Organize Data
Feb 12, 2008
Hi,
I have data like this in Excel table:
ID GameScore1 GameScore2 GameScore3 ClassScore1 ClassScore2 Classscore3
10 10 20 27 5 35 23
I have to arrange like this in SQLServer table:
ID TestRecord GameScore ClassScore
10 1 10 5
10 2 20 35
10 3 27 23
Test Record 1 for score1, 2 for score2, 3 for Score3.
Which way to organize this data in SSIS?
Thanks in advance
View 10 Replies
ADVERTISEMENT
Jan 9, 2007
Hello,
This is more a informational question. Until now we had over 50 reports ready in our system, we are almost ready to go into production and are starting to link all reports with eachohter. The first problem was that we had them all nicely grouped in different projects so that we could publish in a logical folder-tree. Problem is that we can't jump to reports that are nog in the same folder. Going by url changes the layout and parts of the report manager are gone.
We then started to have a look at Sharepoint but i can't find books on the topic SharePoint & SSRS that describes the possible options. I've seen quite some documents and ways to publish reports but until now we prefer to mail the periodical reports to the users with data-driven subscriptions.
So at this moment we don't know quite wha direction to take. Putting all reports in one folder would solve many linking problems but makes it quite messy for the users.... And the linking issue is a must. As we now will start to create our dashboards with SSRS too.
So, any suggestions on what road to take or what publications to read are welcome.
Kind Regards
Harry
View 1 Replies
View Related
Feb 6, 2008
Hi,
I have information like this:
Apllicant information: Firstname, Lastname, Address, Phone, SSN, county, workphone..
Each applican can earn 3 certificates:
1st Certificate
2nd certificate
3rd certificate
Status of certification
Status of certification
Status of certification
Status of dues
Status of dues
Status of dues
Certification#
Certification#
Certification#
Validation date
Validation date
Validation date
Renewal date
Renewal date
Renewal date
Effective date
Effective date
Effective date
Date of cert # changed > means earned the next(second or third certificate).
These don€™t have this column information
These don€™t have this column information
Some common information for all 3 certificates like NOTE,€¦
How to organize the above information in SQLServer tables. how to apply the normalization . I can store all the contact information in one table and put the SSN as primary key. How to organize the certificates into tables? I have to made 3 tables for 3 certificates and linked to contact information table?
Thanks in advance
View 13 Replies
View Related
Jan 21, 2008
I'm very new to SQL, so you'll have to excuse the nubishness of this question. I've got my trusty O'Reilly book here!
We're using Microsoft SQL Server 2005 on our web server. I'm currently working on a project to get a few MS Access Databases available on the web page.
The web part is actually working fine, with the DBs exported into SQL for performance reasons. (From what I've read pulling data from the .mdb file could cause me problems in the future, so I'm tossing it all onto the SQL server from the start.)
Before I get into the project full-tilt, though, I'm curious about how best to organize all the data?
I'm using the Upsizing Wizard in Access for the conversions, and every new DB gets added under Databases. If this gets approved I may be looking at well over a hundred DBs which will eventually be converted and made web accessible.
I can keep everything neat and tidy on the web server by just tossing things in a few directories, but the menu on the SQL Server Management Studio is going to become a mess really quickly if I let it just keep adding to +Databases.
Is there a way to sort everything into a series of folder/groups, like how System Databases has it?
Thanks in advance,
-Lamune
View 2 Replies
View Related
Jul 4, 2007
Hello,
I have DFTs with around 50 components and future ETLs will have 100+ components in DFTs.
I was wondering that is there anyway to group components like we have #region in C#.
Thanks,
Kapil
View 4 Replies
View Related
Jul 17, 2007
Hello,
I need some advice regarding organizing packages.
I am in starting phase of a data conversion project. As my ETL target, I have to produce around 70 flat files. I am creating one package for each target file. Some target files may be a result of 2-3 packages.
I have some common packages that get called from many other packages.
Before my solution tree grows into unmanageable state, I would like packages to get organized based on their target and purpose of the package.
The ideal solution to this problem would be to organize packages in a folder structure but I couldn€™t see any option to create folders in a solution.
I also noticed that we can€™t easily put package files next to each other even after renaming packages.
I was wondering is there a better or any way to organize packages in solution tree?
