I have scheduled a daily db backup (i.e. dump database) and it has been running successfully for the last couple of months.
However I have the following message this morning :
Operator aborted dump or load. (Message 3204)
For the transaction dump (which has been running fine too),
the following message appears :
DUMP TRANsaction is not allowed while the trunc. log on chkpt. option is enabled: use DUMP DATABASE, or disable the option with sp_dboption. (Message 4208)
I have done a dump transaction with truncate_only and re-do the dump database. However the same error msg still occurs.
For restoring a SQL Server 6.5 backup is it necessary to know information about the database being backed up like devices used, space on each device etc.?
I have tried restoring from backups without recreating the device structure for original database and it works (atleast for simple cases) but documentation says that device structure needs to be re-created.
Using SQL Enterprise Manager on a ver 6.5 system we get error message 3101 when trying to restore a database using the 'restore from device' option. The error says 'Database in use. System Administrator must have exclusive use of database to run load.'. The dbo does have exclusive use. There is no one else in the database, and there are no open transactions in the db. DBCC checks also indicate no errors in the db. We need to restart SQL server to be able to load the dump. NT Perfmon is running on the server monitoring SQL objects, but even shutting this does not allow the load to proceed. Does anyone have any suggestions?
I'm trying to capture the info that gets passed back from the 'load headeronly from logbackup' command in a script that I'm writing. The MS Transact-SQL reference specifies that this info is passed back in a table, a row for each dump on the given dump device. I'm looking for the SQL construct that will allow me to capture this info as variables in my script for processing. I've tried to create a temp table that mirrors the info returned and insert into this table by executing the load command but syntactically it is not correct(with that syntax the compiler assumes that the load command is a stored procedure and can't locate it) Specifically, I'm trying to capture info from the dump transaction with no_truncate command. It appears the dump info does not go the the msdb..sysbackuphistory table when the no_truncate option is used. This dump info can only be obtained thru the load headeronly command. Any thoughts on how to code the sql to capture this info?
Hi there. I apologize if this topic had already been covered. I'mtrying to find out whether I can load up a data dump files, generatedoff of a 64bit SQL server on Itanium, to a 32bit MSSQL 2K server. Ifanyone has tried this before, please let me know your findings. Thankyou very much in advance folks.j
I receive the following errors while browsing the http://server/reports page.Please help me to resolve the issue.
Error1.
Thread was being aborted. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Threading.ThreadAbortException: Thread was being aborted. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [ThreadAbortException: Thread was being aborted.] System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +483 System.Web.HttpApplication.ResumeSteps(Exception error) +539 System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +144 System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +300
Error2.
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) (rsRPCError) Get Online Help Bad Data. (Exception from HRESULT: 0x80090005)
AppDomain 446 (A.dbo[runtime].477) unloaded. AppDomain 446 (A.dbo[runtime].477) is marked for unload due to memory pressure. Error: 6532, Severity: 16, State: 48. .NET Framework execution was aborted by escalation policy because of out of memory. Im getting this problem on server A? when I restore a backup that is located on a drive on server A? to server B?. The drive isnt actually on server A? it is on an EMC but is mapped to server A?. So, I guess server A? is acting as a file server for the file. Server A? is an x64 bit server with 32 GB of Ram. It has SQL 2005 Enterprise Edition build 9.00.3042.00. Min Memory is set to 2 GB and Max is set to 28 GB. SQL service is running under a windows account with Lock pages in Memory? set. From what Ive read this was a problem but I thought SP2 fixed it. Any ideas? Thanks.
I have a SQL CLR used to read a XML file, it works fine when the file is smaller, but will give me this error if the file if bigger i.e. more than 10M.
Msg 6532, Level 16, State 49, Line 2
.NET Framework execution was aborted by escalation policy because of out of memory.
System.InvalidOperationException: Data access is not allowed in this context. Either the context is a function or method not marked with DataAccessKind.Read or SystemDataAccessKind.Read, is a callback to obtain data from FillRow method of a Table Valued Function, or is a UDT validation method.
