Out Of Range Error When Updating A Decimal Value
Dec 5, 2006
I am trying to update a database that has decimal(4,1) in a field. It can hold 100, but when I change a value in a gridview to 100 and update it, I get the error below. Any reason wny?
Parameter value '100.0' is out of range.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.ArgumentException: Parameter value '100.0' is out of range.
Source Error:
Line 1841: int returnValue;
Line 1842: try {
Line 1843: returnValue = command.ExecuteNonQuery();
Line 1844: }
Line 1845: finally {
Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesmyprofile45e0ea66e9c9d282App_Code._wfrgryw.27.cs Line: 1843
Stack Trace:
[ArgumentException: Parameter value '100.0' is out of range.]
System.Data.SqlClient.TdsParser.TdsExecuteRPC(_SqlRPC[] rpcArray, Int32 timeout, Boolean inSchema, SqlNotificationRequest notificationRequest, TdsParserStateObject stateObj) +4085
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1021
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +314
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +413
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +11 5
StatisticsDALTableAdapters.StatisticsTableAdapter.UpdateStatistics(Nullable`1 ID, Nullable`1 PlayerID, Nullable`1 FG, Nullable`1 TTP, Nullable`1 FT, Nullable`1 RPG, Nullable`1 DEFR, Nullable`1 OFFR, Nullable`1 APG, Nullable`1 SPG, Nullable`1 BPG, Nullable`1 Turnovers, Nullable`1 PPG, String SYear, String EYear, String StatisticsType) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesmyprofile45e0ea66e9c9d282App_Code._wfrgryw.27.cs:1843
YourHoopSpace.BLL.StatisticsBLL.UpdateStatistic(Int32 ID, Int32 playerID, Nullable`1 fg, Nullable`1 ttp, Nullable`1 ft, Nullable`1 rpg, Nullable`1 defr, Nullable`1 offr, Nullable`1 apg, Nullable`1 spg, Nullable`1 bpg, Nullable`1 turnovers, Nullable`1 ppg, String sYear, String eYear, String statisticsType) in f:MyProfileApp_CodeBLLStatisticsBLL.cs:128
View 5 Replies
ADVERTISEMENT
Apr 29, 2005
This problem is strictly an SQL problem, and I am about to lose my mind over it. I have a table named Inventory that has a column named PartialQty which is of type DECIMAL(11,4). I have shortened my query for simplicity, but here it is.
DECLARE @pqty1 DECIMAL(11,4)
SELECT @pqty1 = PartialQty FROM Inventory WHERE InventoryID = @invIDPRINT @pqty1 UPDATE Inventory SET PartialQty = 6.5513 WHERE InventoryID = @invID
SELECT @pqty1 = PartialQty FROM Inventory WHERE InventoryID = @invIDPRINT @pqty1
Before this query is ran, the value in PartialQty is 1.2345. If I run this 2 times in a row, this is the output I get:
RUN 1:
1.2345
(1 row(s) affected)
(1 row(s) affected)
(1 row(s) affected)
(1 row(s) affected)
6.0000
RUN 2:
6.0000
(1 row(s) affected)
6.5513
I don't understand 2 things. One is why the first run displays (1 row(s) affected) 4 times even though there is only one record with that InventoryID.
And the other thing I don't understand is why the first time I run it, it loses all of the values after the decimal point.
Please help,
Scott
View 2 Replies
View Related
Oct 10, 2006
Hi
I am trying to make a custom task. The custom task has one input, which i map to externalmetadata column in the task and one output.
When i run the task it fails with this error ( I am putting the whole SSIS message)
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0047062 at Data Flow Task, Lib [2387]: System.ArgumentException: Value does not fall within the expected range.
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSBuffer90.DirectRow(Int32 hRow, Int32 lOutputID)
at Microsoft.SqlServer.Dts.Pipeline.PipelineBuffer.DirectRow(Int32 outputID)
at Lib1.LibPM.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Lib" (2387) failed with error code 0x80070057. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x80070057.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Flat File Destination" (1855)" wrote 0 rows.
Task failed: Data Flow Task
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
----------------------------
This is my piece of code which is trying to put the data in the output buffer (ProcessInput function).
int GoodOutputId = -1;
IDTSInput90 inp = ComponentMetaData.InputCollection.GetObjectByID(inputID);
//GetErrorOutputInfo(ref errorOutputID, ref errorOutputIndex);
GoodOutputId = ComponentMetaData.OutputCollection[0].ID;
System.Console.Write("Here i am");
System.Console.Write(GoodOutputId);
if (!buffer.EndOfRowset)
{
while (buffer.NextRow())
{
if (_inputColumnInfos.Length == 0)
{
buffer.DirectRow(GoodOutputId);
}
else
{
buffer.DirectRow(GoodOutputId);
}
}
}
I have put any code in the else part as i am just trying to run the task as of now and later put the functionality in it.
