PHP User Tries To Untangle Filthy Mess Of .NET
Mar 15, 2006
"" Then MM_LoginAction = MM_LoginAction + "?" + Request.QueryString
MM_valUsername=CStr(Request.Form("userId"))
If MM_valUsername "" Then
MM_fldUserAuthorization=""
MM_redirectLoginSuccess="/private/private.asp"
MM_redirectLoginFailed="/private/privatelogin.asp"
MM_flag="ADODB.Recordset"
set MM_rsUser = Server.CreateObject(MM_flag)
MM_rsUser.ActiveConnection = MM_conConsumer_STRING
MM_rsUser.Source = "SELECT LastName, Password"
If MM_fldUserAuthorization "" Then MM_rsUser.Source = MM_rsUser.Source & "," & MM_fldUserAuthorization
MM_rsUser.Source = MM_rsUser.Source & " FROM dbo.PLStaff WHERE supervisor != 570 and LOWER( left(firstname,1)) + LOWER(lastname) ='" & Replace(MM_valUsername,"'","''") &"' AND Password='" & Replace(Request.Form("password"),"'","''") & "' and Emp_state = 1 "
MM_rsUser.CursorType = 0
MM_rsUser.CursorLocation = 2
MM_rsUser.LockType = 3
'response.Write(MM_rsUser.Source)
MM_rsUser.Open
If Not MM_rsUser.EOF Or Not MM_rsUser.BOF Then
' username and password match - this is a valid user
Session("MM_Username") = MM_valUsername
session.Timeout = 30
If (MM_fldUserAuthorization "") Then
Session("MM_UserAuthorization") = CStr(MM_rsUser.Fields.Item(MM_fldUserAuthorization).Value)
Session("manager") = 1
Else
Session("MM_UserAuthorization") = ""
End If
if CStr(Request.QueryString("accessdenied")) "" And false Then
MM_redirectLoginSuccess = Request.QueryString("accessdenied")
End If
MM_rsUser.Close
Response.Redirect(MM_redirectLoginSuccess)
End If
MM_rsUser.Close
Response.Redirect(MM_redirectLoginFailed)
End If
%>
Where do I find out the name of the table being accessed to authenticate the user?
View 2 Replies
ADVERTISEMENT
Nov 11, 2007
Hi
I had sql server 2005 standard edition and express edition and sql 2000 desktop edition all installed on my xp notebook.
Whe i tried to create a maintenance plan in sql 2005 standard edition i got an error saying that it couldn't load something (which looked like it might be dll) so I tried to reinstall sql 2005 standard edition over the top to replace the dlls. However the install wizard told me that it can't do anything as all components are already installed!
So i decided to remove SQL 2005 and start again.
In add remove programs i removed various components (like vss writer, and one or two others) then when i clicked on SQL 2005 to remove it I got a message saying that it had already been removed and would i like to remove it from the add remove programs list.. so i said yes.
It actuallly appears that it is installed (after a fashion) although i can't connect to it anymore in ssms. If i put the cd in to try to reinstall it still tells me that it's already installed....i'm stuck now!
So.. i need to do something drastic to remove sql 2005 (as i can't remove it from the add remove programs and the CD won't let me reinstall over the top)
Can anyone help me with any suggestions to physicall remove it
View 1 Replies
View Related
Mar 20, 2008
I am trying to verify and create new user based on Billing Statement information. The user may not be the ID of the statement but has a
relationship to that ID.
