Output And Error Output Write The Same Table At The Same Time, Stall The Process.

Aug 30, 2006

Hi

I have Lookup task to determine if source data should be updated to or insert to the customer table. After Lookup task, the Error Output pipeline will redirect to insert new data to the table and the Output pipeline will update customer table. But these two tasks will be processing at the same time which causes stall on the process. Never end.....

The job is similiart to what Slow Changing Dimention does but it won't update the table at the same time.

What can I do to avoid such situation?

Thanks in advance,

JD

View 4 Replies

Flat File Processing - Cannot Get Error Output To Write

Apr 20, 2007

I cannot seem to get my flat file to write columns in error when inserting into a SQL table. I have tried a few examples from MS and did not get anything written to my flat file output. I have set the Source Error Output on this flat file and it uses a script task to created the error description and then write it to a Flat File Destination.

I am new to SSIS and have not had any formal training on it. However, I am very familiar with VS.Net/c# and SQL 2000 DTS - I need to get this working ASAP as there are 45 total flat files that need to be processed. Once I have this solved for one, the rest will follow suit.

If more details would help, I can provide them.

Kind Regards,

Ron

View 14 Replies View Related

Create Autometed Error Output .txt Named Date/time Of Execution

Jul 17, 2007

Hi all

i build package with error output .

current situation i create file .txt and conf. error flow to redirect rows and write the rows in the file

what i need create autometed file every time package executed contains all rows , named of the execution date ime

thanks & Regards

View 1 Replies View Related

Why Is Table DDL Output In Error?

Apr 11, 2007

I used the oTable.Script method to output the DDL for a Sql Server 2000 user defined table. The result is DDL with an error. I don't think the problem is with DMO itself so I posted this here. Note the 'TEXTIMAGE_ON ' clause. The table does not have a text column, and the DDL will not execute.

CREATE TABLE [MyTable] (
[FilterID] [int] IDENTITY (1, 1) NOT NULL ,
[LoanAgentID] [int] NOT NULL ,
[Key] [varchar] (16) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[IsActive] [int] NOT NULL ,
[tStamp] [timestamp] NOT NULL ,
[Formula] [varchar] (4000) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[_AuditAddDt] [datetime] NOT NULL ,
[_AuditUpdateDt] [datetime] NOT NULL ,
CONSTRAINT [PK_MyTable] PRIMARY KEY CLUSTERED
(
[FilterID]
) WITH FILLFACTOR = 90 ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO

Server: Msg 1709, Level 16, State 1, Line 1
Cannot use TEXTIMAGE_ON when a table has no text, ntext, or image columns.

Any ideas?

Thanks!

View 3 Replies View Related

How Can I Process More Than One Row And Get A New Output Number For Each

Jan 7, 2008

I have the following stored procedure that first inserts a new receiptnumber into a numbercounter table and then uses that number in another insert for a payment. My problem is I'm only getting one new receiptnumber so if there are more than one payment in the second insert it fails because of a constraint on the payment table that will not let the same receiptnumber be used more than once.
I need to Insert a new receiptnumber for each row in the second insert.
How can I do this?
@ReceiptNumber int OUTPUTASBEGININSERT INTO tblNumberCounter (InsertDate)Values (GETDATE())SET @ReceiptNumber=SCOPE_IDENTITY()INSERT INTO tblReceipts (pl_ID,client_ID,PaymentDate,Fund_ID,TenderTypeID,AmountPaid,ReceiptNumber,DateEntered,EnteredBy) SELECT PL.Pl_ID, RS.client_id, PL.pmtDate, RS.rec_fund_id, RS.rec_tendertypeid, RS.rec_amount, @ReceiptNumber, RS.DateEntered, RS.EnteredByFROM tblRec_setup AS RS INNER JOIN tblPayments AS PL ON RS.rec_id = PL.rec_id Sub Post() Dim cmdInsert1 As SqlCommand Dim tr As SqlTransaction = Nothing Dim ConnectStr As String = _ ConfigurationManager.ConnectionStrings("2ConnectionString").ConnectionString Dim conn As New SqlConnection(ConnectStr) cmdInsert1 = New SqlCommand cmdInsert1.CommandType = CommandType.StoredProcedure cmdInsert1.CommandText = "BatchMonthly" 'Get a new receipt number and add it. Dim InsertedIntegerRN As New SqlParameter("@ReceiptNumber", SqlDbType.Int) InsertedIntegerRN.Direction = ParameterDirection.Output cmdInsert1.Parameters.Add(InsertedIntegerRN) Try conn.Open() tr = conn.BeginTransaction() cmdInsert1.Transaction = tr cmdInsert1.Connection = conn cmdInsert1.ExecuteScalar() tr.Commit() Catch objException As SqlException tr.Rollback() Dim ex As SqlError Response.Write(ex.Message) Finally conn.Close() End TryEnd Sub
So I thought I would add, What I'm doing here is this:
I insert a new receiptnumber into the tblNumberCounter table.
Then I use that number in the first row found based on the second Insert.
Then it needs to get another new receiptnumber for the next row of the second insert.
Anyway, I appeciate any help.

