PIVOT With Subquery

Apr 18, 2008

Is it possible to create a pivot list, instead of hardcoding, without having to build it with dynamic sql ?
ie:

select * from (select Period, loan_id, mba_stat from lp_cq where loan_id = 'AaAaCz') a
pivot (
max(mba_stat) for period IN
(select cast(period as varchar) from lp_cq where loan_id = 'AaAaCz')
) b


instead of

select * from (select Period, loan_id, mba_stat from lp_cq where loan_id = 'AaAaCz') a
pivot (
max(mba_stat) for period IN
([1], [2],..[200])
) b

View 1 Replies


ADVERTISEMENT

Subquery, Select Case, Pivot Help. Is There An Easier Way?

Apr 12, 2008



I'm trying to select from a table with three columns. I want these columns to be spread out among multiple columns based on the values. I hope someone can shed some light on this. I might be able to use pivot, but don't know how the syntax would roll for this.

Here is the example of dummy values and the output I am trying to obtain.




drop table table1

create table table1

(Category int, Place int, Value int)

insert into table1 values

(1, 1, 20)

insert into table1 values

(1,2, 12)

insert into table1 values

(1,3, 30)

insert into table1 values

(2,1, 34)

insert into table1 values

(2,2, 15)

insert into table1 values

(2,3, 78)



select Category,

(select top 1 value from table1 where place = 1 and Category = t1.Category) as place1,

(select top 1 value from table1 where place = 2 and Category = t1.Category) as place2,

(select top 1 value from table1 where place = 3 and Category = t1.Category) as place3

from Table1 t1

group by Category




Thanks for the help.

View 5 Replies View Related

Subquery Returned More Than 1 Value. This Is Not Permitted When The Subquery Follows =, !=, &<, &<= , &>, &>= Or When The Subquery Is Used As An Expression.

Apr 26, 2008

hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues]    @Uid intASBEGIN    SET NOCOUNT ON;        select                                  DATEPART(year, c.fy)as fy,                                                (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1%      JRF' ) as survivorship,                (select contribeamount from wh_contribute where and contribename like  'Gross Earnings' and ) as ytdgross,                (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5%      JRP') as totalcontrib,                                                       from    wh_contribute c                       where    c.uid=@Uid                 Order by fy Asc .....what is the wrong here??  " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap... 

View 1 Replies View Related

Subquery Returned More Than 1 Value. This Is Not Permitted When The Subquery Follows =, !=, &<, &<= , &>, &>= Or When The Subquery Is Used As An Expression.

Jul 20, 2005

I am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO

View 3 Replies View Related

Subquery Returned More Than 1 Value. This Is Not Permitted When The Subquery Follows =, !=, &&<, &&<= , &&>, &&>= Or When The Subquery I

Mar 6, 2008

I am getting an error as

Msg 512, Level 16, State 1, Line 1

Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.

while running the following query.





SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,

LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,

LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,

LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,

ManagerName=(SELECT E.FirstName+' '+E.LastName

FROM EmployeeDetails E

INNER JOIN LUP_EmpProject

ON E.Empid=LUP_EmpProject.Empid

INNER JOIN LUP_FIX_ProjectDetails

ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid

WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)



FROM EmployeeDetails

INNER JOIN LUP_EmpDepartment

ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid

INNER JOIN LUP_FIX_DeptDetails

ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid

AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date

FROM LUP_EmpDepartment

WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid

ORDER BY LUP_EmpDepartment.Date DESC)

INNER JOIN LUP_EmpDesignation

ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid

INNER JOIN LUP_FIX_DesigDetails

ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid

AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date

FROM LUP_EmpDesignation

WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid

ORDER BY LUP_EmpDesignation.Date DESC)

INNER JOIN LUP_EmpProject

ON EmployeeDetails.Empid=LUP_EmpProject.Empid

AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate

FROM LUP_EmpProject

WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid

ORDER BY LUP_EmpProject.StartDate DESC)

INNER JOIN LUP_FIX_ProjectDetails

ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid



WHERE EmployeeDetails.Empid=1

PLEASE HELP.................

View 1 Replies View Related

Subquery Returned More Than 1 Value. This Is Not Permitted When The Subquery Follows =, !=, &&<, &&<= , &&>, &&>= Or When The Subquery I

May 14, 2008

Hi,

I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."

Any ideas as to why??

SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar,
RDR1.U_Variety,
(SELECT OITM.U_Variety
FROM OWOR INNER JOIN
WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN
OITM INNER JOIN
OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode
WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity,
OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet,
OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode
FROM OWOR AS t0 INNER JOIN
ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN
RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN
OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode
WHERE (t0.Status <> 'L')

Thanks

Jacquues

View 4 Replies View Related

Subquery Returned More Than 1 Value But Work FINE (field_xxx=subquery)

Jul 19, 2007

Hi guys,



A have a problem that I need understand.... I have 2 server with the same configuration...



