Oracle Source Connection Error
Aug 30, 2007
Hi,
I was trying to connect to Oracle Source in SSIS
1. Err: Test connection failed because of an error in initializing provider. Oracle Client and networking components were not found
Sol: I installeed the Oracle Client tools
2. Err: ORA -12154: TNS: Could not resolve teh connect identifier specified
Sol: Then I point out the TNS file
3. Now I coonect the Oracle db . I go to Connection Manager . Specifies the provide as: Native OLE DB Oracle Provide for OLE DB, Select my DB, provide teh user name and password. and check if the connection passed.
Then in my data Flow Task when I add this source and check the Colmns its gives me an error./ sort of warning
The component reported the following warnings:
Warning at {C947B.......} [Ole DB Source[1]]: Cannot retrieve the column code page info from the OLE DB provider. if the components supports teh "DefaultCodePage" property, the code page from that property will be used.....
Will this warning has an significance. i dont see any error in my output data. but is there something I m doing wrong.
4. When I set my ProtectionLevel under Security in package property to "Dont Save Sensitive" in order to easily configure the package I m getting this error: failed Validation. The default one was EncryptSensitiveWithUserKey then its running smoothly.
Can somebody advice me on this?
I addded the all the errors and solution for 1 and 2 becuase in that way this will be helpful in future.
View 5 Replies
ADVERTISEMENT
Sep 13, 2006
help - I€™ve been stuck on this for days.
My software vendor limits the sessions to one (1) per log-in to Oracle 9i and I€™m having tons of problems trying to extract data through an SSIS package. Everytime I run the package SSIS already logged in and the OLE DB source fails because of the sessions exceeded error.
Is there any way to limit the connection to just when I need the data to pump across on the OLE DB source?
Thank you very much for any help.
Regads,
Nestor
View 1 Replies
View Related
Jan 2, 2007
I have an issue when using Report Manager for viewing reports that use a certain Oracle data source. When viewing the reports in Report Designer the reports display without problems. But when trying to display the reports with Report Manager, after deploying the reports to the Report Server, I now get the following error message:
blablabla....ORA-12705: invalid or unknown NLS parameter value specified
For testing purposes I am running Report Designer, Report Server and Report Manager locally on a PC with Windows XP. I am using Reporting Services 2005, IIS 6, Visual Studio 2005, an Oracle 9.x client and an Oracle 9.x (not 100% sure) database that is hosted on a remote server.
Earlier I got an error message that stated "ORA-12154: TNS: could not resolve the connect identifier specified". Access rights to some Oracle folders for the Network service account did the trick here but then I got the "NLS parameter" error message. What I have tried to do is removing the NLS_LANG register variable and also modified the value of the variable so that it matches the value of the NLS_LANG variable on the server that hosts the Oracle database, but none of them have worked. Any ideas?
Maybe this is an issue that is more appropriate in an Oracle forum but what the heck..the problem could reside in Reporting Services..
Thanks, Stefan
View 1 Replies
View Related
Sep 10, 2007
Hello All
I was trying to configure my package. I have a Oracle 10g DB as source. I used "Oracle provider for OLE Db" as provider in connection manager. I entered user name and password.
When I set my package protection level to : DontSaveSensitive and executed the package
it gives me this error:
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01005: null password given; logon denied".
When i go back to connection manager I see the blank password. I retype it but again when I execute I get the above error.
I configured the package with same setting and in the config file I mentioned the passwords and all details but again I when I execute the package i get the below error:
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Since it was not storing password OR not executing without password I set the Protection Level to : "EncryptAllWithPassword"
and excute it I works Great. and runs Awesome. Except I get this Warning
[OLE DB Source [1]] Warning: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
Question 1: "CAN I IGNORE THIS WARNING?'
Question2: "THE PACKAGE RUNS GOOD WHEN I SET THE PROTECTIONLEVEL =EncryptAllWithPassword. With this settings when i configure my package it gives me error. Why is it so Any Help please Below plz find the config file?"
[OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "WDEV.wuser1" failed with error code 0xC0202009.
