Hi All
I get a very strange error when running the JDBC in WAS6.0
This is running the Clarity 7.5.3 Application
Failed to verify database: Io exception:
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
Any ideas
Hi,
I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:
Message
Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.
I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job. I've four posts regarding this error message on the MSDN forums that aren't helpful at this moment - I'm hoping that someone will have found a solution since those posts. Any suggestions are welcomed.
Thanks for your help!
Sue
Is there any step by step help sites for setting up SQL 2005 linked (oracle 10) server?
I find MSDN articles but they referance winNT and 2000, I'm not getting very far and I'm not a DBA but need to get this working asap.
Hello:
I downloaded JDBC drivers SP3. When I tried to connect to the SQL Server, I get the following error:
An error occured while establishing the connection.
Type: java.sql.SQLException Error Code: 0 SQL State: 08001
Message:
[Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
The connection string is:jdbcqlserver://VENKI-2008:1433;databaseName=MedDRA.
The following drivers are loaded:
msbase.jar
mssqlserver.jar
msutil.jar
Thanks for your help.
Venki
Given this simple sproc:-
Create proc spGetData
as
select 1 as PrettyDeterministicMeThinks
you cannot do this:
create function fnGetData()
returns @table table (col1 varchar(10))
as
begin
insert into @table exec spGetData --This is my function_body
return
end --you get an "Invalid use of side-effecting or time-dependent operator in 'INSERT EXEC' within a function" error
but you CAN do this
create function fnGetData()
returns @table table (col1 varchar(10))
as
begin
insert into @table select 1 as PrettyDeterministicMeThinks --This is my function_bodyreturn
end
I just wanted to know what the difference was as books online refers to the function body as "a series of Transact-SQL statements that populate a TABLE return variable." which is what I thought I was doing in either case. So my question was really how is this wrong
THX
We see an unusual case where a query seems to be taking a long time (more than 30 minutes) as shown by the Java thread dump (below) - however the SQL server DB does'nt show any corresponding Connection for the query at the lower layer.
The JDBC layer seems to be "in progress" as far as processing the results of the query are concerned. If the Connection was dropped or had a failure we should have seen a corresponding SQLException in the JDBC layer - which is also not the case.
Any tips on how to debug this? Is there a timeout set on the JDBC Connection which causes it to wait before it detects any failures?
thanks
"JMS Session Delivery Thread" daemon prio=6 tid=0x0000000006434780 nid=0x868 run
nable [0x0000000020d6e000..0x0000000020d6f860]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePrep
aredStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PreparedState
mentExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source
)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unkno
wn Source)
- locked <0x00000000955574e0> (a com.microsoft.sqlserver.jdbc.TDSWriter)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeUpdate
(Unknown Source)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeUpdate(Del
egatingPreparedStatement.java:101)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeUpdate(Del
egatingPreparedStatement.java:101)
at org.apache.ojb.broker.accesslayer.JdbcAccessImpl.executeInsert(JdbcAc
cessImpl.java:213)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.storeToDb(Persistenc
eBrokerImpl.java:2021)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.store(PersistenceBro
kerImpl.java:977)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.store(PersistenceBro
kerImpl.java:1014)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.store(PersistenceBro
kerImpl.java:884)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.storeAndLinkOneToOne
(PersistenceBrokerImpl.java:1074)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.storeReferences(Pers
istenceBrokerImpl.java:1050)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.storeToDb(Persistenc
eBrokerImpl.java:1981)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.store(PersistenceBro
kerImpl.java:977)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.store(PersistenceBro
kerImpl.java:1014)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.store(PersistenceBro
kerImpl.java:884)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.store(Delegati
ngPersistenceBroker.java:220)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.store(Delegati
ngPersistenceBroker.java:220)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.store(Delegati
ngPersistenceBroker.java:220)
at com.serus.db.ojbutils.SerusPersistenceBrokerHandle.store(SerusPersist
enceBrokerHandle.java:178)
at com.serus.common.OJBDAOUtil.store(OJBDAOUtil.java:636)
at com.serus.dao.wip.AbsWipDAO.saveDTO(AbsWipDAO.java:251)
at com.serus.dao.wip.tx.LotTXDAO.saveLotTx(LotTXDAO.java:56)
at com.serus.manager.wip.txprocessing.AbstractTxProcessorImp.storeLotTx(
AbstractTxProcessorImp.java:1380)
at com.serus.manager.wip.txprocessing.LotTxProcessingMoveStage.storeLotT
x(LotTxProcessingMoveStage.java:802)
at com.serus.manager.wip.tx.LotTxManager.saveLotTx(LotTxManager.java:248
)
at com.serus.manager.wip.tx.LotTxXMLProcessor.parseMessageOriginal(LotTx
XMLProcessor.java:137)
at com.serus.manager.wip.tx.LotTxXMLProcessor.parseMessage(LotTxXMLProce
ssor.java:78)
at com.serus.events.listener.SerusJMSListener.onSerusMessage(SerusJMSLis
tener.java:197)
at com.serus.events.listener.AbstractEventListener.onMessage(AbstractEve
ntListener.java:53)
at progress.message.jimpl.Session.deliver(Unknown Source)
at progress.message.jimpl.Session.run(Unknown Source)
at progress.message.jimpl.Session$SessionThread.run(Unknown Source)
Hi,
I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client 10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was ok.