View 1 Replies View Related

Write Output To A Text File

Jan 28, 2002

how to write a query output into a text file in a c: directory
the field datatype is text .

Thanks

Al

View 2 Replies View Related

How Do I Write An Output Parameter (result) When..

Feb 24, 2006

..calling a stored procedure.SQL

I am using the C programming language... I have two input variables and one output...Not sure how to do the output

BEGIN EQUIPMENT_UTILITIES.MOVE_EQUIPMENT(EQNUM, MoveTo, ?); END;

This is in a CSTRING format....
Thanks.
Sherin

View 1 Replies View Related

Execute Process Task / Console Output

Oct 25, 2006

I'm just starting to find my way around SSIS, coming from SQL 2000 DTS, but I can't see a way of including a Win32 Console application's output into the logging process.

I've started playing around with SSIS Logs (OnTaskFailed etc..), but I can find no where to allow me to capture the output from a console app. In SQL 2000 DTS I could capture this by specifying an "output file" on the advanced tab of the job step definition. Is there something as straight forward as this in SSIS ?

I'd be grateful for a few pointers in the right direction.

View 4 Replies View Related

Synchronization With Verbose History Logging And Specify An Output File To Write....

Feb 1, 2007

i had setup the merge replication across the server but each next morning i find that replication syncronization has stop with following error

The merge process was unable to access row metadata at the 'Subscriber'. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to write to, or use SQL Profiler to determine the source of the failure. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147200996)

for this i manually restrat the syn. agent by stopping and then starting agent.

plz tell me how can i fix this hell of message or tell me how i call start/stop merge agent on command line so that i make script starting and stoping agent as job and will configure to run every morning.

regards

Ahmad Drshen

View 1 Replies View Related

Http://localhost/reportserver Returning CS0016: Could Not Write To Output File

Oct 24, 2006

Hi,

This is on a brandnew Win2003 server install with SQL Server 2005, RS 2005 and VS.NET 2005. I'm not able to log to the reportserver site to configure/publish reports. I'm logged in the system as administrator.

From IE6 I enter http://localhost/reportserver or http://localhost/reports and all I get is:
Server Error in '/ReportServer' Application.

Compilation Error

Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.

Compiler Error Message: CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver1bbf2d182968d42eApp_global.asax.konkdp27.dll' -- 'The directory name is invalid. '

Source Error:

[No relevant source lines]
Source File: Line: 0

Show Detailed Compiler Output:

c:windowssystem32inetsrv> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727csc.exe" /t:library /utf8output /R:"C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver1bbf2d182968d42eassemblydl37d9e24c30719bf6_b4d0c501ReportingServicesWebServer.DLL" /out:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver1bbf2d182968d42eApp_global.asax.konkdp27.dll" /debug- /optimize+ /w:4 /nowarn:1659;1699 "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver1bbf2d182968d42eApp_global.asax.konkdp27.0.cs" "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver1bbf2d182968d42eApp_global.asax.konkdp27.1.cs"

Microsoft (R) Visual C# 2005 Compiler version 8.00.50727.42
for Microsoft (R) Windows (R) 2005 Framework version 2.0.50727
Copyright (C) Microsoft Corporation 2001-2005. All rights reserved.

error CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver1bbf2d182968d42eApp_global.asax.konkdp27.dll' -- 'The directory name is invalid. '

Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210

I've checked all permissions every where, I even allowed everyone full control to the entire C: drive, I uninstalled and reinstalled IIS6 (aspnet_regiis.exe) and nothing worked.

Any one has a clue as to what I need to do here?