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
x<?xml version="1.0" ?>
- <DTSConfiguration>
- <DTSConfigurationHeading>
<DTSConfigurationFileInfo GeneratedBy="AWM" GeneratedFromPackageName="Package1" GeneratedFromPackageID="{289810A-ASD0-4698-BAC5-3270D3E5D17D}" GeneratedDate="9/9/2007 10:18:10 PM" />
</DTSConfigurationHeading>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>Provider=OraOLEDB.Oracle.1;Data Source=WDEV;User ID=wuser;Password:XYZ;</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.ccuser1].Properties[InitialCatalog]" ValueType="String">
<ConfiguredValue />
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[Name]" ValueType="String">
<ConfiguredValue>WDEV.wuser1</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[Password]" ValueType="String">
XYZ<ConfiguredValue />
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[ServerName]" ValueType="String">
<ConfiguredValue>WDEV</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[UserName]" ValueType="String">
<ConfiguredValue>wuser</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Properties[PackagePassword]" ValueType="String">
<ConfiguredValue /> AWM
</Configuration>
</DTSConfiguration>
Thanks a lots
View 2 Replies
View Related
Mar 4, 2008
Hi,
I have several oracle reports which running in SharePoint Integrated mode. They were working well when the SharePoint server and report server in same machine. But after that the report server move out to another machine, we got the problem with connection to oracle databasen. Reports with Sql server as data source has no problem at all.
We have installa both oracle client and odp.net in both machines, and tried to give Network Service full access right in
Bin catalog in oracle client but nothing helps. Please help!!!!!
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'Ellentst'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
In log file:
Cannot create a connection to data source 'DatabasName'. ---> System.Exception: System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
We have installed oracle client version 10.2.0 in both machine.
View 2 Replies
View Related
Nov 14, 2006
Hi,
I have my datasource in Oracle9i and destination is Sql2005. I am connecting to Oracle 9i through OLEDb provider and when I connect to my DataSource using OLE DB Data Source, I get the following error:
Warning at "guid code": Cannot retreive the column code page info from the oledb provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale Id will be used.
Could anyone please help me trouble shoot this problem.
Regards,
Sudhakara.T.P.
sudhakaratp@hotmail.com
View 3 Replies
View Related
Jun 22, 2006
I have a Rounding error: Between flat file connection manager Source & OLE DB Connection Destination (SQL Server 2005) in my Dataflow.
File looks like this lets call column names Col A,B,C,D
70410000 RD1 1223631.92 196042.42
70329000 ICD 11025.84 3353.88
71167300 COL 104270.59 24676.96
flat file connection manager settings: first row Column names then Advanced tab Col A float , Col B float , Col C string ,Col D float ,
OLE DB Connection Destination (SQL Server 2005)
CREATE TABLE [dbo].[PT_CUST_ABR](
[PARTY_NO] [float] NULL,
[PARTY_NAME] [varchar](75) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[TELECOMABR] [float] NULL,
[GENIABR] [float] NULL,
Problem: ColA (Source) Rounding error to PARTY_NO (Destination)
I have a field of text of in a flat file that the flat file connection manager Source picks up correctly €œ70000893€?
However when it gets the OLE DB Connection Destination the data has changed to 70000896. That€™s before its even Written to the database.
The only clue that something is wrong in the middle is the great Data viewer shows the number as 7.000009E+07
Other clues looking at the data it appears there is a rounding error on only the number that dont end in 00
ColA (Source) PARTY_NO (Destination)
71167300 71167296
70329000 70329000
70410000 70410000
Any ideas people?
Thanks in advance
Dave
View 3 Replies
View Related
Feb 6, 2007
While upgrading several packages from DTS 2000 to SSIS I came across a couple of packages where the source data comes from an Oracle DB. Until now I have not migrated data from an Oracle source.
When I tried to create a new connection I got the error:
"System.Data.Oracle client requires Oracle client software version 8.1.7 or greater."
This is being developed on a machine that would not have any oracle drivers before now, so I THOUGHT it would be as simple as downloading the drivers, but the resolution seems to be much more complex than that. When I researched it, it appeared that I needed to download the Oracle 9i software. The installation is about 10 GB and this seemed like overkill to just be able to connect to a database.
Is this in fact the correct solution? If so, or even if not, can I get a quick run down of the steps involved, and anyone's experience (problems, etc..) on the topic?
View 5 Replies
View Related
Feb 28, 2008
Hi All:
I have a SSIS which have a main connection to a SQL Server 2005 DB, and also another connection to a Oracle database, and fetch data from the Oracle db.
I have the 2 connection managers, and everything runs fine when I test it in dev studio.
