Hi,
I'm getting an error that reads "The conversion of a char data type to a datetime data type resulted in an out of range value data time value"
for the following view sql:
CONVERT (datetime, System . dbo.zStatus.MyDate)
MyDate is a char(8)
Any suggestions?
Thanks,
Denise
Hi
I am trying to make a custom task. The custom task has one input, which i map to externalmetadata column in the task and one output.
When i run the task it fails with this error ( I am putting the whole SSIS message)
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0047062 at Data Flow Task, Lib [2387]: System.ArgumentException: Value does not fall within the expected range.
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSBuffer90.DirectRow(Int32 hRow, Int32 lOutputID)
at Microsoft.SqlServer.Dts.Pipeline.PipelineBuffer.DirectRow(Int32 outputID)
at Lib1.LibPM.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Lib" (2387) failed with error code 0x80070057. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x80070057.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Flat File Destination" (1855)" wrote 0 rows.
Task failed: Data Flow Task
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
----------------------------
This is my piece of code which is trying to put the data in the output buffer (ProcessInput function).
int GoodOutputId = -1;
IDTSInput90 inp = ComponentMetaData.InputCollection.GetObjectByID(inputID);
//GetErrorOutputInfo(ref errorOutputID, ref errorOutputIndex);
GoodOutputId = ComponentMetaData.OutputCollection[0].ID;
System.Console.Write("Here i am");
System.Console.Write(GoodOutputId);
if (!buffer.EndOfRowset)
{
while (buffer.NextRow())
{
if (_inputColumnInfos.Length == 0)
{
buffer.DirectRow(GoodOutputId);
}
else
{
buffer.DirectRow(GoodOutputId);
}
}
}
I have put any code in the else part as i am just trying to run the task as of now and later put the functionality in it.
Please let me know if i have missed something. Thanks in advance.
Vipul
I am trying to update a database that has decimal(4,1) in a field. It can hold 100, but when I change a value in a gridview to 100 and update it, I get the error below. Any reason wny? Parameter value '100.0' is out of range.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.ArgumentException: Parameter value '100.0' is out of range.
Source Error:
Line 1841: int returnValue;Line 1842: try {Line 1843: returnValue = command.ExecuteNonQuery();Line 1844: }Line 1845: finally {
Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesmyprofile45e0ea66e9c9d282App_Code._wfrgryw.27.cs Line: 1843
Stack Trace:
[ArgumentException: Parameter value '100.0' is out of range.] System.Data.SqlClient.TdsParser.TdsExecuteRPC(_SqlRPC[] rpcArray, Int32 timeout, Boolean inSchema, SqlNotificationRequest notificationRequest, TdsParserStateObject stateObj) +4085 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1021 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +314 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +413 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +11 5 StatisticsDALTableAdapters.StatisticsTableAdapter.UpdateStatistics(Nullable`1 ID, Nullable`1 PlayerID, Nullable`1 FG, Nullable`1 TTP, Nullable`1 FT, Nullable`1 RPG, Nullable`1 DEFR, Nullable`1 OFFR, Nullable`1 APG, Nullable`1 SPG, Nullable`1 BPG, Nullable`1 Turnovers, Nullable`1 PPG, String SYear, String EYear, String StatisticsType) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesmyprofile45e0ea66e9c9d282App_Code._wfrgryw.27.cs:1843 YourHoopSpace.BLL.StatisticsBLL.UpdateStatistic(Int32 ID, Int32 playerID, Nullable`1 fg, Nullable`1 ttp, Nullable`1 ft, Nullable`1 rpg, Nullable`1 defr, Nullable`1 offr, Nullable`1 apg, Nullable`1 spg, Nullable`1 bpg, Nullable`1 turnovers, Nullable`1 ppg, String sYear, String eYear, String statisticsType) in f:MyProfileApp_CodeBLLStatisticsBLL.cs:128
Hi everyone, this is the exception:
System.Data.SqlClient.SqlException: The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value
Here's my code!
