Oracle View Returns ORA-01403: No Data Found
Jul 13, 2007
I am trying to get data from an Oracle view using an OLE DB data source and a "SQL Command". When I "preview" the data it looks fine, but when I execute the package I get the following error:
Error: 0xC0202009 at Data Flow Task, CEDAR View [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01403: no data found".
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "CEDAR View" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
View 3 Replies
ADVERTISEMENT
Oct 3, 2014
I am running this on a development server and it fails, OLE DB provider "OraOLEDB.Oracle" for linked server "ZEZASQL" returned message "ORA-01403: no data found".but it runs fine and returns data on production? both servers are SQL Server 2008 R2. Could the version of Oracle have any baring? 11.02.00.01 vs 11.02.00.03
SELECT ad.CandID, ad.PlcID, am.EvalInterval, am.ReminderDate, am.DatePosted,
c.SUPERVISORID, SUPERVISORFIRSTNAME, SUPERVISORLASTNAME,
CANDIDATEID, CANDIDATEFIRSTNAME, CANDIDATELASTNAME,
ACCOUNTMANAGERID, ACCOUNTMANAGERFIRSTNAME, ACCOUNTMANAGERLASTNAME,
COMPANYNAME, COMPANYLOCATIONDESCRIPTION, ed.CreatorID--, ISNULL(Score,0) AS Score
[code]....
View 0 Replies
View Related
Jul 24, 2012
Write a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.
This is what I have so far,
CREATE VIEW InvoiceBasic AS
SELECT VendorName, InvoiceNumber, InvoiceTotal
From Vendors JOIN Invoices
ON Vendors.VendorID = Invoices.VendorID
[code]...
View 2 Replies
View Related
Apr 30, 2015
I have a subset of data whose source of truth resides in an Oracle Database. Can I define a SQL Server View to retrieve this subset of data and make it available on the SQL Server side for say Reporting and SSRS? I think I also saw where they tend to prefer User-Defined functions as opposed to a view.
If I define the view using an OPENQUERY, I have noticed that it seems to run FOREVER on the SQL Server side and returns pretty timely if I run in Oracle SQL Developer. Is there anything I can tweak to improve this timeliness or lack there of? And the whole reason I'd like to create a view of this Oracle data is so that I can take advantage of all the views and functions that we have created on the SQL Server side.
View 4 Replies
View Related
Oct 14, 2007
I just installed Sql Server Reporting Services 2005 on a Windows Server 2003 R2 x64 server. I configured Reporting Services through the Reporting Services Configuration tool and everything has a green checkmark.
I'm trying to connect to the webservice, but keep getting 404 not found errors. I've tried putting the following into a web browser and all return a 404 error:
http://msql01/reports/
http://msql01/reportserver/
http://msql01/reportserver/reportservice.asmx?wsdl
http://msql01/reportserver/reportservice2005.asmx?wsdl
I've tried edting the RSWebApplication.config file using the following configurations (restarting IIS afterwards) without any luck:
<UI>
<ReportServerUrl></ReportServerUrl>
<ReportServerVirtualDirectory>ReportServer</ReportServerVirtualDirectory>
<ReportBuilderTrustLevel>FullTrust</ReportBuilderTrustLevel>
</UI>
and
<UI>
<ReportServerUrl>http://msql01/ReportServer/</ReportServerUrl>
<ReportServerVirtualDirectory></ReportServerVirtualDirectory>
<ReportBuilderTrustLevel>FullTrust</ReportBuilderTrustLevel>
</UI>
Any help is appreciated!
Thanks,
Rob
View 10 Replies
View Related
Jan 19, 2015
I have a simple query that joins a largeish fact table (3 million rows) to a view that returns 120 rows. The SKEY in the view is returned via a scalar function. The view returns instantly if queried on it's own however when joined to the fact table in the simple query below results in a query execution plan that runs forever. Interestingly if I change the INNER JOIN to a LEFT OUTER JOIN the query returns the matched results almost instantly.
Select
Dimension.Age_Band.[10_Year_Age_Band],
Count(*)
From
Fact.APC_Episodes
Inner Join Dimension.Age_Band ON
Fact.APC_Episodes.AGE_BAND_SKEY = Age_Band.AGE_BAND_SKEY
Group By
Dimension.Age_Band.[10_Year_Age_Band]
I know joining to a view using a column generated by a scalar function is not a good recipe for performance. I also know that I could fix this by populating a physical table with the view first as I have already tested this though I hoping not to have to go down that route.