However, once I imported it to the DB, and run it on command line, I get the "Class not registered" error.
Log file as follows:
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:23:53 PM
Info: 2008-02-28 13:23:53.91
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_SOURCE";".
End Info
Info: 2008-02-28 13:23:54.03
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_USER";".
End Info
Info: 2008-02-28 13:23:54.05
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_PWD";".
End Info
Error: 2008-02-28 13:23:54.55
Code: 0xC0202009
Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-02-28 13:23:54.56
Code: 0xC00291EC
Source: Execute SQL Task Execute SQL Task
Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection.
End Error
Warning: 2008-02-28 13:23:54.58
Code: 0x80019002
Source: CRDA_D_GIM_CONN_TEST
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 1:23:53 PM
Finished: 1:23:54 PM
Elapsed: 1.547 seconds
I DID TRIED MY BEST to search before posting, and most of them are having problem with 32 bit and 64 bit executions.
However, in my case, both are 32 bit (as shown in the log file).
In the above test, I'm setting DoNotSaveSensitiveData, and then fetch it with package configuration.
To make sure the package configuration is not creating pblm for me, I also tried to hardcode everything in the package, and then encrypt the whole ssis with password, and run the package with the /DECRYPT option, so that everything is already intact.
But I still get the same error. Log file as follows.
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /De "painful" /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 2:24:25 PM
Error: 2008-02-28 14:24:27.11
Code: 0xC0202009
Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-02-28 14:24:27.14
Code: 0xC00291EC
Source: Execute SQL Task Execute SQL Task
Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection.
End Error
Warning: 2008-02-28 14:24:27.14
Code: 0x80019002
Source: CRDA_D_GIM_CONN_TEST
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:24:25 PM
Finished: 2:24:27 PM
Elapsed: 1.422 seconds
Can anyone suggest what is missing ?? or what can be done ??
Any pointers are greatly appreciated.
Thanks,
- Henry.
View 18 Replies
View Related
Apr 22, 2008
Hi,
I have setup SSRS with 3 data models using 3 different datasources on one server. I can create reports ok, but if any of the other users I want to access these reports tries to open the report I created or run there own reports (they can create a report), it gives them the error:
Report Execution Error
Cannot create a connection to the data source 'datasource1'
I do not recieve this error, but the other users do. I have set the other users as System administrator in the site-wide permissions, so they have access to everything.
Everything is set to integrated windows authentication.
On the Reporting Server Configuration Manager, the Unattended Execution Account is not selected and is blank.
What could cause these users not to be able to run existing or new reports they create?
Thanks for any help,
Steve
View 1 Replies
View Related
Apr 14, 2008
Hi SSIsians,
I have a package with Excel Destination with dynamic connection.
I did ExcelFilePath = [@user::VarSourceFolder]+[@user::VarSourceFileName]
then i changed the Delayvalidation = True.
When i try to run the package in BIDS it gives the error.
ERROR:
[Excel Source [30501]] Error: An OLE DB error has occurred. Error code: 0x80040E37.
[Excel Source [30501]] Error: Opening a rowset for "DailySheet" failed. Check that the object exists in the database.
It saying there is no sheet in the name of "DailySheet" but when i removed the expression in connection manager property it is working fine.
Please let me know what is the problem OR how to configure the dynamic connection in ExcelSource.
Thanks
Thiru
SE - SSIS
Chennai
View 5 Replies
View Related
Mar 14, 2007
Hello all.
I upgraded a SQL 2000 installation to SQL 2005 this past weekend. Minimal issues overall, but one that did crop up relates to a linked server to an Oracle database. The linked server worked before the upgrade, and stopped working immediately after.
We're running on Windows 2003 x64, latest service pack. The linked server is set up using the MSDAORA provider. The error I'm getting post-upgrade is:
=====================
OLE DB provider "MSDAORA" for linked server "PROD" returned message "ORA-06413: Connection not open.".
Msg 7303, Level 16, State 1, Procedure RDM_GET_REP_LIST_SP, Line 12
Cannot initialize the data source object of OLE DB provider "MSDAORA" for linked server "PROD".
=====================
A tnsping from the server works fine. I've also tried recreating the linked server. Any help would be appreciated. Let me know what other information would be useful.
Thanks,
Adam
View 3 Replies
View Related
Oct 10, 2007
Hi,
I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:
Message
Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.