Here is the data I will be passing:
Statement PrepDate
Statement PatBal
BillTo Address
BillTo Name
Patient DateofBirth
Patient Name
relevant table info:
BILTOS
BillToID, Name (user match), Address1(user match)
STMTHIST
BillToID, PrepDate (user match), PatBal (user match)
PATIENTS
BillToID, Name (user match), BirthDate (user match), Email, PatientsID
PATWEB
PatientID, UserName (user input), PIN (user input), Question (user input), Answer (user input)
I also check to make sure the username doesn't already exist in the PATWEB table
here is what I have so far that is not working (table reference not unique - BILTOS)
INSERT INTO PATWEB (PatientID, UserName, PIN, Question, Answer, LastAccess)
SELECT PATIENTS.PatientID, 'bcolladay@pdsmed.com', 'osx5ief7*', 'What', 'green', CurDate()
FROM PATIENTS, BILLTOS
JOIN PATIENTS BILLTOS ON PATIENTS.BillToID = BILLTOS.BillToID
WHERE not exists (select * from PATWEB Where PATWEB.PatientID = PATIENTS.PatientID)
AND PATIENTS.BirthDate = '1971-05-03'
AND PATIENTS.Name LIKE 'lui%'
AND STMTHIST.BillToID = PATIENTS.BillToID
AND STMTHIST.PatBal = '215.00'
AND STMTHIST.PrepDate = '2008-03-05'
AND BILLTOS.Address1 = '987 Worley St'
AND BILLTOS.Name LIKE 'Lui@'
so I am checking to see if the billing statement and other info they supplied matches before I create the account in PATWEB.
I appreciate any help, thanks
View 2 Replies
View Related
May 24, 2007
Say for example I have the following 2 database tables, the first one contains the old employee data, and has the fields shown below:
oldEmployeeID
FirstName
LastName
DateOfBirth
HiringDate
TerminationDate
and another one containing the new employee data with similar fields but instead of oldEmployeeID, it is showing the newEmployeeID.
During the conversion process, something were messed up and instead of putting in the original hiring date of the workers into the new employee database, the conversion date was put in, which, depending on the mood of HR ladies, could be any date, and at the same time, of course, new employee join the company, and we assume their hiring dates were entered correctly. On top of that, there are some employee who were terminated before the conversion took place but we still need to keep a record of that.
And I created a third table, say, emplyeeAll with similar fields to the employee data tables.
So here is what I need to do: if the firstName, lastName and DateOfBirth in the old employee data table and the new employee data table matches, I would assume they are the same employee, hence I would put the information for the employee obtained from the new employee data table to the employeeAll table, with the Hiring Date changed to the Hiring Date of the old employee data table (and do not copy the record from the old employee table to prevent duplicates), otherwise, I would simply copy and paste the data in new and old employee table to my employeeAll table.
I know this is really confusing, but...well...hope you know what I am saying...
Is it possible to have a SQL statement for all these? If so, how should the statement looks like?
Thanks a lot!
Regards,
Anyi
View 6 Replies
View Related
Feb 6, 2007
Hi,
I've been asked to sort out a mess as follows:
two dbs on one server...
first db has a user called 'bob'.. that's the login on the server and also the login name on the db in question.
this db has several SP's owned by 'bob' which need to copied to the second db.
Here's where the problem starts.
Somehow, this second db has the standard users it needs, however the db User has a LoginName of 'bob'..
So basically if I try and create a user of 'bob' on the second server which will then allow me to copy these SP's across it says it already exists.. but if I just go ahead and try and copy the SP's it says the User does not exist.
Just to clarify what I mean..
I go into the 2nd db using EM.
go to users:
the visual that appears shows me several users in order with their
Name | Login Name | DB Access
the dbo user is set as:
dbo | bob | 2nd db
basically what I need (I think) is for that login Name to be removed from the dbo user and applied to specific user called bob...
how do I do that?
View 6 Replies
View Related
Apr 9, 2001
Fairly new to DBA work. In error log receiving message Error 1105 Can't allocate space for object 'Syslogs' in database 'msdb' because the logsegment is full.
I've looked in books and is this a serious problem, as I've tried to increase the size of the MSBD device but it will not allow me it says the Max size allowed is -1197MB...Is this right
Any help would be good...
View 1 Replies
View Related
Mar 2, 2007
hi
i have a SSRS report where matrix is embedded into table.
when i view the deployed report in IE, it works fine
But when i view the report in FIREFOX browser.. the report for toss..
the alignment of the report is completely screwed up :-(
My client badly requires Firefox support for all their reports
Any suggestion and help would be appreciated
Thanks
View 5 Replies
View Related
Dec 7, 2006
This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database)
Help pleaseee
View 3 Replies
View Related
May 22, 2008
Hi,
Please give the T-SQL script for this ? Thanks
Shanth
View 4 Replies
View Related
Sep 28, 2007
When I am in Visual Studio 2005, and I try to add an SQL database, I get the following error "generating user instances in sql server is disabled. use sp_configure user instances enabled to generate user instances." I am currently using SQL server 2005 Express. What do I need to do, to create an SQL database? Thanks in advance.
