Oracle Connection Trouble
Oct 19, 2007
Hi,
I'm trying to get some developers going with ssis on their desktops running
XP sp 2
Microsoft SQL Server Integration Services Designer
Version 9.00.3042.00
Oracle client drivers 9.2.0.1.0
Oracle Enterprise 8.1.7.4.0 and 9.2.0.1.0
I have the same setup on my machine and it's working fine. I duplicated steps I used to get data on the develoeper machine and got these errors.
Code Block
Pre-Execute
Execute phase is beginning.
Execute phase is beginning.
PrimeOutput will be called on a component. : 1 : OLE DB Source
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01403: no data found".
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01403: no data found".
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
I'm at a loss of where to go next and I need to get these guys rolling!
Next step is to reinstall drivers...but I'm doubting that is going to have any effect.
Thanks for any help
View 9 Replies
ADVERTISEMENT
Jan 11, 2007
Hi--
I am running SQL Server 2005 on Win2k3:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 6.0.3790.1830
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790
I have the OraOLEDB.Oracle provider installed to the (C:oraclexe) directory.
I am having problems querying from linked oracle server. When i setup oracle as a linked server and purposely enter an incorrect password the query i run tells me i have an incorrect password. So it at least knows that. when i set the correct password and run a query I get this error:
(i replaced the real server name with "someServer".)
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer".
This is how I set up my Linked server:
Provider: "Oracle Provider for OLE DB"
Product Name: SomeServer
Data Source: SomeServer
Provider String: "Provider=OraOLEDB.Oracle;Data Source=SomeServer;User Id=MyLogin;Password=MyPassword"
The query I run is:
Select * from [Someserver].[schema or database]..[tbl_name]
Any help??? What am i missing?
View 3 Replies
View Related
Aug 11, 2005
I'm currently trying to establish a linked server to an Oracledatabase.Setup:Connecting to 8x version of OracleUsing 9i client tools (Net Manager)SQL-Server 2000Windows 2000I installed the Oracle 9i client tools, and set up a Service for theOracle connection. Testing from the 9i client produces a successfullconnection.I then opened SQL-Server and created a new Linked Server with thefollowing setup:Name - PYR_LinkProvider - Microsoft OLE DB Provider for OracleProduct Name - PYRData Source - PYR (9i Service Name)Provider string - MSDAORAI get the unspecific 7399 error that OLE DB provider MSDAORA reportedan error, trace 'Initialize returned 0x80004005'I've searched through the archives, checked all of the relevantMicrosoft articles I could find, and still have no idea what is wrong.SQL-Server reports that the provider is registered in the system, but Ican't figure out what I'm missing.Help or a guide for troubleshooting would be much appreciated.Tim
View 2 Replies
View Related
Feb 22, 2006
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
View 17 Replies
View Related
Jul 24, 2006
Using Vs2005 sqlServer 2005 When i try to connect i get this error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Connection string: <connectionStrings> <add name="pubsConnectionString1" connectionString="Data Source=.;Initial Catalog=pubs;User=mk;pw=x" providerName="System.Data.SqlClient" /> </connectionStrings> Calling code : try { using (SqlConnection cn = new SqlConnection(WebConfigurationManager.ConnectionStrings[0].ConnectionString)) { cn.Open(); } } catch (Exception ex) { Response.Write(ex.Message); }
View 1 Replies
View Related
Nov 21, 2007
Hello all,
I'm still having trouble connecting to SQL Server Express from a remote machine.
I read this article
http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
and followed all of its steps. Remote access is enabled through TCP/IP and VIA. The ports are listening when I check netstat -a and netstat -abn on the server computer.
However, my client program still can't connect to the server.
Here is my connection string:
"Data Source=MACHINENAMESQLEXPRESS;AttachDbFilename=C:DatabaseDatabase.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True;Asynchronous Processing=true"
With this connection string, I can connect to the DB only on the server machine.
