Hi,
Suppose there are two tables employee and salary and a,b are two instances of tables employee and salary.There are 20 records in each table.Then what will be the result of the following query
select a.*, b.* from employee a, salary b.
regards
arun
Hi all,
I copied the following code from Microsoft SQL Server 2005 Online (September 2007):
UDF_table.sql:
USE AdventureWorks;
GO
IF OBJECT_ID(N'dbo.ufnGetContactInformation', N'TF') IS NOT NULL
DROP FUNCTION dbo.ufnGetContactInformation;
GO
CREATE FUNCTION dbo.ufnGetContactInformation(@ContactID int)
RETURNS @retContactInformation TABLE
(
-- Columns returned by the function
ContactID int PRIMARY KEY NOT NULL,
FirstName nvarchar(50) NULL,
LastName nvarchar(50) NULL,
JobTitle nvarchar(50) NULL,
ContactType nvarchar(50) NULL
)
AS
-- Returns the first name, last name, job title, and contact type for the specified contact.
BEGIN
DECLARE
@FirstName nvarchar(50),
@LastName nvarchar(50),
@JobTitle nvarchar(50),
@ContactType nvarchar(50);
-- Get common contact information
SELECT
@ContactID = ContactID,
@FirstName = FirstName,
@LastName = LastName
FROM Person.Contact
WHERE ContactID = @ContactID;
SELECT @JobTitle =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN (SELECT Title
FROM HumanResources.Employee
WHERE ContactID = @ContactID)
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE ContactID = @ContactID)
ELSE NULL
END;
SET @ContactType =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN 'Employee'
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN 'Vendor Contact'
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN 'Store Contact'
-- Check for individual consumer
WHEN EXISTS(SELECT * FROM Sales.Individual i
WHERE i.ContactID = @ContactID)
THEN 'Consumer'
END;
-- Return the information to the caller
IF @ContactID IS NOT NULL
BEGIN
INSERT @retContactInformation
SELECT @ContactID, @FirstName, @LastName, @JobTitle, @ContactType;
END;
RETURN;
END;
GO
----------------------------------------------------------------------
I executed it in my SQL Server Management Studio Express and I got: Commands completed successfully. I do not know where the result is and how to get the result viewed. Please help and advise.
Thanks in advance,
Scott Chang
I'm building a simple webform, except Visual Studio and my service provider have combined to drive me nutty.
First, I MUST use an ODBC connection to my remote SQL Server do to some unknown configuartion problem. I've been playing with Visual Studio for only a month, so normally when something goes wrong I can go look in the mirror and find the culprit. This is different. I've got a totally functional web form with a SQL Connection, but when I try to change it to an ODBC Connection, I get the following error.
An OdbcParameter with ParameterName '@CertHolder' is not contained by this OdbcParameterCollection
My coding is fine because I stole it straight from the walkthrough and it works. But the specifications that Visual Studio provide are quite suspect. Please note the failure to include some key "@" signs.
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection
Me.cmdUpdate = New System.Data.SqlClient.SqlCommand
Me.cmdGetAll = New System.Data.SqlClient.SqlCommand
Me.cmdSelect = New System.Data.SqlClient.SqlCommand
Me.OdbcConnection1 = New System.Data.Odbc.OdbcConnection
Me.OdbcGetAll = New System.Data.Odbc.OdbcCommand
Me.OdbcSelect = New System.Data.Odbc.OdbcCommand
Me.OdbcUpdate = New System.Data.Odbc.OdbcCommand
'
'SqlConnection1
'
Me.SqlConnection1.ConnectionString = "this works fine"
'
'cmdUpdate
'
Me.cmdUpdate.CommandText = "UPDATE InsuranceData SET Name = @Name, Address = @Address, Address2 = @Address2, " & _
"City = @City, State = @State, Zip = @Zip, CertHolder = WHERE (CertHolder = @Cert" & _
"Holder)"
Me.cmdUpdate.Connection = Me.SqlConnection1
