Oracle Connection Fail With Microsoft OLEDB Provider For Oracle MSDAORA.1
Feb 22, 2006
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails. I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Previously i was using oracle8i with ssis.ssis was working fine.later i have upgraded 8i to oracle 9i.now when ever i try to establish a new connection using Microsoft OLEDB Provider for Oracle.i am getting the following error "Oracle error occurred, but error message could not be retrieved from Oracle" .but i am able to access the oracle 9i database thru pl/sql and toad. what could be the problem?
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query? Thanks.
I am having a nightmarish time getting an Oracle Connection Manager working as a source in my SSIS package.
The CM is called "OLTP_SOURCE". When I inspect the configuration and test connection, it succeeds, however when I go to run the package (both in debug mode and via DTEXECUI) I get the following error:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
After this happens, if I go into an OLE DB Source within a DFT, I get the following:
No disconnected record set is available for the specified SQL statement.
Now, if I go back into the CM, enter the password and test, it succeeds. From this point, I will go to preview the data in the OLE DB Source, and it comes back fine. However, when I go to run the package, I get the same error time and time again:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
The quick reader will suggest that the password is not being persisted. To this end, I have tried each of the following techniques to no avail:
1. Double, Triple and Quadruple check that the "save" password option in the CM is checked.
2. Hardcode the connection string in the dtsx XML-behind.
3. Enable Package Configurations and hardcode the connection string in the dstsconfig file.
4. Run the dtsx file using DTEXECUI, providing it with the configuration (that includes the hard-coded password).
5. Run the dtsx file using DTEXECUI, providing it the connection string in the Connection Managager override UI.
Can anyone help shed some light on what might be going on? So far, it is obvious that there has to be something that I am doing wrong because (syntax dialect differences aside) I can't imagine that Oracle sources should be this much of a headache.
Trying to used DTS from SQL Server 7 to import a table from Oracle 8 DB to SQL Server. SQL Server has Oracle 8 connectivity installed and a database instance setup. Connection using the instance works from Oracle Enterprise manager and all Oracle tools. The MS OLEDB provider for Oracle fails to connect : could not resolve service name. I have this working on a different server with the same setup (SQL Server 7 SP 2 + All Oracle 8.0.5 connectivity).
Windows 2003(64bit) server, SQL 2005 Server(64bit), Oracle client 10G rel2 (64bit) is installed. But when I am going to create a datasource to the Oracle database the Oracle OLEDB Provider is missing, the only Providers avaliable is from Microsoft.
I have tried to install ODAC (64bit) with no result.
Anyone who have come across this problem and how do I do to resolve it?
BTW! Is there a way to try communication with the OLEDB provider from the commandprompt?
I issued the following set of statements against an Oracle 8.0.6 table linked to Microsoft SQL Server 7.0 (SP2):
BEGIN TRANSACTION DELETE FROM ORACLE_DATABASE..SCHEMA1.TABLE1 WHERE COLUMN2=123.45 ROLLBACK TRANSACTION
and received the following message:
Server: Msg 7391, Level 16, State 1, Line 1 The operation could not be performed because the OLE DB provider 'MSDAORA' does not support distributed transactions.
I searched BOL and found this sentence:
To perform distributed transactions between SQL Server and Oracle, you must use Oracle version 8.0.4.1 or later.
What am I missing? Is there a higher version of Microsoft OLE DB Provider for Oracle that supports distributed transactions (we are using the one that comes with Microsoft SQL Server 7.0 installation)?
I am trying to establish a connection to an Oracle database using the following code in a script task:
Dim oOleDbConnection As OleDbConnection Dim sConnString As String = _ "Provider=OraOLEDB.Oracle;" & _ "Data Source=DBxxx;" & _ "User ID=Userxxx;" & _ "Password=Passxxx" oOleDbConnection = New OleDb.OleDbConnection(sConnString) oOleDbConnection.Open() When I execute the script task, I receive the following error: The 'OraOLEDB.Oracle' provider is not registered on the local machine. Am using the correct provider? I do not know how to resolve the said error. Here are some facts: Oracle 8i is installed. Tnsnames.ora is updated. I have successfully connected to Oracle SQL *Plus to test the above credentials. Please help. Thanks.