I've read something about the User Instance part of the string, but nothing really conclusive. All I know is when I have set it to false, I can't connect to the DB on the server machine either.
Not sure where to go from here...
View 10 Replies
View Related
Sep 29, 2006
I am trying to connect to SQL Server Express using the following VB code from an aspx.vb page: ' Create and open a connection to the database
Dim conn As New SqlConnection("Data Source=YOUR-FE632222CE\SQLEXPRESS;Initial Catalog=scotfree;Integrated Security=SSPI")
conn.Open()
This code fails on conn.Open() however giving me the following exception:System.InvalidOperationException: Instance failure.Stack trace:[InvalidOperationException: Instance failure.] System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +1804 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +606 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +193 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +501 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +429 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +70 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +512 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +85 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +89 System.Data.SqlClient.SqlConnection.Open() +160 Default3.OnLoad(EventArgs e) in C:Documents and SettingsLiamMy DocumentsVisual Studio 2005WebSitesTestDefault3.aspx.vb:15 System.Web.UI.Control.LoadRecursive() +49 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743The strange thing is that I replicated the code in C# and it works fine. Any ideas.
View 1 Replies
View Related
Apr 4, 2006
I'm developing an intranet site in ASP.NET 2.0 but I can't seem to connect to the DB from within my code. I've created a .vb class that houses a private Connection() that other functions within the class can call to connect to the database. In the calling function, I've declared my connection object and called the "Open" method on the object. However, when I attempt to execute the stored procedure command by calling the "ExecuteScalar" method, I get the following error:
"ExecuteScalar requires an open and available Connection. The connection's current state is closed."
Here's the code from my class:
Imports System.Data
Imports System.Data.SqlClient
Namespace Encompass
Public Class EncompassSecurity
Public Shared Function GetHRIDByNTUserID(ByVal strNTUserID) As String
Dim strHRID As String
'Create command object
Dim cmd As New SqlCommand("usp_Get_HRID_By_NTUserID", Connection())
cmd.CommandType = CommandType.StoredProcedure
'Open DB connection
Dim DBConnection As SqlConnection = Connection()
DBConnection.Open()
'Input parameters
Dim inNTUserParam As New SqlParameter("@NT_UserID", SqlDbType.VarChar)
inNTUserParam.Direction = ParameterDirection.Input
inNTUserParam.Value = strNTUserID
cmd.Parameters.Add(inNTUserParam)
'Output parameters
Dim outHRIDParam As New SqlParameter("@HRID", SqlDbType.Int)
outHRIDParam.Direction = ParameterDirection.Output
cmd.Parameters.Add(outHRIDParam)
'Run stored procedure
strHRID = cmd.ExecuteScalar()
Return (strHRID)
'Close DB connection
DBConnection.Close()
End Function
Private Shared Function Connection() As SqlConnection
Dim strConnectionString As String
strConnectionString = ConfigurationManager.ConnectionStrings("Conn").ConnectionString
Return New SqlConnection(strConnectionString)
End Function
End Class
End Namespace
Here's the code from my web.config file:
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
-->
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<connectionStrings>
<add name="Conn" connectionString="Data Source=ServerName;Initial Catalog=NPASDV;uid=UserName;password=*******;"
providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.
-->
<roleManager defaultProvider="AspNetWindowsTokenRoleProvider" />
<compilation debug="true" strict="false" explicit="true" />
<pages>
<namespaces>
<clear />
<add namespace="System" />
<add namespace="System.Collections" />
<add namespace="System.Collections.Specialized" />
<add namespace="System.Configuration" />
<add namespace="System.Text" />
<add namespace="System.Text.RegularExpressions" />
<add namespace="System.Web" />
<add namespace="System.Web.Caching" />
<add namespace="System.Web.SessionState" />
<add namespace="System.Web.Security" />
<add namespace="System.Web.Profile" />
<add namespace="System.Web.UI" />
<add namespace="System.Web.UI.WebControls" />
<add namespace="System.Web.UI.WebControls.WebParts" />
<add namespace="System.Web.UI.HtmlControls" />
</namespaces>
</pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows" />
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
What am I doing wrong? Any help would be most appreciated!!