I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job. I've four posts regarding this error message on the MSDN forums that aren't helpful at this moment - I'm hoping that someone will have found a solution since those posts. Any suggestions are welcomed.
Thanks for your help!
Sue
View 14 Replies
View Related
Jan 13, 2006
Synopsis:
Attempting to create a data flow task to copy data from AS/400 (DB2) to SQL2005, using an existing System DSN ODBC connection defined on the SQL2005 host.
Problem:
When adding the DataReader Source component to the package, I cannot assign the Connection Manager. Designer issues the error message:
"The runtime connection manager with the ID "" cannot be found. Verify that the connection manager collection has a connection manager with that ID."
Editing the DataReaderSrc component shows only one row under the Connection Managers tab:
Name=IDbConnection
Connection Manager=blank
Description=Managed connection manager
The datareadersrc component editor displays the warning message: "Not all connection managers have been set. Set all connection managers.". Clicking the Refresh button causes the error message to be displayed "The runtime connection manager with the ID "" cannot be found. Verify that the connection manager collection has a connection manager with that ID."
I am prevented from assigning my Connection Manager object the DataReaderSrc.
The package already contains one Connect Manager object:
Provider: .Net Providers/Odbc Data Provider
System DSN
Test Connection operation succeeds
Any help would be appreciated.
Fraser.
View 3 Replies
View Related
Mar 1, 2008
Hopefully there's an easy answer for this. I'm totally new to SQL server and I'm trying to upsize an Access database. Whether I use the upsizing wizard or try to create a data source through the ODBC Data Source Administrator, I get a connection failed error. It tells me the server does not exist or my login is incorrect. I'm using NT authentication to connect to the server on my local drive. I just installed the whole 2005 express edition and the only thing that came up during the install was that I didn't have IIS installed. I didn't see how that would be relevant, so I went ahead with the install.
Shouldn't this work with the default setup? I've searched around trying different "solutions" although I doubt they were specifically related to this very basic problem. I tried giving my login every right I could find through in the database engine properties in the server management studio, which connects fine itself with just my network login name and no password. What am I missing?
View 3 Replies
View Related
Feb 22, 2006
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
View 17 Replies
View Related
Aug 16, 2011
We are running Reporting Services 2008 R2 on a Windows Server 2008 Standard 64-Bit server. I have a user that has full access to Reporting Services at all folder levels but IS NOT a local administrator on the 2008 server.
This user can create data source connections but when he tries to test the connection by clicking on the 'Test Connection' button, he gets the following error "The permissions granted to user <username> are insufficient for performing this operation.A user that has administrator priveleges on the server can test the connection fine.Â
I don't want to make this user an administrator on the server.Â
This is an extract from the log file:
ibrary!ReportServer_0-24!3478!08/16/2011-13:45:37:: Call to TestConnectForDataSourceDefinitionAction().
library!ReportServer_0-24!3478!08/16/2011-13:45:37:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: , Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user <username>
are insufficient for performing this operation.;
[code]....
View 10 Replies
View Related
Feb 23, 2008
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
View 3 Replies
View Related
Jan 12, 2006
Hi,
I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client 10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was ok.
from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->
the oracle publisher is displayed in the list of publisher but when press ok i got the following error :
TITLE: Distributor Properties
------------------------------
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient.
Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any idea about this error ?
Thanks
Tarek Ghazali
SQL Server MVP.
View 2 Replies
View Related
Sep 7, 2006
Currently, I am working SSIS project that its data source from ORACLE 9i. I installed full SSIS in server and also ORACLE. So, I have three connections available in server. They are the following below.
Oracle Client
Microsoft OLE DB Provider for Oracle
Oracle Provider for OLE DB
The problem is the three component can not recognize parameterization and ORACLE store procedures.
Finally, I executed the store procedures by ORACLE package from command prompt (bat files). So, the command execute from SSIS package.
Ashari Imamddin
View 1 Replies
View Related
Mar 30, 2007
Hello,
I've created a SSIS Solution and have created Data Sources. I have two packages. One was created before the Data Sources, and one was created after. The package that was created after is using connections from the Data Sources. I want to change the package before the Data Soruces were created to use them, but when I right click in the Connection Managers pane "New Connection From Data Source.." is not an option.
Did I not add it to the Solution properly?
