I have to change someones username in my database in a couple of tables. When I try to make any changes, I get an error that there is a constraint. Is there a way to make the changes without removing all the constraints then replacing them?
Thanks
I know this is probably a flick of a switch but I cannot figure out which switch. Setup is SQL Server / Stored Procedures / DAL / BLL(skipped for testing) / PL. The stored procedure queries from only one table and two columns are ignored because they are being phased out. I can run the stored procedure and preview the data in the DAL but when I create a page with an ODS linked to the DAL and a GridView I get this error. I checked every column that does not allow nulls and they all have values. I checked unique columns (ID is the only unique and is Identity=Yes in the table definition). I checked foreign-key columns for values that are not in the foreign table and there are none. Any ideas why do I get this?
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
Hi,
I am getting the above error when trying to load a report into my Web Application, I have tracked the error down to one specific field in my database. Even though this field is a NVarChar field and is of size 30 it would seem that there is an issue returning the value from the field. I can write it into the database no problems but when I try to get it out of the database it returns the above error.
e.g
MOB 401.908.804 - Fails
0401.907.324 - okay
8239 9082 (pager) - fails
Anyone got an idea on how to fix this????
Regards..
Peter.
Hi,
I have a update trigger on table a and table b to a staging table. I run a dts package which updates data in b based Based on the values in the staging table. At this stage I don't want the trigger on table b to be fired. Does anyone have any ideas on how to do this?
Thanks
I'm trying to search for all records that contain a quotation character in the database. These records were migrated from a mainframe system.
I use the following command:
%'%
The results are:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]Unclosed quotation mark before the character string ' order by cliLastName, cliFirstName, cliBirthName'.
/ladds/lib/getrecordset.asp, line 6
Is there a way to override the quotation character temporarily?
Thanks ...
Hi,I have a select statment that correctly returns zero rows at times. Iwould like to be able to return the value 0 (a single row with thevalue 0) whenever the logic returns zero rows.something like thisIf no.of.rows.returned = 0 thenoutput 0elseoutput query resultsend ifCan anyone poing me in the right direction to do this?many thanks,yohan
View 6 Replies View RelatedA website that I'm working on has users sign in and keeps a log of the pages they go to. The log table has a foreign key in it that links to the username is the users table. I need to update the username for one of the users but the foreign key is preventing me from doing so. What is the benefit of having a foreign key like this? Can I delete it to update the username or is there a better way?
View 1 Replies View RelatedI need copy a table from a remote (hosted) SQL 2000 database server to my local machine. I don't have access to backups and am unable to correctly configure my local machine to add a linked server. So I plan to retrieve the data to a datatable, copy it in code and save it to my local server. But the table contains an identity column which I will need to insert the values manually so they match the original.
Can anyone tell me how I can set the datatable's save to use my manual values instead of the autonumber value?
Thanks.
I received a request to create a stored proc with following:
I have a view with the following columns
(table1 - AppCode, AgencyID, CompnyID, CustCode, CustVal)
I have a proc that will take the following parameters and return all matching rows (AppCode, AgencyID, CompnyID, CustCode(optional))
The trick: Any customcode with the CompnyID should override the AgencyID parameter.
How can I change a linked report to get the 'override default' button back.
Some idiot changed it to a hardcoded value and now I want to have the default back.
I wrote a report in Visual Studio with some parameters that I gave default values to in the report definition. I deployed it out to the report server and when I look at the report Properties, Parameters section to see the default values. Instead of seeing all of the default values, I see a bunch of "Override Default" buttons. When you click the buttons, you get a blank text box in which to enter a new value.
Someone before me created a report with default values and the parameters section of that report has text boxes with the default values in them.
Does anyone know how to have the default values show up rather than those "Override Default" buttons?
Thanks.
If a column is set to allow nulls I know that a constraint can be used to supply a default (i.e. GetDate() ) when no value is provided but what about when an explicit NULL is provided in an INSERT or UPDATE statement?Is there any way other then an AFTER trigger to substitute a value for an explicitly provided NULL? In other words, assuming that dtAsof is a NULL enabled column, is there any way to over ride what the following will do to MYTABLE:
INSERT MYTABLE(sCol1, sCol2, sCol3, dtAsOf)
SELECT 'a', 'b', 'c', NULL
If there's no way to do this in SQL Server 2008R2 then what about later versions of SQL Server? Do any more recent versions have a way to deal with this? We have a third party app that uses a SQL Server back end and many of the tables have columns for storing audit like data such as date/time but many are left to NULL values and I'd really like to fix that in as passive a way as possible so as to not break the app that uses the database. I know a constraint with a default can be sued to over ride a null but not when a null is explicitly provided.