Thanks,

Pierre

View 7 Replies View Related

Number Of ROWS Of Output Of Aggregate Transformation Sometimes Doesn't Match The Output From T-SQL Query

Dec 25, 2006

While using Aggregate Transformation to group one column,the rows of output sometimes larger than the rows returned by a T-SQL statement via SSMS.

For example,the output of the Aggregate Transformation may be 960216 ,but the

'Select Count(Orderid) From ... Group By ***' T-SQL Statement returns 96018*.

I'm sure the Group By of the Aggregate Transformation is right!

But ,when I set the "keyscale" property of the transformation,the results match!

In my opinion,the "keyscale" property will jsut affects the performance of the transformaiton,but not the result of the transformation.

Thanks for your advice.

View 2 Replies View Related

Transact SQL :: Generic Store Procedure Call Without Output Parameters But Catching Output

Sep 21, 2015

Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])

EX1 : @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 : @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 : @SPToCall : [sp_GetSomeResult]

I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working

DECLARE @myFinalVarFilledWithCachedOutput
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'

[code]...

View 3 Replies View Related

Trigger Error When Inserting Stored Proc Output Into Temp Table.

Feb 18, 2008

I writing a unit test which has one stored proc calling data from another stored proc. Each time I run dbo.ut_wbTestxxxxReturns_EntityTest I get a severe uncatchable error...most common cause is a trigger error. I have checked and rechecked the columns in both of the temp tables created. Any ideas as to why the error is occurring?

--Table being called.

ALTER PROCEDURE dbo.wbGetxxxxxUserReturns

@nxxxxtyId smallint,

@sxxxxxxxxUser varchar(32),

@sxxxxName varchar(32)

AS

SET NOCOUNT ON

CREATE TABLE #Scorecard_Returns

(
NAME_COL varchar(64),
ACCT_ID int,

ACCT_NUMBER varchar(10),

ENTITY_ID smallint,

NAME varchar(100),

ID int,

NUM_ACCOUNT int,

A_OFFICER varchar(30),

I_OFFICER varchar(30),

B_CODE varchar(30),

I_OBJ varchar(03),

LAST_MONTH real,

LAST_3MONTHS real,

IS int

)

ALTER PROCEDURE dbo.ut_wbTestxxxxReturns_EntityTest

AS

SET NOCOUNT ON

CREATE TABLE #Scorecard_Returns

(
NAME_COL varchar(64),
ACCT_ID int,

ACCT_NUMBER varchar(10),

ENTITY_ID smallint,

NAME varchar(100),

ID int,

NUM_ACCOUNT int,

A_OFFICER varchar(30),

I_OFFICER varchar(30),

B_CODE varchar(30),

I_OBJ varchar(03),

LAST_MONTH real,

LAST_3MONTHS real,

IS int

)

INSERT #Scorecard_Returns(

NAME_COL ,

ACCT_ID

ACCT_NUMBER ,

ENTITY_ID,

NAME,

ID,

NUM_ACCOUNT,

A_OFFICER,

I_OFFICER,

B_CODE,

I_OBJ ,

LAST_MONTH

LAST_3MONTHS,

IS

)

EXEC ISI_WEB_DATA.dbo.wbGetxxxxxcardUserReturns

@nId = 1,

@sSUser = 'SELECTED USER',

@sUName = 'VALID USER'

View 4 Replies View Related

Execute Process Task -- Redirect Standard Output To A File, Not A Variable

May 29, 2007

I'm trying to use "findstr.exe" to extract some lines of interest from a data file, which I will later load to a table. I'd like to issue this form of a command:

findstr.exe "^SEARCHSTRING" "srcfile" > "dstfile"

I build the arguments using expressions, and both the search string and source file get correctly set. However, the ">" seems to be ignored--I can see the lines spitting out to the temporary window when I run under VS.

QUESTION: how do you redirect the output of a command run under an Execute Process Task?

View 3 Replies View Related

Using Output From A Stored Procedure As An Output Column In The OLE DB Command Transformation

Dec 8, 2006

I am working on an OLAP modeled database.

I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).

I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.

The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.

What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?

I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.

Thanks in advance for any assistance you can provide.

View 9 Replies View Related

SQL Server 2012 :: Using Unions To Write Out Each Select Query As Distinct Line In Output

Aug 20, 2015

Basically I'm running a number of selects, using unions to write out each select query as a distinct line in the output. Each line needs to be multiplied by -1 in order to create an offset balance (yes this is balance sheet related stuff) for each line. Each select will have a different piece of criteria.