Does anyone know if the "Microsoft OLE DB Provider for Oracle" in 64-Bit Windows exists in SQL Server 2008 64-bit? It only existed in 32-bit SQL 2005, which was a big problem. Needed for Linked Server creation. We do not want to use OPENQUERY calls with the native Oracle 10G driver, too many coding changes.
Microsoft SQL Server Management Studio 9.00.2047.00 Microsoft Analysis Services Client Tools 2005.090.2047.00 Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447) Microsoft MSXML 2.6 3.0 4.0 6.0 Microsoft Internet Explorer 6.0.3790.1830 Microsoft .NET Framework 2.0.50727.42 Operating System 5.2.3790
I have the OraOLEDB.Oracle provider installed to the (C:oraclexe) directory.
I am having problems querying from linked oracle server. When i setup oracle as a linked server and purposely enter an incorrect password the query i run tells me i have an incorrect password. So it at least knows that. when i set the correct password and run a query I get this error:
(i replaced the real server name with "someServer".)
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer".
1. If I have millions of rows to be compared, then which cache type is prefereed for lookup, Partial or no caching?
2. If I have lookup connected to Oracle Oledb, cache type as partial and SqlCommandParam as following
select * from (SELECT ORDER_ID, OPER_KEY, STEP_KEY, SUM(OCCUR_COUNT) AS OCCUR_COUNT FROM SFWID_OPER_DESC_EXPLD GROUP BY ORDER_ID, OPER_KEY, STEP_KEY) refTable where refTable.ORDER_ID = ? and refTable.OPER_KEY = ? and refTable.STEP_KEY = ?
then it doesn't allow me to add the parameters from Advance tab of Lookup transformation edition, and raises following error
"Provider cannot derive parameter information and SetParametInfo has not been called"
I have a SSIS which have a main connection to a SQL Server 2005 DB, and also another connection to a Oracle database, and fetch data from the Oracle db.
I have the 2 connection managers, and everything runs fine when I test it in dev studio. However, once I imported it to the DB, and run it on command line, I get the "Class not registered" error.
Log file as follows:
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:23:53 PM Info: 2008-02-28 13:23:53.91 Code: 0x40016040 Source: CRDA_D_GIM_CONN_TEST Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_SOURCE";". End Info Info: 2008-02-28 13:23:54.03 Code: 0x40016040 Source: CRDA_D_GIM_CONN_TEST Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_USER";". End Info Info: 2008-02-28 13:23:54.05 Code: 0x40016040 Source: CRDA_D_GIM_CONN_TEST Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_PWD";". End Info Error: 2008-02-28 13:23:54.55 Code: 0xC0202009 Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2008-02-28 13:23:54.56 Code: 0xC00291EC Source: Execute SQL Task Execute SQL Task Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: 2008-02-28 13:23:54.58 Code: 0x80019002 Source: CRDA_D_GIM_CONN_TEST Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:23:53 PM Finished: 1:23:54 PM Elapsed: 1.547 seconds
I DID TRIED MY BEST to search before posting, and most of them are having problem with 32 bit and 64 bit executions. However, in my case, both are 32 bit (as shown in the log file).
In the above test, I'm setting DoNotSaveSensitiveData, and then fetch it with package configuration.
To make sure the package configuration is not creating pblm for me, I also tried to hardcode everything in the package, and then encrypt the whole ssis with password, and run the package with the /DECRYPT option, so that everything is already intact.
But I still get the same error. Log file as follows.
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /De "painful" /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 2:24:25 PM Error: 2008-02-28 14:24:27.11 Code: 0xC0202009 Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2008-02-28 14:24:27.14 Code: 0xC00291EC Source: Execute SQL Task Execute SQL Task Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: 2008-02-28 14:24:27.14 Code: 0x80019002 Source: CRDA_D_GIM_CONN_TEST Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 2:24:25 PM Finished: 2:24:27 PM Elapsed: 1.422 seconds
Can anyone suggest what is missing ?? or what can be done ??