from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->
the oracle publisher is displayed in the list of publisher but when press ok i got the following error :
TITLE: Distributor Properties
------------------------------
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient.
Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any idea about this error ?
Thanks
Tarek Ghazali
SQL Server MVP.
I know that this is primarily a SQL server group, but I am hopingsomeone has experience in running Oracle alongside SQL servers. Wecurrently only have SQL server installations in our organization.However one of our department is considering buying a third-partyapplication that runs on Oracle. We are interested to find out anyproblems that people might have experienced in such an environment. Iam doing some research on this subject to find out what I can, but Ithought I would look to the experts on this.Any input would be greatly appreciated.ThanksKarthika
View 2 Replies View RelatedHi,
Is it possible Oracle Stored Proc or Jobs able to schedule in sql job?.
Thanks,
Ravi
am i going to cause problems if i install MSSQL2005 on a server with Oracle already installed and running ?
thank you
My application which ran perfectly well yesterday suddenly stopped working in this morning with following error message. I didn't change anything, at least I believe. Interesting thing is that I don't use any Oracle connection but connects to MS SQL Server 2005 Express version locally. Error messages are different according to the connection string though I don't think it makes difference:
ConnectionString = <add key="Databasehandtool1" value="Data Source=.SQLEXPRESS;Database=handtool;SSPI=true" />ErrorMessage from VS2008 ="Unable to get records. Object reference not set to an instance of an object."
ConnectionString = <add key="Databasehandtool1" value="Data Source=.SQLEXPRESS;Database=handtool;User Id=handtool_DB;Password=mypassword" />ErrorMessage from VS2008 = "Unable to get records. Unable to connect to database. ORA-12154: TNS:could not resolve the connect identifier specified." By the way, the application was generated from IronSpeed 5.1 Enterprise. My development environment is : VS2008, SQL2005 EXPRESS, Windows XP SP2, ASP.NET 2.0
We have actually an Oracle server in the network though. My gut feeling is that something might have changed in my network server during the night but how come it can possibly affect my application running on my local PC. I checked the connection of local SQL Express Server from SQL Server Management Studio and it connected well with UserID=handtoo_DB and showed all tables and stored procedures required for the application. So there is no problem in SQL Server database side.
I would welcome and appreciate any input.
fudata
I have read similar posts to this, but I am still having problems.