Although I have it working, I'm thinking there's a much better or cleaner way to do it (I use the word better loosely)

Example:
SELECT 'Asset', 'House', TotalPrice * -1
FROM Accounts
WHERE AvgAmount > 0
UNION
SELECT 'Balance', 'Cover', TotalPrice
FROM Accounts
WHERE AvgAmount > 0

What gets messy here is having to write a similar set of queries where the amount is < 0 or = 0

I'm thinking something along the lines of building a table function contains all the descriptive text returning the relative values based on the AvgAmount I pass to it.

View 6 Replies View Related

Query Produces Jumbled Output / Output Not In Sequence

Jul 23, 2005

Hi!Server info -Win2K3 Server +SP1 with 1 GB Memory and 1.5 GB Virtual MemorySQL Server 2000 Enterprise Edition + SP3 running on this.Required result -Create a SQL Script that will contain a set of create, update, insert& delete statements (about 17500 lines including blank lines) thatcan be run on different databases seperatelyHow we do this -We have a SP - that creates a temporary table and then calls anotherSP that actually populates the temporary table created by the first SP*Samples of both SPs are below -PROBLEMThe result is directed to a file -However when the query is run it runs through the entire script but'Jumbles' the outputRunning the same scripts on a copy of the database on other machineswork fine and the size of the outfiles is exactly the sameI have increased the page size to 2.5 GB and restarted the server.Running the sp now generated the correct output a few times but gotjumbled as before after a few more users logged in and activity on theserver increased.Another interesting point is that the output is jumbled exactly thesame way each time. It seems the sql executes correctly and writesthe output in chunks only writting the chunks out of sequence - butin the same sequence each time.e.g. of expected resultInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table3Values ................Update RefGenSet Last = 1234Where RefGenRef = 1JUMBLED OUTPUTInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table2Values ...Values ...Update RefGenSet Last = 1234Where RefGenRef = 1Insert into Table3Values ................Insert into Table1Values c, d, e, 21, 12....Insert into Table2----------------------------------------Sample of First Script - STATDATA_RSLT**************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOSET NOCOUNT ONGOCREATE PROCEDURE StatData_rsltASCREATE TABLE #tbl_Script(ScriptText varchar(4000))EXEC TestStatData_intSELECT t.ScriptTextFROM #tbl_Script tGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************************Sample of CALLED SP - TestStatData_int*******************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOCREATE PROCEDURE TestStatData_intASDECLARE @AttrRef int,@TestID int,@PrtTestRef int,@AttrType tinyint,@EdtblSw tinyint,@NmValRef int,@SrtTypeRef int,@AttrStr varchar(20),@TestStr varchar(20),@PrtTestStr varchar(20),@AttrTypeStr varchar(20),@EdtblStr varchar(20),@NmValStr varchar(20),@SrtTypeStr varchar(20),@TestRef int,@Seq int,@PrtRef int,@Value varchar(255),@TermDate datetime,@AttrID int,@DefSw tinyint,@WantSw tinyint,@TestRefStr varchar(20),@SeqStr varchar(20),@PrtStr varchar(20),@TermDateStr varchar(255),@AttrIDStr varchar(20),@DefStr varchar(20),@WantStr varchar(20),@LanRef int,@LanStr varchar(20),@Code varchar(20),@Desc varchar(255),@MultiCode varchar(20),@MultiDesc varchar(255),@InhSw tinyint,@InhStr varchar(20),@InhFrom int,@InhFromStr varchar(20),@Lan_TestRef int,@ActSw tinyint,@ActSwStr varchar(20)SELECT @Lan_TestRef = dbo.fn_GetTestRef('Lan')INSERT INTO #tbl_ScriptVALUES('')-- Create tablesINSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_Test (AttrRef int, TestID int , PrtTestRefint, AttrType tinyint, EdtblSw tinyint, NmValRef int, SrtTypeRefint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES('CREATE TABLE #tbl_TestAttr(AttrRef int, TestRef int, Seq int,PrtRef int, AttrType tinyint, Value varchar(255), TermDate datetime,AttrID int, DefSw tinyint, WantSw tinyint, ActSw tinyint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_AttrName(AttrRef int, LanRef int, Codevarchar(20), [Desc] varchar(255), MultiCode varchar(20), MultiDescvarchar(255), InhSw tinyint, InhFrom int)')INSERT INTO #tbl_ScriptVALUES ('')-- insert Test valuesDECLARE Test_cursor CURSOR FORSELECT l.AttrRef, l.TestID, l.PrtTestRef, l.AttrType, l.EdtblSw,l.NmValRef, l.SrtTypeRefFROM Test lOPEN Test_cursorFETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestStr = ISNULL(CAST(@TestID as varchar), 'NULL'),@PrtTestStr = ISNULL(CAST(@PrtTestRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@EdtblStr = ISNULL(CAST(@EdtblSw as varchar), 'NULL'),@NmValStr = ISNULL(CAST(@NmValRef as varchar), 'NULL'),@SrtTypeStr = ISNULL(CAST(@SrtTypeRef as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_Test(AttrRef, TestID, PrtTestRef,AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('VALUES ( ' + @AttrStr + ', ' + @TestStr + ', ' +@PrtTestStr+ ', ' + @AttrTypeStr + ', ' + @EdtblStr + ', ' + @NmValStr + ', ' +@SrtTypeStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefENDCLOSE Test_cursorDEALLOCATE Test_cursorDECLARE TestAttr_cursor CURSOR FORSELECT le.AttrRef, le.TestRef, le.Seq, le.PrtRef, le.AttrType,le.Value,le.TermDate, le.AttrID, le.DefSw, le.WantSw, le.ActSwFROM TestAttr leWHERE le.WantSw = 1AND le.ActSw = 1OPEN TestAttr_cursorFETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestRefStr = ISNULL(CAST(@TestRef as varchar), 'NULL'),@SeqStr = ISNULL(CAST(@Seq as varchar), 'NULL'),@PrtStr = ISNULL(CAST(@PrtRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@Value = ISNULL(@Value, 'NULL'),@TermDateStr = ISNULL(CAST(@TermDate as varchar), 'NULL'),@AttrIDStr = ISNULL(CAST(@AttrID as varchar), 'NULL'),@DefStr = ISNULL(CAST(@DefSw as varchar), 'NULL'),@WantStr = ISNULL(CAST(@WantSw as varchar), 'NULL'),@ActSwStr = ISNULL(CAST(@ActSw as varchar), '1')SELECT @Value = '''' + @Value + ''''WHERE @Value <> 'NULL'INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_TestAttr(AttrRef, TestRef, Seq, PrtRef,AttrType, Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @TestRefStr + ', ' +@SeqStr+ ', ' + @PrtStr + ', ' + @AttrTypeStr + ', ' + @Value + ', ' +@TermDateStr + ', ' + @AttrIDStr + ', ' + @DefStr + ', ' + @WantStr+', '+ @ActSwStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwENDCLOSE TestAttr_cursorDEALLOCATE TestAttr_cursorDECLARE AttrName_cursor CURSOR FORSELECT e.AttrRef, e.LanRef, e.Code, e.[Desc], e.MultiCode,e.MultiDesc, e.InhSw, e.InhFromFROM AttrName e, TestAttr leWHERE e.LanRef = 0AND e.AttrRef = le.AttrRefAND le.WantSw = 1AND le.ActSw = 1OPEN AttrName_cursorFETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@LanStr = ISNULL(CAST(@LanRef as varchar), 'NULL'),@Code = ISNULL(@Code, 'NULL'),@Desc = ISNULL(@Desc, 'NULL'),@MultiCode = ISNULL(@MultiCode, 'NULL'),@MultiDesc = ISNULL(@MultiDesc, 'NULL'),@InhStr = ISNULL(CAST(@InhSw as varchar), 'NULL'),@InhFromStr = ISNULL(CAST(@InhFrom as varchar), 'NULL')SELECT @Code = REPLACE(@Code, '''',''''''),@Desc = REPLACE(@Desc, '''','''''') ,@MultiCode = REPLACE(@MultiCode, '''','''''') ,@MultiDesc = REPLACE(@MultiDesc, '''','''''')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_AttrName(AttrRef, LanRef, Code, [Desc],MultiCode, MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @LanStr + ', ''' + @Code +''', ''' + @Desc + ''', ''' + @MultiCode + ''', ''' + @MultiDesc +''',' + @InhStr + ', ' + @InhFromStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromENDCLOSE AttrName_cursorDEALLOCATE AttrName_cursor-- Do update TestAttr dataINSERT INTO #tbl_ScriptVALUES ('UPDATE le')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' le.TestRef = t.TestRef,')INSERT INTO #tbl_ScriptVALUES (' le.PrtRef = t.PrtRef,')INSERT INTO #tbl_ScriptVALUES (' le.