Manuel
View 1 Replies
View Related
Sep 12, 2007
Hi all,
I followed an excellent tutorial (from Microsoft) about creating and using a SQLExpress db table internal to your website and the site I created works just fine - locally. When I publish to my web host provider I get this error:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
My web host provider supports .NET 2.0 but doesn't support MS SQL Server. But that should matter - right? Because I'm putting the db instance right in the website?
I did a search and followed some of the advice:
I went into the SQL Server Surface Area Config Mgr and set SQLExpress for local and remote connections and rebooted/republished. I also have SQL Server 2005 installed as a separate entity (if that makes a difference).
I still get the above error. This is the connection string from the web.config:
<connectionStrings>
<add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Customers.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>
</connectionStrings>
And this is the call from the markup:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT * FROM [Customer]"></asp:SqlDataSource>
Does any know the fix for this?
Thanking you in advance
Pat
View 3 Replies
View Related
Oct 29, 2004
Well here is my connection string, I used these details to succesfully access the server from mySQL gui.
SqlConnection shhfd = new SqlConnection ("Data Source=http://www.mydomain.co.uk; " +
"user id=mteccles; password=mypass; connection timeout=30; "
then... try { shhfd.Open(); blah blah blah.
The exception caught is as follows.
at System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) at System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) at System.Data.SqlClient.SqlConnection.Open() at WebService1.Service1.HelloWorld() in g:inetpubwwwrootwebservice1service1.asmx.cs:line 120
My guess is that something in the web.config isn't right or maybe the host (webfusion) is strange. Thanks if anyone can help.
View 2 Replies
View Related
Apr 26, 2006
Here is the way SQL Server 2005 Express is currently setup:
SQL server has IP of 192.168.8.200. (DMZ zone - 192.168.8.*)
Web server has IP of 192.168.8.81. (DMZ zone - 192.168.8.*)
My workstation has IP of 192.168.1.100. (Trusted zone - 192.168.1.*)
So, I've been developing a web application that was stored in the trusted zone, and this application didn't have any problem connecting to the database on *.8.200. I even have SMSE running and I can manage the database without any connection problems. I moved the web application to the web server, without changing the web.config file, and now it will not connect from the webserver.
In the web.config file, the connection string is pointed to 192.168.8.200SQLEXPRESS. I'm confused because it seems that since the SQL server and the Web server are in the same zone, there shouldn't be any connection problem.
In the Firewall, I have port 1433 open for TCP/UDP for ANY -> ANY...so I think the firewall is configured correctly?
Please advise! Thanks!
View 3 Replies
View Related
Sep 10, 2007
hello. after deployment my SSIS code to a different server - I get the following error:
"The file name "C:\Documents and Settings\Administrator\Desktop\filename.txt" specified in the connection was not valid.
"
This is a flat file connection - and the file does in fact exist - but the difference is that I'm running the DTS package under a different account.
I would like to set the flat file connection to run under a different account - can I do that? Is that the "Creator" property?
View 1 Replies
View Related
Oct 1, 2001
I need a way to connect to an Oracle database and pull the information from that database into a Sql Server Database. An Oracle gateway is not an option.
Is there a way to set up an odbc connection to connect to the database or is there another way to connect?
Thank you,
Anita Ossowski
View 3 Replies
View Related
Dec 14, 2007
I've created a SQL stored procedure and would like to connect to an Oracle database & query results within the procedure. Is this possible?
View 1 Replies
View Related
May 19, 2008
I am moving dta afrom an Oracle source to SQL serevr 2005 using SSIS
Used: Provider: Microsoft OLE DDDB provider for Oracle and typed in Server and username with password.
