PDF Appears In Landscape But Prints In Portrait
Apr 28, 2008
All of my reports that are formatted 11x8.5 are outputting to PDF correctly. When I open the PDF in Adobe Acrobat, it appears in Landscape on the screen. However, when I click the print button, by default it is printing it in portrait. I can go to File-->Print Setup and change the orientation from Portrait to Landscape, but why doesn't it translate from the file orientation? This may just be a bug in the Adobe Acrobat software, but I want to make sure there isn't something I can do.
Thanks.
View 1 Replies
ADVERTISEMENT
Apr 15, 2008
We have a report that prints correctly (in landscape) in the folder that is deployed to but the linked report in a different folder prints in portrait?
can anyone shed some light on this.
View 2 Replies
View Related
Dec 5, 2007
Hi
I'd like a parameter for the report layout: Portrait Or Landscape. So is it possible to set the page high and width using an expression or in code based on my parameter?
Also on a similar note. I want a parameter for 'Page Break After X'. Is it possible to apply a page break after my table group X based on this parameter? I know if I edit the group I can tick 'page break at end' but I can't apply an expression to this.
Cheers
View 8 Replies
View Related
Sep 27, 2006
The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over. Your suggestions / comments are appreciated.
Thanks!
View 1 Replies
View Related
Oct 20, 2006
I'm trying to use the PRINT statement to trace what an SP is doing, while
running in QA.
However, some PRINTs seem not to print anything. I can see that the
code part is being executed.
Any ideas? (It's just simple prints like print 'executing an insert' .)
View 5 Replies
View Related
Apr 29, 2008
In my SQL2005 SSRS table, I have formatted the numbers to be C0 (currency, 0 decimal places). The numbers display like this: Even the fomat expression builder shows an R in its example!
R 456,220
In the same report, a table immediately above it that I created yesterday is formatted the same way but displays with the correct formatting:
$456,220
What did I do? Thanks!
View 7 Replies
View Related
Jan 26, 2007
Hi,
I have several reports out of which only one report is acting weirdly.
The report displays fine when I open it up but when I try to print it,
it only prints the first page. I tried exporting it to PDF and the same
thing, the PDF has only one page. I tried exporting in all formats and
found that PDF and TIF are not working but the other formats (web
archive, HTML, XML and CSV) are fine. The excel format gives me this
error:
Exception of type
Microsoft.ReportingServices.ReportRendering.ReportRenderingException
was thrown. (rrRenderingError) Get Online Help
Exception of type
Microsoft.ReportingServices.ReportRendering.ReportRenderingException
was thrown.
Index was out of range. Must be non-negative and less than the size of
the collection. Parameter name: index
I need the PDF format to work. Any ideas why this particular report is
bad? Another note of interest. This report uses only a subreport that works
fine in another report. Please help.
Thanks,
Anand
View 1 Replies
View Related
Jul 29, 2015
I know how to size my report to export successfully to A4 portrait PDF and I can position the report in the centre of the browser window BUT I can't do both! I would really like to be able to position it in the centre of my browser window AND be able to print to A4 portrait PDF. If I have the report in the centre (by adjusting the body to take up the whole screen and positioning the report in the centre), it is cut in half when exported to PDF. I can only get it to export to PDF correctly, if the report is aligned to the left of my screen in the browser. Is there a way to move the body to the centre or any other tricks?
View 5 Replies
View Related
Apr 10, 2007
I am using SQL RS 2005 with VS2005 in Windows Application. I have placed Report Viewer on Windows From and then report is attached with it. Now report previews well in BIDS as well as in VS2005. Moreover it exports perfectly to pdf and excel but when I click print button on report viewer and give direct print to printer, font size, textbox, rectangle and every other thing become large, like instead of 10 font size, it prints 12, instead of 240 width of rectangle, it prints 280 or so.
There must be some solution to this thing. Some one help
View 3 Replies
View Related
Jul 11, 2007
I am getting an error "An error occured during printing (0x80004005)" - when i am trying to print - and the i still am able to print - but only 1 page.
Thre registry key - Reporting services was not there - so i created it at
[HKEY_CURRENT_USERSoftwareMicrosoftMicrosoft SQL Server80Reporting Services]
"LogRSClientPrintInfo"=dword:00000001
Please help - what should i do now ?
View 4 Replies
View Related
Jul 20, 2005
My code prints out 0 for the value of charindex ( 'Hello.', '.' ).Did I miss something? I think it should print out 6!