Why a LEFT OUTER JOIN works and not an INNER JOIN or anyway I can get the query optimizer to generate an execution plan that works?
View 9 Replies
View Related
Feb 7, 2007
I have a complex view in my sql 2005 database.
The view returns a column that could be null (as the result of a left outer join).
The coulmn that is returned is an integer.
Everything works fine if I run the view from SQL 2005 Management Studio.
My column value is always null if I use ADO.NET's SqlAdapter to return a DataTable.
Has anybody seen this behaviour before?
Any help appreciated.
Regards,
Paul.
View 2 Replies
View Related
Jul 8, 2015
I renamed a database table, and then try to create a view with that table. However, the renamed table does not appear in view designer. I have to close and re-open SQL Server Management studio 2014.
View 5 Replies
View Related
May 8, 2015
we recently got a scenario that we need to get the data from oracle tables which is installed on third party servers. we have sqlserver installed on ourservers. so they have created a DBLINK in oracle server to our sqlserver and published the DBLINK name.
what are the next steps that i need to follow on my sqlserver in order to access the oracle tables ?
View 2 Replies
View Related
Mar 1, 2005
I have been asked to include a view from our Oracle system in one of my SQL queries. As a programmer I can write querries all day long, but I have no administration skills.
Can someone just give me the basics on creating this ability? On my development system I have installed the Oracle client and configured an ODBC driver that points to the Oracle views. This has allowed me to create a linked table in Access, but I have never attempted to port this to SQL Server 2k.
I assume I just load the drivers on the production system as before, but do I then use an ODBC driver again, or is there a better method with SQL Server? If its the ODBC method, then how do I add a linked table in SQL?
Sorry for the basic questions, and I really appreciate any help.
Thansks,
Rob
View 3 Replies
View Related
Aug 5, 2002
Is there a way to view the Oracle (8i) databaes, tables and data in SQL 2000 without physically importing those the tables ?
Thanks,
Scott
View 1 Replies
View Related
Feb 26, 2008
Hi,I have created a linked server to oracle, which works fine.But when I try and create a view joining the SQL table with the linked Oracle table, it only returns the primary key field in the Oracle table and nothing else.Anyone know why?ThanksN.B. I'm using SQL Server 2005 btw.
View 2 Replies
View Related
Jul 20, 2005
Hi,In our environment a database view is based on columns in a table from anoracle database.This is a linked server I believe.I am told that since we use this construction no where clause is possible.So we get to many rows in our database which we have to filter later on.How can we do this differently ?? Since it takes a lot of time to go throughthis process.Bye,Arno de Jong, The Netherlands.
View 2 Replies
View Related
Jun 20, 2006
Hi
I have a number of scripts that run against an oracle server to retreive data to manipulate before populating a sqlserver database. I am connecting using an Odbc connection and using the DataReader Source to read from the Oracle table. It all seems to work ok.
When I have tried to extract data from an Oracle view in the same way it doesn't seem to work. The error message mentioned the PrimeOutput() method and error code 0xC02090F5. The view is very big so is it possible that the connection simply timed out?
Any ideas?
Thanks
B
View 6 Replies
View Related
Aug 9, 2000
Any idea on how I do this?
Any advice welcome.........
View 1 Replies
View Related
Sep 6, 2007
Hi,
I was able to link SQL Server Express to Oracle views using Linked Manager. However, when I run the query, the performance is very slow.
Is there a way to improve performance in querying?
Previously I was using Access to link to Oracle view. But the performance is not good. Takes about 8 hours for approx 6000 records.
Thanks a lot,
Stara
View 3 Replies
View Related
Jul 6, 2005
Hi all,
My Problem is Hoe the Stored Procedure returns data to the Calling Env.If it is fieds values then we can use the OUT Parameters.In Case of My SP returns more number of rows .Then how we capture the data and returs to the Calling Env.i know that we can use the Cursors in Oracle but how is it in SQLSERVER???????pls
pls Help me throw some samll exps.Any help Really appriciate..ThaksRams
View 2 Replies
View Related
Jun 28, 2006
SQLserver on Small Business Server for Win 2003.Client application updates records in DB. i.e. the content of a field isupdated from "First" to "Second"Client application closed and opend again. DB returns value "Second".Next morning _SOME_ - not all - of the updates seems missing. DB returnsthe value "First"The client software has run for years i several thousand installations,with MSDE/SQLserver on w2k and 2003 servers.This is the first time we have seen this spooky behavior. And it is thefirst time we are targeting SBS.Could there be some unflushed cache between client and SQLserver?Poul Petersen
View 1 Replies
View Related
Sep 7, 2007
I have a table which has a row that contains a subreport. I'd like to set the visibility of the row to hidden if the subreport returns no data. I've played with a few techniques but can't seem to get it right. Any ideas?