When executed the package with defaul settimngs( Package ProtectionLevel: EncrptSensitiveWith userkey OR DONTSAVESENSITIVE, EncrptAllwithPassword) and Isolationlevel: serializable/ read comitted) the package responded fine.
When I try to do 'Package Configuration' and type in password in config file the package doesn't responds. it gives following error.
TITLE: Microsoft Visual Studio
------------------------------
Error at Package2 [Connection manager "DEV04.XYZ"]: An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error at Data Flow Task [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "DEV04.XYZ" failed with error code 0xC0202009.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
I also get this error:
Executed as user: XYZUHSQLServer. ...042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:01:42 PM Error: 2008-05-19 13:01:43.22 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-05-19 13:01:43.96 Code: 0xC0202009 Source:ExtAWMData Connection manager "XYZ ABC" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E4D Description: "ORA-01017: invalid username/password; logon denied ". End Error Error: 2008-05-19 13:01:43.96 Code: 0xC020801C... The package execution fa... The step failed.
Please advice on
1) Selection of provider for Oracle connection
2) ProtectionLevel
3) Isolation Level
4) Package configuration - Connection Strings (MSDAORA.1)
5) Publishing the package on Server best way.
Thnak a lot for all your valuable time and efforts.
AWM
View 6 Replies
View Related
Oct 17, 2007
I've installed 32 and 64 bit oracle drivers. I was testing running the two different dtexec.exe programs the other day, logged in as the sql agent and they both worked. Running the 64 bit as a job did not work. 32 bit does not work, since the agent process is 64 bit, from what I understand.
Today I'm working on it again and trying the same steps. Running the 32 bit executable dtexec is now returning "not a valid win32 executable". I swear this worked the other day, and works on our other server.
Running the 64bit executable from the agent just hangs up on this log entry:
HRD1.Cardiff (my oracle connection)
ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.
Anyone know what is going on?
http://support.microsoft.com/kb/918760/
I read this article, but didn't think it applied,since I chose for protectionLevel = sql to handle permission (I think they ) -
So I created a proxy using my credentials and gave it access to cmdexec and ssis and it worked. Can anyone explain this to me??
View 11 Replies
View Related
May 10, 2007
Hi,
I have created a simple report that reads data from Oracle within Visual Studio. I have no problem with previewing the report within Visual Studio. When I deploy the report to the Report Server (same machine) and try to open the report through Report Manager, I get the following error message:
An error has occurred during report processing.
Cannot create a connection to data source 'xxxx'.
System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
I am aware of the following issue that requires extra security to be assigned to the Oracle directories: http://support.microsoft.com/Default.aspx?kbid=870668
Even after applying the Read/Execute access to the Network Service account that is running the Reporting Service, I still get the error message.
Can anyone help me with the debugging of this issue?
Thanks,
Ben
View 6 Replies
View Related
May 9, 2006
I have created reports in SQl Server 2005 Reporting Services using an Oracle Data Sources. When I Preview the report in VS 2005, It runs fine but when I deploy it, it fails to make a coonection to the oracle data source.
Reports off the SQL Server Data Sources arerunning fine.
Can any one out there help me out on this. I will really appreaciate.
Regards,
Sam.
View 8 Replies
View Related
Dec 19, 1999
I am having some difficulty to update a record in a table from SQL Server 6.5 to Oracle 7.3 DB.
Basically I want to write a insert trigger in Sql Server 6.5 table and I want to update the same inserting record to Unix Oracle table. I tried by writing a DLL and use that in SQL Server External Stored Procedure, but I dont know how to pass the parameter for that. Parameter here is record which I want to insert in to Oracle Table.
Is there any easy way to do that? Did any body did that before? Please help me out.