I am trying to use connection pooling to connect to a local SQL Server 2005 database. I am running my application using
MyEclipse Enterprise Workbench. I have verified that sqljdbc.jar resides in "WebRoot/WEB-INF/lib/"
"WebRoot/WEB-INF/web.xml":
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsichemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<resource-ref>
<res-ref-name>jdbc/DefaultDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
"WebRoot/META-INFcontext.xml":
<?xml version="1.0" encoding="UTF-8"?>
<Context>
<Resource name="jdbc/DefaultDS"
auth="Container"
type="javax.sql.DataSource"
username="tec"
password="tec"
driverClassName="com.microsoft.sqlserver.jdbc.SQLServerDrive"
url="jdbcqlserver://localhost:1433/tec;databaseName=tec;user=tec;password=test;"
validationQuery="select 1"
maxActive="10"
maxIdle="2"/>
</Context>
Classpath:
<?xml version="1.0" encoding="UTF-8"?>
<classpath>
<classpathentry kind="src" path="src"/>
<classpathentry kind="con" path="org.eclipse.jdt.launching.JRE_CONTAINER"/>
<classpathentry kind="con" path="com.genuitec.eclipse.j2eedt.core.J2EE14_CONTAINER"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/dom.jar"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/jaxen-full.jar"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/jaxp-api.jar"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/jdbc2_0-stdext.jar"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/sqljdbc.jar"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/jstl.jar"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/mail.jar"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/sax.jar"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/saxpath.jar"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/standard.jar"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/xalan.jar"/>
<classpathentry kind="lib" path="WebRoot/WEB-INF/lib/xercesImpl.jar"/>
<classpathentry kind="output" path="WebRoot/WEB-INF/classes"/>
</classpath>
Code to connect:
import java.io.Serializable;
import java.sql.*;
import javax.sql.*;
import javax.naming.*;
public int testConnect(){
Connection conn = null;
InitialContext ctx = null;
java.sql.Statement stmt = null;
try {
ctx = new InitialContext();
Context envCtx = (Context) ctx.lookup("java:comp/env");
DataSource ds = (DataSource) envCtx.lookup("jdbc/DefaultDS");/*This is generating the Cannot load JDBC driver class... error*/
conn = ds.getConnection();
stmt = conn.createStatement();
return CONSTANT.SUCCESS;
} catch (Exception e) {
return CONSTANT.FAILURE;
}finally {
try {
if (stmt != null)
stmt.close();
if (conn != null)
conn.close();
if (ctx != null)
ctx.close();
} catch (Exception ex) {
// do nothing
return CONSTANT.FAILURE;
}
}
}
Any ideas would be greatly appreciated.
How to launch Oracle SQL Developer through "Run" window in windows as we can launch SQL Server Management studio through "Run" command line using command line "sqlwb -S localhost -d MyDB -U sa -P
View 4 Replies View Related
hi, i am using sqljdbc.jar in a java applet and i am using Netbeans for development. i am able to connect with the SQL Server from the IDE. however, when i try to debug the SQL part of the code, i am getting an exception at :
DriverManager.registerDriver(new com.microsoft.sqlserver.jdbc.SQLServerDriver());
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
String connectionUrl="jdbcqlserver://localhost:49182;databaseName=NanoBase;";
Connection con = java.sql.DriverManager.getConnection(connectionUrl, "test", "Walt787sop289");
where it says that it cannot find the class. i am also putting down the exception information.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.javaws.Launcher.executeApplication(Launcher.java:1273)
at com.sun.javaws.Launcher.executeMainClass(Launcher.java:1219)
at com.sun.javaws.Launcher.doLaunchApp(Launcher.java:1066)
at com.sun.javaws.Launcher.run(Launcher.java:105)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.NoClassDefFoundError: com/microsoft/sqlserver/jdbc/SQLServerDriver
at VncViewer.performSql(VncViewer.java:115)
at VncViewer.readParameters(VncViewer.java:743)
at VncViewer.init(VncViewer.java:152)
at VncViewer.main(VncViewer.java:53)
... 9 more
Caused by: java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at com.sun.jnlp.JNLPClassLoader.findClass(JNLPClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
i am currently using java web start to debug the application. earlier, the application was running smoothly during debug (when not being run through java web start), but was failing to run when started externally say within a html file as an applet. however, when i used java web start, the exception is being pointed to the line in bold. i have added sqljdbc.jar to the list of libraries and have added it under the compile as well as the run time configuration. i would appreciate if this exception could be resolved. if i have to configure anything in the classpath, pls suggest how i can configure it under netbeans.
regards,
anant
Hi all,
We've just stumbled on a 1.0 version incompatibility with the JDBC specs.
Problem: A table with SMALLINT column. According to JDBC specs version 3.0
(p.B-179) and 4.0 (p.221)), the value should be converted to Integer type.
Unfortunatelly we get a Short object :(
Now, I remember, this case was also affecting old JSQLConnect driver from
DataDirect. Could that problem sneak to new MS driver too?
Please let me know any resolution to this problem if exists.