Please let me know if i have missed something. Thanks in advance.
Vipul
View 1 Replies
View Related
Sep 26, 2007
I am working with a legacy SQL server database from SQL Server 2000. I noticed that in some places that they use decimal data types, that I would normally think they should be using integer data types. Why is this does anyone know?
Example: AutomobileTypeId (PK, decimal(10,0), not null)
View 5 Replies
View Related
Dec 8, 2013
I am creating a table on SQL Server. One of the columns in this new table contains whole integer as wells as decimal values (i.e. 4500 0.9876). I currently have this column defined as Decimal(12,4). This adds 4 digits after the decimal point to the whole integers. Is there a data type that will have the decimal point only for decimal values and no decimal point for the whole integers?
View 2 Replies
View Related
Apr 29, 2008
Hello.
My database stores the decimals in Spanish format; "," (comma) as decimal separator.
I need to convert decimal nvarchar values (with comma as decimal separator) as a decimal or int.
Any Case using CAST or CONVERT, For Decimal or Int gives me the following error:
Error converting data type varchar to numeric
Any knows how to resolve.
Or any knows any parameter or similar, to indicate to the Cast or Convert, that the decimal separator is a comma instead a dot.
View 5 Replies
View Related
Jul 24, 2006
Hello!
I would like to cast (convert) data type decimal(24,4) to
decimal(21,4). I could not do this using standard casting function
CAST(@variable as decimal(21,4)) or CONVERT(decimal(21,4),@variable)
because of the following error: "Arithmetic overflow error converting
numeric to data type numeric." Is that because of possible loss of the
value?
Thanks for giving me any advice,
Ziga
View 6 Replies
View Related
Oct 22, 2001
Hi,
I'm getting an error that reads "The conversion of a char data type to a datetime data type resulted in an out of range value data time value"
for the following view sql:
CONVERT (datetime, System . dbo.zStatus.MyDate)
MyDate is a char(8)
Any suggestions?
Thanks,
Denise
View 2 Replies
View Related
Feb 14, 2007
I am attempting to install SQL Server 2005 Developer Edition onto a Windows XP Pro SP2 machine, but unfortunately each time that I attempt to install I receive an error message in the summary log as follows:
Product : Microsoft SQL Server 2005
Product Version: 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup
Last Action : InstallFinalize
Error String : The setup has encountered an unexpected error while Updating Installed Files.
The error is : Fatal error during installation.
Error Number : 29528
There is probably a simple solution for the issue but unfortunately I am unaware of what it is? I can€™t tell if the issue is specific to registry settings, security, file types, etc€¦ The information below surrounds the error w/in the log, any suggestions would be greatly appreciated?
Thanks, Jennifer
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetTargetFolder(Folder=C:WINNTsystem32)
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetSourceFolder(Folder=1System)
MSI (s) (6C:94) [16:02:23:713]: Executing op: FileCopy(SourceName=sqlctr90.dll,SourceCabKey=sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A,DestName=sqlctr90.dll,Attributes=16384,FileSize=66264,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,Version=2005.90.1399.0,Language=1033,InstallMode=58982400,,,,,,,)
MSI (s) (6C:94) [16:02:23:713]: File: C:WINNTsystem32sqlctr90.dll; To be installed; Won't patch; No existing file
MSI (s) (6C:94) [16:02:23:713]: Source for file 'sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A' is compressed
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2318 2: C:WINNTsystem32sqlctr90.dll
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:723]: Executing op: CacheSizeFlush(,)
MSI (s) (6C:94) [16:02:23:723]: Executing op: InstallProtectedFiles(AllowUI=0)
MSI (s) (6C:94) [16:02:23:723]: Executing op: ActionStart(Name=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,,)
MSI (s) (6C:94) [16:02:23:733]: Executing op: CustomActionSchedule(Action=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,ActionType=1025,Source=BinaryData,Target=InstallFTERef,CustomActionData=C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef|C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData)
MSI (s) (6C:2C) [16:02:23:743]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64E.tmp, Entrypoint: InstallFTERef
FTECa.DLL: INFO: FTE: InstallFTERef(), Entering...
FTECa.DLL: INFO: FTE: GetFTERefInstallParams: FTERef : C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseCHS.txt Size=1000 IDR=1696
.
.
.
.
.
.