Thanks a lot
View 2 Replies
View Related
Feb 5, 2003
We are in the process of setting up some type of interface between 2 applications that utilize SQL Server(ours) and theirs which utilizes Oracle. These servers will actually sit in the same server room. My thought was to take the simple approach of each DB setting up views needed by the other and assigning a user and security so the other DB can look at the data. We currently do this in house. THeir solution is to use a somewhat sophisticated mesaging system which will pass XML information back and forth between the systems. I hate to take the simpleton approach but why go through all that trouble where a simple view not only provides the same functionality, but is a dynamic as it gets. If anything goes wrong with the messaging system itself or problems with a specific message this needs to be resolved before the data is available. Non of this is a problm with the view. Any input from anyone who has this in place(either solution) appreciated. Or any arguments against my point of view
View 1 Replies
View Related
Jan 3, 2006
Hi,For a customer we have implemented a datawarehouse with a connection toOracle. From the beginning of the project the connection to Oraclegives troubles. The next morning is the connection still active andwhen the customer looks in the processes of SQL Server a " Wait type,RESOURCE_SEMAPHORE." is shown. For what i know. SQL Server is waitingfor a resource, in this case Oracle but doesn't tell me anything aboutwhat could be the problem.The customer uses the Oracle driver instead of a microsft oracledriver.What could it be? and how can we tackle this problem? Are there ways tolook from Oracle point of view? Can we monitor something?Greetz,Hennie
View 2 Replies
View Related
Apr 18, 2007
Hi,
We are trying to change our current SSRS reports to point to an Oracle 10g database. I can connect to the Oracle db from the report server via the ODBC Administrator and also through the BI 2005 studio. The connections work fine. However, when I publish the reports and try to run them from the web I always get a connection error. When I use the oracle connection it acts as if it doesn't see the oracle client and when I use ODBC it throws a werid 114 error.
Is there anything I am missing? I just don't understand why the report will work in BI Studio, but not when it is published (on the same machine)?
Any thoughts?
S
View 1 Replies
View Related
Feb 15, 2006
The problem being faced is : I am unable to access the oracle data through DTS Transform Data Task or Data Driven Query Task.
I have added the connection object . The test connection succeeds but when I move to the properties of either TDT or DDQ , It just hangs up
View 1 Replies
View Related
Dec 9, 2003
I have SQL Server 2000 and am using DTS to simply import some data located on a remote Oracle DB.
If I have the following information:
TNS Name:
ThisApp.world
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcpxxx.world)
(PROTOCOL = TCP)
(Host = SomeHost)
(Port = 1234)
)
)
(CONNECT_DATA =
(SID = App)
(GLOBAL_NAME = ThisApp.world)
)
)
And I also have the name of the Table.
Using the DTS Wizard, on the Choose a Data Source screen, I pick the following:
Data Source: Microsoft ODBC Drive for Oracle
Server:
Username:
Password:
I don't know what I should put into the other fields, given what I have above, i.e. what to put in for Server, Username, and Password! Or should I use a different procedure to import this Oracle data? I am almost positive I was not supplied the username/password. I was told I could connect given the above TNS information. What do you all recommned?
Your assistance will be greatly appreciated.
View 1 Replies
View Related
Jan 23, 2007
Hi
I am trying to switch between oracle and sqlserver databases to read the source data. I have used a parameter file to specify the connection parameters. For SQLserver the connection looks like in the file as below:
<?xml version="1.0"?><DTSConfiguration><DTSConfigurationHeading><DTSConfigurationFileInfo GeneratedBy="abvsh" GeneratedFromPackageName="Package" GeneratedFromPackageID="{8A304BF7-5325-4079-9D92-2B9BBF8793AA}" GeneratedDate="1/23/2007 4:46:08 PM"/></DTSConfigurationHeading><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ConnectionString]" ValueType="String"><ConfiguredValue>Data Source=dl;Initial Catalog=PM_DW;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Description]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[InitialCatalog]" ValueType="String"><ConfiguredValue>PM_DW</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Name]" ValueType="String"><ConfiguredValue>dl.PM_DW</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Password]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ProtectionLevel]" ValueType="Int32"><ConfiguredValue>1</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[RetainSameConnection]" ValueType="Boolean"><ConfiguredValue>0</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ServerName]" ValueType="String"><ConfiguredValue>dl</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[UserName]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration></DTSConfiguration>
the pacakge runs fine. But when i change the connection to Oracle, it gives me error.