Kapil
View 1 Replies
View Related
Jun 10, 2005
Greetings,I have one table, named Article, and one table name Category.The problem is, one Article could be in just one or in several categories.What is the best way to connect data between Article and Category according to fast search performance?I have several ideas:1. To have third cross table Article_Category with fields Article_ID and Category_ID, and search Article_Category table 2. To have several INTEGER columns in Article table (like Category_ID1, Category_ID2,..) and search those columns3. Add one VARCHAR field in Article table where I could write Category ID's delimited by some character (e.g. by comma), and do text search in only that column.What is recommended for solving problems like this?
View 7 Replies
View Related
Jul 23, 2005
Hello,i want to use toad to work with sql-Server for my business. But i cantget rid of it, after extracting the packets i find the toad ss.exe.I dont know how to connect to my database, as i never worked beforewith the odbc-database driver. I think it must be about the manager"start -> controls -> odbc...".All i want is to view the datasets in my db, but i dont want to writethe nesassery querys, like in mysql-admin for mysql databases.Is toad the right applikation or should i use an other manager?plz help me, thanks - xunling
View 1 Replies
View Related
Apr 21, 2015
Is there any way in which I could distinguish a group of Database users from the other users. Say for e.g. store the Database users hierarchically, etc. Adding a Prefix/Suffix to the user name as a distinguish-er will not work in my case. I want to restrict the deletion of these Database users. Even the login with sysadmin or serveradmin rights should not be able to DROP those Database users.
View 11 Replies
View Related
Mar 11, 2015
How to write a Dynamic Pivot Statement to Calculate and Organize Columns like:
CREATE TABLE #mytable
(
Name varchar(50),
GA int,
GB int,
startdate DATETIME,
enddate DATETIME
[Code] ...
Below is Our Sample Table Data.
Name GAGBstartdateenddate
Pavan 261/1/20151/1/2015
Hema 561/1/20151/1/2015
Surya 501/1/20151/1/2015
Pavan 811/2/20151/8/2015
Hema 311/2/20151/8/2015
Surya 121/2/20151/8/2015
Pavan 1041/9/20151/15/2015
Hema 301/9/20151/15/2015
Surya 6131/9/20151/15/2015
How to write Pivot Satement to get Oupt like below:
1/1/2015 Pavan Hema Surya SumTotal
Total 8 11 5 24
GA 2 5 5 12
GB 6 6 0 12
1/8/2015 Pavan Hema Surya SumTotal
Total 9 4 3 16
GA 8 3 1 12
GB 1 1 2 4
1/15/2015 Pavan Hema Surya SumTotal
Total 14 3 19 36
GA 10 3 6 19
GB 4 0 13 17
View 5 Replies
View Related
Nov 24, 2006
Hi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Dec 14, 2005
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
View 4 Replies
View Related
Dec 4, 2007
I have used both data readers and data adapters(with datasets) in the projects that I have worked on. I am trying to get some clarification on when I should be using which one. I think I am doing this correctly but I want to be sure I am developing good habits.
As the name might suggest, it seems like a datareader is for only reading data. I have read that the data adapter and dataset are for a disconnected architecture. Or, that they can be used for this type of set up. I have been using the data adapter and datasets when writing to a database and the datareader when reading from a database.
Is this how these should be used? Is the data reader the best choice for reading data? Am I doing this the optimal way from a performance stand point?
......................................................thanks in advance
View 1 Replies
View Related
Nov 2, 2015
We already integrated different client data to MDS with MS Excel plugin, now we want to push back updated or new added record to source database. is it possible do using MDS? Do we have any background sync process to which automatically sync data to and from subscriber and MDS?
View 4 Replies
View Related
Oct 18, 2006
When I enter over 4000 chars in any ntext field in my SQL Server 2005 database (directly in the database and through the application) I get an error saying that the data could not be updated because string or binary data would be truncated.Has anyone ever seen this? I cannot figure out what is causing it, ntext should be able to hold a lot more data that this...
View 7 Replies
View Related
Aug 12, 2015
I have a requirement to implement CDC for 50+ tables to implement incremental data changes warehouse/reporting rather than exporting the whole table data. The largest table is having more than half a billion records.
The warehouse use a daily copy of OLTP db (daily DB refresh). How can I accomplish this. Is there a downside in implementing CDC just for the sake of taking incremental changes on the tables?
Is there any performance impact if we enable CDC on OLTP db?