System.InvalidOperationException:
at System.Data.SqlServer.Internal.ClrLevelContext.CheckSqlAccessReturnCode(SqlAccessApiReturnCode eRc)
at System.Data.SqlServer.Internal.ClrLevelContext.GetDatabase(SmiEventSink sink, Int32* pcbLen, IntPtr* ppwsName)
at Microsoft.SqlServer.Server.InProcConnection.GetCurrentDatabase(SmiEventSink eventSink)
at System.Data.SqlClient.SqlInternalConnectionSmi.Activate()
at System.Data.SqlClient.SqlConnectionFactory.GetContextConnection(SqlConnectionString options, Object providerInfo, DbConnection owningConnection)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at BuildDirect.SQLCLR.CLRErrorHandler.RaiseNewCLRError(Int32 errorid, String errormsg)
at BuildDirect.SQLCLR.CLRErrorHandler.ReportCLRError(String location, String errormsg)
at BuildDirect.SQLCLR.CLRErrorHandler.ReportCLRError(String location, Exception ex)
at BuildDirect.SQLCLR.HTTPRequest.uCLRGetHTTPResponse(String url)
I'm working on a large scale project that is currently in production. We have a big process that recently changed to use In-Memory Tables with SQL 2014 for performance efficiency.
The Process uses:
51 In-Memory SQL Tables. 50 Stored Procedures (not native) that loads data(Insert) from about 150 regular Tables and IM tables. 300 Validations (short stored procedure not native) Selecting from those 50 In-Memory Tables (And insert to In-Memory table that save the validation errors if exists on In-Memory table).
At the end of this process we clean the table from the data that relavnt to etch prosses(DELETE FROM WHERE)
B.T.W No UPDATE STAT on In-Memory are used-when we test the prosses it slow as down and cause some locks.
We are calling this process from ADO.Net, loads stored procedure first and then validations, each SP use different SQL Connection. In normal use, everything works fine and takes about 1.5 second.
Under stress test (6 Clients X 100 Tasks) for 30 minutes. After several minutes we are starting to get this SQL Exception (1 SQL Exception for every 20 tasks):
41301. A previous transaction that the current transaction took a dependency on has aborted, and the current transaction can no longer commit.
Transactions in Memory-Optimized Tables
The Exception is not clear. We are not using BEGIN TRANSACTION in the process. The SQL Exception occurs in different stored procedures each time.
Here I will describe my problem. 1. We are loading large amount of data from database on background thread which is starting on Application_start event in global.aspx.cs file.The data is later cached for subsquent request to improve the performance. 2. Now when we put the application on web farm garden, it is not able to load the application. 3. We are sending the request the servers through Router kind of application. 4 This application is working fine on single server enviornment.
I just have done the SSIS example in the tutorial document included when install SQL 2005 ENT. I have a problem that whenever I test to run, the service load all data from source with out noticing about the data (I mean it load all the data to the destination), I do it several time and it continue to load all without checking. That mean the data is dublicated when the schedule run???
I think there should be a paramete or something like that to help the engine just load the new data to the destination. Could you help please?
Hi, I have added a new SQL Server database to my project and I was wondering how to do generate a SQL dump of the database, tables, and queries? I couldn't find any utilities in Visual Studio 2008 Pro. I also couldn't figure out how to create indexes using VS. Thanks!
1. I need to create a replication enviroment. In that i want to snapshot the database as and when i want from my Java program, so that selective tables are updated with latest data. Is there anyway i can do with out creating native replication methods.