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sSVE.xml Size=1035 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTHA.txt Size=1036 IDR=697
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTHA.xml Size=1037 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTRK.txt Size=1038 IDR=2224
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing registry updates,)
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTRK.xml Size=1039 IDR=1142
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1345,Source=BinaryData,Target=Rollback_UpdateETWMOFWithGUID,CustomActionData=100Removing registry updates100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Updating Installed Files,)
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_UpdateETWMOFWithGUID,CustomActionData=010Updating Installed Files100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:10) [16:02:24:464]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64F.tmp, Entrypoint: Do_UpdateETWMOFWithGUID
<Func Name='LaunchFunction'>
Function=Do_UpdateETWMOFWithGUID
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_UpdateETWMOFWithGUID
PerfTime Start: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
<Func Name='Do_UpdateETWMOFWithGUID'>
Calling installSqlEvent Trance
The arguments that are passed to InstallSqlEventTrace are InstanceName: MSSQLSERVER , ProductCodeL: {2373A92B-1C1C-4E71-B494-5CA97F96AA19} , BinPath: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
INFO: Checking installed version
INFO: Writing MOF file
ERROR: Unable to open registry key: HRESULT = 0x80070005, Key = SYSTEMCurrentControlSetControlWMISecurity
The value returned is -2147024891
<EndFunc Name='Do_UpdateETWMOFWithGUID' Return='1603' GetLastError='0'>
PerfTime Stop: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
Gathering darwin properties for failure handling.
Error Code: 1603
MSI (s) (6C!D0) [16:02:37:273]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
<EndFunc Name='LaunchFunction' Return='1603' GetLastError='203'>
MSI (s) (6C:94) [16:02:37:283]: User policy value 'DisableRollback' is 0
MSI (s) (6C:94) [16:02:37:283]: Machine policy value 'DisableRollback' is 0
Action ended 16:02:37: InstallFinalize. Return value 3.
View 8 Replies
View Related
Sep 19, 2007
I wanted to convert a dataset from vb.net (2.0) to an .XLS file, by MS Jet. My national standard is using decimal commas, not decimal points for numbers signing the beginning of decimal places.
But the MS Jet Engine uses decimal point,in default. Therefore, in the Excel file only string formatted cells can welcome this data, not number formatted.
How can I solve or get around this problem? (with jet if it possible)
iviczl
View 4 Replies
View Related
Jun 19, 2006
Hi,
I'm trying to import a text-file into SQL2005 by using SSIS. Unfortunately it doesn't seem to work in the way I thought. Because I'm using the german version of SQL2005 I need to translate the items of my toolbox, so dont wonder if their names are not exactly the same as in the english versions.
Try number1:
a) My datasource is a flatfile, in the connection manager I changed the DataType for the input column to DT_DECIMAL. In my destination table the data type of ths column is decimal(20,4). Name of the column is "NXT_PUT_PX".
b) Running this package results in this error:
"Fehler bei der Datenkonvertierung. Die Datenkonvertierung für die NXT_PUT_PX-Spalte gab den Statuswert '2' und den Statustext 'Der Wert konnte aufgrund eines möglichen Datenverlustes nicht konvertiert werden.' zurück. Fehlercode: 0xC0209084. "
Translation of this is something like:
Error by converting data. Converting data for column NXT_PUT_PX returned state '2' and text 'Value couldn't be converted because of a potential loss of data'.
Try number2:
a) same as try number1
b) Adding a datatransformation-task (Datenkonvertierung), and set NXT_PUT_PX to be converted to DT_DECIMAL wirh SCALE 20.
c) Assigning this converted column to the destination column.
d) Running the package results in the same error as described above.
Try number3:
Same as try number 2 but the input column for my flatfile is now DT_WSTR with width 50.
Running this results in the same error message as above, but different errorcode. Errorcode is 0xC020907F.
Any hints how to do this conversion correct?
Best regards,
Jan Wagner
View 11 Replies
View Related
Jul 23, 2005
I'd like to convert a Decimal value into a string so that the entireoriginal value and length remains intact but there is no decimal point.For example, the decimal value 6.250 is selected as 06250.Can this be done?
View 6 Replies
View Related
Nov 30, 2007
Hi all,
I am designing some reports for a German branch of my company and need to replace decimal point with a comma and the thousand comma seperator with a decimal point.
e.g.
‚¬1,500,123.00 to ‚¬1.500.123,00
Is there a property that I can change in the report designer to allow this to happen or is this something I need to convert in a Stored Proc.
Any help would be much appreciated
Thanks!
View 5 Replies
View Related
Nov 26, 2003
Hi everyone, this is the exception:
System.Data.SqlClient.SqlException: The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value
Here's my code!