... 'datagrid code
cmdSelect.CommandText = "SELECT * FROM [Table] WHERE [Date and Time] > '" & Me.tbFromDate.Text & "' AND [Date and Time] < '" & Me.tbToDate.Text & "'"
...
Me.tbFromDate.Text and Me.tbFromDate.text look like this: 27/11/2003 1:11:43 PM
The SQL Query works fine - just that this code gives a runtime error.
Can someone help?? I'm guessing I have to do somekind of conversion!!
Andrew
$picid = $_GET['picid'];
$commentby= $_REQUEST['commentby'];
$commentby= filter_text($commentby);
$commentby= mysql_real_escape_string($commentby);
$comment= $_REQUEST['comment'];
$comment= filter_text($comment);
$comment= mysql_real_escape_string($comment);
$action = $_REQUEST['action'];
if($action == 'post_comment'){
$insert_comment = "INSERT INTO comments ( picid, comment, commentdate, commentby) VALUES ('".$picid."', '".$comment."', CURRENT_TIMESTAMP, '".$commentby."')";
if (!mysql_query($insert_comment))
{
die('Error: ' . mysql_error());
}
header("Location: ");
}
returns-
Error: Out of range value adjusted for column 'picid' at row 1
picid is of int datatype :/
Hello All,
I am using SQL 2005 SP2. I have a table partitioned on date range. I am trying to SWITCH, MERGE and SPLIT partitions.
My SWITCH and MERGE work great. When the SPLIT query is executed, an error 9002 is thrown....
"The transaction log for database is full. To find out why space in log cannot be resued, see log_reuse_wait_desc column in sys.databases."
Below are more details...
- All SWITCH, MERGE and SPLIT are executed in one TRANSACTION.
- After SWITCH and MERGE, I execute a query set the partition scheme "NEXT USED [PRIMARY]".
- Finally i execute SPLIT statement.
Could you please tell me where am I going wrong?
Any help would be appreciated.
Thanks..................
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies View RelatedHi all i have setup merge replication with one publisher and 3 subscribers
The replication worked fine for about 2 months then i recieved the following error on all my subscriptions
The Publisher failed to allocate a new set of identity ranges for the subscription.
This can occur when a Publisher or a republishing Subscriber has run out of identity
ranges to allocate to its own Subscribers or when an identity column data type does
not support an additional identity range allocation. If a republishing Subscriber has
run out of identity ranges, synchronize the republishing Subscriber to obtain more
identity ranges before restarting the synchronization. If a Publisher runs out of identit
(Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199417)
Get help: http://help/MSSQL_REPL-2147199417
I have updated my sql server to service pack 2
The publisher is sql Standard edition and the subscribers are Express edition
Any help would be great
Thanx
I am embedding the ReportViewer in an aspx page and the report comes up fine, but when I press the "Next Page" or "Last Page" buttons, I get the error: "Page navigation is out of range".
The application has session state turned off.
The problem occurs whether or not the viewstate for ReportViewer is turned on or off.
How can I fix this problem?