Can we make use of the CDC tables on the environment we do daily db refresh so that the queries don't hit OLTP database?
What is the best way to implement CDC to take incremental changes for reporting.
View 0 Replies
View Related
Jul 20, 2005
Hi,This is driving me nuts, I have a table that stores notes regarding anoperation in an IMAGE data type field in MS SQL Server 2000.I can read and write no problem using Access using the StrConv function andI can Update the field correctly in T-SQL using:DECLARE @ptrval varbinary(16)SELECT @ptrval = TEXTPTR(BITS_data)FROM mytable_BINARY WHERE ID = 'RB215'WRITETEXT OPERATION_BINARY.BITS @ptrval 'My notes for this operation'However, I just can not seem to be able to convert back to text theinformation once it is stored using T-SQL.My selects keep returning bin data.How to do this! Thanks for your help.SD
View 1 Replies
View Related
Nov 10, 2015
I'm using Script Component to load data into Oracle DB due to the poor performance issue. Now, I found it will missing some data during the transmission. Please see the screenshot below:Â
SQL Server：
Oracle:
DDL:
create table Person
(
BusinessEntityID Integer,
FirstName nvarchar2(50),
MiddleName nvarchar2(50),
LastName nvarchar2(50)
);
Result:
I follow up this article:Â [URL] ....
VB Script:Â
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
[Code] ..........
View 8 Replies
View Related
Apr 16, 2008
Hi all, i got this error:
[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
and also this:
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected.
It seems that somehow the 3 columns are not read in from the source file?
ans alslo fiscal year, fiscal week is not set up up properly in my data destination?
anyone faced such errors before?
Thanks
View 13 Replies
View Related
Jul 24, 2015
When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
View 10 Replies
View Related
Feb 5, 2007
is there a step by step paper to get there? here is what i need to consider. I Iwill have many customers that will need their own set of records and access pages "branded for their company" each customer will have many clients. I am hosting this application on a windows 2003 server with SQL 2005 server enterprise.
I am using windows authentication, I have created a username in windows, then i added the windows user in SQL management studio in security, granted "DB Read" and "DB write" and again under the database security tab. still from the web authentication fails. i must be nissing a step or two?
I expect to set up a username for each database as i setup new customers.
View 1 Replies
View Related
Feb 23, 2008
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
View 3 Replies
View Related
Sep 28, 2015
I setup this package to import data from a Sharepoint list to a SQL Server data table. The primary key of my SQL table is mapped to the Title column of my Sharepoint list. There is a possibility that duplicate values will be entered in the Title field of the Sharepoint list. So when importing data into my table via SSIS, my package always error-out when there it comes across duplicate values. how you others have managed data integrity when importing from a Sharepoint list with the Title column being mapped to the primary key of a table.
View 4 Replies
View Related
Feb 12, 2008
Hello,
I am wondering what conversion rules apply, when a string, which contains a number, is saved to a SQL Server 2005 into a column of type decimal.
This is the code I€™m using (C++):
CString cValue = "0.75"
_variant_t vtFieldValue;
vtFieldValue = _variant_t(cValue)
pRecordSet->Fields->Item["MyColumn"]->Value = vtFieldValue;
"pRecordSet" is an ADO recordset. The database column "MyColumn" is of type "decimal(19,10)".
The most important question for me is, if the regional settings of the database server or the regional settings of the client PC are considered during the conversion from the string to the decimal value. For example in standard French regional settings the "." would not be recognized as decimal separator.
I am also wondering if the language of the database instance, in which this data is saved, is considered during this conversion or any other settings of this database instance.
So my general question is: Does anybody know exactly what rules apply during the above mentioned conversion?
Thank you for your help.
Regards,
Volker
View 2 Replies
View Related
Oct 12, 2015
I've question about how to handle structural datamodel changes in a datasource of PowerPivot. Suppose I'm developing a starmodel in SQL Server and sometimes a datatype changes or a name of a field changes in a table. It seems to me that PowerPivot handle this not gracefully as Analysis MD does (mostly). I received an error because of a wrong fieldname or even no error when a dattype changes in PowerPivot. Is this common or do I something wrong here. Does this mean that every time the datamodel changes the PowerPivot should be recreated? Or am I missing the clue here?
View 6 Replies
View Related
Jun 13, 2006
Hi everyone,
I have to extract, dayly a list of contacts on a exchange server in a table on our EDW on sql server 2005. Is it possible to get the information directly from a dataflow or i will have to developpe a script task ?