View 4 Replies
View Related
Nov 22, 2007
i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.
why ?
View 3 Replies
View Related
Mar 3, 2008
Cannot open user default database. Login failed.Login failed for user
'NT AUTHORITYNETWORK SERVICE'. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Cannot open user default database. Login
failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. I have This Error When i try to log into My online web site, i have no idea how to fix it,one day it was working and the next it wasnt, is there any way to find out what database the default is and if it's either incorrect or not present change the web.config in a way that will make my system work. i have the NT Authority/Network Service in my Server Properties Permissions, its given the type login and is granted Connect SQL by sa i have 3 colder copies of the web site on my server my question is, how would i use of of these to restore the original site configuration is there a way to restore the original configuration to undo whatever it is i've done to break the system ChrisStressed
View 3 Replies
View Related
Dec 6, 2013
I would like to know if there is a way to find out who changed a users roles/access WITHOUT using the audit function. For example, if a user account was created and given SA access then changed to read only, how can I find out who made that change? I tried searching for an answer, but kept getting no results. I'm thinking this may tie into the sys.sysusers view?
View 3 Replies
View Related
Jan 23, 2007
Hi,
I have several reports for users to view on our Intranet. After installation of SQL 2005 SP2 patch, I cannot delete user or user's authority from Report in Properties Tab. An error message was shown on the status bar. It indicated that JavaScript Error: 'Return' statement outside of function. Seems something wrong with the 'Delete' funciton in SQL 2005 after update. The other functions worked fine. Could you point me out how to fix it or need to install any updates / hotfix. Thanks a lot!
Regards,
Kenneth Lai
Programmer
Error Pic
Message Box
View 1 Replies
View Related
Apr 25, 2007
Hi, I'm new to SQL Express 2005.
I found information regarding : "Cannot open user default database. Login failed."on this forum but I think that in my case it's a bit different issue.
I have a website (ASP.NET 2.0) accessing DB, in the mean time Windows Service tries to update some data in the same DB (Service runs as NT AUTHORITYLOCAL SYSTEM). The second connection is rejected: "Cannot open user default database. Login failed.Login failed for user ....".
Problem occurs only when both: service and website are running at the same time. So service and website are running without problems when they are connecting DB exclusively.
My connection string is:
"Data Source=.SQLEXPRESS;AttachDbFilename="|DataDirectory|spider-lab.mdf";Integrated Security=True;User Instance=True"
I would be grateful if you can help me
View 1 Replies
View Related
Aug 19, 2006
Hi,
I have a copy of VS2005 and i have installed the Microsoft SQL Server Developer Edition
I am trying to do my first connection using ASP.net (yay for me...) and it has failed...with this error..Login failed for user 'testuser'. The user is not associated with a trusted SQL Server connection.
can someone please point out why? yes i know that the error seems pretty straight forward but how do i fix it? like how do i make the user a trusted server connection? where do i do it? and what are the steps? the user is an administrator and by rights should have all access to everything....
connection string
SqlConnection MySQLConnection; MySQLConnection = new SqlConnection("server=cmptrname\databsename;uid=testuser;password=password;database=mytest");
btw while your reading do you have any examples of opening a db with the connection string in the web.config file? because i get some error "connection string has not been initialised" using the
system.Configuration.ConfigurationManager.AppSettings.Get
i though i would stick to the top code first before i tackled the web config error first....
Thanks heaps
View 10 Replies
View Related
May 1, 2007
I need help. The security principal is the correct DomainUser, but the error message says I am not authenticated.