The issue has not been fixed in CTP 1.1 version. Any ideas if it can be fixed??
Cheers,
Piotr
Hi I am using JDBC driver version "1.0.809.102". In the ms sqlserver 2000 database I am acessing there is a table named as "CDR_DATA_2007-09-12". When I run the following query "select * from CDR_DATA_2007-09-12" i get the following exception. Please help me out to solve this problem.
com.microsoft.sqlserver.jdbc.SQLServerException: Line 1: Incorrect syntax near '-'. at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement$StmtExecCmd.doExecute(Unknown Source) at com.microsoft.sqlserver.jdbc.TDSCommand.execute(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeQuery(Unknown Source) at Test.mssqldb(Test.java:80) at Test.main(Test.java:26) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.intellij.rt.execution.application.AppMain.main(AppMain.java:86)
Thanks,Gavin
While i try to download jdbc for sql 2005 in english, the file that i downloaded was in italian. i've tried all version but he always download italian version. Anyone notice that?
View 3 Replies View Related
Mr Mugundan.......
My web application is running in jdk1.4, tomcat4, ms sql 2005 in win 2003 environment. I am using jdbc type 4 driver for sql server 2005 (com.microsoft.sqlserver.jdbc.SQLServerDriver, sqljdbc_1.2)database connection this gives an error even gives error in both sqljdbc1.1 and 1.2 versions...
please see the error message...
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
tomcat server error message begin
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1SELECT costct from costctmain where costct not in (select distinct mainct from costcts) 1
pageName : GENERAL_ERROR_PAGE
select count(*) from ( select P1.type, SUM(CASE P1.costct WHEN '11234578' THEN P1.total ELSE 0 END) AS a11234578, sum(P1.total)
w.project as type, e.costct, sum(t.tshours) as total from tswork t right outer join emp e on t.eid = e.eid join workmap w on t
ct pp on w.project = pp.pno where tsstatus in ('appr','subt') and tsupload = 'y' and e.costct in (11234578) and tsdate >= (sel
od where period = 'APR' and periodyear = 2007) group by e.costct, w.project union select PP.* from ( select t.jno as type, e.c
s total from tsjob t right outer join emp e on t.eid = e.eid where tsstatus in ('appr','subt') and tsupload = 'y' and e.costct
te >= (select startdate from period where period = 'APR' and periodyear = 2007) group by e.costct, t.jno ) as PP where type !=
y P1.type ) as P3
Error in executing query
com.microsoft.sqlserver.jdbc.SQLServerException: The IOBuffer.process operation returned an unknown packet type:-120. Index:70.
DS_DONE(-3) TDS_DONEPROC(-2) TDS_DONEINPROC(-1)
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.buildNextRowset(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement$StatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeQuery(Unknown Source)
at eTime.DBConnectManager.execQuery(DBConnectManager.java:198)
at reports.UtilisationReport.getData(UtilisationReport.java:333)
at reports.UtilisationReport.generateReport(UtilisationReport.java:109)
at reports.DivUtilisationReportServlet.getReportData(DivUtilisationReportServlet.java:230)
at reports.DivUtilisationReportServlet.doGet(DivUtilisationReportServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:696)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:809)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:198)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:144)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:209)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:138)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2459)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:132)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:118)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:116)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:126)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:152)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:534)
java.lang.NullPointerException
at reports.UtilisationReport.getData(UtilisationReport.java:335)
at reports.UtilisationReport.generateReport(UtilisationReport.java:109)
at reports.DivUtilisationReportServlet.getReportData(DivUtilisationReportServlet.java:230)
at reports.DivUtilisationReportServlet.doGet(DivUtilisationReportServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:696)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:809)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:198)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:144)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:209)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:138)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2459)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:132)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:118)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:116)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:126)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:152)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:534)
select count(*) from ( select aatype as type, SUM(CASE P2.costct WHEN '11234578'THEN P2.total ELSE 0 END) AS a11234578, SUM(P2.t
select aatype, costct, sum(tshours) as total from tsnr t join emp e on t.eid = e.eid where tsstatus in ('appr','subt') and tsup
in ('11234578') and tsdate >= (select startdate from period where period = 'APR' and periodyear = 2007) group by aatype, costct
) as P3
Error in executing query
com.microsoft.sqlserver.jdbc.SQLServerException: The IOBuffer.process operation returned an unknown packet type:-120. Index:70.