... 'datagrid code
cmdSelect.CommandText = "SELECT * FROM [Table] WHERE [Date and Time] > '" & Me.tbFromDate.Text & "' AND [Date and Time] < '" & Me.tbToDate.Text & "'"
...
Me.tbFromDate.Text and Me.tbFromDate.text look like this: 27/11/2003 1:11:43 PM
The SQL Query works fine - just that this code gives a runtime error.
Can someone help?? I'm guessing I have to do somekind of conversion!!
Andrew
View 1 Replies
View Related
Apr 26, 2008
$picid = $_GET['picid'];
$commentby= $_REQUEST['commentby'];
$commentby= filter_text($commentby);
$commentby= mysql_real_escape_string($commentby);
$comment= $_REQUEST['comment'];
$comment= filter_text($comment);
$comment= mysql_real_escape_string($comment);
$action = $_REQUEST['action'];
if($action == 'post_comment'){
$insert_comment = "INSERT INTO comments ( picid, comment, commentdate, commentby) VALUES ('".$picid."', '".$comment."', CURRENT_TIMESTAMP, '".$commentby."')";
if (!mysql_query($insert_comment))
{
die('Error: ' . mysql_error());
}
header("Location: ");
}
returns-
Error: Out of range value adjusted for column 'picid' at row 1
picid is of int datatype :/
View 12 Replies
View Related
Feb 8, 2008
Hello All,
I am using SQL 2005 SP2. I have a table partitioned on date range. I am trying to SWITCH, MERGE and SPLIT partitions.
My SWITCH and MERGE work great. When the SPLIT query is executed, an error 9002 is thrown....
"The transaction log for database is full. To find out why space in log cannot be resued, see log_reuse_wait_desc column in sys.databases."
Below are more details...
- All SWITCH, MERGE and SPLIT are executed in one TRANSACTION.
- After SWITCH and MERGE, I execute a query set the partition scheme "NEXT USED [PRIMARY]".
- Finally i execute SPLIT statement.
Could you please tell me where am I going wrong?
Any help would be appreciated.
Thanks..................
View 2 Replies
View Related
Aug 16, 2006
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies
View Related
Jan 8, 2008
Hi all i have setup merge replication with one publisher and 3 subscribers
The replication worked fine for about 2 months then i recieved the following error on all my subscriptions
The Publisher failed to allocate a new set of identity ranges for the subscription.
This can occur when a Publisher or a republishing Subscriber has run out of identity
ranges to allocate to its own Subscribers or when an identity column data type does
not support an additional identity range allocation. If a republishing Subscriber has
run out of identity ranges, synchronize the republishing Subscriber to obtain more
identity ranges before restarting the synchronization. If a Publisher runs out of identit
(Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199417)
Get help: http://help/MSSQL_REPL-2147199417
I have updated my sql server to service pack 2
The publisher is sql Standard edition and the subscribers are Express edition
Any help would be great
Thanx
View 3 Replies
View Related
Sep 15, 2006
I am embedding the ReportViewer in an aspx page and the report comes up fine, but when I press the "Next Page" or "Last Page" buttons, I get the error: "Page navigation is out of range".
The application has session state turned off.
The problem occurs whether or not the viewstate for ReportViewer is turned on or off.
How can I fix this problem?
View 15 Replies
View Related
Jul 23, 2005
I've a SQL view performing a number of very precise calculations ie.495/(1.112 - (.00043499*((Col1 + Col2 + Col3))) + ( .00000055 * ((Col1+ Col2 + Col3)) * ((Col1 + Col2 + Col3))) - (.00028826 * Col4))) -450)/100Obviously this sometimes causes a precision issues because the floatand real datatypes don't hold precise values... My problem is thatconverting to the numeric or decimal datatype easily produces an errorif the precision is not big enough to hold the resulting output... Sohere's my questions:Does anyone see a problem with me maxing out the precision of thedecimal datatype (ie. use DECIMAL(38,8) across a couple dozeninter-related formulas?So the above code would now exec like this:495/(CONVERT(DECIMAL(38,8),1.112) -(CONVERT(DECIMAL(38,8),.00043499)*((Col1 + Col2 + Col3))) +(CONVERT(DECIMAL(38,8),.00000055) * ((Col1 + Col2 + Col3)) * ((Col1 +Col2 + Col3))) - (CONVERT(DECIMAL(38,8),.00028826) * Col4))) - 450)/100If anyone does see a problem with this approach, could you suggestanother alternative?