So here is my error Message:
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Me.User.Identity.Name=CompanyDomainRyan; System.Security.Principal.WindowsIdentity.GetCurrent=CompanyDomainRyan; HttpContext.Current.User.Identity.Name=CompanyRyan
Generated by:
Dim secPrinc As System.Security.Principal.WindowsIdentity = System.Security.Principal.WindowsIdentity.GetCurrent
Me.lblError.Text = ex.Message & vbCrLf & vbCrLf & "Me.User.Identity.Name=" & Me.User.Identity.Name & "; System.Security.Principal.WindowsIdentity.GetCurrent=" & secPrinc.Name & "; HttpContext.Current.User.Identity.Name=" & HttpContext.Current.User.Identity.Name
Here is the Connection String:
Private ConnString As String = "Server=10.144.162.111;Database=DNS;Trusted_Connection=True"
IIS has 4 websites hosted on it. The parent level allows anonymous with windows auth off, but the website level has anonymous off with widnows auth and digest.
In IIS, is there a problem with having the parent level anonymous and website level windows auth?
View 1 Replies
View Related
Feb 18, 2008
All the research I found dealing with this problem is that the solution is to set SQLserver to mix mode. I have SQL server already set to mix mode. I am not sure what else to do. Has anybody run into this problem?
my connection string: <connectionStrings>
<add name="ConnectionString" connectionString="Data Source= server name ;
Initial Catalog=FILESHAREDB.MDF;
Integrated Security=false;"providerName="System.Data.SqlClient"/>
</connectionStrings>
Server Error in '/SendItNow' Application.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Source Error:
Line 41:
Line 42: 'open the connection and execute the stored procedure
Line 43: mConnection.Open()
Line 44: mResourceID = mCommand.ExecuteScalar()
Line 45: mConnection.Close()Source File: H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb Line: 43 Stack Trace:
[SqlException (0x80131904): Login failed for user ''. The user is not associated with a trusted SQL Server connection.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
ResourceDB.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message, Int32 ID) in H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb:43
Resource.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message) in H:MIS DepartmentIntranetSendItNowApp_CodeBllResource.vb:31
ContentFiles_Default.ImageButton1_Click1(Object sender, ImageClickEventArgs e) in H:MIS DepartmentIntranetSendItNowContentFilesDefault.aspx.vb:33
System.Web.UI.WebControls.ImageButton.OnClick(ImageClickEventArgs e) +86
System.Web.UI.WebControls.ImageButton.RaisePostBackEvent(String eventArgument) +115
System.Web.UI.WebControls.ImageButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
View 2 Replies
View Related
Mar 18, 2008
Hi all,
I am new in asp.net. In my web.config file, I wrote the connection strings as below and then I got the above error. I already changed SQL server Authentication mode to "SQL server and Windows". Any idea? Thanks in advance.
<connectionStrings>
<remove name="LocalSqlServer" />
<add name="LocalSqlServer" connectionString="Data Source=xxx;Initial Catalog=mydb;User ID=test;Password=test;Persist Security Info=False;"
providerName="System.Data.SqlClient" />
</connectionStrings>
View 1 Replies
View Related
Jan 26, 2000
Our server has integrated security setup, upon startup of the server,
we have a continuous flow of error msg:
Login Failed: Reason: User '_' not defined as a valid user of trusted
connection.
The timing of these messages only around 30 seconds apart
The only incident from Technet I can find is Q186314, but we don't have replication setup, anyone knows where I can look into ?
I recycle the server but didn't help.
I appreciate any help I can get ..
Thanks.
View 1 Replies
View Related
Feb 18, 2014
I am relatively new to sql developer. There is a new user that just joined our organization. I am trying to grant him the same direct grants privilege to the tables that an existing user has. The existing user has a ton of direct table access privileges and it will take days if I had to do each grant one by one like: grant select,insert,delete,update on 'table name' to 'user id'. Is there a way of copying or inserting an existing user's privilege and granting it to a new user.
View 2 Replies
View Related
Oct 22, 2014
I have an SSIS package built by another developer, and now that I'm running it under my login the passwords won't save. The solution and packages are setup with ProtectionLevel EncryptSensitiveWithUserKey, but how do I get the User Key to reset so I can now save passwords? I can re-enter them, but whenever I enter hte password and test it then click OK it still has the red arrow next to the connection as if there's an error. I can create new connections and those passwords save fine, but with 40-50 items in this package I hate the thought of having to go into each and change the connection.