DS_DONE(-3) TDS_DONEPROC(-2) TDS_DONEINPROC(-1)
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.buildNextRowset(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement$StatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeQuery(Unknown Source)
at eTime.DBConnectManager.execQuery(DBConnectManager.java:198)
at reports.UtilisationReport.getData(UtilisationReport.java:333)
at reports.UtilisationReport.generateReport(UtilisationReport.java:133)
at reports.DivUtilisationReportServlet.getReportData(DivUtilisationReportServlet.java:230)
at reports.DivUtilisationReportServlet.doGet(DivUtilisationReportServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:696)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:809)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:198)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:144)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:209)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:138)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2459)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:132)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:118)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:116)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:126)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:152)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:534)
java.lang.NullPointerException
at reports.UtilisationReport.getData(UtilisationReport.java:335)
at reports.UtilisationReport.generateReport(UtilisationReport.java:133)
at reports.DivUtilisationReportServlet.getReportData(DivUtilisationReportServlet.java:230)
at reports.DivUtilisationReportServlet.doGet(DivUtilisationReportServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:696)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:809)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:198)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:144)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:209)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:138)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2459)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:132)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:118)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:116)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:126)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:595)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:432)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:954)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:152)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:534)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
end of tomcat server error ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
but when i use sql server 2000 driver jdbc ("sun.jdbc.odbc.JdbcOdbcDriver"), It works fine but i need to use type 4 driver please help me to fix this issue.
advance many thanks.....
I see the following error randomly -
* SQLException during execution of sql-statement:
* sql statement was 'SELECT count(*) FROM PRODUCT_ATTRIBUTES A0 WHERE A0.PRODUCT_ID = ?'
* Exception message is [An exception occurred during the DBComms.receive method. Operation:Connection reset. Context1) [Thread[pool-2-thread-1,5,main],
IO:18563, Dbc:c67b9]. PktNum:0. TotalReceived:0. PktSize:4,096.]
* Vendor error code [0]
* SQL state code [08S01]
* The root stack trace is -->
* com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context1)
[Thread[pool-2-thread-1,5,main], IO:18563, Dbc:c67b9]. PktNum:0. TotalReceived:0. PktSize:4,096.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PreparedStatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:93)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:93)
at org.apache.ojb.broker.accesslayer.JdbcAccessImpl.executeQuery(JdbcAccessImpl.java:293)
at org.apache.ojb.broker.accesslayer.RsQueryObject.performQuery(RsQueryObject.java:72)
at org.apache.ojb.broker.accesslayer.RsIterator.<init>(RsIterator.java:189)
at org.apache.ojb.broker.accesslayer.ReportQueryRsIterator.<init>(ReportQueryRsIterator.java:45)
at org.apache.ojb.broker.core.ReportRsIteratorFactoryImpl.createRsIterator(ReportRsIteratorFactoryImpl.java:59)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getRsIteratorFromQuery(PersistenceBrokerImpl.java:2217)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getReportQueryIteratorFromQuery(PersistenceBrokerImpl.java:2252)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getReportQueryIteratorByQuery(PersistenceBrokerImpl.java:2177)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getCount(PersistenceBrokerImpl.java:2148)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.getCount(DelegatingPersistenceBroker.java:383)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.getCount(DelegatingPersistenceBroker.java:383)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.getCount(DelegatingPersistenceBroker.java:383)
at org.apache.ojb.broker.core.proxy.CollectionProxyDefaultImpl.loadSize(CollectionProxyDefaultImpl.java:154)
at org.apache.ojb.broker.core.proxy.CollectionProxyDefaultImpl.size(CollectionProxyDefaultImpl.java:268)
at com.serus.common.caching.FlyWeight.getCollection(FlyWeight.java:272)
at com.serus.common.caching.FlyWeight.intercept(FlyWeight.java:125)
at com.serus.dto.core.ProductDTO$$EnhancerByCGLIB$$52ef9193.getProductAttributes(<generated>)
at com.serus.manager.scm.ModelManager.getProductAttributeForProductIdAttributeName(ModelManager.java:1664)
at com.serus.inca.outbound.PNAdapter.processTemplate6_New(PNAdapter.java:910)
at com.serus.inca.outbound.PNAdapter.runChildAdapter(PNAdapter.java:144)
at com.serus.inca.outbound.WSBaseAdapter.runAdapter(WSBaseAdapter.java:114)
at com.serus.inca.outbound.WorkstreamProcessor.startProcessor(WorkstreamProcessor.java:375)
at com.serus.inca.outbound.WorkstreamProcessor.call(WorkstreamProcessor.java:152)
at com.serus.inca.outbound.WorkstreamProcessor.call(WorkstreamProcessor.java:78)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)
My database and driver details are as below:
Database Product Version 9.00.1399
Driver Name Microsoft SQL Server 2005 JDBC Driver
Driver Version 1.1.1501.101
Driver Major Version 1
Driver Minor Version 1
It is a AMD 64 bit 2 dual core machine which is deployed with jdk 1.5 update 10.