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' le.Value = t.Value,')INSERT INTO #tbl_ScriptVALUES (' le.TermDate = t.TermDate,')INSERT INTO #tbl_ScriptVALUES (' le.AttrID = t.AttrID,')INSERT INTO #tbl_ScriptVALUES (' le.DefSw = t.DefSw,')INSERT INTO #tbl_ScriptVALUES (' le.WantSw = t.WantSw,')INSERT INTO #tbl_ScriptVALUES (' le.ActSw = t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM TestAttr le, #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('WHERE le.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Update AttrNameINSERT INTO #tbl_ScriptVALUES ('UPDATE en')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' en.Code = te.Code,')INSERT INTO #tbl_ScriptVALUES (' en.[Desc] = te.[Desc],')INSERT INTO #tbl_ScriptVALUES (' en.MultiCode = te.MultiCode,')INSERT INTO #tbl_ScriptVALUES (' en.MultiDesc = te.MultiDesc,')INSERT INTO #tbl_ScriptVALUES (' en.InhSw = te.InhSw,')INSERT INTO #tbl_ScriptVALUES (' en.InhFrom = te.InhFrom')INSERT INTO #tbl_ScriptVALUES ('FROM AttrName en, #tbl_AttrName te')INSERT INTO #tbl_ScriptVALUES ('WHERE en.AttrRef = te.AttrRef')INSERT INTO #tbl_ScriptVALUES (' AND en.LanRef = te.LanRef')INSERT INTO #tbl_ScriptVALUES (' AND te.LanRef = 0')-- Do update Test the dataINSERT INTO #tbl_ScriptVALUES ('UPDATE l')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' l.TestID = t.TestID,')INSERT INTO #tbl_ScriptVALUES (' l.PrtTestRef = t.PrtTestRef,')INSERT INTO #tbl_ScriptVALUES (' l.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' l.EdtblSw = t.EdtblSw,')INSERT INTO #tbl_ScriptVALUES (' l.NmValRef = t.NmValRef')INSERT INTO #tbl_ScriptVALUES ('FROM Test l, #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('WHERE l.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')--DELETE where just updatedINSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t, Test l')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = l.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM te')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE te.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Insert TestAttrINSERT INTO #tbl_ScriptVALUES ('INSERT INTO TestAttr (AttrRef, TestRef, Seq, PrtRef,AttrType,Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestRef, t.Seq, t.PrtRef, t.AttrType,t.Value, t.TermDate, t.AttrID, t.DefSw, t.WantSw, t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('')-- AttrNameINSERT INTO #tbl_ScriptVALUES ('INSERT INTO AttrName(AttrRef, LanRef, Code, [Desc],MultiCode,MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('SELECT te.AttrRef, le.AttrRef, te.Code, te.[Desc],te.MultiCode, te.MultiDesc, ')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN 0')INSERT INTO #tbl_ScriptVALUES (' ELSE 1 END,')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN NULL')INSERT INTO #tbl_ScriptVALUES (' ELSE 0 END')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE le.TestRef = ' + CAST(@Lan_TestRef as varchar))INSERT INTO #tbl_ScriptVALUES ('')-- Insert new rowsINSERT INTO #tbl_ScriptVALUES ('INSERT INTO Test(AttrRef, TestID, PrtTestRef, AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestID, t.PrtTestRef, t.AttrType,t.EdtblSw, t.NmValRef, t.SrtTypeRef')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_Test')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_TestAttr')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_AttrName')-- Update RefGenDECLARE @RefGenReflast int,@RefGenRefStr varchar(10)SELECT @RefGenReflast = lastFROM RefGenWHERE RefGenRef = 1SELECT @RefGenRefStr = ISNULL(CAST(@RefGenReflast as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES('')INSERT INTO #tbl_ScriptVALUES('UPDATE RefGen')INSERT INTO #tbl_ScriptVALUES ('SET Last = ' + @RefGenRefStr)INSERT INTO #tbl_ScriptVALUES ('WHERE RefGenRef = 1')INSERT INTO #tbl_ScriptVALUES ('')GOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************RegardsGlenn