I tried changing the package and solution to DontSaveSensitive then rebuilding and closing then reopening, I hoped there was some option to reset the User Key just as if I created the solution. If this option doesn't exist why?
View 1 Replies
View Related
Jan 22, 2008
I'm using the RTM version of Visual Studion 2008 and SQLServer Express.
Logged in as an administrator, I can create a connection to an mdf file and all is well.
As a normal user, attempting to create a connection gives the message "sqlservr.exe has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have tried this with UAC turned on and turned off. The result is the same. In Services I can see that SQLEXPRESS is running, but each time I try to connect, I get the "stopped working" message.
For existing database programs that have the .mdf file stored in the project folder, I can run the program in the VS IDE on my XP machine and on my Vista machine as administrator, but not as a normal user.
I'm not looking for a workaround to make this work once, but the cause and solution to the problem. This is for an introductory VB textbook and we must be able to move a database program from one machine to another and make it work. Everything I have read says that SQLExpress should be able to do that.
Can anyone help me with this?
Judy Fraser
View 26 Replies
View Related
Apr 28, 2008
I cant find a reason why its doing this
Code Snippet
Login failed for user 'KOQuotes'. The user is not associated with a trusted SQL Server connection.
View 4 Replies
View Related
Jan 25, 2008
Hello,
I am trying to migrate reporting services from SQL server 2000 to SQL 2005. I followed the migration steps listed in one of the TechNet documents. Installed SQL 2005 and SP2.
Backed up existing SQL 2000 databases and restored on SQL 2005.
Went to Configuration tool and then to the Database setup. Connected to SQL 2005.
Clicked on the Upgrade button. The upgrade fails and I always get the following errors:
"The database version (C.0.6.54) does not match your reporting services installation. You must upgrade your Reporting services database"
Then I get this exception:
System.Data.SqlClient.SqlException: Cannot find the user 'RSExecRole', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
I do not understand why it is looking for user 'RSExecRole', which is a role.
Appreciate your help
View 3 Replies
View Related
Apr 28, 2008
I cant find a reason why its doing this
Code Snippet
Login failed for user 'KOQuotes'. The user is not associated with a trusted SQL Server connection.
View 11 Replies
View Related
Jul 12, 2010
My goal is to write a DR plan where i am restoring all user databases onto a diffrent server in a event of hardware failure. I was trying to figure out a way to extract DDL of user accounts and their permissions on all user databases so i can simplify my DR documentation.Â
Â
This is the plan I came up with...to restore all system and user dbs on a different Physical SQLServer.
1. build named instance $PROD
2. restore master database
   - startup sqlserver in single user mode -m or DAC sqlcmd -S ServerName -U sa -P<xxx> –A
   net stop MSSQLSERVER$PROD
   net start MSSQLSERVER$PROD -m
   - restore database master from disk e:master.bak with replace;
  Â
3. start sqlserver normally
4. stop SQLServer agent
5. restore msdb
-restore database msdb disk e:msdb.bak with replace;
6. restart SQLServer
7. Restore User Databases.
8. Run Sp_change_users_login for all users
-Sp_Change_users_logins 'auto_fix','username'
View 7 Replies
View Related
Apr 9, 2007
Hi all,
I was wondering whether there is a way to show the user an error when the user did not select a specific parameter.
In my case, I have two optional parameters. The user has to select either one to view the report. If the user does not select either one, I would like to show some sort of an error page indicating so. However, all i am getting is a complete blank with no report in sight. I as a developer know this is an error as a result of missing parameters, but i was wondering whether I could produce a page or direct it to a page so that the user doesn't go all horrified at an empty page ?
Thanks
Bernard
View 4 Replies
View Related
May 9, 2008
Hi All,
We have setup a SCOM 2007 Server and in this we have SQL 2005 SP2, We are using two accounts one for OPRATIONAL DATABASE and another one for REPORTING DATABASE after this setup everything was working fine but suddenly my SDK account which is for REPROTING DATABASE was locked by entering wrong password and afterwards I unlocked the password but SINCE this i'm not able to connect to my REPORTING DATABASE and i'm getting following ERROR:- Login Failed for user 'username'. The user is not associated with a trusted SQL Server connection.