View 1 Replies
View Related
Dec 13, 2007
I have a stored procedure
Code Block
CREATE PROCEDURE WEA_SelectEmployeeListByCourseOrProject
@ProjectID int,
@CourseID int,
@blnIsSearch int,
@strUserName nvarchar(20)
AS
SET CONCAT_NULL_YIELDS_NULL OFF
DECLARE @strRole nvarchar(15),
@ContactID int
SELECT @strRole = Role, @ContactID = ContactID FROM Contact WHERE UserName = @strUserName
Select DISTINCT Contact.ContactID ID, UPPER(Surname + 'gd ' + Forename ) AS Description, UPPER(Surname + ' ' + Forename + ' ' + ContactReference) AS Description_CR
, UPPER(ISNULL(ContactReference,'')) ContactReference
FROM Contact
LEFT JOIN AssignedEmployee on Contact.ContactID = AssignedEmployee.ContactID
WHERE RUEmployee=1
AND
( ((@CourseID = 0 AND @blnIsSearch=1 ) OR COALESCE(AssignedEmployee.CourseID,0) = @CourseID))
AND
(@ProjectID = 0 OR COALESCE(AssignedEmployee.ProjectID,0) = @ProjectID)
AND
(
(@strRole = 'MIS_TUTOR' AND
(AssignedEmployee.ContactID = @ContactID
OR CourseID IN (SELECT CourseID FROM AssignedEmployee WHERE ContactID = @ContactID AND Lead = 1)
OR AssignedEmployee.ProjectID IN (SELECT ProjectID FROM AssignedEmployee WHERE CourseID IS NULL AND Lead = 1 AND ContactID = @ContactID))
)
OR
(@strRole <> 'MIS_TUTOR')
)
SET CONCAT_NULL_YIELDS_NULL ON
GO
now if i run this stored procedure in Query Analyzer like so...
exec wea_SelectEmployeeListByCourseOrProject 0,0,1,'K_T'
i get 48 records returned.
but if i lift the SQL out of the stored procedure and run it in Query Analyzer like so....
Code Block
SET CONCAT_NULL_YIELDS_NULL OFF
DECLARE @ProjectID int,
@CourseID int,
@blnIsSearch int,
@strUserName nvarchar(20)
SET @ProjectID = 0
SET @CourseID = 0
SET @blnIsSearch = 1
SET @strUserName = 'K_T'
DECLARE @Role nvarchar(15),
@ContactID int
SELECT @Role = Role, @ContactID = ContactID FROM Contact WHERE UserName = @strUserName
PRINT @ContactID
Select DISTINCT Contact.ContactID ID, UPPER(Surname + ' ' + Forename ) AS Description, UPPER(Surname + ' ' + Forename + ' ' + ContactReference) AS Description_CR
, UPPER(ISNULL(ContactReference,'')) ContactReference
FROM Contact
LEFT JOIN AssignedEmployee on Contact.ContactID = AssignedEmployee.ContactID
WHERE RUEmployee=1
AND
( ((@CourseID = 0 AND @blnIsSearch=1 ) OR COALESCE(AssignedEmployee.CourseID,0) = @CourseID)) -- the above line was modified to make sure only employees explicitly assigned to a project are brought back. unless it's a search
AND
(@ProjectID = 0 OR COALESCE(AssignedEmployee.ProjectID,0) = @ProjectID)
AND
(
(@Role = 'MIS_TUTOR'
AND ( (AssignedEmployee.ContactID = @ContactID OR CourseID IN (SELECT CourseID FROM AssignedEmployee WHERE ContactID = @ContactID AND Lead = 1)))
OR
AssignedEmployee.ProjectID IN (SELECT ProjectID FROM AssignedEmployee WHERE CourseID IS NULL AND Lead = 1 AND ContactID = @ContactID)
)
OR
(@Role <> 'MIS_TUTOR')
)
SET CONCAT_NULL_YIELDS_NULL ON
i only get 5 records returned???
so why do i get a difference when its the same SQL??