View 5 Replies View Related

PrimeOutput : Difference Between 'Output' And 'output Buffer'

Aug 12, 2005

When overriding the PrimeOutput method in a custom component, you get as parameters the outputIDs and the output buffers (of type PipelineBuffer). using the outputIDs you can get IDTSOutput90 outputs.

View 5 Replies View Related

Problem With The Output Of Time Series Model

Jul 15, 2006

Hi,
I have built a Time Series model to forecast Sales Value. I have used data form Jan 2005 to Sep2006 to train the model.
When
I write a DMX query to forecast the sales value for next 5 months, it is throwing me the output in the following format.

$TIME Sales Value
200610 2874
200611 2875
200612 2874
200613 2874
200614 2874

whereas the output i expected was.

$TIME Sales Value
200610 2874

200611 2875

200612 2874

200701 2874

200702 2874

What changes should i make in the model to get the output in the above format.?

View 4 Replies View Related

Table Output

Jul 4, 2006

Hi everyone,
While creating a stored prodecure, I now that it is possible to use an output parameter which is a table. However, I do not know how to do it ??
In other words, I would like to return a table but as an output parameter, so how can this happen ?

View 5 Replies View Related

Flat File Source Error Output Conversion Error With UNICODE Files

May 14, 2008

i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.

simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".

i hope you can help me with issue.

Thanks in advance.

View 5 Replies View Related

Using Sql To Output Xml - Generating Error

Jul 19, 2006

Hi guys i'm a newbie to this forums so hopefully i've posted in the right place, so here goes .....

My company has been given a CMS to look at, thing is everything seems to be working except for this beasty stored procedure.. the purpose of this stored procedure is to gather data and output it as xml, but for some reason and i havent a clue why - i am getting an error stated below - i have also attahced the stored procedured in hopes of some kind gurus can help me

Appreciate any and all help guys
andy

ERRROR MESSAGE:
Microsoft OLE DB Provider for SQL Server error '80040e21'
Parent tag ID 1 is not among the open tags. FOR XML EXPLICIT requires parent tags to be opened first. Check the ordering of the result set.

View 2 Replies View Related

Get Name Of Column In Error Output

Apr 23, 2007

I would like to get the actual name of the column that has the error. Using the ErrorColumn (int value) I thought there would be some type of lookup collection based on the input (like column names)- if there is, can someone tell me how to get to it?

I have my error output writing to a stored proc, but instead of "32226" as the column name, I need to have the actual name of the column. I am going from Flat File to OLE DB Destination. I have a Script Component getting the output to write to my sproc, and I just need to get the column name.

Suggestions?? Thanks

View 19 Replies View Related

OLE DB Source Error Output

Nov 8, 2007

What is the purpose of the error output for an OLE DB Source component. Any sql that would cause an error such as converting a character to a number or division by zero causes the OLE DB Source component to fail regardless of the settings for the error output. Works perfect for OLE DB Destination but I cannot come up with any scenario where it would work for the OLE DB Source component.

Thanks in advance,
Brad

View 10 Replies View Related

Customized Error Output?

Jun 25, 2007

I am using SSIS to load a lot of Excel, csv files. Some of the files will fail for various formating/validation reason. Is it a good way to capture the error and generate a nice error report so the provider can read it easily and correct the data files?

The error log of the package is difficult to read.

View 1 Replies View Related

OLE DB Source Error Output

Aug 3, 2007

In the Input and Output Properties tab under Advance Editor for OLE DB Source, I cannot remove columns. I copied this Source from a standard template and have made the normal changes to make it work. However I keep getting this error...Error: 0xC020837B at Load Server Security, OLE DB Source [1]: The output column "DBName" (1632) on the error output has no corresponding output column on the non-error output.Error: 0xC004706B at Load Server Security, DTS.Pipeline: "component "OLE DB Source" (1)" failed validation and returned validation status "VS_ISBROKEN".DBName of course is one of the columns that no longer exist, but I can't remove. Whenever I try to remove one of the columns, I get this error...Error at Load Server Security [OLE DB Source[1]]: The column cannot be deleted. The component does not allow columns to be deleted from this input or output. Is there anything that I can do to remove the columns? Is there just a simple setting that I can change to make this work?

View 6 Replies View Related

Error Output Question

May 17, 2007

Hello,

I realize I have a question about what constitutes an "error" for an error output.

For example, a flat file source has an error output for "bad rows", that is, when it encounters "unexpected data". What specifically is "unexpected data"? Is this documented somewhere?