Has anyone seen this before?
Thanks
-giriraj
Dear All,
Using JDBC trying to connect MS SQL server 2005. Getting the following error:
org.apache.commons.dbcp.DbcpException: java.sql.SQLException: Network error IOException: Connection refused: connect
java.sql.SQLException: Network error IOException: Connection refused: connect
java.net.ConnectException: Connection refused: connect
org.apache.commons.dbcp.DbcpException: java.sql.SQLException: Network error IOException: Connection refused: connect
java.sql.SQLException: Network error IOException: Connection refused: connect
java.net.ConnectException: Connection refused: connect
Here is the TCP/IP setting in our SQL server 2005:
I disable the Windows 2003 R2 firewall, but that didn’t help.
In SQL server 2005 for Remote connections:
Enabled “Local and Remote connections: Using both TCP/IP and Named Pipes
In TCP/IP Prosperities:
IP Addresses:
IP1: Active: Yes
Enabled: Yes
IP address: the server IP address Example 192.168.0.1
TCP Dynamic port: 0
TCP Port: 1433
///
IP2: Active: Yes
Enabled: Yes
IP address: the server IP address Example 192.168.0.1
TCP Dynamic port: 0
TCP Port: 1433
////
IP3: Active: Yes
Enabled: Yes
IP address: the server IP address Example 192.168.0.1
TCP Dynamic port: 0
TCP Port:
///
IP4: Active: Yes
TCP Dynamic ports: 1053
TCP Port:
For Protocols:
Under general:
Enable: Yes
Keep Alive: 30000
Listen ALL: Yes
No Delay: No
I think that should be enough info to start with.
Please advice.
Thanks for any help.
Abrahim
im stuck and despirately need help. my jdbc driver for mssql server 2000 (dont laugh).
here's the code:
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
Connection con = DriverManager.getConnection("jdbc:microsoftqlserver://user:1433");
and here's the exception it throws at me:
Exception in thread "main" java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:207)
at jdbctest.NewClass.main(NewClass.java:29)
i know this is a very common question for a thread, but u gotta pls answer me.
Hi,
Anyone know what I'm doing wrong? My JDBC is erroring. I'm using the Microsoft 1.2 driver, I have a SQL Server 2005 back end with the following clients connecting to it:
ASP.NET 2.0 web application
Visual Studio C# console applications (*2)
Java command line client.
Everything runs hunky-dory on my dev. environment (laptop, local, launched via Visual Studio) but now it's on the server, the Java client is erroring.
When I use the 1.2 sqljdbc.jar file, I get:
25-Jan-2008 12:20:29 com.microsoft.sqlserver.jdbc.SQLServerConnection Prelogin
WARNING: ConnectionID:1 TransactionID:0x0000000000000000 Prelogin response packet not marked as a REPLY
My Error Trap:
--------------
SQL STATE : 08S01
ERROR CODE: 0
MESSAGE : The TDS protocol stream is not valid.
When I use the 1.1 file I get:
My Error Trap:
--------------
SQL STATE : 08S01
ERROR CODE: 0
MESSAGE : The TDS prelogin response is incomplete. The target server must be SQL Server 2000 or later.
I don't know what these errors mean. I've tried compiling as java 1.5 and 1.6 with the same results. It works fine on my laptop (Vista Home Premium) but won't when I try and connect to the server. I've searched the web on the error messages and can't find an answer yet.