How do I get it to show?
Did I not refresh something?
Please provide the how if you figure it out.
Thanks
View 4 Replies
View Related
Jan 4, 2006
I came across something strange today. I was wondering I was doing something wrong.
View 7 Replies
View Related
Jun 12, 2007
wondering if someone can share their wisdom about getting record count from Source Oracle DB using SSIS?
View 5 Replies
View Related
Mar 16, 2007
Guys,
I am having a nightmarish time getting an Oracle Connection Manager working as a source in my SSIS package.
The CM is called "OLTP_SOURCE". When I inspect the configuration and test connection, it succeeds, however when I go to run the package (both in debug mode and via DTEXECUI) I get the following error:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
After this happens, if I go into an OLE DB Source within a DFT, I get the following:
No disconnected record set is available for the specified SQL statement.
Now, if I go back into the CM, enter the password and test, it succeeds. From this point, I will go to preview the data in the OLE DB Source, and it comes back fine. However, when I go to run the package, I get the same error time and time again:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
The quick reader will suggest that the password is not being persisted. To this end, I have tried each of the following techniques to no avail:
1. Double, Triple and Quadruple check that the "save" password option in the CM is checked.
2. Hardcode the connection string in the dtsx XML-behind.
3. Enable Package Configurations and hardcode the connection string in the dstsconfig file.
4. Run the dtsx file using DTEXECUI, providing it with the configuration (that includes the hard-coded password).
5. Run the dtsx file using DTEXECUI, providing it the connection string in the Connection Managager override UI.
Can anyone help shed some light on what might be going on? So far, it is obvious that there has to be something that I am doing wrong because (syntax dialect differences aside) I can't imagine that Oracle sources should be this much of a headache.
Thanks,
Rick
View 3 Replies
View Related
Jun 13, 2007
Dear Sir,
We met a problem when we move on Oracle 10g from Oracle 9i in the loading process. The scenario is that SQL Server as Data Warehouse, SSIS as ETL tool. But the length of string column as data source table in SSIS grows up 4 times when using Oracle 10g. For example, ABC table x varchar2(8) --> x varchar(32) -->x varchar(8) --> x varchar(8) {Oracle 10g SSIS(source) SSIS(target) SQL Server}
This doesn€™t influence the loaded result (I did not find any problem until now), but that influence loading performance and we worry about potential problems.
Do you have any idea or have you met the same problem before?
Thanks,
Jacob
View 5 Replies
View Related
Apr 24, 2007
Hi,
I need to get recordset returned by oracle sp in execute sql task to process futher in For Each Loop container and on same lines i want to use oracle sp for extraction data in Data Flow Task. Could anybody suggest if it how we could do it in SSIS?
All suggestions will be highly appreciated.
Thanks,
Lalit
View 3 Replies
View Related
Sep 3, 2007
Hi,
I'm new to SSRS but have a problem connecting to Oracle. I have placed my reports upon a reporting server but the shared data connection isn't working and I'm confused as to why. I have specified the name, connection type as "Oracle", set the correct user id and password for the credentials and the connection string as for example 'Data Source=oracleExample;Unicode="True"'. I also have set the correct entry in the tnsnames.ora file for this datasource, example:
"oracleExample =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 12.23.45.23)(PORT = 3425))
)
(CONNECT_DATA =
(SID = oracle)
)
)"
Unfortunately I receive the following error when trying to connect.
"
An error has occurred during report processing.
Cannot create a connection to data source 'oracleDataSource'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
"
I'm mystified as to what the issue is. Any ideas? Would restarting the report server pick up the tnsnames.ora file? I have this working locally using report designer.
Any help, much appreciated.
View 1 Replies
View Related
Feb 12, 2008
I'm attempting to use SSRS (2005) with my Oracle RDB database (old DEC RDB), using an ODBC driver. I am able to create a report, and view data, but I need to add some report parameters to filter the data. When I attempt to use parameters in the query, I either get a syntax error, or a message that my odbc connection cannot use "named" parameters, and that I should use "unnamed" parameters.