View 1 Replies
View Related
Mar 7, 2006
Hi all,I am getting this error when insert values from one table to another inthe first table the values are varchar (10). In the second they aredatetime. The format of the data is mm/dd/yyyy to be easily convertedto dates. The conversion in this case is implicit as indicated in SQLServer documentation. Here is my query:INSERT INTO Campaign (CampaignID, Name, DateStart, DateEnd, ParentID,ListID)SELECT mysqlfactiva.dbo.campaigns.campaign_id AS CampaignID,mysqlfactiva.dbo.campaigns.campaign_name AS Name,MIN(mysqlfactiva.dbo.programs.start_date) AS DateStart,MIN(mysqlfactiva.dbo.programs.end_date) AS DateEnd,NULL AS ParentID,NULL AS ListIDFROM mysqlfactiva.dbo.campaigns, mysqlfactiva.dbo.programsWHERE mysqlfactiva.dbo.campaigns.campaign_id =mysqlfactiva.dbo.programs.campaign_idGROUP BY mysqlfactiva.dbo.campaigns.campaign_id,mysqlfactiva.dbo.campaigns.campaign_name,mysqlfactiva.dbo.campaigns.descriptionUNIONSELECT program_id + 100000, program_name, start_date, end_date,campaign_id AS ParentID, NULL AS ListIDFROM mysqlfactiva.dbo.programsUNIONSELECT execution_id + 200000, execution_name, start_date,end_date, program_id + 100000 AS ParentID, NULL AS ListIDFROM mysqlfactiva.dbo.executionsUNIONSELECT wave_id + 300000, wave_name, start_date, end_date,mysqlfactiva.dbo.waves.execution_id + 200000 AS ParentID, NULL ASListIDFROM mysqlfactiva.dbo.waves, mysqlfactiva.dbo.executionsWHERE mysqlfactiva.dbo.waves.execution_id =mysqlfactiva.dbo.executions.execution_idI am referencing programs table two times. If I just select this all Iget all data I need. When doing insert I get a message:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value. The statement has been terminated.If I execute just first part of the query before first union, I insertdata fine:INSERT INTO Campaign (CampaignID, Name, DateStart, DateEnd, ParentID,ListID)SELECT mysqlfactiva.dbo.campaigns.campaign_id AS CampaignID,mysqlfactiva.dbo.campaigns.campaign_name AS Name,MIN(mysqlfactiva.dbo.programs.start_date) AS DateStart,MIN(mysqlfactiva.dbo.programs.end_date) AS DateEnd,NULL AS ParentID,NULL AS ListIDFROM mysqlfactiva.dbo.campaigns, mysqlfactiva.dbo.programsWHERE mysqlfactiva.dbo.campaigns.campaign_id =mysqlfactiva.dbo.programs.campaign_idGROUP BY mysqlfactiva.dbo.campaigns.campaign_id,mysqlfactiva.dbo.campaigns.campaign_name,mysqlfactiva.dbo.campaigns.descriptionAs soon as I use union I get the above error. This is very strangesince even when I execute the query using first union where the datescome from the same table 'programs' I get the error. Why I can insertfrom programs first time and can's second time?Any help will be appreciated.Thanks,Stan
View 1 Replies
View Related
Nov 10, 2005
I am unable to migrate any DTS packages, from a SQL Server 2000 package, from a structured storage file, or from a DTS package imported into SQL2005 (Developer Edition, 32 bit). Running the Package Migration Wizard, every time I get to the List Package screen, i get the error below. I haven't found any other mention of this so far. Anyone else seen this error or have suggestions?
View 20 Replies
View Related
Oct 31, 2006
One single table when openen from a MSAccess project file gives error:
The setting for DecimalPlaces property must be from 0 through 15, 255 for Auto (default).
After which the table is openend normally. I don't recall setting Decimal Places to the table. The only numeric fields are two INTs that are also ID's (PK and FK). This error occurs also when recreating the db project. These fields can not be edited eitther from MSAccess nor Enterprise Manager.
What can be done on the table, resp. MSAccess to change this?