Taken following action to rectify this problem:
1) Resetting the SDK password with the same password.
2) Restarted all the SQL and SCOM services.
3) Restarted the Server as well.
4) Converted from WINDOWS AUTHENTICATION mode to MIXED mode.
But the problem is still persisting, Please help ASAP.
Regards,
Akhilesh
View 1 Replies
View Related
Apr 5, 1999
Hi,
i'm a newbie in SQL. I can't connect to SQL 6.5 server using ASP ADO. Below is the program code
<%
set conn=server.createobject("adodb.connection")
conn.open "dsn=Central;uid=sa;pwd="
%>
An error message appears
Login failed- User: Reason: Not defined as a valid user of a trusted SQL Server connection.
I've already created a ODBC System DSN named Central
parameter Server Local and used Trusted connection checked.
Then under sql Manager there is a sa with a blank password.
Please help.
View 1 Replies
View Related
Jul 21, 2015
Running a report on sqlserver RS 2008 R2 that uses a data source that looks at a database on a sql express 2012 server.
I can run the report in preview mode from bits on the sql 2008 r2 server.
I have tested the connection of the  deployed data source on the sql 2008 R2 reporting services web page and connection has been successful.
I can logon to sql express 2012 using  management studio and logon as the user and access the database run stored procedures etc.
windows server 2003, sql server 2008 R2 reporting services server.
windows server 2012 sql express 2012 data source database location.
View 13 Replies
View Related
May 29, 2007
We are looking at developing an SQL Server 2005 Database and I would like to use Windows Authentication rather than SQL Server Authentication to connect our client app.
In our development environment, we have two Servers, one being used as a file server and the other as an SQL Server. We have now set up a domain using the file server as the domain controller. (We had previously been set up to use a workgroup).
I have set up an active directory group called SqlDevelopers and added an active directory user called Jonathan to it.
On the SQL Sever, in management studio, I have set up a new server login which uses windows authentication called DomainSqlDevelopers. I used the GUI to verify I could see the domain and the group.
The default database is set to a test database on the server. A user in the test database is mapped to the DomainSqlDevelopers and given the Roles dbo, db_datareader, db_datawriter.
To test the log in, on the server, I logged out as administrator and in as Jonathan. I could successfully access the server through management studio using windows authentication.
However, if I log in as Jonathan on my client PC and try to access the SQL Server using management studio and windows authentication, I have problems.
The first time I try I will get a timeout error. If I try again will get either:
Login failed for user ''. The user is not associated with a trusted SQL Server connection
Or
Cannot generate SSPI context
I can€™t determine any pattern to which of the above errors I get.
However, if I log in as administrator on my client PC, I can connect to the server using management studio and windows authentication.
Sounds like Active Directory/Domain or other Network issue (Not really my area). I would be grateful for any help.
Thanks,
Jon
View 9 Replies
View Related
Mar 11, 2008
I received the above error yesterday and haven't been able to trace it to any job or process running. We haven't implemented any changes to the server in the past few months, and it doesn't look to be a user-established connection, since the Client IP Address of the SSPI handshake error is from the server itself.
I logged this set of messages in SQL AgentServer error log:
Date 10.03.2008 6:15:19 PM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)
Message
[298] SQLServer Error: 18452, Login failed for user ''. The user is not associated with a trusted SQL Server connection. [SQLSTATE 28000]
Date 10.03.2008 6:15:19 PM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)
Message
[382] Logon to server '<server>' failed (ConnAttemptCachableOp)
Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
Error: 17806, Severity: 20, State: 2.
Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
SSPI handshake failed with error code 0x80090304 while establishing a connection with integrated security; the connection has been closed. [CLIENT: <IP Address>]
Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
Error: 18452, Severity: 14, State: 1.
Any help in explaining this would be greatly appreciated.
View 8 Replies
View Related