dear list can anyone figure out a workaround as to why OLEDB Provider MSDORA cannot store passwords I have all the info stored in a table (Project Real Best Practise) The user id I have stored in string ConfiguredValue gets transfered to OLEDB Provider MSDORA named (SQL_REAL_Source_myoradb) but not the password To workaround this bug only with MSDORA can aynonne sugest a setting I should use in package security ie the default is EncryptSensitiveWithUserKey?
thanks Dave
CREATE TABLE [admin].[Configuration]( [ConfigurationFilter] [nvarchar](255) NOT NULL, [ConfiguredValue] [nvarchar](255) NULL, [PackagePath] [nvarchar](255) NOT NULL, [ConfiguredValueType] [nvarchar](20) NOT NULL ) ON [PRIMARY]
Hello!I have an Oracle linked server connected through MSDAORA. Linked serverqueries work perfectly - the "openquery" ones as well as the4-part-named ones.The problem I have is with embedding the queries within SQL Servertriggers.Trigger:CREATE TRIGGER tgTest ON [dbo].[test]FOR INSERT, UPDATE, DELETEASselect * from openquery(LS, 'select * from ORACLE_TEST')executing "delete from test" in SQL Query Analyzer raises this error:Server: Msg 7391, Level 16, State 1, Procedure tgTest, Line 5The operation could not be performed because the OLE DB provider'MSDAORA' was unable to begin a distributed transaction.OLE DB error trace [OLE/DB Provider 'MSDAORA'ITransactionJoin::JoinTransaction returned 0x8004d01b].I've tried almost every solution I found online, but nothing helped:(This looked promissing: http://tinyurl.com/nk2wd , but it didn't get meany futher.Maybe someone can get me through the troubleshoot mentioned in thatlink:- check if DTC running properlyHow do I check that? If I open the "Support services" in EnterpriseManager and right-click the "Distributed Transaction Coordinatior" Ican stop the service, what indicates the service is running, but isthere anything else I should check? I have 0 items in the right windowpane of the DTC item, is it OK?- registry setting as discussed earlierThe following Registry Keys should be entered:[HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSDTCMTxOCI ]"OracleXaLib"="oraclient8.dll""OracleSqlLib"="orasql8.dll""OracleOciLib"="oci.dll"My entries are:"OracleOciLib"="ociw32.dll""OracleSqlLib"="SQLLib18.dll""OracleXaLib"="xa73.dll"Are they OK?- check if Mtxoci.dll is loadedThere is a Mtxoci.dll in my system32 dir, but how do I tell if it'sloaded? Should I regsvr32 it?- SET XACT_ABORT ON should be use in your SQL statement, for example:SET XACT_ABORT ONBEGIN DISTRIBUTED TRANSELECT statementCOMMIT TRANI've tried that, both in trigger but also surrounding the query thatfires the trigger.Am getting deseperate - please help. Will send candies!TIA
I have an ODBC connection setup for Oralce RDB. This works fine in say MSAccess. Now I would like to add a SQL Server Linked Server to this ODBC driver (it is for RDB not regular Oracle), but I am not able to get this to work. What is the Provider String and Location / Catalog for using this type of ODBC? I setup DSN as 'name', Provider String as 'UID=user;PWD=pass;' and it seems it tries to connect but gives an error. "%SQL-F-SCHNOTDEF, Schema USER is not defined"
The OLE DB provider "Microsoft.Jet.OLEDB.4.0" has not been registered
Enviromnet :
Windows 2003 64 bit with SP1 and sql 2005 installed.
Same code is executing fine in my local machine which is XP 32 bit.
Can some one help me in resolving this issue.
Also when I tried to check the providers by expanding the linked servers node in the SQL server management studio . i couldnt found the provider for jet.
I want to create a table in MS-Access. So I have written the following query.
Code Snippet select * from Openquery(KKACC, 'select * Into Temp from Table select 1 as col1')
But I am getting the following error.
Code Snippet
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "KKACC" returned message "Syntax error in FROM clause.". Msg 7321, Level 16, State 2, Line 1 An error occurred while preparing the query "select * Into Temp from Table select 1 as col1" for execution against OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "KKACC".
How can I resolve this error. Does any one have any work arround for this..?