View 3 Replies
View Related
Aug 20, 2007
I've a report whose columns are returned from a stored procedure. Now I want to display the report based on a date range. The date field is Received. It's in dbo.master. I added 2 parameters start date and end date. When I check the condition if dbo.master.Received>StartDate and dbo.master.Received < EndDate directly I'm getting error. Could someone tell me what mistake I'm doing? Thanks for your help!ALTER Procedure [dbo].[USP_Reports_NewTier1]
@ClientCode VARCHAR(7) = '',@UserID INT = 0
,@OrderID INT =0
,@StartDate datetime,@EndDate datetime
IF @ClientCode <> '' and dbo.master.Received > StartDate and dbo.master.Received<EndDateBEGIN SELECT --Root Select --ClientName @ClientName = (Select Name FROM dbo.customer c WHERE c.Customer = @ClientCode) ,@TotalDollarValue = (SELECT SUM(m.current1-m.paid1) FROM dbo.master m WHERE phase=1 AND m.Customer = @ClientCode AND M.Status <> 'PIE')
,@AverageAge = ISNULL((select avg(age) from (select datediff(day,Received,CASE WHEN clidlp>clidlc then clidlp else clidlc END)* -1 as age from dbo. master M WHERE phase=1 AND customer = @ClientCode AND M.Status <> 'PIE') x),0)END
View 3 Replies
View Related
Jun 18, 2007
I need to store decimal values: decimal(20,15) in my SQL Server 2005 database.
I load data from flat file, convert it using Data Conversion Task to decimal(with scale: 15) and try to save it using OLE DB Destination.
It works fine for 4 digits after the decimal (like 1.1234), but always failes for more than 4 digits (1.12345).
Is the decimal limited to scale 4 ???
Thank you for your help!
Anna
View 3 Replies
View Related
Jun 4, 2007
Hi,
I am having a file in which amount fields are given in a Packed Decimal format. Can anyone suggest me how I can read this data element from the file and convert it into SQL decimal datatype.
File is a fixed length. All the amount fields are given in Packed Decimal Format and rest of the fields are given in text format.
How can i identify and convert only those packed decimals using SQL/.Net.
Example : a row in a file that has some packed decimals
158203508540188236252EUR20BZK0030 Å“&
20060715 0001010100010101
Please help!
Thanks
Mirudhu
View 4 Replies
View Related
May 28, 2015
I have a execute sql task which insert data into a table, but before that I need to make sure no data is available for particular date. we have a table where we are defining date for which date we want to data, and we are fetching that particular date using ssis variable 'Date'. today I was trying to load data dor '2015-05-10'. But it gave me error like '[Execute SQL Task] Error: "Value does not fall within the expected range.'. Below are the my execute sql task query:
delete from STG_Shipped_Invoiced
where Transaction_Date=?
INSERT INTO STG_Shipped_Invoiced (div_Code, inv_inv_id, tot_Net_Amt,
trans_date, trans_type, Created_date, Transaction_Date)
select inv.DIV_CODE as Div_Code, inv.INV_ID as inv_inv_id, inv.TOT_NET_AMT as Tot_Net_Amt,
[Code] ....
Here I have defined a variable 'Date', where we are passing the date. Am i doing anything wrong with the delete query?
View 0 Replies
View Related
Nov 5, 2001
Hi....Whenever I try to update the database and include an apostrophe ....then I get an error that says 'Incorrect Syntax' ....I will be very greatful if u could help me out with this.....
View 3 Replies
View Related
Oct 28, 2004
Hi all,
I'm getting an error when updating my database. The connection is fine and the dropdown menu is good also so i think it's the way i've formed my sql string. Here's the line i think i'm having probs with:
SQLString = "UPDATE project_descriptions SET " & _
"lecturer_name = '" & Replace(LecturerName.Text,"'","''") & "'," & _
"project_title = '" & Replace(ProjectTitle.Text,"'","''") & "', " & _
"Project_description = '" & Replace(ProjectDescription.Text,"'","''") & "'," & _
" WHERE project_code = '" & ProjectCode.SelectedItem.Value & "'"
Can anyone rearrange it so i stop getting an error?
Here's my code. if it helps.