Another example would be an OLE DB source that uses a query to retrieve row. This too, has an error output, but I realize I have no clue what would constitute bad data from a table. I mean, data in a table is just data, so what would constitute an error from an OLE DB source? I can't think of one thing. Where are these "rules" documented, if anywhere?

Thanks

View 1 Replies View Related

Error Output Logic

Apr 10, 2007

Hello,

I have a simple SSIS package running under SQL 2005 SP2a.

In the data flow, I have several lookup transforms with error outputs. Each error output links to its own audit transform and then writes data to its own flat file destination.

After the data flow is complete, my control flow will then use a ForEach file container to mail the flat files to the source system data owners with a message about incomplete/inconsistent source data. I am effectively providing feedback to the source owners so that we may improve the quality of data that gets sent to us.

My problem is that the flat file (which contains the offending rows) seems to get created everytime even when there were no errors in the lookup in question. Thus my ForEach container will always send a mail to the data source teams even if there were no errors as the error flat file will always exist albeit empty.

How can I stop this happening? How can I only create flat files when there really were errors? How can I prevent the source teams from receiving feedback emails when there is no reason to?

Thanks in advance
MGale1

View 1 Replies View Related

Insert Output Of SP Into Table

Aug 20, 2007

Hi gurus

Please help me to get out the problem ... i wanna store the output of SP_MONITOR into a table. Please let me know how can i do this

Thanks & Regards
Chander

View 7 Replies View Related

OUTPUT On Table With A Trigger

Sep 7, 2006

First some background info.
SQL Express
Visual Studio 2005

VB.Net

Data.SQLClient Namespace

Well I was using the OUTPUT option in my program and it was great, i was returning my PrimaryKey from the newly inserted row. (I am using paramaters in my program and running a sqlCommand.ExecuteScalar)

--Example Insert
"Insert into tblInfo (fldInfo,fldDate) OUTPUT inserted.fldInfoID values (@fldInfo, @fldDate)"

Then I found a problem...:(

I added trigger to the tblInfo, that after a Insert,Update, Delete it would perform a audit on the table saving the old info that was overritten, type of action taken (insert, update or delete), and who did it.

Well my OUTPUT didn't like that says, it can't do a OUTPUT on a table with a trigger.

--Error msg
Msg 334, Level 16, State 1, Line 1
The target table 'tblInfo' of the DML statement cannot have any enabled triggers if the statement contains an OUTPUT clause without INTO clause.

So what am i supose to do? I want the audit to occur, but I walso want the primarykey without doing a select (maxID) which could potentially get the wrong id (multiuser).

Any suggestions?

Thanks,
Jordon

View 3 Replies View Related

How To Output Data To A New Table

Jul 10, 2006

Hi

I run a SQL query to select a few colums of data using a select statement, I want the output to be stored in the new table which can be defined in the SQL statement how can I do it?

Your helpwill bw highly appreciated.

View 5 Replies View Related

Output Table As Variable

May 14, 2007

Hi,

I've been looking into using the ability to select the table of an OLEDB destination task based on a package variable but would like to know if this could be utilised in the following example.

I have a CSV file (potentially there are many) with a number of rows. The rows do not necessarily contain the same number of elements. Each row has an EventID and this is used to determine the database table that the row is to be inserted in.

Initially i thought about using a conditional split to send each row down the path relating to its event ID. There would be multiple destinations depending on the table. With the possibility of 60 to 70 different event ID's this is very quickly going to get out of hand in the designer. I'd like to know if it would be possible to set up a case statement (or similar) in a script component and specify the table name as a variable depending on the event ID. I'd then use this table variable to set the destination task's table property.

Does this sound like a possibility or do i have to go down the route of multiple paths?

Many thanks in advance,

Grant

View 3 Replies View Related

What Error #s To Look For In Dbcc Checkdb Output

Jan 29, 2001

I want to automate the dbcc checkdb process. I create a temp table called #CheckDbTbl and run the following command:

INSERT INTO #CheckDBTbl
dbcc checkdb(MyDbName) with tableresults

I plan to send myself an email if any problems are found.

Does anyone know what Error numbers or Levels or anything else I should look for in the #CheckDBTbl that will tell me a problem exists? Right now I'm only checking for: Level >= 16.

Many thanks for your responses!

-bh

View 1 Replies View Related