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Name", System.Data.SqlDbType.NVarChar, 50, "Name"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Address", System.Data.SqlDbType.NVarChar, 50, "Address"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Address2", System.Data.SqlDbType.NVarChar, 50, "Address2"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@City", System.Data.SqlDbType.NVarChar, 50, "City"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@State", System.Data.SqlDbType.NVarChar, 50, "State"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Zip", System.Data.SqlDbType.NVarChar, 50, "Zip"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@CertHolder", System.Data.SqlDbType.NVarChar, 50, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "CertHolder", System.Data.DataRowVersion.Original, Nothing))
'
'cmdGetAll
'
Me.cmdGetAll.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData"
Me.cmdGetAll.Connection = Me.SqlConnection1
'
'cmdSelect
'
Me.cmdSelect.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData W" & _
"HERE (CertHolder = @CertHolder)"
Me.cmdSelect.Connection = Me.SqlConnection1
Me.cmdSelect.Parameters.Add(New System.Data.SqlClient.SqlParameter("@CertHolder", System.Data.SqlDbType.NVarChar, 50, "CertHolder"))
'
'OdbcConnection1
'
Me.OdbcConnection1.ConnectionString = "This works fine"
'
'OdbcGetAll
'
Me.OdbcGetAll.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData"
Me.OdbcGetAll.Connection = Me.OdbcConnection1
'
'OdbcSelect
'
Me.OdbcSelect.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData W" & _
"HERE CertHolder = @CertHolder"
Me.OdbcSelect.Connection = Me.OdbcConnection1
Me.OdbcSelect.Parameters.Add(New System.Data.Odbc.OdbcParameter("CertHolder", System.Data.Odbc.OdbcType.NVarChar, 50, "CertHolder"))
'
'OdbcUpdate
'
Me.OdbcUpdate.CommandText = "UPDATE InsuranceData SET Name = @Name, Address = @Address, Address2 = @Address2, " & _
"City = @City, State = @State, Zip = @Zip WHERE CertHolder = @CertHolder"
Me.OdbcUpdate.Connection = Me.OdbcConnection1
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Name", System.Data.Odbc.OdbcType.NVarChar, 50, "Name"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Address", System.Data.Odbc.OdbcType.NVarChar, 50, "Address"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Address2", System.Data.Odbc.OdbcType.NVarChar, 50, "Address2"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("City", System.Data.Odbc.OdbcType.NVarChar, 50, "City"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("State", System.Data.Odbc.OdbcType.NVarChar, 50, "State"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Zip", System.Data.Odbc.OdbcType.NVarChar, 50, "Zip"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Original_CertHolder", System.Data.Odbc.OdbcType.NVarChar, 50, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "CertHolder", System.Data.DataRowVersion.Original, Nothing))
I NEVER EVER TYPED ORIGINAL_CERTHOLDER IN THE SQL PREPARATION
End Sub
Protected WithEvents btnSave As System.Web.UI.WebControls.Button
Protected WithEvents SqlConnection1 As System.Data.SqlClient.SqlConnection
Protected WithEvents ddlCertHolder As System.Web.UI.WebControls.DropDownList
Protected WithEvents txtName As System.Web.UI.WebControls.TextBox
Protected WithEvents txtAddress As System.Web.UI.WebControls.TextBox
Protected WithEvents ddlCH As System.Web.UI.WebControls.DropDownList
Protected WithEvents cmdUpdate As System.Data.SqlClient.SqlCommand
Protected WithEvents cmdGetAll As System.Data.SqlClient.SqlCommand
Protected WithEvents cmdSelect As System.Data.SqlClient.SqlCommand
Protected WithEvents txtAddress2 As System.Web.UI.WebControls.TextBox
Protected WithEvents txtCity As System.Web.UI.WebControls.TextBox
Protected WithEvents txtState As System.Web.UI.WebControls.TextBox
Protected WithEvents txtZip As System.Web.UI.WebControls.TextBox
Protected WithEvents OdbcConnection1 As System.Data.Odbc.OdbcConnection
Protected WithEvents OdbcGetAll As System.Data.Odbc.OdbcCommand
Protected WithEvents OdbcSelect As System.Data.Odbc.OdbcCommand
Protected WithEvents OdbcUpdate As System.Data.Odbc.OdbcCommand
'NOTE: The following placeholder declaration is required by the Web Form Designer.
'Do not delete or move it.
Private designerPlaceholderDeclaration As System.Object
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Comments? Suggestions, I am not positive about how to fix this.