<%@ Import Namespace="System.Data.OleDb" %>
<SCRIPT language="VB" runat="server">
Dim DBConnection As OleDbConnection
Dim DBCommand As OleDbCommand
Dim DBReader As OleDbDataReader
Dim SQLString As String
Sub Page_Load
If Not Page.IsPostBack Then
'-- Load drop-down list with item numbers
DBConnection = New OleDbConnection("Provider=Microsoft.Jet.OleDb.4.0;Data Source=C:finalyearproject2projectallocation.mdb")
DBConnection.Open()
SQLString = "SELECT project_code FROM project_descriptions ORDER BY project_code"
DBCommand = New OleDbCommand(SQLString, DBConnection)
DBReader = DBCommand.ExecuteReader()
ProjectCode.DataSource = DBReader
ProjectCode.DataTextField = "project_code"
ProjectCode.DataValueField = "project_code"
ProjectCode.DataBind()
DBReader.Close()
DBConnection.Close()
End If
End Sub
Sub SelectRecord (Src As Object, Args As EventArgs)
DBConnection = New OleDbConnection("Provider=Microsoft.Jet.OleDb.4.0;Data Source=C:finalyearproject2projectallocation.mdb")
DBConnection.Open()
SQLString = "SELECT * FROM project_descriptions WHERE " & _
"project_code = '" & ProjectCode.SelectedItem.Value & "'"
DBCommand = New OleDbCommand(SQLString, DBConnection)
DBReader = DBCommand.ExecuteReader()
DBReader.Read()
LecturerName.Text = DBReader("lecturer_name")
ProjectTitle.Text = DBReader("project_title")
ProjectDescription.Text = DBReader("project_description")
DBReader.Close()
DBConnection.Close()
UpdateButton.Visible = True
End Sub
Sub UpdateRecord (Src As Object, Args As EventArgs)
'-- CHECK FOR VALID RECORD ---
Dim ValidRecord As Boolean = True
'-- Check for missing Project Title
If ProjectTitle.Text = "" Then
ProjectTitleMessage.Text = "Missing Project Title"
ValidRecord = False
End If
'-- Check for missing Lecturer Name
If LecturerName.Text = "" Then
LecturerNameMessage.Text = "Missing Lecturer Name"
ValidRecord = False
End If
'-- Check for missing Project Description
If ProjectDescription.Text = "" Then
ProjectDescriptionMessage.Text = "Missing Project Description"
ValidRecord = False
End If
If ValidRecord = True Then
'-- UPDATE A RECORD --
Try
DBConnection = New OleDbConnection("Provider=Microsoft.Jet.OleDb.4.0;Data Source=C:finalyearproject2projectallocation.mdb")
DBConnection.Open()
SQLString = "UPDATE project_descriptions SET " "lecturer_name = '" & Replace(LecturerName.Text,"'","''") & "'," "project_title = '" & Replace(ProjectTitle.Text,"'","''") & "', " "Project_description = '" & Replace(ProjectDescription.Text,"'","''") & "'," " WHERE project_code = '" & ProjectCode.SelectedItem.Value & "'"
DBCommand = New OleDbCommand(SQLString, DBConnection)
DBCommand.ExecuteNonQuery
DBConnection.Close()
UpdateMessage.Text = "Record updated"
Catch
UpdateMessage.Text = "Update problem. Record not changed. " & SQLString
End Try
End If
End Sub
</SCRIPT>
<html>
<head>
<style>
.head {font-family:arial; font-size:12pt; font-weight:bold; width:560px;
border:outset 1 #F0F0F0; padding:2pt; background-color:#990000;
color:#FFFFFF; text-align:center}
.box {font-family:arial; font-size:8pt; line-height:9pt; width:200px;
height:20px; overflow:auto}
.right {text-align:right}
.center {text-align:center}
table {font-family:arial; font-size:8pt; line-height:9pt; width:560px;
background-color:#F9F9F9; border-collapse:collapse}
th {font-family:arial; font-size:8pt; line-height:14pt;
font-weight:bold; text-align:center; vertical-align:bottom;
background-color:#990000; color:#FFFFFF}
td {font-family:arial; font-size:8pt; line-height:9pt;
vertical-align:top}
</style>
</head>
<body>
<form runat="server">
<div class="head">Project Update</div>
<table id="UpdateTable" border="1" rules="rows">
<tr>
<th> Project Code: </th>
<td><asp:DropDownList id="ProjectCode" runat="server"/>
<asp:Button Text="Select" OnClick="SelectRecord" runat="server"/>
</td>
<td></td>
</tr>
<tr>
<th> Lecturer Name: </th>
<td><asp:TextBox id="LecturerName" runat="server"
Columns="40"
MaxLength="50"/></td>
<td><asp:Label id="LecturerNameMessage" runat="server"
ForeColor="#FF0000"
EnableViewState="False"/></td>
</tr>
<tr>
<th> Project Title: </th>
<td><asp:TextBox id="ProjectTitle" runat="server"
Columns="40"
MaxLength="50"/></td>
<td><asp:Label id="ProjectTitleMessage" runat="server"
ForeColor="#FF0000"
EnableViewState="False"/></td>
</tr>
<tr>
<th> Project Description: </th>
<td><asp:TextBox id="ProjectDescription" runat="server"
TextMode="MultiLine"
Columns="45"
rows="3"/></td>
<td><asp:Label id="ProjectDescriptionMessage" runat="server"
ForeColor="#FF0000"
EnableViewState="False"/></td>
</tr>
</asp:Panel>
</table>
<br>
<asp:Button id="UpdateButton" runat="server"
Text="Update Record"
Visible="False"
OnClick="UpdateRecord"/>
<asp:Label id="UpdateMessage" runat="server"
ForeColor="#FF0000"
EnableViewState="False"/>
</form>
</body>
</html>
View 4 Replies
View Related
Jun 2, 2006
Sorry if this is a dumb question but I am just learning ASP.NET. My database is on a server running SQL Server 2000 and I have used Dreamweaver to build sites. I am trying to convert to ASP.NET.