Hi all,I am getting this error when insert values from one table to another inthe first table the values are varchar (10). In the second they aredatetime. The format of the data is mm/dd/yyyy to be easily convertedto dates. The conversion in this case is implicit as indicated in SQLServer documentation. Here is my query:INSERT INTO Campaign (CampaignID, Name, DateStart, DateEnd, ParentID,ListID)SELECT mysqlfactiva.dbo.campaigns.campaign_id AS CampaignID,mysqlfactiva.dbo.campaigns.campaign_name AS Name,MIN(mysqlfactiva.dbo.programs.start_date) AS DateStart,MIN(mysqlfactiva.dbo.programs.end_date) AS DateEnd,NULL AS ParentID,NULL AS ListIDFROM mysqlfactiva.dbo.campaigns, mysqlfactiva.dbo.programsWHERE mysqlfactiva.dbo.campaigns.campaign_id =mysqlfactiva.dbo.programs.campaign_idGROUP BY mysqlfactiva.dbo.campaigns.campaign_id,mysqlfactiva.dbo.campaigns.campaign_name,mysqlfactiva.dbo.campaigns.descriptionUNIONSELECT program_id + 100000, program_name, start_date, end_date,campaign_id AS ParentID, NULL AS ListIDFROM mysqlfactiva.dbo.programsUNIONSELECT execution_id + 200000, execution_name, start_date,end_date, program_id + 100000 AS ParentID, NULL AS ListIDFROM mysqlfactiva.dbo.executionsUNIONSELECT wave_id + 300000, wave_name, start_date, end_date,mysqlfactiva.dbo.waves.execution_id + 200000 AS ParentID, NULL ASListIDFROM mysqlfactiva.dbo.waves, mysqlfactiva.dbo.executionsWHERE mysqlfactiva.dbo.waves.execution_id =mysqlfactiva.dbo.executions.execution_idI am referencing programs table two times. If I just select this all Iget all data I need. When doing insert I get a message:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value. The statement has been terminated.If I execute just first part of the query before first union, I insertdata fine:INSERT INTO Campaign (CampaignID, Name, DateStart, DateEnd, ParentID,ListID)SELECT mysqlfactiva.dbo.campaigns.campaign_id AS CampaignID,mysqlfactiva.dbo.campaigns.campaign_name AS Name,MIN(mysqlfactiva.dbo.programs.start_date) AS DateStart,MIN(mysqlfactiva.dbo.programs.end_date) AS DateEnd,NULL AS ParentID,NULL AS ListIDFROM mysqlfactiva.dbo.campaigns, mysqlfactiva.dbo.programsWHERE mysqlfactiva.dbo.campaigns.campaign_id =mysqlfactiva.dbo.programs.campaign_idGROUP BY mysqlfactiva.dbo.campaigns.campaign_id,mysqlfactiva.dbo.campaigns.campaign_name,mysqlfactiva.dbo.campaigns.descriptionAs soon as I use union I get the above error. This is very strangesince even when I execute the query using first union where the datescome from the same table 'programs' I get the error. Why I can insertfrom programs first time and can's second time?Any help will be appreciated.Thanks,Stan
View 1 Replies View RelatedI am unable to migrate any DTS packages, from a SQL Server 2000 package, from a structured storage file, or from a DTS package imported into SQL2005 (Developer Edition, 32 bit). Running the Package Migration Wizard, every time I get to the List Package screen, i get the error below. I haven't found any other mention of this so far. Anyone else seen this error or have suggestions?
View 20 Replies View RelatedI've a report whose columns are returned from a stored procedure. Now I want to display the report based on a date range. The date field is Received. It's in dbo.master. I added 2 parameters start date and end date. When I check the condition if dbo.master.Received>StartDate and dbo.master.Received < EndDate directly I'm getting error. Could someone tell me what mistake I'm doing? Thanks for your help!ALTER Procedure [dbo].[USP_Reports_NewTier1]
@ClientCode VARCHAR(7) = '',@UserID INT = 0
,@OrderID INT =0
,@StartDate datetime,@EndDate datetime
IF @ClientCode <> '' and dbo.master.Received > StartDate and dbo.master.Received<EndDateBEGIN SELECT --Root Select --ClientName @ClientName = (Select Name FROM dbo.customer c WHERE c.Customer = @ClientCode) ,@TotalDollarValue = (SELECT SUM(m.current1-m.paid1) FROM dbo.master m WHERE phase=1 AND m.Customer = @ClientCode AND M.Status <> 'PIE')
,@AverageAge = ISNULL((select avg(age) from (select datediff(day,Received,CASE WHEN clidlp>clidlc then clidlp else clidlc END)* -1 as age from dbo. master M WHERE phase=1 AND customer = @ClientCode AND M.Status <> 'PIE') x),0)END
I have a execute sql task which insert data into a table, but before that I need to make sure no data is available for particular date. we have a table where we are defining date for which date we want to data, and we are fetching that particular date using ssis variable 'Date'. today I was trying to load data dor '2015-05-10'. But it gave me error like '[Execute SQL Task] Error: "Value does not fall within the expected range.'. Below are the my execute sql task query:
delete from STG_Shipped_Invoiced
where Transaction_Date=?