SERVER01:

-----------------------------------------------------

Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)

Mar 27 2006 11:51:52

Copyright (c) 1988-2003 Microsoft Corporation

Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)



sp_dboption 'BB_XXXXX'

The following options are set:

-----------------------------------

trunc. log on chkpt.

auto create statistics

auto update statistics

********************************

SERVER02:

-----------------------------------------------------

Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)

Mar 27 2006 11:51:52

Copyright (c) 1988-2003 Microsoft Corporation

Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)



sp_dboption 'BB_XXXXX'

The following options are set:

-----------------------------------

trunc. log on chkpt.

auto create statistics

auto update statistics



OK, the problem is that if a run the below query in server01, i get error 512:



Msg 512, Level 16, State 1, Line 1

Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.



But, if run the same query in the server02, the query work fine -.



I know that I can use IN, EXISTS, TOP, etc ... but I need understand this behavior.



Any idea WHY?



SELECT dbo.opf_saldo_ctb_opc_flx.dt_saldo,

dbo.opf_saldo_ctb_opc_flx.cd_indice_opf,

dbo.opf_saldo_ctb_opc_flx.cd_classificacao,

dbo.opf_movimento_operacao.ds_tipo_transacao ds_tipo_transacao_movimento ,

dbo.opf_header_operacao.ds_tipo_transacao ds_tipo_transacao_header,

'SD' ds_status_operacao,

dbo.opf_header_operacao.ds_tipo_opcao ,

dbo.opf_header_operacao.id_empresa,

dbo.opf_saldo_ctb_opc_flx.ic_empresa_cliente,

0 vl_entrada_compra_ctro ,0 vl_entrada_compra_premio,

0 vl_entrada_venda_ctro , 0 vl_entrada_venda_premio,

0 vl_saida_compra_ctro, 0 vl_saida_compra_premio,

0 vl_saida_venda_ctro, 0 vl_saida_venda_premio,

0 vl_lucro , 0 vl_prejuizo, 0 vl_naoexec_contrato,

0 vl_naoexec_premio,

sum(dbo.opf_saldo_ctb_opc_flx.vl_aprop_ganho) vl_aprop_ganho,

sum(dbo.opf_saldo_ctb_opc_flx.vl_aprop_perda) vl_aprop_perda,

sum(dbo.opf_saldo_ctb_opc_flx.vl_rever_ganho) vl_rever_ganho,

sum(dbo.opf_saldo_ctb_opc_flx.vl_rever_perda) vl_rever_perda,

sum(dbo.opf_saldo_ctb_opc_flx.vl_irrf) vl_irrf

FROM dbo.opf_saldo_ctb_opc_flx,

dbo.opf_header_operacao ,

dbo.opf_movimento_operacao

WHERE dbo.opf_saldo_ctb_opc_flx.dt_saldo = '6-29-2007 0:0:0.000'

and ( dbo.opf_header_operacao.no_contrato = dbo.opf_saldo_ctb_opc_flx.no_contrato )

and ( dbo.opf_header_operacao.no_contrato = dbo.opf_movimento_operacao.no_contrato )

and ( dbo.opf_movimento_operacao.dt_pregao = (select (o.dt_pregao) from dbo.opf_movimento_operacao o

where o.no_contrato = dbo.opf_movimento_operacao.no_contrato and o.dt_pregao <='6-28-2007 0:0:0.000' ) )

and (dbo.opf_saldo_ctb_opc_flx.ic_tipo_saldo = 'S')

group by dbo.opf_saldo_ctb_opc_flx.dt_saldo,

dbo.opf_saldo_ctb_opc_flx.cd_indice_opf,

dbo.opf_saldo_ctb_opc_flx.cd_classificacao,

dbo.opf_movimento_operacao.ds_tipo_transacao,

dbo.opf_header_operacao.ds_tipo_transacao ,

ds_status_operacao,

dbo.opf_header_operacao.ds_tipo_opcao ,

dbo.opf_header_operacao.id_empresa,

dbo.opf_saldo_ctb_opc_flx.ic_empresa_cliente



Thanks

Nilton Pinheiro

View 9 Replies View Related

Adding Product Of A Subquery To A Subquery Fails?

Jul 6, 2014

I am trying to add the results of both of these queries together:

The purpose of the first query is to find the number of nulls in the TimeZone column.

Query 1:

SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename

The purpose of the second query is to find results in the AAST, AST, etc timezones.

Query 2:

SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')

Note: both queries produce a whole number with no decimals. Ran individually both queries produce accurate results. However, what I would like is one query which produced a single INT by adding both results together. For example, if Query 1 results to 5 and query 2 results to 10, I would like to see a single result of 15 as the output.

What I came up with (from research) is:

SELECT ((SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename) + (SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST'))

I get a msq 102, level 15, state 1 error.

I also tried

SELECT ((SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename) + (SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')) as IVR_HI_n_AK_results

but I still get an error. For the exact details see:

[URL]

NOTE: the table in query 1 and query 2 are the same table. I am using T-SQL in SQL Server Management Studio 2008.