While using Aggregate Transformation to group one column,the rows of output sometimes larger than the rows returned by a T-SQL statement via SSMS.
For example,the output of the Aggregate Transformation may be 960216 ,but the
'Select Count(Orderid) From ... Group By ***' T-SQL Statement returns 96018*.
I'm sure the Group By of the Aggregate Transformation is right!
But ,when I set the "keyscale" property of the transformation,the results match!
In my opinion,the "keyscale" property will jsut affects the performance of the transformaiton,but not the result of the transformation.
Thanks for your advice.
Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])
EX1 : @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 : @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 : @SPToCall : [sp_GetSomeResult]
I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working
DECLARE @myFinalVarFilledWithCachedOutput
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'
[code]...
Hi
I have Lookup task to determine if source data should be updated to or insert to the customer table. After Lookup task, the Error Output pipeline will redirect to insert new data to the table and the Output pipeline will update customer table. But these two tasks will be processing at the same time which causes stall on the process. Never end.....
The job is similiart to what Slow Changing Dimention does but it won't update the table at the same time.
What can I do to avoid such situation?
Thanks in advance,
JD
I am working on an OLAP modeled database.
I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).
I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.
The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.
What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?
I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.
Thanks in advance for any assistance you can provide.
Hi All,
I have these two commands that I execute at the end of my stored procedure. I get an email every time I execute this stored procedure whether the select statement returns a value or not. But I only want to get an email if select statement returns an Error value. How can I accomplish this?
set @cmd = 'osql -S server -U user -P psswd -q "set nocount on; select distinct(rtrim(col1)) from ##table where datediff(dd,col2,getdate()) = 1 and (col1 like ''%Error: %'')" -h-1 -w 1025 -o J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @cmd, no_output
SET @email = 'mailsend -f someone@mymail.com -d -smtp -t someone@mymail.com -sub "Error Log Errors" -m J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @email, no_output
Thanks.
Hi All,
I have these two commands that I execute at the end of my stored procedure. I get an email every time I execute this stored procedure whether the select statement returns a value or not. But I only want to get an email if select statement returns an Error value. How can I accomplish this?
set @cmd = 'osql -S server -U user -P psswd -q "set nocount on; select distinct(rtrim(col1)) from ##table where datediff(dd,col2,getdate()) = 1 and (col1 like ''%Error: %'')" -h-1 -w 1025 -o J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @cmd, no_output
SET @email = 'mailsend -f someone@mymail.com -d -smtp -t someone@mymail.com -sub "Error Log Errors" -m J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @email, no_output
Thanks.
How can I get all SQL commands in SqlServer? How can I trace this commands?
Thansk
Hello,
I finally got access to Northwind/pubs.
I would like to know when and why do we use the following set commands. The SQL Server BOL does not say why and when to use these commands.
Thanks in advance!!!
sqlnovice123
Option Default Setting
Set nocount OFF
Set rowcount 0
Set ansi_nulls ON
Set quoted_identifier ON
