, as I don't have one.
All works OK, but when activating the mirroring on the principal server I get the usual error 1418 error. I fired up SQL Server Profiler to see what was happening, and the following error emerged.
Connection handshake failed. The certificate used by the peer is invalid due to the following reason: Certificate not yet valid. State 104.
Anyone have any ideas?
Hi,
I do not know what I did wrong. I tested a simple function in my custom code and get the error saying "Character is not valid". Any help is appreciated!
Here is the function inside my custom code.
Shared Function test() As string
Dim items As Fields
Return items("DataField1").Value;
End Function
I call the function in the body of my report using: Code.test()
and the error says "There is an error on line 18 of custom code: [BC30037] Character is not valid."
Thanks,
Tabbey
I get this error in a package which was executing previously. This is in SQLServer OLEDB DATASOURCE
Error at Membership_Other_Payer [DTS.Pipeline]: The index is not valid.
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0048004 (Microsoft.SqlServer.DTSPipelineWrap)
This error occurs when I try to open my existing Oledb datasource. I have added some columns in my database
Any body has solution for this?
sqlConnection1.Open();
System.Data.SqlClient.SqlDataReader Dil1;
Dil1 = sqlDilGetir.ExecuteReader();
ddlDil1.Items.Add(new ListItem("1. Dil", ""));
while (Dil1.Read())
{
ddlDil1.Items.Add(new ListItem(Dil1.GetString(1), Dil1.GetString(0)));
}
Dil1.Close();
sqlConnection1.Close();
I've build a website with asp.net and on my local machine it run very we. but when I store my website on a server, I have a error : ...error: 25 - Connection String not valid...
This is my connection string on my local machine : "add name="csIyp" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|iyapason.mdf;User Instance=true" providerName="System.Data.SqlClient" "
And the connection string on my webserver : "add name="csIyp" connectionString="data source= .MSSQLSERVER;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|iyapason.mdf;User Instance=true" providerName="System.Data.SqlClient" "
So, what can I do to solve this probleme.
Thanks !
GO
CREATE TABLE [dbo].[CmnLanguage]( [Id] [char](2) NOT NULL CONSTRAINT PkCmnLanguage_Id PRIMARY KEY, [UniqueName] [varchar](26) NOT NULL, [NativeName] [nvarchar](26) NOT NULL, [DirectionType] [smallint] NOT NULL, [IsVisible] [bit] NOT NULL, [CreatedDateTime] [datetime] NOT NULL DEFAULT GETDATE(), [ModifiedDateTime] [datetime] NULL)
GO
CREATE TABLE [dbo].[CmnLink]( [Id] [int] IDENTITY(1,1) NOT NULL CONSTRAINT PkCmnLink_Id PRIMARY KEY, [UniqueName] [varchar](52) NOT NULL, [IsVisible] [bit] NOT NULL, [CreatedDateTime] [datetime] NOT NULL DEFAULT GETDATE(), [ModifiedDateTime] [datetime] NULL)
GO
CREATE TABLE [dbo].[CmnLinkCmnLanguage]( [LinkId] [int] NOT NULL CONSTRAINT FkCmnLinkCmnLanguage_LinkId FOREIGN KEY (LinkId) REFERENCES CmnLink(Id) ON DELETE CASCADE, [LanguageId] [char](2) NOT NULL CONSTRAINT FkCmnLinkCmnLanguage_LanguageId FOREIGN KEY (LanguageId) REFERENCES CmnLanguage(Id) ON UPDATE CASCADE ON DELETE CASCADE, [CreatedDateTime] [datetime] NOT NULL DEFAULT GETDATE(), [ModifiedDateTime] [datetime] NULL)
what i want to achive is the proc sh'd return a master-detail value in one go.
master value should be returned with Out Parameter and detail value as a recordset.
will it return the recordset of detail table as below....