The config file looks like when i put oracle connection is as follows:
<?xml version="1.0"?><DTSConfiguration><DTSConfigurationHeading><DTSConfigurationFileInfo GeneratedBy="I2vshrivas" GeneratedFromPackageName="Package" GeneratedFromPackageID="{8A304BF7-5325-4079-9D92-2B9BBF8793AA}" GeneratedDate="1/23/2007 4:46:08 PM"/></DTSConfigurationHeading><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ConnectionString]" ValueType="String"><ConfiguredValue>Data Source=pm62;User ID=pcm_62;Provider=OraOLEDB.Oracle.1;Persist Security Info=True;</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Description]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[InitialCatalog]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Name]" ValueType="String"><ConfiguredValue>dl.PM_DW</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Password]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ProtectionLevel]" ValueType="Int32"><ConfiguredValue>1</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[RetainSameConnection]" ValueType="Boolean"><ConfiguredValue>0</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ServerName]" ValueType="String"><ConfiguredValue>i2pm62</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[UserName]" ValueType="String"><ConfiguredValue>pcm_62</ConfiguredValue></Configuration></DTSConfiguration>
The error which i get when running from oracle source is this:
Information: 0x40016041 at Package: The package is attempting to configure from the XML file "C:oraTOsql-DataTXIntegration Services Project1Integration Services Project1Integration Services Project1 estConfig.dtsConfig".
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at Package, Connection manager "dl.PM_DW": An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, OLE DB Source [1]: The AcquireConnection method call to the connection manager "dl.PM_DW" failed with error code 0xC0202009.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "Package.dtsx" finished: Failure.
The program '[7264] Package.dtsx: DTS' has exited with code 0 (0x0).
Please let me know if you guys have any suggestion in what i am doing wrong.
Thanks,
Vipul
View 3 Replies
View Related
Apr 14, 2006
Hi, I dont know if I should post this question here, or on oracle forums, but here goes ...
I made a simple package that performs 2 Excecute SQL Tasks, one task does a select query on a SQL Server DB Table, the other task does a select query on an Oracle DB Table.
The package runs fine in BIDS when debugging, but when I deployed the package to a file system and added it to an sql server agent Job, it all went wrong ...
I tried the ms oledb dataprovider (ole db) for oracle but also the oracleclient data provider (ado.net) but the package always fails.
The error messages in the logfile are these:
event
OnError
computer
ComputerName
operator
NT AUTHORITYSYSTEM
source
Execute SQL Task PLSQL
sourceid
{B29C4FC9-3345-4657-8680-F770B8C2E136}
executionid
{7312A7EC-2555-4268-BB29-38659507BADD}
starttime
14/04/2006 16:40
endtime
14/04/2006 16:40
datacode
-1073573396
databytes
0x
message
Failed to acquire connection "aaa.bbb.oracleClient". Connection may not be configured correctly or you may not have the right permissions on this connection.
the OnError logrow for the package itself says almost the same.
Now my question is: What do I need to configure to get it all working? I think I need to configure the oracle db no? What should I configure? ...
View 6 Replies
View Related
Aug 30, 2007
Hi,
I was trying to connect to Oracle Source in SSIS
1. Err: Test connection failed because of an error in initializing provider. Oracle Client and networking components were not found
Sol: I installeed the Oracle Client tools
2. Err: ORA -12154: TNS: Could not resolve teh connect identifier specified
Sol: Then I point out the TNS file
3. Now I coonect the Oracle db . I go to Connection Manager . Specifies the provide as: Native OLE DB Oracle Provide for OLE DB, Select my DB, provide teh user name and password. and check if the connection passed.