Hi!Server info -Win2K3 Server +SP1 with 1 GB Memory and 1.5 GB Virtual MemorySQL Server 2000 Enterprise Edition + SP3 running on this.Required result -Create a SQL Script that will contain a set of create, update, insert& delete statements (about 17500 lines including blank lines) thatcan be run on different databases seperatelyHow we do this -We have a SP - that creates a temporary table and then calls anotherSP that actually populates the temporary table created by the first SP*Samples of both SPs are below -PROBLEMThe result is directed to a file -However when the query is run it runs through the entire script but'Jumbles' the outputRunning the same scripts on a copy of the database on other machineswork fine and the size of the outfiles is exactly the sameI have increased the page size to 2.5 GB and restarted the server.Running the sp now generated the correct output a few times but gotjumbled as before after a few more users logged in and activity on theserver increased.Another interesting point is that the output is jumbled exactly thesame way each time. It seems the sql executes correctly and writesthe output in chunks only writting the chunks out of sequence - butin the same sequence each time.e.g. of expected resultInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table3Values ................Update RefGenSet Last = 1234Where RefGenRef = 1JUMBLED OUTPUTInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table2Values ...Values ...Update RefGenSet Last = 1234Where RefGenRef = 1Insert into Table3Values ................Insert into Table1Values c, d, e, 21, 12....Insert into Table2----------------------------------------Sample of First Script - STATDATA_RSLT**************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOSET NOCOUNT ONGOCREATE PROCEDURE StatData_rsltASCREATE TABLE #tbl_Script(ScriptText varchar(4000))EXEC TestStatData_intSELECT t.ScriptTextFROM #tbl_Script tGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************************Sample of CALLED SP - TestStatData_int*******************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOCREATE PROCEDURE TestStatData_intASDECLARE @AttrRef int,@TestID int,@PrtTestRef int,@AttrType tinyint,@EdtblSw tinyint,@NmValRef int,@SrtTypeRef int,@AttrStr varchar(20),@TestStr varchar(20),@PrtTestStr varchar(20),@AttrTypeStr varchar(20),@EdtblStr varchar(20),@NmValStr varchar(20),@SrtTypeStr varchar(20),@TestRef int,@Seq int,@PrtRef int,@Value varchar(255),@TermDate datetime,@AttrID int,@DefSw tinyint,@WantSw tinyint,@TestRefStr varchar(20),@SeqStr varchar(20),@PrtStr varchar(20),@TermDateStr varchar(255),@AttrIDStr varchar(20),@DefStr varchar(20),@WantStr varchar(20),@LanRef int,@LanStr varchar(20),@Code varchar(20),@Desc varchar(255),@MultiCode varchar(20),@MultiDesc varchar(255),@InhSw tinyint,@InhStr varchar(20),@InhFrom int,@InhFromStr varchar(20),@Lan_TestRef int,@ActSw tinyint,@ActSwStr varchar(20)SELECT @Lan_TestRef = dbo.fn_GetTestRef('Lan')INSERT INTO #tbl_ScriptVALUES('')-- Create tablesINSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_Test (AttrRef int, TestID int , PrtTestRefint, AttrType tinyint, EdtblSw tinyint, NmValRef int, SrtTypeRefint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES('CREATE TABLE #tbl_TestAttr(AttrRef int, TestRef int, Seq int,PrtRef int, AttrType tinyint, Value varchar(255), TermDate datetime,AttrID int, DefSw tinyint, WantSw tinyint, ActSw tinyint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_AttrName(AttrRef int, LanRef int, Codevarchar(20), [Desc] varchar(255), MultiCode varchar(20), MultiDescvarchar(255), InhSw tinyint, InhFrom int)')INSERT INTO #tbl_ScriptVALUES ('')-- insert Test valuesDECLARE Test_cursor CURSOR FORSELECT l.AttrRef, l.TestID, l.PrtTestRef, l.AttrType, l.EdtblSw,l.NmValRef, l.SrtTypeRefFROM Test lOPEN Test_cursorFETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestStr = ISNULL(CAST(@TestID as varchar), 'NULL'),@PrtTestStr = ISNULL(CAST(@PrtTestRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@EdtblStr = ISNULL(CAST(@EdtblSw as varchar), 'NULL'),@NmValStr = ISNULL(CAST(@NmValRef as varchar), 'NULL'),@SrtTypeStr = ISNULL(CAST(@SrtTypeRef as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_Test(AttrRef, TestID, PrtTestRef,AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('VALUES ( ' + @AttrStr + ', ' + @TestStr + ', ' +@PrtTestStr+ ', ' + @AttrTypeStr + ', ' + @EdtblStr + ', ' + @NmValStr + ', ' +@SrtTypeStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefENDCLOSE Test_cursorDEALLOCATE Test_cursorDECLARE TestAttr_cursor CURSOR FORSELECT le.AttrRef, le.TestRef, le.Seq, le.PrtRef, le.AttrType,le.Value,le.TermDate, le.AttrID, le.DefSw, le.WantSw, le.ActSwFROM TestAttr leWHERE le.WantSw = 1AND le.ActSw = 1OPEN TestAttr_cursorFETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestRefStr = ISNULL(CAST(@TestRef as varchar), 'NULL'),@SeqStr = ISNULL(CAST(@Seq as varchar), 'NULL'),@PrtStr = ISNULL(CAST(@PrtRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@Value = ISNULL(@Value, 'NULL'),@TermDateStr = ISNULL(CAST(@TermDate as varchar), 'NULL'),@AttrIDStr = ISNULL(CAST(@AttrID as varchar), 'NULL'),@DefStr = ISNULL(CAST(@DefSw as varchar), 'NULL'),@WantStr = ISNULL(CAST(@WantSw as varchar), 'NULL'),@ActSwStr = ISNULL(CAST(@ActSw as varchar), '1')SELECT @Value = '''' + @Value + ''''WHERE @Value <> 'NULL'INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_TestAttr(AttrRef, TestRef, Seq, PrtRef,AttrType, Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @TestRefStr + ', ' +@SeqStr+ ', ' + @PrtStr + ', ' + @AttrTypeStr + ', ' + @Value + ', ' +@TermDateStr + ', ' + @AttrIDStr + ', ' + @DefStr + ', ' + @WantStr+', '+ @ActSwStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwENDCLOSE TestAttr_cursorDEALLOCATE TestAttr_cursorDECLARE AttrName_cursor CURSOR FORSELECT e.AttrRef, e.LanRef, e.Code, e.[Desc], e.MultiCode,e.MultiDesc, e.InhSw, e.InhFromFROM AttrName e, TestAttr leWHERE e.LanRef = 0AND e.AttrRef = le.AttrRefAND le.WantSw = 1AND le.ActSw = 1OPEN AttrName_cursorFETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@LanStr = ISNULL(CAST(@LanRef as varchar), 'NULL'),@Code = ISNULL(@Code, 'NULL'),@Desc = ISNULL(@Desc, 'NULL'),@MultiCode = ISNULL(@MultiCode, 'NULL'),@MultiDesc = ISNULL(@MultiDesc, 'NULL'),@InhStr = ISNULL(CAST(@InhSw as varchar), 'NULL'),@InhFromStr = ISNULL(CAST(@InhFrom as varchar), 'NULL')SELECT @Code = REPLACE(@Code, '''',''''''),@Desc = REPLACE(@Desc, '''','''''') ,@MultiCode = REPLACE(@MultiCode, '''','''''') ,@MultiDesc = REPLACE(@MultiDesc, '''','''''')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_AttrName(AttrRef, LanRef, Code, [Desc],MultiCode, MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @LanStr + ', ''' + @Code +''', ''' + @Desc + ''', ''' + @MultiCode + ''', ''' + @MultiDesc +''',' + @InhStr + ', ' + @InhFromStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromENDCLOSE AttrName_cursorDEALLOCATE AttrName_cursor-- Do update TestAttr dataINSERT INTO #tbl_ScriptVALUES ('UPDATE le')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' le.TestRef = t.TestRef,')INSERT INTO #tbl_ScriptVALUES (' le.PrtRef = t.PrtRef,')INSERT INTO #tbl_ScriptVALUES (' le.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' le.Value = t.Value,')INSERT INTO #tbl_ScriptVALUES (' le.TermDate = t.TermDate,')INSERT INTO #tbl_ScriptVALUES (' le.AttrID = t.AttrID,')INSERT INTO #tbl_ScriptVALUES (' le.DefSw = t.DefSw,')INSERT INTO #tbl_ScriptVALUES (' le.WantSw = t.WantSw,')INSERT INTO #tbl_ScriptVALUES (' le.ActSw = t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM TestAttr le, #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('WHERE le.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Update AttrNameINSERT INTO #tbl_ScriptVALUES ('UPDATE en')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' en.Code = te.Code,')INSERT INTO #tbl_ScriptVALUES (' en.[Desc] = te.[Desc],')INSERT INTO #tbl_ScriptVALUES (' en.MultiCode = te.MultiCode,')INSERT INTO #tbl_ScriptVALUES (' en.MultiDesc = te.MultiDesc,')INSERT INTO #tbl_ScriptVALUES (' en.InhSw = te.InhSw,')INSERT INTO #tbl_ScriptVALUES (' en.InhFrom = te.InhFrom')INSERT INTO #tbl_ScriptVALUES ('FROM AttrName en, #tbl_AttrName te')INSERT INTO #tbl_ScriptVALUES ('WHERE en.AttrRef = te.AttrRef')INSERT INTO #tbl_ScriptVALUES (' AND en.LanRef = te.LanRef')INSERT INTO #tbl_ScriptVALUES (' AND te.LanRef = 0')-- Do update Test the dataINSERT INTO #tbl_ScriptVALUES ('UPDATE l')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' l.TestID = t.TestID,')INSERT INTO #tbl_ScriptVALUES (' l.PrtTestRef = t.PrtTestRef,')INSERT INTO #tbl_ScriptVALUES (' l.