Is there any possibility to override database audit specification file. suppose i want to change some logs forcefully . is it possible ?
View 5 Replies View RelatedI am creating printed questionnaires based on data in a table. Portions of the layout must be exact and not be moved on the page.
I have some textboxes and rectangles on the left of a report and a table on the right. The table forces all the controls on the left to appear AFTER the last row and I can find no workaround. Basically, no controls can appear to the left of a table. The texboxes on the left give instructions to the user on how to fill out the items in the table on the right and I need them to remain where I place them. I have many other reports that require fixed positions.
Other report writers have texbox and label options to work around this . For example Visual Foxpro has an "Object Position" property with options for "Float", "Fix position relative to top of band", "Fix position relative to bottom of band". This allows the position to be forced if necessary.
This is very much needed and wanted in the Report Writer and I request it for the next release or service pack.
I have created a package that use SSIS check pointing for failure-retry mechanism. I knew that when this package fails, on restarting the package it starts from the task where it got failed.
Is it possible for me to override this on a custom condition and start the package at an earlier task where it executed successfully?
Ex:
Check pointing is enabled.
FTP task è Write to Staging Table è Write to Target table.
Assuming I am downloading XML file through FTP and writing to a table.
FTP Download is successful.
Read from XML file and write to Staging table task failed because of downloaded file is not a well formed XML.
Here, FTP task is completed successfully; it failed only in the second task. When I re-run the package; it starts from the second [Read from XML file and write to staging table] task because of check pointing.
Is it possible for me to restart from the FTP task on a custom condition where it executed successfully?
I'm using MS SQL 2000 with enterprise manager I have a customers table called high_customer, it has a primary key called IDI have an invoices table called high_invoices, it has no primary keys but it does have a column for customer ID.I want to set it so if a customer is deleted from the customers table, any invoices with that customerID are deleted from the invoices table.Do I need to specify a constraint? If so how do I do it in enterprise manager.Thanks
View 1 Replies View RelatedHi,
I have the following problem:
I have a table called Jobs with the fields:
JobNumber, Name, Customer, ...
And a table called Customers with the fields:
ID, Name, Address, ...
Obviously Jobs is linked to Customers with the Customer<->ID fields. I want to set it up so that if a Customer is deleted, then any Jobs that had that customer listed now have the Customer field set to NULL. Can I do this with a constraint, or will I need to use a trigger?
Cheers,Little'un
Hello,
I am not a DBA and I need to do the following.
I have 2 tables A and C and both have a common fileds say emp.Emp is pkey in C .
There can be a record in C but not in A.If a record is inserted in A then it checks for the same employee info in C .If not found it do not allow to insert a record in A.
How to go for it?
Thanks!
Hiya peops!!
Listen i was wondering if anyone could tell me whether they know the correct syntax for creating constraints or where i could find it on the net???
Thanks
Hiya peops
im creating a constraint using enterprise manager for 1 of my tables n was wondering how u constructively create a constraint expression, there is a specific style,right??