2. Is there any way with out creating a snapshot or replication. I need to copy the data from my master database to child database(my reporting database) with out straining much my master database
I get the following error when doing a dump on a 6.5 database. *** Page '697569' of database 'FOREX_UPLOAD' in the database has the PG_DMPTRLR bit set. Page '698121' of database 'FOREX_UPLOAD' in the database has the PG_DMPTRLR bit set. Page '698233' of database 'FOREX_UPLOAD' in the database has the PG_DMPTRLR bit set. *** I have run SP5 as suggested,and can see that more of the db has been dumped than before but still I get the error I get no errors when doing dbcc's. Any ideas???
When I use "DUMP DATABASE", it will help me to backup both database and transaction log. However, it will not help me to clean up the transaction log. Therefore, I am worry that will the following happen?
1. DUMP DATABASE Start backup database ( there are transactions during the backup process ) Finish backup database Start backup transaction Finish backup transaction
2. DUMP TRANSACTION Start backup transaction and clean up the transaction log
So, will the transactions been backuped twice? If yes, will it cause those transaction do twice when I restore the database then restore the transaction?
I need to dump transaction log every night. Before I do that I'd like to check those open transactions and kill the ones not part of sa or SQL server dba's activity. How can I achieve this?
After Dumping a database device, I still find the xxx.DAT files inthe /Data directory. Can these be 'safely' removed/backed up ? They are taking up WAY too much space.
Question 2: After installation and after creating devices & databases, is there any way to reassign the /Data directory on another drive? Either for future devices/databases or existing?
I understand from the beta sql 7 newsgroups that 7 can't restore a 6.5 dump. This is extremely frustrating that MS wouldn't put this type of backword compatibility into 7.
Has anyone found another way to accomplish this? I can't use transfer manager as the 2 servers are on seperate, non-connected boxes. I ftp'd the dump from 6.5 server to a middle-man machine, then copied it to the 7.0 server.
Am I looking at bcp'ing out all 203 tables in my 1GB db then bcp'ing them back in?
Is there a way to dump sql in Access like in Transact SQL or mysqldump? I've gotta convert an Access Database into a MySQL database, it is a small database, but I'd not want to put it in by hand .
If not, I'll just make a PHP script to rip it from a textfile.
I am trying to import a database from a dump file. The dump file is from a sql server db.
I have created the db on another server and want to import the data from the dump file.
I use the bcp like this :
bcp nnfdb.sa.users in x -Usa -P
nnfdb is the name of the database users is the name of a table x is the name of the dump file.
But I get this error : SQLState = S0002, NativeError = 208 Error = [Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'nnfdb.sa.users'.
also I am sure if I have to run the bcp for each table or if I can import all tables in one bcp run.
****************************************************************************** * * BEGIN STACK DUMP: * 04/25/07 08:32:19 spid 22 * * Exception Address = 00412373 (CTableIsolation::FNeedLockClass + 14) * Exception Code = c0000005 E * Access Violation occurred reading address 00000014 * Input Buffer 132 bytes - * S E L E C T S u p F r o m , S u p T o F R O M S u p p o r t P r * o f i l e s w h e r e S u p P r o f i l e = 3 0 4 5 * * * MODULE BASE END SIZE * sqlservr 00400000 008d2fff 004d3000 * ntdll 77f60000 77fbefff 0005f000 * KERNEL32 77f00000 77f5efff 0005f000 * ADVAPI32 77dc0000 77dfefff 0003f000 * USER32 77e70000 77ec1fff 00052000 * GDI32 78140000 78174fff 00035000 * RPCRT4 77e10000 77e66fff 00057000 * ole32 77b20000 77bd0fff 000b1000 * OLEAUT32 65340000 653dafff 0009b000 * VERSION 77a90000 77a9afff 0000b000 * SHELL32 77c40000 77d7afff 0013b000 * COMCTL32 71710000 71793fff 00084000 * LZ32 779c0000 779c7fff 00008000 * opends60 41060000 41085fff 00026000 * ums 41090000 4109cfff 0000d000 * MSVCRT 78000000 78045fff 00046000 * sqlsort 04000000 0408efff 0008f000 * MSVCIRT 780a0000 780b1fff 00012000 * sqlevn70 410a0000 410a6fff 00007000 * rpcltc1 77bf0000 77bf6fff 00007000 * COMNEVNT 410b0000 410fefff 0004f000 * ODBC32 1f7d0000 1f803fff 00034000 * comdlg32 77d80000 77db1fff 00032000 * SQLWOA 41100000 4110bfff 0000c000 * odbcint 1f8c0000 1f8d5fff 00016000 * NDDEAPI 75a80000 75a86fff 00007000 * WINSPOOL 77c00000 77c17fff 00018000 * SQLTrace 41130000 4117dfff 0004e000 * NETAPI32 4ca00000 4ca40fff 00041000 * NETRAP 77840000 77848fff 00009000 * SAMLIB 777e0000 777ecfff 0000d000 * WSOCK32 776d0000 776d7fff 00008000 * WS2_32 776b0000 776c3fff 00014000 * WS2HELP 776a0000 776a6fff 00007000 * WLDAP32 77950000 77978fff 00029000 * SQLFTQRY 41020000 4103afff 0001b000 * SSNMPN70 41190000 41195fff 00006000 * SSMSSO70 411a0000 411aafff 0000b000 * SSMSRP70 411b0000 411b7fff 00008000 * ENUDTC 74e20000 74e36fff 00017000 * XOLEHLP 74e40000 74e48fff 00009000 * MTXCLU 74e50000 74e5cfff 0000d000 * ADME 74e60000 74e72fff 00013000 * DTCUtil 74e80000 74e89fff 0000a000 * DTCTRACE 74e90000 74e96fff 00007000 * CLUSAPI 7f230000 7f23cfff 0000d000 * RESUTILS 7f250000 7f259fff 0000a000 * MSDTCPRX 74ea0000 74ed0fff 00031000 * DTCCM 74ee0000 74efdfff 0001e000 * msafd 77660000 7766efff 0000f000 * wshtcpip 77690000 77698fff 00009000 * rpclts1 77e00000 77e05fff 00006000 * RpcLtScm 755b0000 755bafff 0000b000 * MSWSOCK 77670000 77684fff 00015000 * rnr20 75600000 7560dfff 0000e000 * RpcLtCcm 756d0000 756defff 0000f000 * security 76e70000 76e81fff 00012000 * msapsspc 756e0000 756f3fff 00014000 * MSVCRT40 779d0000 779e4fff 00015000 * schannel 77400000 7741dfff 0001e000 * MSOSS 75710000 75734fff 00025000 * CRYPT32 75740000 757b4fff 00075000 * MSASN1 757c0000 757cffff 00010000 * msnsspc 757d0000 757eefff 0001f000 * digest 757f0000 757fffff 00010000 * SQLRGSTR 01b60000 01b64fff 00005000 * xpsqlbot 01bf0000 01bf5fff 00006000 * sqlboot 01c00000 01c07fff 00008000 * EntApi 0a000000 0a011fff 00012000 * PSAPI 76bf0000 76bfafff 0000b000 * WININET 01db0000 01e45fff 00096000 * SHLWAPI 01e50000 01eb8fff 00069000 * xpstar 02440000 02470fff 00031000 * SQLWID 02480000 02485fff 00006000 * SQLSVC 02490000 024a8fff 00019000 * odbcbcp 024b0000 024b5fff 00006000 * SQLRESLD 024c0000 024c5fff 00006000 * W95SCM 024d0000 024d7fff 00008000 * SQLSVC 024e0000 024e5fff 00006000 * sqlimage 02590000 025bcfff 0002d000 * * Edi: 00100C70: 000a0100 00030008 00000000 00000000 00100e70 00100e50 * Esi: 00000000: * Eax: 00000000: * Ebx: 00000004: * Ecx: 00000000: * Edx: 00000004: * Eip: 00412373: 007ea6e2 05f61577 01f88318 468b0013 d49f850f 00147e83 * Ebp: 01C8F864: 00000001 00000000 2149a1e4 00000000 00412336 01c8f898 * SegCs: 0000001B: * EFlags: 00010246: 003d0052 00490044 005f004c 00410043 004f004c 005f0053 * Esp: 01C8F854: 00412336 01c8f898 00000000 00000004 2149a1e4 00000000 * SegSs: 00000023: *******************************************************************************
SqlDumpExceptionHandler: Process 22 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
Using 'sqlimage.dll' version '4.0.5' Stack Dump being sent to C:MSSQL7logSQL00026.dmp
Sunrise406, creation date and time: 2001/11/16(14:34:00), first LSN: 647599:6555:1, last LSN: 647633:8427:1, striped: 0, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQL7BACKUPSunrise406_tlog_200704250000.TRN'}).