The problem I am having is that data is not updating when I change it in a GridView, DataList, etc. I have tried including the user name an password in the connection string without success. What did I miss?
connectionString="Data Source=<ServerName>;Initial Catalog=<DatabaseName>;Integrated Security=True;Uid=sa;Pwd=<Password>;"
This is the string I use in Dreamweaver which works;Driver={SQL Server};Server=<ServerName>;Database=<DatabaseName>;Uid=sa;Pwd=<Password>;
View 2 Replies
View Related
Oct 19, 2005
I was updating few indexes in one of my database tables when I got this warning message:
"Warning! The maximum key length is 900 bytes. The index 'IX_cc_statusText' has maximum length of 1024 bytes. For some combination of large values, the insert/update operation will fail."
Can anyone help me out as to:
1. Why this warning was thrown?
2. What are the implications of the same?
3. How to rectify this?
Here is the script I was using to update the indexes:
CREATE INDEX [cc_programEnrollment14] ON [dbo].[cc_programEnrollment]([cc_company_uid]) ON [PRIMARY]
GO
CREATE INDEX [IX_cc_program_uid] ON [dbo].[cc_programEnrollment]([cc_program_uid]) ON [PRIMARY]
GO
CREATE INDEX [IX_cc_status_uid] ON [dbo].[cc_programEnrollment]([cc_status_uid]) ON [PRIMARY]
GO
CREATE INDEX [IX_cc_CompanyID] ON [dbo].[cc_programEnrollment]([cc_CompanyID]) ON [PRIMARY]
GO
CREATE INDEX [IX_cc_statusText] ON [dbo].[cc_programEnrollment]([cc_statusText]) ON [PRIMARY]
GO
CREATE INDEX [IX_cc_initiatedDate] ON [dbo].[cc_programEnrollment]([cc_initiatedDate]) ON [PRIMARY]
GO
CREATE INDEX [IX_cc_initiatedBy_uid] ON [dbo].[cc_programEnrollment]([cc_initiatedBy_uid]) ON [PRIMARY]
GO
CREATE INDEX [IX_cc_SponsorID] ON [dbo].[cc_programEnrollment]([cc_SponsorID]) ON [PRIMARY]
GO
CREATE INDEX [IX_cc_SponsorDistributor_uid] ON [dbo].[cc_programEnrollment]([cc_SponsorDistributor_uid]) ON [PRIMARY]
GO
CREATE INDEX [IX_cc_programEnrollment] ON [dbo].[cc_programEnrollment]([cc_isDealerEligible], [cc_uid]) ON [PRIMARY]
GO
Thanks in advance
Dexter
View 1 Replies
View Related
Dec 29, 2005
I am trying to update one of the databases Jobs table Via an asp page because the amount of text in the field is too large to to be added via the DTS import wizard. I keep getting the following error.
Microsoft OLE DB Provider for ODBC Drivers error '80040e37'
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'Jobs'.
The table Jobs definately exists in the database. I double checked the System DSN to make sure that it was pointing to this database. What do I need to look for to fix this?
oops, Forgot to show the sql statement this is using, I am using ADO to insert the data vs using an Update Query because of the number of apostrophe's etc in the variables.
SELECT description FROM Jobs WHERE JobID = 1
Miranda
View 2 Replies
View Related
Nov 26, 2014
I'm running a pre-defined script which used to work fine on a file which was resupplied every month. below is the script used and the error message. looking at the error I assume that there is a rouge record within the file but have looked in Textpad and cannot find it.
UPDATE [matching].[dbo].[hot_nov] SET [AOV] = (CAST([Demand] AS DECIMAL)/CAST([Orders] AS INT)) WHERE [Demand] <> '';
UPDATE [matching].[dbo].[hot_nov] SET [POST2] = left([PostCode], PATINDEX('%[0-9]%', [PostCode] + '1') - 1) ;
UPDATE [matching].[dbo].[hot_nov] SET [POST4] = left([PostCode],LEN([PostCode])-4);
UPDATE [matching].[dbo].[hot_nov] SET [POST6] = left([PostCode],LEN([PostCode])-2);
error message
(1000 row(s) affected)
Msg 245, Level 16, State 1, Line 181
Conversion failed when converting the varchar value '2014-09-03 00:00:00' to data type int.
View 5 Replies
View Related