View 1 Replies
View Related
Aug 8, 2007
Hello, I have a report that looks fine in preview, but when put to PDF or printed contains gaps at the right and bottom.
Here is a picture of the problem: http://northeasttigers.webng.com/pdfproblem.jpg
My tables are the same width as the body, 15.5cm, and the report width is 21cm. Also adding the bottom table's top location attribute to it's height gives the same height as the body.
Any help much appreciated.
Greg
View 4 Replies
View Related
Nov 12, 2007
I am very new to Reporting Services. When I set the report to landscape, either by setting width and height at 11 X 8.5 when in layout, or by setting landscape in page setup when I am in preview, a blank page prints in between each report page. I've checked the forum, and tried setting margins to 0, but have not had any success. I saw this response:
the body width plus margins should be less than the defined page width. but I'm not sure what settings are being referred to
Has anyone been able to solve this problem?
Thanks very much.
Sue
View 3 Replies
View Related
Jun 4, 2007
Hi Guys,
I have a report which I can print in landscape if I want to see all columns(by manually selecting Lanscape).
When exporting to PDF it defaults to portrait so the last column get cut off to another page.
Is there a simple solution fo this?
thanks
sonny
View 3 Replies
View Related
Apr 25, 2008
Hi, I need help please!
Apologies for the silly question.
I have a problem where i need to show 18 columns in 1 row but can get it in one row, the most the user wants is 2 rows but the first 4 columns cant be touched.
eg.
row1 Col1 Col2 Col3 Col4 Col5 Col6 Col7 Col8 Col9 Col10 Col11
row2 12 13 14 15 16 17 18 19 20 21 22 23 24 25
I am kind of lost on how to show this in a nice format.
Does anyone have any creative idea, as i would like to capture the users.
The Fields are also lengthy so it makes it difficult.
Please!
Regards
View 5 Replies
View Related
Jan 14, 2008
Hi,
Is there a way to set the default page settings to landscape view when im exporting to adobe?
I have set the page settings off the report to be
width 21cm
height 28cm
thanks
View 2 Replies
View Related
Jan 28, 2007
How can I set the page orientation to landscape? I tried to set "printDocument.DefaultPageSettings.Landscape = true;" but it didn't work. I have spent hours fixing the problem but I couldn't get it work. Below is the code:
private void printDocument_PrintPage(object sender,
System.Drawing.Printing.PrintPageEventArgs e)
{
e.HasMorePages = false;
printDocument.DefaultPageSettings.Landscape = true;
System.Drawing.Font printFont = new System.Drawing.Font("Arial",
12, System.Drawing.FontStyle.Regular);
e.Graphics.DrawString("Set the page orientation to landscape!", printFont,
System.Drawing.Brushes.Black, 30, 30, new StringFormat());
}
Could someone please tell me what is wrong with it, or what I should do to get it work? Your help is very much appreciated.
Thannks.
View 6 Replies
View Related
Feb 17, 2007
Hello
I have a report which I can print on legal paper, once I choose the landscape settings on print menu. When the same report is set to export to a file share in pdf format, it renders in portrait format. Is it possible to have the pdf document look like the landscape view so that the user can just hit print.
Thanks
Inder
View 5 Replies
View Related
Oct 12, 2007
Hello, I have a report that I am creating in sql reporting services, I want my report to be exported in landscape PDF file format. I Went to the report properties then set the width = 11 in and height 8.5.
When i export my report to a PDF file it did not display it in landscape format!
Do i need to make the report go sideways? if yes how! for example
how would i write a textbox which has the label Time sideways?
Thanks
View 4 Replies
View Related
Aug 30, 2006
I have a report that is setup to print landscape.
I deploy to Report Manager, print it, and everything works great.
If I create a linked report from the deployed report, the linked report prints portrait.
Does anyone know of a workaround or am I just doing something wrong?
Thanks!!
BobP
View 6 Replies
View Related
Jul 18, 2007
I ahve a report, that has 24 fields in the layout. When I tried to print the reprot, it prints BLANK pages, in between and at the start. I have confirmed that the width BODY of the report, < width of the report properties. It still prints blank pages.Pl advise.
View 1 Replies
View Related
May 6, 2008
I have a report that needs to be on landscape, but am only limited to printing portrait style when I render a PDF report in reporting services. Is it possible to render a report in landscape or even better, size the PDF via reporting services.
Eytan
View 3 Replies
View Related
Sep 23, 2005
I've thrown together a homegrown Reporting Services viewer that is basically a wrapper for a browser control. It will reside in our app alongside the Crystal report viewer until we have phased out Crystal.