Username 'K_T' is of role 'MIS_TUTOR' therefore @Role = 'MIS_TUTOR'
any help on unravelling this mystery is appreciated!
Cheers,
Craig
View 5 Replies
View Related
May 24, 2001
I'm working with PivotTable on Excel 2000 which is connected to an OLAP server (from SQL Server 7 installation). The pivot is intended to analyze Sales during April 2001. Yesterday I found out that OLAP/Excel returned/displayed inconsistent data. The 'April Total' value is NOT equal to the 'Quarter 2 Total' (I already inspected the underlying database and sure that there is absolutely NO data for months after April 2001). The value for 'April Total' is the correct one. I'm not sure whether the problem resides on the OLAP Server or Excel (pivot) itself. For ones who like to help me I would be glad to supply you with the screenshots (just email me).
Please help.
Regards
Dave
View 1 Replies
View Related
Jun 6, 2007
I am migrating from 2000 to 2005 and in the process of rewriting DTS to SSIS. So far so good.
I have an import of a flat file that I need to reproduce that works fine in DTS but throws SSIS.
The file contains details of products, and has a Long Description field that may contain lots of different chars - CR & LF amongst them. It's source and destination columns are Text type.
The file is tab delimited, text delimited with double quotes, with row delimiters of CRLF and column names on row 1.
The error SSIS throws is "The column delimiter for column "LongDescription" was not found"
I imagine (perhaps wrongly) that this is because of the extra CRLFs but it worked fine in DTS. It also previews fine, and lets me define the column properties OK in SSIS package designer.
Any help greatly appreciated. I am trying to avoid the obvious thing of replacing those chars in that field at this point as currently the export is shared between a live production server, and my test 2005 rig.
Thanks v much.
Chris.
View 1 Replies
View Related
Sep 12, 2006
Hi,
The test.sql scripts I write to test CLR stored procedures run successfully, but when I want to display the resulting data in the database with a simple "SELECT * from Employee"
I get the result as:
Name Address
---- -------
No rows affected.
(1 row(s) returned)
But not the actual row is displayed whereas I would expect to see something like:
Name Address
---- -------
John Doe
No rows affected.
(1 row(s) returned)
I have another database project where doing the same thing displays the row information but there doesn't seem to be a lot different between the two.
Why no results in first case?
Thanks,
Bahadir
View 1 Replies
View Related
May 22, 2006
Hello,
I created a Market Basket Data Mining Model with Association Rules, which I want to query and show in a Report. Everything works fine, when I preview the result in the Reporting Services Data tab I see some sort of table which I can expand and then see the related products.
Unfortunately this result seems to be an ADOMD Datareader which I cannot place in a table, matrix or textfield.
If anyone knows how I can make this Informationen available in my Report please let me know.
Thanks in advance
View 6 Replies
View Related
Nov 26, 2007
Hi there,
I am trying to use the new ListView control in VS2008 in an ASP.Net app. My problem starts already with the datasource. I drag and drop a SqlDataSource and select
Microsoft SQL Server Compact 3.5 (.NET Framework Data Provider for Microsoft SQL Server Compact 3.5)
I can connect to the database and test the query in the wizard (I do not need to use a password??)
This is the webconfig entry
<add name="ConnectionString" connectionString="Data Source=C:Program FilesMicrosoft SQL Server Compact Editionv3.5SamplesNorthwind.sdf" providerName="Microsoft.SqlServerCe.Client.3.5"/>
I add the following line in the page load event
AppDomain.CurrentDomain.SetData("SQLServerCompactEditionUnderWebHosting", true);
However I get the error message that the data provider cannot be found and it might not be installed. I added the reference and also gave the folder above ASP.NET full access rights.
Anyone else encountered this problem. It is quiet strange? Thanks a lot for your help.