Any help appreciated.
My drivers are the Windows versions. Also, everything else is working okay on the server: The consoles are up and running and the web browser connects and SELECTs, UPDATEs & INSERTs okay.
I ought to mention: My laptop is running SQL Server Development edition and the Server is running obviously something else.
My SQL Server version is 9.0.1399 and the OS is Windows Server 2003. SQL Authentication is mixed mode.
The javadoc for statement.setMaxRows(maxROWS) reads:
"Sets the limit for the maximum number of rows that any ResultSet
object can contain to the given number. If the limit is exceeded, the excess
rows are silently dropped."
In fact, it seems that the driver calls set rowcount MAXROWS on the connection.
While this superficially will work, if your query manipulates records sets that exceed MAXROWS, the subqueries will also be limited in their size. And this is not what you expect. The javadocs suggest that it is only the result that is truncated. Silently.
It seems that setFetchSize is more appropriate.
I am using a relatively recent jar (248KB).
I hope that somebody finds this useful and that the development team will adjust the javadocs or the behavior.
Other than that, thanks for a great driver! ;-)
Hi,
I have a small program to query a stored procedure in SQL Server 2000 and print out the contents of a returned date field. The program is as follows:
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
String connectionUrl = "jdbcqlserver://host:1433;database=db;user=u1;password=p1";
Connection con = DriverManager.getConnection(connectionUrl);
CallableStatement cbstmt = con.prepareCall(" {call stored_proc (?,?)}");
cbstmt.setString(1, "value1");
cbstmt.setString(2, "value2");
ResultSet resultSet = cbstmt.executeQuery();
while (resultSet.next()) {
System.out.println(resultSet.getDate("end_date"));
}
The date field is nullable, and the records in the database are currently null. But when I run this program, I get the following exception when using version 1.2 of the MS JDBC Driver:
com.microsoft.sqlserver.jdbc.SQLServerException: The conversion from int to DATE is unsupported.
at com.microsoft.sqlserver.jdbc.ServerDTVImpl.getValue(Unknown Source)
at com.microsoft.sqlserver.jdbc.DTV.getValue(Unknown Source)
at com.microsoft.sqlserver.jdbc.Column.getValue(Unknown Source)
at com.microsoft.sqlserver.jdbc.Column.getValue(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerResultSet.getDate(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerResultSet.getDate(Unknown Source)
at jdbc.main(jdbc.java:38)
Exception in thread "main"
This started happening when we upgraded to the new driver. Any ideas why?
Thanks.
Hi,
We are running one shopping site for our organisation, which includes Tomcat 5.0.28 , IIS & SQL Server 2000 SP3 hosted on platform Microsoft Windows Server 2003 Enterprise Ed. , we are running jsp pages server side and site is hosted on internet,
but it is observed that after every 1/2 days , page will throw following exception, and site get blocked.
javax.servlet.ServletException: Network error IOException: No buffer space available (maximum connections reached?) : connect
Can anybody help please?
I am beginner with JDBC - SQL Server Connectivity ,
I am giving our configuration details:
Driver Used - Microsoft SQL Server Driver 2000 SP3
Protocol Used - TCP/IP which open socket connection on default port 1433
Authentication - Mix Mode Authetication ( using sa account login)
Even setting done within LOCAL instance running on server to allow max. connections i.e 32767
My observation is that some kind of virus threat may causing this error, because if server will be rebooted, we doesn't
get any error and everything works fine.
Waiting for your suggestions and advise.
Thanks a lot.
Regards,
Mandar Velankar
We are in the process of configuring a j2ee application with SQL Server 2005. We have downloaded the new version of SQL Server 2005 Java Database Connectivity (JDBC) Driver 1.0.
We are having some issues in getting it to work using the XA datasource. Description of the error is as follows:
javax.transaction.xa.XAException: java.sql.SQLException: Failed to create the XA control connection. Error: Could not find stored procedure 'master..xp_sqljdbc_xa_init'..
at com.microsoft.sqlserver.jdbc.SQLServerXAResource.start(Unknown Source)
Has anyone else has encountered this and possibly found a solution.
Regards,
Bindu
Hello,
I'm trying to configure JBoss application server to use SQLServer 2005 as database with XA transactions.