Thanks
hi there,
i have added my tables and defined foreig keys and primary keys for my table, but when i try to put the data it gives me some error reagards to parent key..and it wont let me drop the table... can anybody tell me how to drop the foregin key..i have tried (
ALTER TABLE module DROP CONSTRAINT ATTENDANCEID_FK;)
this formula and it wont work,
heres my tables and relationships:
CREATE TABLE ATTENDANCE
(ATTENDANCEID char(4) NOT NULL,
StudID char(4) NOT NULL,
ModuleID char(4) NOT NULL,
Week1 VARCHAR(10),
Week2 VARCHAR(10),
Week3 VARCHAR(10),
Week4 VARCHAR(10),
Week5 VARCHAR(10),
Week6 VARCHAR(10),
PRIMARY KEY (ATTENDANCEID));
ALTER TABLE ATTENDANCE
ADD FOREIGN KEY (studID) REFERENCES student(studID);
ALTER TABLE ATTENDANCE
FOREIGN KEY (moduleID) REFERENCES module(moduleID));
insert into ATTENDANCE values
('F1','A1','E1','Yes','Yes','Yes','Yes','Yes','Yes');
insert into ATTENDANCE values
('F2','A2','E2','Yes','No','Yes','Yes','No','Yes');
insert into ATTENDANCE values
('F3','A3','E2','Yes','Yes','Yes','No','Yes','Yes');
insert into ATTENDANCE values
('F4','A4','E2','Yes','Yes','Yes','Yes','No','Yes');
insert into ATTENDANCE values
('F5','A5','E1''Yes','Yes','No','Yes','Yes','Yes');
insert into ATTENDANCE values
('F6','A6','E2','Yes','Yes','Yes','Yes','Yes','No');
insert into ATTENDANCE values
('F7','A7','E1','Yes','Yes','Yes','Yes','No','No');
insert into ATTENDANCE values
('F8','A8','E2','Yes','Yes','Yes','No','Yes','Yes');
insert into ATTENDANCE values
('F9','A9','E3','Yes','Yes','No','Yes','Yes','Yes');
CREATE TABLE MODULE
(ModuleID char(4) NOT NULL,
ATTENDANCEID char(4) NOT NULL,
ModuleName varchar(45),
ModuleCode varchar(6),
PRIMARY KEY (ModuleID));
ALTER TABLE MODULE
ADD FOREIGN KEY (attendanceID) REFERENCES attendance(attendanceID);
insert into MODULE values
('E1','F1','Workshop Research and Project Implementation','Im3023');
insert into MODULE values
('E2','F2','Advanced Database Development','SD3042');
insert into MODULE values
('E3','F3','Advacned Information Systems Develpment','SD3043');
charles
I am fairly new at SQL and also new to this forum. So I don't know if this topic belongs here or not.
But anyways, I found this tutorial online. However, I am having trouble completing it. Can someone please help me?
Given the following table definitions:
CREATE TABLE USERS
(
USERID CHAR(5) PRIMARY KEY,
NAME VARCHAR(30),
RATING CHAR(1) CHECK (RATING IN (A, B,C,D)
)
CREATE TABLE ITEMS
(
ITEM_NO NUMBER PRIMARY KEY,
DESCRIPTION VARCHAR(50),
OFFERED_BY CHAR(5) REFERENCES USERS(USERID) ON UPDATE CASCADE ON DELETE CASCADE,
START_DATE DATETIME,
END_DATE DATETIME,
RESERVE_PRICE NUMBER
)
CREATE TABLE BIDS
(
USERID CHAR(5) REFERENCES USERS ON UPDATE CASCADE ON DELETE SET NULL,
ITEMNO NUMBER REFERENCES ITEMS(ITEM_NO) ON UPDATE CASCADE ON DELETE CASCADE,
BID NUMBER,
BID_DATE DATETIME,
PRIMARY KEY(USERID,ITEMNO,BID_DATE)
)
Directions: Indicate whether the statement is accepted or rejected; and if accepted indicate its effects. Evaluate each statement INDEPENDENTLY.
1) INSERT INTO ITEMS VALUES(1009, Red Bicycle,U01,1999-01-08, 1999-02-10, 30)
2) UPDATE ITEMS SET ITEMNO=1008 where ITEMNO=1001
3) DELETE FROM ITEMS WHERE ITEMNO=1005
4) INSERT INTO ITEMS VALUES(1010, Green Bicycle,U07,1999-01-08, 1999-02-10, 30)
5) UPDATE BIDS SET ITEMNO=1011 WHERE ITEMNO = 1001
6) DELETE FROM USERS WHERE USERID=U01
7) UPDATE ITEMS SET ITEMNO=1020 WHERE ITEMNO=1001
8) DELETE FROM BIDS WHERE BID > 1001
Thanks. I would greatly appreciate your help.
My table structure is something like this :
ORDER_ITEM (OrderSK, ItemNumber, Qty, ServiceSK, UnitPrice)
SERVICE (ServiceSK, Description, UnitPrice)
How could I modify the database structure to enforce the data constraint that ORDER_ITEM.UnitPrice must be equal to SERVICE.UnitPrice for the corresponding service.
i have a question about constraints in SQL server.
i have three tables:
Client
---------
clientID
name
etc...