Using 'xpstar.dll' version '2000.28.09' to execute extended stored procedure 'xp_regread'.
Database backed up with following information: Database: Sunrise406, creation date and time: 2001/11/16(14:34:00), pages dumped: 47456, first LSN: 647633:8425:1, last LSN: 647633:8427:1, sort order: 52, striped: 0, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQL7ackupSunriseDailyBackup9pm'}).
I have a sql 2000 database on my local machine that I need to get to a faraway server so he can make one like it on his server. The admin tells me Ineed to make a dump of it and send it to him. I just don't know how to dothat. Can someone help me out?Thanks,Jerry
Tried googling, but I guess I have the wrong terminology for MSproducts.Using PostgreSQL, or MySQL, if I wanted to tranfer a database from onemachine to another, I'd do a "dump" with a single command, such as:mysqldump [databasename] > [path/filename]Then I'd take the file generated and dump it back onto a new machine.What's the process with MS SQL Server? Can someone point me in theright direction to a webpage dealing with this?--[ Sugapablo ][ http://www.sugapablo.com <--music ][ http://www.sugapablo.net <--personal ][ Join Bytes! <--jabber IM ]
I am having problems and cant seem to get a grip as to what is happening. My dump files are filing up fast and I have to go and delete them because they take up too much space.
We started playing with SharePoint 2007 search and think it is the culprit.
Any advise would be great.
Here is a little info form the dump file
BugCheck Dump ===================================================================== This file is generated by Microsoft SQL Server version 9.00.1399.06 upon detection of fatal unexpected error. Please return this file, the query or program that produced the bugcheck, the database and the error log, and any other pertinent information with a Service Request. Computer type is AT/AT COMPATIBLE. Bios Version is DELL - 1 Phoenix ROM BIOS PLUS Version 1.10 A04 Current time is 15:10:02 04/24/07. 4 Intel x86 level 15, 3400 Mhz processor (s). Windows NT 5.2 Build 3790 CSD Service Pack 1. Memory MemoryLoad = 57% Total Physical = 4095 MB Available Physical = 1741 MB Total Page File = 5976 MB Available Page File = 3709 MB Total Virtual = 2047 MB Available Virtual = 290 MB ***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump6891.txt SqlDumpExceptionHandler: Process 100 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
I need to make a gigantic collection of excel sheets searchable from a web interface.I need entire rows fetched into a webpage depending on the users query.Mind you I'm not searching the names (filenames) of these excel files, butthe contents inside the excel file. E.g. in a file test.xls, if I search for the word"test1" from the web interface, the entire row in the excel file containingthe word test1 should be displayed.One way out is to dump the contents of the excel sheets into a database, andsearch the database via ASP.For this, can anyone tell me how to efficiently dump the contents of an excelsheet into SQL server?Or if anyone can suggest an alternate strategy for searching this mammothcollection of excel files' contents, if would be great.Thanks a lot.
I would like to export the database(with table schema and existing data). My database is a mdf file and i know that SQL Server 2005 Express Edition cannot do this. I would like to know if there are any FREE tools can export the table schema and existing data to a .sql file. OR SQL Server 2005 can do this? Thank you