I am on an XP Pro 32-bit laptop, running SQL Server 2005 Developer Edition. I want to import an Excel spreadsheet into one of my databases using (formerly known as) DTS. The Excel spreadsheet was created in 2003 (I have Office 2007 installed on this laptop). Whenever I try and do any OleDb import, I get the error:
TITLE: SQL Server Import and Export Wizard ------------------------------ The operation could not be completed. ------------------------------ ADDITIONAL INFORMATION: The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine. (System.Data) ------------------------------ BUTTONS: OK ------------------------------
I cannot install/reinstall MDAC because I have the latest version. What else can I try?
As additional information, I also get the error when trying to import anything into or export anything out of Access 2007. I'm pretty sure MDAC is awful, but I still need OleDb providers for much of the work I am doing.
Hi! I have just installed Microsoft OLEDB provider for DB2 on a SQL server 2005. I created a Linked server against our DB2 V.8 Z/OS database. I tested the connection via execution of a simple select call, something like:
SELECT FIELD_A FROM DB2SRV.DB2DB.CREATOR_A.TABLE_A WHERE FIELD_A='ABC'
I traced the call on the DB2 site. The SQL running on DB2 site was to my surprise without the €œwhere clause€?:
SELECT FIELD_A FROM DB2DB.CREATOR_A.TABLE_A
So, all rows are moved to SQL server before the where clause is executed, resulting in bad performance. The index on FIELD_A is not used and so on €¦ !
If anyone out there has an idea of what could be wrong, please let me know!
NB. I know that by using OPENQUERY pass-through query, all execution is done on the DB2 site.
Hi all, If have faced the following problem when connecting to Oracle server from MS SQL Server 7.0 using OLE DB Provider for Oracle. The problem is that I am trying to insert a record in a table in Oralce database, when I connect using OLE DB, and execute the INSERT, I have found that before the INSERT takes place, a TABLE SCAN is performed on the target table for the insert statement. This realy affects the performance I am looking for. I guiss there is a way to provide the connection with some parameters to overcome this problem of TABLE SCAN. Thanks for your help in advance.
I have got a problem with the a linked server in SQL server 2005 (64 bit) to Oracle 8.0.5. (32 bit).
Further details:
The old existing SQL server 2000 (32 bit) has a linked server to Oracle 8.0.5. The works with the OLE DB provider from Microsoft. The new SQL server 2005 (64 bit) should also have a linked server to this Oralce database. I have installed the Oracle 8.0 clients on the new server. The connection to oracle works with the client tools from Oracle.
But the SQL server 2005 couldn't connect to the oracle database.
The error message from the SQL server sounds (translated form a german error message):
A instance of the OLE DB provider "OraOLEDB.Oracle" for the linked server "xxxxxx" can't create.
Is the Oracle client software / OLE DB provider the problem?
Exist an other OLE DB provider for Oracle, may be from Microsoft, which works?
Thanks for your help
german:
Hallo Zusammen,
Ãch habe ein Problem bei der Migration von SQL Server 2005 auf ein x64 Windows System.
Problem ist folgendes: Auf dem alten Server Windows x32 lief SQL Server 2000 mit einem Verbindungsserver zum Oracle Server 8.05. Das funktionierte mit dem OLE DB treiber von Microsoft hervoragend. Nun haben wir aber eine neue Windows x64 Maschine und ich möchte die Verbindung zum Oracle Server wieder nutzen. Hatte die Oracle Client Software installiert und bekomme eine Fehlermeldung:
Eine Instanz des OLE DB Anbieters "ORAOLEDB.ORACLE" für den Verbindungsserver "xxxxx" kann nicht erstellt werden.
Ist das ein Problem mit der Oracle Client Software bzw. dem zugrunde liegenden OLE DB Treiber? Gibt es einen anderen OLE DB Treiber für Oracle, z.B. von Microsoft, der funktionieren könnte?
Bin schon länger damit beschäftigt, das zum Laufen zu bekommen. Die Oracle Version ist nicht die neueste, ich weiß. Was kann ich tun, damit das endlich läuft.
i'm not able to see this provider in my ssis connection manager properties. please help me out in getting the provider restored back in native providers options
i notice that in toolbox panel, there are these kind of different dataadapter and dataset, what is difference between them, and under which situation we use which one?