INSERT INTO STG_Shipped_Invoiced (div_Code, inv_inv_id, tot_Net_Amt,
trans_date, trans_type, Created_date, Transaction_Date)
select inv.DIV_CODE as Div_Code, inv.INV_ID as inv_inv_id, inv.TOT_NET_AMT as Tot_Net_Amt,
[Code] ....
Here I have defined a variable 'Date', where we are passing the date. Am i doing anything wrong with the delete query?
I'm running a pre-defined script which used to work fine on a file which was resupplied every month. below is the script used and the error message. looking at the error I assume that there is a rouge record within the file but have looked in Textpad and cannot find it.
UPDATE [matching].[dbo].[hot_nov] SET [AOV] = (CAST([Demand] AS DECIMAL)/CAST([Orders] AS INT)) WHERE [Demand] <> '';
UPDATE [matching].[dbo].[hot_nov] SET [POST2] = left([PostCode], PATINDEX('%[0-9]%', [PostCode] + '1') - 1) ;
UPDATE [matching].[dbo].[hot_nov] SET [POST4] = left([PostCode],LEN([PostCode])-4);
UPDATE [matching].[dbo].[hot_nov] SET [POST6] = left([PostCode],LEN([PostCode])-2);
error message
(1000 row(s) affected)
Msg 245, Level 16, State 1, Line 181
Conversion failed when converting the varchar value '2014-09-03 00:00:00' to data type int.
I have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
The table B stores the item process time. The structure is as below
Item ProcessStartDate ProcessEndDate
V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000
B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000
C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000
I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.
Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.
The result expected is
Table A
Name StartDate EndDate
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000
B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000
C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000
Scenario 2 expected result
Table A
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies View RelatedI have a need to select rows where values in a column are within a range AND ALSO the first row that is highest (MAX) but just UNDER the range. For example:
NAME VAL
Jim 4
John 5
Tom 6
Julie 7
Rich 8
Rob 9
RANGE TO SELECT is 6-8 (inclusive)
Rows with a value in the range are returned (6, 7, & 8) as well as the row with a highest value that is JUST BELOW the range (5)
NAME VAL
John 5
Tom 6
Julie 7
Rich 8
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View RelatedHow do i round a float value to its previous and next tenth place?
Example:
1.34
Previous 10th : 0
Next 10th: 10
45.67
Previous 10th : 40
Next 10th: 50
Basically I am trying to generate range for my FLOAT Column
1.34
Req o/p: Between 0 and 10
45.67
Req o/p: Between 40 and 50
Thanks,
Prakash.P
Prakash.P
The secret to creativity is knowing how to hide your sources!
I have some contracts that run from different times:
jan 2007 to dec 2007
feb 2008 to jan 2009
I would look like to get all values between the months,
I can create it in the cube browser (see link),
but it would like to have it in mdx so it's automatic
calculated. I don't know if it's possible.
http://users.telenet.be/hanavan/question.jpg
thx in advance
is there a way to get a range of records using a query for example if only want rows from 10 to 20
View 7 Replies View Related
I have a order table which has a orderdate and despatchdate
i want to write a query in such a way that i want to get all the details from the table for a range specified date as the oderdate and despatchdate are user
interactable. I search the google to solve this problem but could not find a answer
Is it possible to create a constraint at the database level which implements the needs when cardinallity between two tables is definied as a range in the logical datamodel (examle 1 to 5-10). When yes, how can this be reached? When no, what is the best practise for these situations?
View 5 Replies View RelatedHello All,
I've been trying to get a range of values out of my SQL Server 2000 db without sucess. The field in question has the data type of char(8) and looks like this:
House_numbr_pub (leading spaces in front of each value)
140A
140
141
142
143
144
145
146
147
148
149
150
151
14500
Does anyone know of a sql statement that will return 140-150 including the 140A, but excluding the ' 14500'
Please Help,
James
What is the best way to do a where clause that includes a date range. Ex. WHERE date1 BETWEEN @Begin Date AND @EndDate. I want to include all of the @EndDate.