Bank
-------
BankID (a virtual number, identity)
ClientID (FK: Client)
BankAccountNumber
BankName
Order
--------
OrderID
ClientID
BankID
a Client an have one or more bankAccounts.. if he place an order, he can select wich bankaccount will be used to pay.
how do i have to set the constraints so that the bankAccount in Order, is allways of THAT client in order.???
Thanx...
Hi,
Just getting into scripting sql. I have a little script that adds and drops a default value for a column. But I cannot get it to run when the column already has a default value specified. If I didn't script the contraint and specify a name I have no name to specify when trying to drop it.
ALTER TABLE users ADD CONSTRAINT dev1 DEFAULT 1 FOR ns_email_flag
ALTER TABLE users DROP CONSTRAINT dev1
How do I remove any existing default values using script?
TIA,
Seoras.
How does one know what a particular trigger or constraint is supposed to be doing on a table. I am just two days old on this position, and no form of documentation, at the same time I am expected to trouble-shoot some error messages. Thanks for your help.
View 3 Replies View RelatedWhen I first set up my database, I set it up with many unique constraints, but not much in the way if indexes. After reading more about the benefits of indexes, I'm thinking of deleting many of the unique constraints, and replacing them with unique indexes where appropriate.
It seems that indexes would be better than unique constraints in many cases, because you have the double benefit of enforcing uniqueness, as well as improving sorting capability. Does this make sense?
Hi folks,
Wonder if I'm onto something....everything I've read says that to drop foreign key constraints, you have to drop/recreate the table.
I've been able to dynamically create the ALTER TABLE statements for all FK constraints in a database. The way I did was a little convoluted (Access 97 linked tables and pass-through queries, cut/paste from the debug window to SQL7 QA), but it does work. More importantly, it saves the hassle of dropping/recreating tables....Someone with more expertise than I in using nested cursors could probably convert it to pure T-SQL pretty easily.
Just curious...opinions? Be glad to post the code here if that's appropriate.
Dan
How do i create a check constraints on column a so it dose not accept $ character? syntax pls.
Thanks
Can anyone recommend a good article/book on the subject? I am trying to find out more about compound primary keys. How many is “too many”? Does the number of primary key columns affect your performance? If so, how does it affect it? Should some of the constraints be handled from stored procedures?
Any response is greatly appreciated.
:cool:
Executed as user: companyadmin user. Violation of PRIMARY KEY constraint 'PK_tblRMAProduct'. Cannot insert duplicate key in object 'tblRMAProduct'. [SQLSTATE 23000] (Error 2627) The statement has been terminated. [SQLSTATE 01000] (Error 3621). The step failed.
View 1 Replies View RelatedHi,
I am developing a database for my company in SQL server 2000 and I have some
few problems.
Firstly.
I have a customers table and orders table in my DB:
Customers Orders
--------- ------
CustID (primary key) ----------------< CustID
. ^ ProductID
. | Quantity
. | .
. | .
etc. | etc.
|
relationship
(one to many)
What I want to do is:
1) to be able to delete a Customer and automaticaly SQL server delete all the
orders that this customer done from the Orders table.
2) If for some reason the CustomerID changes, SQL should be able to
automaticaly update the necessary fields with the new values in the Orders
table.
Finally, 3) I want to be able to insert a new customer that has an order
and update both the Customers table and Orders table automaticaly. e.g
CustID Name Address ProductID Quantity etc.
------ ---- ------- --------- -------- ----
10-003 John London 33-25 2 ...
Such a kind of insert should add automaticaly the following entries in the
two tables:
Customers Orders
--------- ------
CustID (10-003) CustID (10-003)
Name (John) ProductID (33-25)
Address(London) Quantity (2)
. .
. .
etc. etc.
A friend of mine told me that this can be done using Foreign Check constraints
in SQL server. But I do not know what to do.
Can anybody help me please?
Thank you very much.
Efthymios Kalyviotis
ekalyviotis@comerclub.gr
I have a question regarding the use of check constraints. I see how to set it up to make sure a value entered is one of a list using this syntax:
([eft_vc] = 'No' or [eft_vc] = 'Yes')
However, rather than have to hard code the allowable values, I'd like to have them read off another table. The logic would be as follows:
([eft_vc] in (select * from eft_t))
When I try to put this in, I get a message saying that constraints do not support subqueries. Does anyone know of a way around this?
thank you,
Darell