I can start a new transaction, access SQLServer from within the transaction, but when committing, there is the following XAException from SQLServer:
16:04:20,926 INFO [STDOUT] javax.transaction.xa.XAException: java.sql.SQLException: COMMIT: Status:0 msg:*** SQLJDBC_XA DTC_ERROR Context: xa_commit, state=1, StatusCode:-4 (0xFFFFFFFC) ***16:04:20,926 INFO [STDOUT] at com.microsoft.sqlserver.jdbc.SQLServerXAResource.commit(Unknown Source)16:04:20,941 INFO [STDOUT] at org.jboss.resource.adapter.jdbc.xa.XAManagedConnection.commit(XAManagedConnection.java:176)16:04:20,941 INFO [STDOUT] at com.arjuna.ats.internal.jta.resources.arjunacore.XAResourceRecord.topLevelOnePhaseCommit(XAResourceRecord.java:641)16:04:20,941 INFO [STDOUT] at com.arjuna.ats.arjuna.coordinator.BasicAction.onePhaseCommit(BasicAction.java:2619)16:04:20,941 INFO [STDOUT] at com.arjuna.ats.arjuna.coordinator.BasicAction.End(BasicAction.java:1779)
[...]
The system is running on Windows Server 2003 64bit with SQLServer 2005 64bit, and JBoss running on JDK 1.5.0 (32bit)
Can anyone tell me what this message indicates?
Regards,
Martin
I've got an import app written in Java. One table I'm importing from contains 22 million records. When I run the app in a 2000 environment, I have my max heap set at 512, and the table gets imported. When I run in a 2005 environment, I have to change the max heap to 1152 or it will error out with a similiar error:
com.microsoft.sqlserver.jdbc.SQLServerException: The system is out of memory. Use server side cursors for large result sets:Java heap space. Result set size:854,269,999. JVM total memory size:1,065,484,288. (<--this is with max heap at 1024)
what is the difference between the 2000 and 2005 JDBC that I have to set max heap in one and not the other?
Hi;I went to the microsoft site to try to find a guide to the errormessages that the jdbc drivers give ( for sqlserver 2000 ).I had no luck.Does anyone know if there is such a guide?I got this mysterious error message below in my logs ( nothing visiblein user land ).Anyone know what it means?Thanks in advanceStevejava.sql.SQLException: [Microsoft][SQLServer 2000 Driver forJDBC][SQLServer]Transaction (Process ID 151) was deadlocked on lockresources with another process and has been chosen as the deadlockvictim. Rerun the transaction.
View 5 Replies View Related
Hey...
I am running a parent SSIS package (running sp2, 9.0.3042) that calls several child packages.
On our development server, we now cannot run this because we get 1 or more of these errors:
"Error 0x80004003 while preparing to load the package. Invalid pointer . "
"Error 0xC0011008 while preparing to load the package. Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored. . "
It is not occuring on the same packages. It varies every time it is run.
I can run every one of the child packages individually, using the same login ID that the parent is executed under.
The parent package works fine on my local machine and other servers running the same version of SSIS. Just not on this server.
Does anyone have any ideas???
Thanks
BobP
I am sync. for the first time (Merge Replication using SQL 2005 and Mobile) and this error keeps poping up on the emulator. I am tring out the tutorial. :) boss on my butt.
Does anyone have any ideas or a solution to this...your help is WELL APPRECIATED ...
Error code: -2147024809
zo
Hi there
I have small problem with the ADO 2.6 - 2.8 Command object.
I created a Stored procedure preforming some tasks within a tran.
whitin the tran i'm collecting the @@ERROR values and in the end (after tran closing )generating the correct error string - which will be send back to the caller
in the VB6 app, i'm using a command object with the next line:
Set MyRecordset= MyCommand.Execute
In all the cases and option, when i run the SP - the command preform the tasks and return closed recordset (with the currect answer) and i can't read it.
the only solution that worked until now: i need to call MyRecordset.Open which will requery the SP again and generate an error (User defined error).
It happens only when i run command.execute with SP that preforms multitasks and return result recordset.
CAN ANY ONE HELP ME
We have a DTS package utilizing an ODBC connection to and Oracle database to run a few updates. I can TNSPING the Oracle instance but get the error Ora-01034 ORACLE not available when trying to run the package.
Any ideas?