Cheers,
Chris
View 2 Replies
View Related
May 21, 2008
Hello,
Im developing an asp website, but im getting this error:
Code Snippet
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
/default.asp, line 76
I have 2 servers, the website is running from RACS-IIS-001, and the SQL server is from: RACS-SQL-001
I dont know if i use the wrong driver? im useing SQL Native Client
This is my connection string:
Code SnippetobjConn.Open "Driver={SQL Native Client}; Server=RACS-SQL-001; database=RentACar; uid=sa ; pwd=PASSWORD;"
Can anyone help?
View 4 Replies
View Related
Mar 21, 2007
I have a Gridview bound to a SQLDataSource that uses a Stored Procedure expecting 1 or 2 parameters. The parameters are bound to textbox controls. The SP looks up a person by name, the textboxes are Last Name, First Name. It will handle last name only (ie. pass @ln ='Jones' and @fn=null and you get all the people with last name=Jones. I tested the SP in Management Studio and it works as expected. When I enter a last name in the Last Name textbox and no First Name I get no results. If I enter a Last Name AND First Name I get results. I don't understand.
Here's the HTML View of the page. The only code is to bind the Gridview when the Search button is pressed.
<%@ Page Language="VB" AutoEventWireup="true" CodeFile="Default.aspx.vb" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head runat="server"> <title>Untitled Page</title></head><body> <form id="form1" runat="server"> <div> <asp:TextBox ID="TextBox1" runat="server" TabIndex=1></asp:TextBox> <asp:TextBox ID="TextBox2" runat="server" TabIndex=2></asp:TextBox> <asp:Button ID="Button1" runat="server" Text="Search" TabIndex=3 /> <hr /> </div> <asp:GridView ID="GridView1" runat="server" AllowPaging="True" AllowSorting="True" DataSourceID="SqlDataSource1" DataKeyNames="EmpID" CellPadding="4" EnableSortingAndPagingCallbacks="True" ForeColor="#333333" GridLines="None" AutoGenerateColumns="False"> <Columns> <asp:BoundField DataField="EmpID" HeaderText="Emp ID" ReadOnly="True" SortExpression="EmpID" /> <asp:BoundField DataField="FullName" HeaderText="Full Name" SortExpression="FullName" /> <asp:BoundField DataField="Nickname" HeaderText="Nickname" ReadOnly="True" SortExpression="Nickname" /> <asp:BoundField DataField="BGS2" HeaderText="BGS2" SortExpression="BGS2" /> <asp:BoundField DataField="Phone" HeaderText="Phone" SortExpression="Phone" /> <asp:BoundField DataField="email" HeaderText="Email" SortExpression="email" /> </Columns> </asp:GridView> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:EmpbaseConnectionString %>" SelectCommand="GetByName" SelectCommandType="StoredProcedure"> <SelectParameters> <asp:ControlParameter ControlID="TextBox2" Name="fn" PropertyName="Text" Type="String" ConvertEmptyStringToNull=true/> <asp:ControlParameter ControlID="TextBox1" Name="ln" PropertyName="Text" Type="String" ConvertEmptyStringToNull=true/> </SelectParameters> </asp:SqlDataSource> </form> </body></html>
View 7 Replies
View Related
May 8, 2008
I'm pretty new to .NET and am looking for advice on how to speed up a simple stored procedure that returns 35,000 plus rows. It's a super simple query that returns a client list. It's just that there is soooooo many rows, it's super slow when the page loads.
View 4 Replies
View Related
Feb 1, 2006
Hi, whenever the underlying query being called by EXEC in the followinghas an empty result set I get the following error -- Invalid Data for'Numeric' when EXEC returns empty row. However if I call the querywithout using REPLACE (which I'm forced to do, because openquery doesnot allow variables), I get just an empty result set. Whenever theunderlying query returns a non-empty result set, the code works withouterror (regardless of wether there are nulls in the numeric column).set @switch ='5707550'set @start_date = '01-JAN-2006'set @end_date = '27-JAN-2006'set @month = 1set @year = 2006set @sql_str='SELECT * FROM(select MSC_KEY,to_char(trunc(TSTAMP), ''yyyy-Mon-dd'') as "Timestamp",ROUND( NVL(SUM(SUNRGMMSCBHCP1.XASUTIL),0) / DECODE (NVL(SUM(SUNRGMMSCBHCP1.XASNXFR),0),0,NULL,NVL(SUM( SUNRGMMSCBHCP1.XASNXFR),0)), 5)as "PER_CPU_UTIL"FROM NOR_GSM_COMPOSITE_MSC1_BHCPP SUNRGMMSCBHCP1,mscs_view vWHERE SUNRGMMSCBHCP1.gsm_msc_key = v.msc_key and v.MSC_KEY in (' +@switch + ')and SUNRGMMSCBHCP1.TSTAMP between to_date(''' + @start_date + '00:00:00'', ''DD-MON-YYYY HH24:MI:SS'') andto_date(''' + @end_date + ' 23:59:00'', ''DD-MON-YYYYHH24:MI:SS'')group by MSC_KEY, trunc(tstamp))WHERE rownum < 10000'SET @sql_str = N'select * from OPENQUERY(VISION, ''' +REPLACE(@sql_str, '''', '''''') + ''')'EXEC (@sql_str);Is there anyway to prevent this error?Thanks,Crazy
View 1 Replies
View Related
Dec 20, 2004
I am trying to combine 2 tables, one is an event table, the other is a system table.