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' l.EdtblSw = t.EdtblSw,')INSERT INTO #tbl_ScriptVALUES (' l.NmValRef = t.NmValRef')INSERT INTO #tbl_ScriptVALUES ('FROM Test l, #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('WHERE l.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')--DELETE where just updatedINSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t, Test l')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = l.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM te')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE te.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Insert TestAttrINSERT INTO #tbl_ScriptVALUES ('INSERT INTO TestAttr (AttrRef, TestRef, Seq, PrtRef,AttrType,Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestRef, t.Seq, t.PrtRef, t.AttrType,t.Value, t.TermDate, t.AttrID, t.DefSw, t.WantSw, t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('')-- AttrNameINSERT INTO #tbl_ScriptVALUES ('INSERT INTO AttrName(AttrRef, LanRef, Code, [Desc],MultiCode,MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('SELECT te.AttrRef, le.AttrRef, te.Code, te.[Desc],te.MultiCode, te.MultiDesc, ')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN 0')INSERT INTO #tbl_ScriptVALUES (' ELSE 1 END,')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN NULL')INSERT INTO #tbl_ScriptVALUES (' ELSE 0 END')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE le.TestRef = ' + CAST(@Lan_TestRef as varchar))INSERT INTO #tbl_ScriptVALUES ('')-- Insert new rowsINSERT INTO #tbl_ScriptVALUES ('INSERT INTO Test(AttrRef, TestID, PrtTestRef, AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestID, t.PrtTestRef, t.AttrType,t.EdtblSw, t.NmValRef, t.SrtTypeRef')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_Test')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_TestAttr')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_AttrName')-- Update RefGenDECLARE @RefGenReflast int,@RefGenRefStr varchar(10)SELECT @RefGenReflast = lastFROM RefGenWHERE RefGenRef = 1SELECT @RefGenRefStr = ISNULL(CAST(@RefGenReflast as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES('')INSERT INTO #tbl_ScriptVALUES('UPDATE RefGen')INSERT INTO #tbl_ScriptVALUES ('SET Last = ' + @RefGenRefStr)INSERT INTO #tbl_ScriptVALUES ('WHERE RefGenRef = 1')INSERT INTO #tbl_ScriptVALUES ('')GOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************RegardsGlenn
View 5 Replies View RelatedHi guys,I wanna ask bout the problem with my web application. I'm doing a select a statement from table 1 and and with the query results i got, i need it to store the result on table 2. How will i do this? I need your tips and suggestions.
View 1 Replies View RelatedI'm running asp.net 2.0 and acessing MSSQL 2K. I am trying to run a query in which I need to set up variables first. I tried the following group of commands as shown, passing it to the SqlDataReader object, but it failed.. does anyone know how i can pass multiple SQL commands? MainQuery = "declare @MinGrades as Table(GradeID Bigint) " & _ " INSERT @MinGrades SELECT MIN(CreditGrades.SplitID) AS Expr1" & _ " FROM CreditGrades INNER JOIN" & _ " CreditGradeSplits ON CreditGradeSplits.CreditGradeSplitID = CreditGrades.SplitID " & _ " WHERE (CreditGrades.x0x30 = - 1 OR " & _ " CreditGrades.x0x30 >= 0) AND (CreditGrades.x1x30 = - 1 OR " & _ " CreditGrades.x1x30 >= 0) AND (CreditGrades.x2x30 = - 1 OR " & _ " CreditGrades.x2x30 >= 0) AND (CreditGrades.x3x30 = - 1 OR " & _ " CreditGrades.x3xNOD >= 0) " & _ " GROUP BY CreditGradeSplits.CreditGradeGroupID" & _ " Select * from @MinGrades "
View 2 Replies View RelatedI am experiencing a situation where I issue a lengthy SQL command to MS SQL Server 7.0 through MTS and it "disappears" - no errors or recordsets are returned. The command is "SELECT * FROM CUSTOMERS WHERE LASTNAME LIKE 'SMITH%'". When I issue this command from SQL Query Analyzer it takes 27 seconds to return 87 rows. When I issue this exact same command through MTS it does not return at all.