Need help desperatly !!!
View 3 Replies
View Related
Apr 22, 2015
I am getting ErrorCode 8 while loading the data from stage to model. I have checked my error view it states that "Member Code is Inactive".
Initially I have loaded same set of data in Model from MDS Stage table but then deleted with ImportType = 5 which removed all the data from the MDM model.
Now i want to load it back but its giving the Error Code 8 .. Before loading the same data i have changed the stage table Importtype to 2 and Importstatusid to 0.
View 6 Replies
View Related
Jun 19, 2007
Hello,
I have noticed that for one of my data-flows, the process is really long during the phase "the final commit data insertion has started".
To be accurate, the process is fast until it reaches this phase. It happens often when I load millions of lines.
The extraction is done from a database SQL Server 2005 to a database SQL Server 2005, on the same server (with the SQL Server native provider).
I used a SQL Server destination but I have tried with an OLE DB destination and it is the same situation.
Why the process could be so long during this phase?
There is a way to optimised my package to avoid that?
Any idea is welcome.
Thanks.
Guillaume
View 6 Replies
View Related
Nov 1, 2006
HiI'm having problems following the tutorial on creating a data access layer - http://www.asp.net/learn/dataaccess/tutorial01cs.aspx?tabid=63 - when I try to compile in Visual Studio 2005 I get namespace could not be found. I followed exactly the tutorial - I created a dataset and added this code in my aspx page. <asp:GridView ID="GridView1" runat="server" CssClass="DataWebControlStyle"> <HeaderStyle CssClass="HeaderStyle" /> <AlternatingRowStyle CssClass="AlternatingRowStyle" />In my C# file I added these lines... using NorthwindTableAdapters; <<<<<this is the problem - where does this come from? protected void Page_Load(object sender, EventArgs e) { ProductsTableAdapter productsAdapter = new ProductsTableAdapter(); GridView1.DataSource = productsAdapter.GetProducts(); GridView1.DataBind(); }Thanks in advance
View 6 Replies
View Related
Jun 11, 2007
My vendor requires data to be sent in Excel format. Some of my tables have rows over 65,536 so I need to use Excel 2007 (Max of 1,048,576). Right now my data sits in SQL 2000. I am using MS SQL Enterprise Manager 8.0 to prepare the data. Is there some kind of add on or selection I am missing to use DTS to export from SQL to Excel 2007?Thanks in advance.
View 3 Replies
View Related
May 7, 2014
I think I am definitely thrashing and am not getting anywhere on something I think should be pretty simple to accomplish: I need to pull the total amounts for compartments with different products which are under the same manifest and the same document number conditionally based on if the document types are "Starting" or "Ending" but the values come from the "Adjust" records.
So here is the DDL, sample data, and the ideal return rows
CREATE TABLE #InvLogData
(
Id BIGINT, --is actually an identity column
Manifest_Id BIGINT,
Doc_Num BIGINT,
Doc_Type CHAR(1), -- S = Starting, E = Ending, A = Adjust
Compart_Id TINYINT,
[Code] ....
I have tried a combination of the below statements but I keep coming back to not being able to actually grab the correct rows.
SELECT DISTINCT(column X)
FROM #InvLogData
GROUP BY X
HAVING COUNT(DISTINCT X) > 1
One further minor problem: I need to make this a set-based solution. This table grows by a couple hundred thousand rows a week, a co-worker suggested using a <shudder/> cursor to do the work but it would never be performant.
View 9 Replies
View Related
Jan 12, 2015
Was wondering if there was a best practice minimum permissions for creating a SQL login to use when setting up a new shared Data source for SSRS report manager?
Something along the lines of them being a data read for the DB and permissions to update tempdb?
Would have thought it not advisable to have the login be able to update the main db...
View 1 Replies
View Related
Sep 4, 2015
I need to create a function that replaces the data in a column with an 'X' based on the LEN of the data in the column. I created one that does a replacement, but it fills the column based on the max data length, and not the current length of the string or integer. An example of what I'm trying to accomplish.
Original data in a varchar(30) column:
thisisavalue
thisisanothervalue
thisisanothervalueagain
shortval
replaced with
xxxxxxxxxx
xxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxx
xxxxxxx
My current function is replacing the data like this:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
View 4 Replies
View Related