Here is a snippet of my sql query:
SELECT Application_Notes.Lease_Application, Application_Notes.Followup_Code,
<...>
FROM
Application_Notes Join
<...>
WHERE
(Application_Notes.Tickler_date >= {ts '2008-02-08 00:00:00'} AND
Application_Notes.Tickler_Date < {ts '2008-02-09 00:00:00'} )
The "Tickler_Date" field is a binary date field. The above syntax is pulled from a Crystal Report, which I am considering moving over to SSRS. Ideally, I would like the user to enter a single RunDate parameter, and have the query do the following:
Where (Application_Notes.Tickler_Date >= @RunDate and
Application_Notes.Tickler_Date < (@RunDate + 1 day) )
If the user has to enter two dates, that will be fine, but I can't seem to get past the errors.
Thanks,
Paul
View 6 Replies
View Related
Jul 20, 2007
What could be simpler: map a flat file record structure, extract the data, and populate essentially the same flat file record struc in an Oracle table. Let the fun begin.
Specifically: the flat file record struc is fixed length 196 bytes. A particular field consists of 4 bytes of Integer data; IS deals very nicely with the definition, does not appear to be any issue with that. The issue is trying to get the 4 bytes of integer to map and load into the Oracle table. The data type in the flat file def is DT_UI4. The data type in the Oracle target is DT_NUMERIC. One would think that perhaps a simple transform and Viola?! I've defined the transform but does not seem to matter - whatever I try yeilds the same results.
I 've tried many different src/trg data type defs., but all yeild the same results.
Execution Results from debug:
Everything validates and then...
[kcd [8671]] Error: Data conversion failed. The data conversion for column "load_time_min" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[kcd [8671]] Error: The "output column "load_time_min" (11050)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "load_time_min" (11050)" specifies failure on error. An error occurred on the specified object of the specified component.
Any ideas appreciated!
Thanks.
View 1 Replies
View Related
Aug 22, 2007
Hello Everyone,
Please do inform me, how can I check if there is a new record or changed record from the source.
NOTE: my source is Flat File and destination is Oracle Table.
What is needed from my side is the history load (Type 2).
This is not possible thru SCD component in Integration Services, If my source is Oracle (Even after I had added the parameters in my OLE DB)
Please do inform me about this process. Very important.
Thank you
View 1 Replies
View Related
Jul 5, 2006
Provider cannot derive parameter information and SetParameterInfo has not been called. (Microsoft OLE DB Provider for Oracle)
I am getting the above error while opening the parameter box at OLEDB source for Oracle using SQL command option at Data Access Mode?? Can you any one please help me in this regard and trouble shoot this problem..
View 8 Replies
View Related
Jul 13, 2007
My source files are in C:Process folder. File names are in the format proc*.csv
I am using foreach loop container to iterate over the files in folder "C:Process"
I have a user variable "filename"
The order of my tasks
ForEach - Data Flow task - File System Task
In Data Flow task, I have ole db source which should take the dynamic filename from user variable "filename". whats happening is when i give fixed filename, without foreach loop container the package is working fine.
with dynamic filename, I am not able to run the package because of ole db source Error - cannot aquire connection from connection manager.
Thanks for u'r help.
View 9 Replies
View Related
Mar 14, 2008
My application which ran perfectly well yesterday suddenly stopped working in this morning with following error message. I didn't change anything, at least I believe. Interesting thing is that I don't use any Oracle connection but connects to MS SQL Server 2005 Express version locally. Error messages are different according to the connection string though I don't think it makes difference:
ConnectionString = <add key="Databasehandtool1" value="Data Source=.SQLEXPRESS;Database=handtool;SSPI=true" />ErrorMessage from VS2008 ="Unable to get records. Object reference not set to an instance of an object."
ConnectionString = <add key="Databasehandtool1" value="Data Source=.SQLEXPRESS;Database=handtool;User Id=handtool_DB;Password=mypassword" />ErrorMessage from VS2008 = "Unable to get records. Unable to connect to database. ORA-12154: TNS:could not resolve the connect identifier specified." By the way, the application was generated from IronSpeed 5.1 Enterprise. My development environment is : VS2008, SQL2005 EXPRESS, Windows XP SP2, ASP.NET 2.0
We have actually an Oracle server in the network though. My gut feeling is that something might have changed in my network server during the night but how come it can possibly affect my application running on my local PC. I checked the connection of local SQL Express Server from SQL Server Management Studio and it connected well with UserID=handtoo_DB and showed all tables and stored procedures required for the application. So there is no problem in SQL Server database side.
I would welcome and appreciate any input.
fudata
View 1 Replies
View Related