I would like to update field system.transaction with the first event.transaction
Where event.account = system.account
and event.effdt > system.effdt
and event.effdt <= system.effdt + 30
It's not really a join so I'm not sure how to write it.
Thanks,
Doug
View 2 Replies
View Related
Sep 13, 2007
Hi all, this is REALLY weird, I can t seem to make heads or tails of it. but from my understanding the each datatype has set contrstraint assigned to it ( example int datatype can only except non-decimal numeric values ) as well as a datetime datatype can only except a vaild date.
Though oddly i have found the following dates in a table ( in addtion the when aby kind of data operation is performed on the table sql returns the following error:
Server: Msg 8630, Level 16, State 1, Line 1
Internal Query Processor Error: The query processor encountered an unexpected error during execution.
Here are some of the dates that were present in the table:
DateColumn1
-----------
1900-01-01 857:44:45.813
1900-01-01 872:51:16.427
1900-01-01 872:54:57.440
1900-01-01 873:09:32.107
1900-01-01 873:13:10.560
1900-01-01 873:16:49.867
1900-01-01 888:27:00.640
DateColumn2
---------
-22063-05-18 00:00:00.000
-20285-02-03 00:00:00.000
In addtion there were some other columns that have had odd data in them(VERY WEIRD)
Char25Column
---------
ÃQ307000
ÃQ307000 ÃQ307000
ÃQ307000
ÃQ307000
Any Thoughs?
Thanks
View 9 Replies
View Related
Mar 6, 2007
Hi there everyone. I have a stored procedure called “PagingTable� that I use for performing searches and specifying how many results to show per ‘page’ and which page I want to see. This allows me to do my paging on the server-side (the database tier) and only the results that actually get shown on the webpage fly across from my database server to my web server. The code might look something like this:
strSQL = "EXECUTE PagingTable " & _
"@ItemsPerPage = 10, " & _
"@CurrentPage = " & CStr(intCurrentPage) & ", " & _
"@TableName = 'Products', " & _
"@UniqueColumn = 'ItemNumber', " & _
"@Columns = 'ItemNumber, Description, ListPrice, QtyOnHand', " & _
"@WhereClause = '" & strSQLWhere & "'"
The problem is the stored procedure actually returns two result sets. The first result set contains information regarding the total number of results founds, the number of pages and the current page. The second result set contains the data to be shown (the columns specified). In ‘classic’ ASP I did this like this.
'Open the recordset
rsItems.Open strSQL, conn, 0, 1
'Get the values required for drawing the paging table
intCurrentPage = rsItems.Fields("CurrentPage").Value
intTotalPages = rsItems.Fields("TotalPages").Value
intTotalRows = rsItems.Fields("TotalRows").Value
'Advance to the next recordset
Set rsItems = rsItems.NextRecordset
I am trying to do this now in ASP.NET 2.0 using the datasource control and the repeater control. Any idea how I can accomplish two things:
A) Bind the repeater control to the second resultset
B) Build a “pager� of some sort using the values from the first resultset
View 3 Replies
View Related
Sep 29, 2015
I followed the tutorial posted at [URL] ...
Everything was ok until the last step where I had to process the mining structure which resulted in a warning
"Informational (Data mining): Decision Trees found no splits for model, Tbl Decision Tree Example."
What does this error mean? How do I resolve it? Also, I only see the first level in the Mining Model Viewer, I don't see the levels 2 and 3.
View 2 Replies
View Related