View 6 Replies View RelatedHi, I have a page working with not problem since 3 years, and now that we've moved our database from a SQL Server 2000 to SQL Server 7 and i receive this error everywhere a date is used.The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The error append on this line "While myReader.Read()" .. what can i do to solve this problem ?Thank you
View 1 Replies View Relatedhi!
i have one datatable with date and some more fields are there in that. i want to query to return values from a particular date to another date. how can i do this? please help me!
thanks in advance!
I want to do a check to see if a number falls within a range specified by the user. Basically, they enter in a min and max value and I return a hit if a number falls inbetween.
I have having trouble with my SQL statement:
Code:
SELECT DISTINCT *
FROM Table
WHERE ( (0=0)
AND
(min.value <= Table.Value <= max.value) )
(This isn't my actual code, but just the logic)
It will return all the results everytime. Does anyone have any suggestions on what I could be missing here?
Thanks in advance!
Hi there:
This one's a bit tricky. I want to be able to take an IP address of a request on my website and find it in a table. Specifically, I need to be able to record IP address RANGES for search engines so that when they attempt to find a page that isn't there, I can programmatically send a 404 header instead of give them the human-friendly page (please don't make suggestions on this - I'm using PHP, etc., and can't send both a 404 header and a human-friendly page).
Anyway. Let's say a search engine has the IP range 33.33.0.0 through 33.33.255.255 (I made that up). if I receive a request from IP 33.33.101.221, how can I store ONE record (as either a regular expression or maybe multiple fields or somehow else) so that I can match that IP? I'm normally pretty good at figuring stuff like this out, but this one has me stumped for the moment.
All help is greatly appreciated.
I'll be posting a similar request on the PHP forum - I hope that's not considered cross-posting.
Jay
Hey all,
I have a table of errors, where many of the records are the same error, with times very close to each other. I want to be able to group by the error number and time. But the time grouping is a special case, it should return the MAX(Time) within the records that are less than 1 minute apart. So if my records were:
Code:
ErrorTime
4561:23:23
4561:23:46
4602:14:34
4602:15:15
4562:22:23
My query should return:
Code:
ErrorMaxTime
4561:23:46
4602:15:15
4562:22:23
I've tried using GROUP BY ... HAVING ... with variations on MAX(Time) and DATEDIFF, but no luck. Any help is appreciated, thanks.
Hi guys,
I have these 3 fields :-
1. Name (varchar)
2. Sex (varchar)
3. DateBirth (datetime)
I want to display data which group by count for Male n Female and devide to 3 range group.
1. 18-21
2. 25-30
3. 35-40
the date different will be count by field datebirth, with year and getdate().
Can anyone help me on this. thx
Regards,
Shaffiq
I am working on a report for staff productivity, and have to get a summary figure for how much productivity was expected for a date range. The problem is that the amount expected from an employee can change if they move from full time to part time etc.
So I have a view that has the begin date, end date, expected daily production # by employee, and have to figure out how to get the multiplication to work correctly.
Example:
Employee 1 had a daily production # of 10 from 1/1/07-3/31/07 and daily production of 5 from 4/1/07 - now
If I run the production report for 1/1/07 - 6/30/07 what I want is one summary figure of for the entire range which would be 10*Datediff(d,1/1/07,3/31/07)+5*Datediff(4/1/07,6/30/07) or 890+450=1340.
Of course the actual date range for the report will be a variable, and the dates for the begin and end of a production date range will be all over the place.
Any quick and easy way to do this?
I have the following table:
ID - Reference - Number
1 - null - 9000
2 - null - 9001
3 - 123 - 9002
4 - 123 - 9003
5 - null - 9004
6 - null - 9005
7 - null - 9006
I need to return the next (TOP 3) consecutive rows where Reference is null. In this case, 9004-9006. I assume a "having" clause but I'm not sure how to do this.