I've used the SQL Profiler to analyze the requests. It shows the commands from MTS starting but they never stop (or at least the profiler never reports them as stopping). The same commands coming from Query Analyzer are reported as starting and stopping without fail.
Here's a twist: I can issue less demanding commands (ie, one that doesn't take so long to process) through MTS and they come back fine. For example, when a user logs into my application, I use an SQL statement to verify the user name and password and status the user as logged in. This is routed through MTS and it comes back fine in less than a second. Same application, same PC, same MTS and SQL server, same SQL database. The only difference is that the CUSTOMERS table has over 800,000 records and the USERS table has only 5 records.
PLEASE HELP!
Hi,
I am very new to sql server and I have been reading up on the dbcc commands. For instance, DBCC SHOWCONTIG where do I execute this command? I went into the cmd prompt and opened osql and typed:
1> DBCC SHOWCONTIG
2> GO
This gives me the information for what I assume is the master database. But, how do I use this command under the other databases?
Also, I have been trying to learn how to determine when to do index maintenance by using the index tuning wizard. But, I don't know what a workload is. Can someone point me in the right direction or give me some information about this topic.
Thanks,
Laura
Hi
Please can someone point me in the direction, i built a very badly designed database consisting of only one huge table when i first started databases, since learning about normalization i have designed and set up a new database which consists of many more tables instead of just the one. My question is where do i start in transfering the data from the old single tabled database to my new multi-tabled database?
I have MS SQL server 2005 managment studio if that helps, but want to transfer around 200,000 rows of data into the new database. Both new and old databases are on the same server.
thanks in advance
I have a job that runs between the hours of 10 PM and 9 AM. It launches a controller stored procedure that will call other stored procedure until the entire process is done.I would like the controlling stored procedure to only call the steps between the hours of 10PM and 9AM also.. So at 8:59 AM it will start the next step, but at 9:00 AM it will exit.
View 6 Replies View Relatedhi all
when i set up a new subcription ,i notice in hte replication monitor thet this subscription 'uninitialize subscription' and the are 70 undelevier commands.
how can i fixed this problem,or how can i remove those undeleveirs commands?
thanx
Hi All,Is there way that commands executed in the query analyzer get loggedautomatically?TIAJoriz
View 3 Replies View RelatedHi al,
Are there commands that are not supported when mirroring is active? (truncate table, bcp, set identity insert on/off etc.)
Hi
Can we use
DBCC CHECKIDENT ('dbo.MyTable', RESEED, 0)
Command in Stored procedure. Which executes daily.
Thanks
Sridhar K
Hello, I am running SQL 2000 SP4 on a Windows 2003 standard edition server.
The SQL database gets changed/updated through a web interface. I was wondering if there was any way for me to see which SQL commands were being run on the database when changed like deleting/inserting users are being applied from the Web frontend?
Any help is appreciated, thanks.
Robert
When we send any SQL command to database engine , how exactly it gets executed?
View 7 Replies View RelatedHow can I make sure that a couple of commands are either all executed on the database or none of them. For example right now I have an insert, update and delete command. I'm calling each of them with a SqlCommand. So I am afraid that that one of them might be executed, then there's a bad connection and the other two are not. How can I prevent this so that only all commands or nothing is executed on the database?
View 2 Replies View RelatedIs there a way to have two sql update commands so I can use both during an update depending on which row it is?
View 1 Replies View RelatedHi everyoneI created a database graphically in VS2005.Now I want the text version of those DDL(create) commands. Question is where and how are those commands stored in SqlServer I have the management studio too. Any ideas??
View 2 Replies View RelatedPlease forgive me if my questions seem very simple. I'm trying to pick up vb.net, asp.net, and SQL all at the same time, and while making progress in some areas I'm finding other questions I have harder to figure out where to look for answers.