View 3 Replies
View Related
Jul 25, 2008
I am trying to set default print settings for a report on Reporting services.
I need to make to make a page print out on landscape by default.
Â
I cant seem to find this option anywhere.
View 7 Replies
View Related
Jan 23, 2007
I have reports, set to print on Landscape and Legal ie 14 * 8.5. However, when certain users try to print the report, it prints it in Letter, even though the report is set to print in legal /landscape.
The strange part is that for most users it prints correctly in legal, only for some it is on letter. Any idea why this would happen?
View 4 Replies
View Related
Nov 22, 2007
Does anyone know how to prevent automatic landscape setting?
I need it to print an invoice/receipt-like form which using custom paper size (width: 8.5in, height 5.5in)..it is half of letter size and must be printed as portrait.
RS has problem that it turns landscape automatically if the width is longer than height, which is not expected.
By the way Crystal Report can do this successfully but CR has another different problem also......
Can RS do the same as CR in term of page layout? Please help...
View 3 Replies
View Related
Feb 5, 2008
My company has a .Net app that embeds the reportwriter for displaying (and printing) reports. This seems to work fine visa vis printing reports in landscape mode, although odly if you look at the printer properties it SAYS it is priting in portrait. In any case, the problem comes when this default reportwriter isn't used but rather an rdl file is generated programmatically. No matter what width and height settings we use, the document unfailingly prints in portrait mode. I've looked to see whether there is any way to force the printer mode, but it seems there isn't, at least not through an rdl. Or what SHOULD work (setting the width larger than the heigh) does not. I'm wondering if anyone else here has run into difficulties like this if there are any solutions or places I might look for answers? Thanks!
View 1 Replies
View Related
Nov 6, 2015
I have a report that I need to develop in landscape format. Also I need it to be landscape when converting to PDF and taking printouts. let me know the exact height and width measurements in inches for the report and report body?
I need the margin to be 0.5 inch.Â
View 4 Replies
View Related
Jan 16, 2007
Hello,
I am trying to print a report in landscape mode from VS 2003 from designer preview or at run time. The users don't want to change a mode manually. I tried to make width 11 or 11.5 in and height 8.5in with zero margins and 0.5in (tried a lot of combinations) - doesn't work! still printing in portrait. Please help! Thank you
View 7 Replies
View Related
Apr 26, 2004
Hi,
Below messages got throwed to sql ErrorLog. I could'nt understand what it means.. any help is appericated.
The Scheduler 2 appears to be hung. SPID 0, ECID 0, UMS Context 0x03CBAA40.
Error: 17883, Severity: 1, State: 0
WARNING: EC 36b9c098, 8 waited 300 sec. on latch 444f3b84. Not a BUF latch.
thanks,
-J
View 3 Replies
View Related
Aug 13, 2004
Hello,
The users of my microsoft SQLServer 7 database could not log on to the database after the following message has appeared in the log file;
The Scheduler 0 appears to be hung. PSS 0x5B1630C8, EC 0x5B163278, UMS Context 0x3FC37E88
The problem was solved after I have restarted the database. I would be grateful if you could show me how to avoid such a problem in the near future.
Regards,
Albert
View 4 Replies
View Related
Apr 6, 2004
I have SQL Server 2000 SP3 and the default Code Page is:
I have a Table with a column of the type 'text'.
In this column sometimes it's necessary introduce the euro symbol (€). Now, when we write this symbol, after the SQL Server show it with a '?'.
I tried change the column collation to 'Latin1_General_CI_AI', ‘SQL_Latin1_General_CP1_CI_AI’ and ‘SQL_Latin1_General_CP850_CI_AI’ but there is the same problem.
Does any know what the cause off this problem is?
Thanks in advance!
View 2 Replies
View Related
Feb 12, 2007
Here's what I did to a VS2005 Smart Device application.
Removed the reference to System.Data.SqlServerCe.dll.
Set a reference to C:Program FilesMicrosoft SQL Server Compact Editionv3.1SDKinwce500 System.Data.SqlServerCe.dll.
While it€™s loading in the emulator I notice that it appears to still be loading SQLCE3.0 instead of 3.1.
Deploying 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0wce500ARMV4isqlce30.ppc.wce5.armv4i.CAB'
Deploying 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0wce500ARMV4isqlce30.repl.ppc.wce5.armv4i.CAB'
Deploying 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0wce500ARMV4isqlce30.dev.enu.ppc.wce5.armv4i.CAB'
Do I need to set something else?
View 1 Replies
View Related