Create Procedure ProductDetail
(
@ProductID int,
@ProductCode varchar(15) OUTPUT,
@ProductName varchar(60) OUTPUT,
@CategoryID int OUTPUT,
@CategoryName varchar(60) OUTPUT,
@Image1 varchar(256) OUTPUT,
@Image2 varchar(256) OUTPUT,
@UnitPrice smallmoney OUTPUT,
@UOMValue numeric(9) OUTPUT,
@UOMName varchar(10) OUTPUT,
@ShippingWeight numeric(9) OUTPUT,
@Directions varchar(1500) OUTPUT,
@Ingrediants varchar(1500) OUTPUT,
@Warnings varchar(1500) OUTPUT,
@ShortDescription varchar(1000) OUTPUT,
@LongDescription varchar(2000) OUTPUT,
@NutritionFacts varchar(1000) OUTPUT,
@SearchKeywords varchar(500) OUTPUT,
@IsTaxable varchar(15) OUTPUT,
@CreatedBy varchar(60) OUTPUT,
@CreatedOn varchar(15) OUTPUT,
@UpdatedBy varchar(60) OUTPUT,
@UpdatedOn varchar(15) OUTPUT,
@Status int OUTPUT
)
AS
SELECT
@ProductCode = ProductCode,
@ProductName = ProductName,
@CategoryID = CategoryID,
@CategoryName = (select CategoryName from mCategory where CategoryID=a.CategoryID),
@Image1 = isnull(Image1,''),
@Image2 = isnull(Image1,''),
@UnitPrice = isnull(UnitPrice,0),
@UOMValue = isnull(UOMValue,0),
@UOMName = isnull(UOMName,''),
@ShippingWeight = isnull(ShippingWeight,0),
@Directions = isnull(Directions,''),
@Ingrediants = isnull(Ingrediants,''),
@Warnings = isnull(Warnings,''),
@ShortDescription = isnull(ShortDesc,''),
@LongDescription = isnull(LongDesc,''),
@NutritionFacts = isnull(NutritionFacts,''),
@SearchKeywords = isnull(SearchKeywords,''),
@IsTaxable = case when isnull(IsTaxable,0)=0 then 'No' else 'Yes' End,
@CreatedBy = isnull((select LName + ',' + FName from mUser where UserID=InsertedBy),''),
@CreatedOn = InsertedOn,
@UpdatedBy = isnull((select LName + ',' + FName from mUser where UserID=UpdatedBy),''),
@UpdatedOn = UpdatedOn,
@Status = Convert(int,isnull(Status,0))
FROM
mProduct a
WHERE
ProductID = @ProductID
SELECT
ID as PricingDetailID,
isnull(PricingFromQnty,0) as PricingFromQnty,
isnull(PricingToQnty,0) as PricingToQnty,
isnull(RangePrice,0) as RangePrice,
Convert(int,isnull(Status,0))as Status
FROM
dProduct
WHERE
ProductID = @CategoryID
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
Regards,
Bhairav
Here's my code: Dim Cmd as New SQLCommand(sqlString, conn) cmd.CommandType=CommandType.StoredProcedure Breaks Here ----->>cmd.parameters.add(New SQLParameter(@OrdAlias, OrdNum)) cmd.parameters.add(New SQLParameter(@AliasSourceCode, 4))The error says:compilation error - - then, on the line that is in red:Compiler Error Message: BC30037: Character is not valid.I have 'OrdNum' declared globally, and OrdNum is assigned right away in the Page_Load event. I've checked the spelling of the SQL parameters (OrdAlias is a varchar, and AliasSourceCode is a tinyInt)After all this - then, this code runsAny ideas why I'm getting this error??
View 1 Replies View Relatedall schedulled task on server failed for 18450 Process Exit Code 1. ...t Utility, Version 6.50.240 Copyright (C) Microsoft Corporation, 1995 - 1996 [Microsoft SQL-DMO] Error 18450: [SQL Server] Login failed- User: sqlexec Reason: Not defined as a valid user of a trusted SQL Server connection.
Any information on how to solve it