Then in my data Flow Task when I add this source and check the Colmns its gives me an error./ sort of warning
The component reported the following warnings:
Warning at {C947B.......} [Ole DB Source[1]]: Cannot retrieve the column code page info from the OLE DB provider. if the components supports teh "DefaultCodePage" property, the code page from that property will be used.....
Will this warning has an significance. i dont see any error in my output data. but is there something I m doing wrong.
4. When I set my ProtectionLevel under Security in package property to "Dont Save Sensitive" in order to easily configure the package I m getting this error: failed Validation. The default one was EncryptSensitiveWithUserKey then its running smoothly.
Can somebody advice me on this?
I addded the all the errors and solution for 1 and 2 becuase in that way this will be helpful in future.
View 5 Replies
View Related
Oct 31, 2007
i have successfully implemented a dynamic connection string based on a dropdown list of environments (dev, test, prod). it works well during testing in the vs2005 ide; but once i deploy it to the rs server, it complains that the credentials are not stored in the rs server database and won't run the report.
as in most large organizations, the developers do not have control over the rs server, so i cannot manipulate rs config or web config files on the server side; so, how do i get past this obstacle?
thanks in advance
View 1 Replies
View Related
Jan 23, 2007
Hi All,
Is there a way in SSIS to change the database connection to sqlserver or oracle or db2 without choosing the connection manager in the source.
For e.g. I ran a package which is reading data from sqlserver and later i want to connect to oracle to read the data but without changing the connection manager in the source.
Basically, i want to find out from you gurus is about a way to switch between databases without changing the connection managers. OR the only way is to make different sets of packages for oracle / db2 and sqlserver sources ?
Thanks,
Vipul
View 2 Replies
View Related
Sep 13, 2006
help - I€™ve been stuck on this for days.
My software vendor limits the sessions to one (1) per log-in to Oracle 9i and I€™m having tons of problems trying to extract data through an SSIS package. Everytime I run the package SSIS already logged in and the OLE DB source fails because of the sessions exceeded error.
Is there any way to limit the connection to just when I need the data to pump across on the OLE DB source?
Thank you very much for any help.
Regads,
Nestor
View 1 Replies
View Related
Jun 20, 2006
Hi
I have a number of scripts that run against an oracle server to retreive data to manipulate before populating a sqlserver database. I am connecting using an Odbc connection and using the DataReader Source to read from the Oracle table. It all seems to work ok.
When I have tried to extract data from an Oracle view in the same way it doesn't seem to work. The error message mentioned the PrimeOutput() method and error code 0xC02090F5. The view is very big so is it possible that the connection simply timed out?
Any ideas?
Thanks
B
View 6 Replies
View Related
Jun 23, 2006
I created a package that uses configuration file for db connections. SQL Server connection works fine, but for oracle it fails.
I m putting servername=alias from tnsnames.ora file.
the connection works fine from ide
View 4 Replies
View Related
Feb 6, 2007
While upgrading several packages from DTS 2000 to SSIS I came across a couple of packages where the source data comes from an Oracle DB. Until now I have not migrated data from an Oracle source.
When I tried to create a new connection I got the error:
"System.Data.Oracle client requires Oracle client software version 8.1.7 or greater."
This is being developed on a machine that would not have any oracle drivers before now, so I THOUGHT it would be as simple as downloading the drivers, but the resolution seems to be much more complex than that. When I researched it, it appeared that I needed to download the Oracle 9i software. The installation is about 10 GB and this seemed like overkill to just be able to connect to a database.
Is this in fact the correct solution? If so, or even if not, can I get a quick run down of the steps involved, and anyone's experience (problems, etc..) on the topic?
View 5 Replies
View Related