First question - if I want to join 2 tables do the fields I'm joining on have to have the same name? I know they have to be of the same type, but does the name itself matter? For instance in this line of code I try to join forums
objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON msg_forums.forum_moderators = users.user_ID"
Second question nagging at me, since I specify the table <msg_forums and users> before the field names <forum_moderators and user_ID> does it matter which one comes first? See, my primary table in this line is msg_forums, so do I have to specify it's field first, or does that even matter (or do I have it backwards and need to specify the other one first)?
Last question, and of course the root of what's caused me to wonder about all of this. I'm getting an error similar to some of what I found in the forums, but it's slightly different in that it says there is a problem near "OR". As far as I can tell I've written this correctly, and so, I'm stumped. Here is the error followed by the code. Thanks a bunch for any assistance anyone offers. :-) Incorrect syntax near the keyword 'ON'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'ON'.
'This time trying to learn an adapter instead of a reader, will also try a join
'Build the connectionDim StrConnection As String = (System.Configuration.ConfigurationManager.AppSettings("DbConnect"))
Dim objConnection As New SqlConnection(StrConnection)Dim objdataadapter As New SqlDataAdapter()
Dim objdataset As New DataSet()
'set the SelectCommand Properties objDataadapter.SelectCommand = New SqlCommand
objdataadapter.SelectCommand.Connection = objConnection
'try after renaming to fields to match
objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON msg_forums.user_ID = users.user_ID"
'Try without specifying the table
'objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON user_ID = user_ID"
'Original attempt
objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON msg_forums.forum_moderators = users.user_ID"
objdataadapter.SelectCommand.CommandType = CommandType.Text
'open the database connection
objConnection.Open()
'Fill the dataset with object data giving the dataset to use and the table name (primary table even when pulling from a couple)objdataadapter.Fill(objdataset, "msg_forums")
'close connection
objConnection.Close()
'Set DataGridView properties
grdforums.AutoGenerateColumns = True
grdforums.DataSource = objdataset
grdforums.DataMember = "msg_forums"End Sub
End Class
I'm more used to mysql, which i haven't coded for a while, but how do you show tables? or show databases you have available from the osql prompt?
View 3 Replies View RelatedHow do you load and unload data using the commands load and unload in SQL Server? I am using UNIX Script to call isql.exe
Ex:
This code gives an error of "Incorrect syntax near keyword 'to'
unload to '/tmp/lot/test.unl'
select * from test
go
I was pointed to this forum by one of the admins who has started doing some consulting work for us. We did a major conversion over the weekend for our main production server to SQL 2005 from SQL 2000. We have used replication to go from the live OLTP server to a few dedicated report servers for all of our reporting needs. In 2000 this was pretty well established (though a pain when we had to migrate in changes; I love the 2005 schema features for replication).
The only problem we have really encountered today, the Day After, involves replication. A few minor things involve lack of knowledge (like nonclustered indexes don't replicate by default, that was an OOPS). But one thing I haven't figured out yet.
Replication is working -- we are updating three servers, and all three servers are getting updates. I have run a validation on one of them and it passed in full. However, the "undistributed commands" count never goes down. It actually keeps going up and up. I verified that by first running this on the subscriber:
select transaction_timestamp
from MSreplication_subscriptions
And taking the results of one of the three rows that came back and executing this with it:
sp_browsereplcmds @xact_seqno_start = '0x00000231000006ED000100000001'
which brought back all of the "undistributed commands". Within that list, I looked for sp_MSins_ procedures. I found a few and looked up on the subscriber the value to be inserted -- and it existed on the subscriber. So it still is in MSrepl_commands even though it has been sent out.
I am afraid that eventually the system will "think" that the process isn't working and deactivate the subscriptions. Also this is useless as a monitor. Since this is our first major replication in 2005, I am willing to bet that we are missing something. Does anyone have any advice?
I want to display the data in a datasheetview in ms access project.
The data is between particular date. What command should i used for this?
My form contailn feilds : UserId,FromDate,ToDate
Enter the userid & Particular date & after click on submit data for that period should display in datasheet view.
Please help me in this as soon as possible.
Visual Studio 2005
i have insert and update statements. they don't produce any errors but no
changes happen in my tables. are there any possible reason for this. i used
sqlcommand and even stored procedures but still the same.