View 6 Replies View Related

SSMS Express: Using PIVOT Operator To Create Pivot Table - Error Messages 156 &&amp; 207

May 19, 2006

Hi all,

In MyDatabase, I have a TABLE dbo.LabData created by the following SQLQuery.sql:
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
INSERT €¦ ) VALUES (2, 'MW2', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (3, 'MW2', 'Trichloroethene', 20.00)
INSERT €¦ ) VALUES (4, 'MW2', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (6, 'MW6S', 'Acetone', 1.00)
INSERT €¦ ) VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (9, 'MW6S', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (11, 'MW7', 'Acetone', 1.00)
INSERT €¦ ) VALUES (12, 'MW7', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (13, 'MW7', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (14, 'MW7', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (15, 'MW7', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (16, 'TripBlank', 'Acetone', 1.00)
INSERT €¦ ) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (19, 'TripBlank', 'Chloroform', 0.76)
INSERT €¦ ) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO

A desired Pivot Table is like:

MW2 MW6S MW7 TripBlank

Acetone 1.00 1.00 1.00 1.00

Dichloroethene 1.00 1.00 1.00 1.00

Trichloroethene 20.00 1.00 1.00 1.00

Chloroform 1.00 1.00 1.00 0.76

Methylene Chloride 1.00 1.00 1.00 0.51

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

I write the following SQLQuery.sql code for creating a Pivot Table from the Table dbo.LabData by using the PIVOT operator:

USE MyDatabase

GO

USE TABLE dbo.LabData

GO

SELECT AnalyteName, [1] AS MW2, AS MW6S, [11] AS MW7, [16] AS TripBlank

FROM

(SELECT SampleName, AnalyteName, Concentration

FROM dbo.LabData) p

PIVOT

(

SUM (Concentration)

FOR AnalyteName IN ([1], , [11], [16])

) AS pvt

ORDER BY SampleName

GO

////////////////////////////////////////////////////////////////////////////////////////////////////////////////

I executed the above-mentioned code and I got the following error messages:



Msg 156, Level 15, State 1, Line 1

Incorrect syntax near the keyword 'TABLE'.

Msg 207, Level 16, State 1, Line 1

Invalid column name 'AnalyteName'.

I do not know what is wrong in the code statements of my SQLQuery.sql. Please help and advise me how to make it right and work for me.

Thanks in advance,

Scott Chang

View 6 Replies View Related

Power Pivot :: One Slicer To Control Two Pivot Tables That Have Different Source Data And Common Key

Jul 8, 2015

I have two data tables:

1) Production data with column headers: Key, Facility, Line, Time, Output
2) Costs data with column headers: Key, Site, Cost Center, Time, Cost

The tables have a common key named obviously as Key. The data looks like this:

Key
Facility
Line
Time
Output
Alpha

I would like to have two pivot tables which I can filter with ONE slicer based on the column Key. The first pivot table shows row labels Facility, Line and column labels Time. Value field is Output. The second pivot table shows row labels Site, Cost Center, and column lables Time. Value field is Cost.How can I do this with Power Pivot? I tried by linking both tables above to a table with unique Keys in PowerPivot and then creating a PivotTable where I would have used the Key from the Keys table.

View 5 Replies View Related

Power Pivot :: Force Measure To Be Visible For All Rows In Pivot Table Even When There Is No Data?

Oct 13, 2015

Can I force the following measure to be visible for all rows in a pivot table?

Sales Special Visibility:=IF(
    HASONEVALUE(dimSalesCompanies[SalesCompany])
    ;IF(
        VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
        ;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
        ;[Sales]
    )
    ;BLANK()
)

FYI, I also have other measures as well in the pivot table that I don't want to affect.

View 3 Replies View Related

Power Pivot :: ALL DAX Function Not Overriding Filter On Pivot Table

Oct 14, 2015

I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.

The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.

The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.

Population N (denominator):
=CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1]))
Records in time interval (numerator):
=COUNTROWS(analyticJudConsist)
Percent:
=[countrows]/[denominatorCare]

View 13 Replies View Related

Power Pivot :: How To Apply Min Formula Under New Measure Within A Pivot Table

Aug 17, 2015

How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".

View 3 Replies View Related

Power Pivot :: Displaying Cumulating Numbers In A Pivot Table When There Is No Value

Mar 11, 2015

I have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:

1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values.
2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:

=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory])))
Here is the formula for the percent:
=(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))

View 24 Replies View Related

Power Pivot :: Measures Not Reflected In Pivot Table

Sep 18, 2015

I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem. 

What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?

View 3 Replies View Related

Power Pivot :: Difference Between Two Pivot Table Sums?

Nov 23, 2015

I have a data table that contains budget and actual data by month.  I use the data to create a pivot that shows actual results next to budgeted results.  I need a column that shows that variance between those columns.  I think my issue is that the "Type" field contains actual and Budget.  I sum on "Type".  I can't seem to create a sum since those items are in the same field or am I missing something?

Table design

Month|Division|Subdivision|Type|Dept|Rate|Units|Amount
October|DC|Day|Budget|125|10.00|100|1000
October|DC|Day|Actual|125|10.00|110|1100

Output Design

DC
DAY
Actual
Budget
125 AvgOfRate
AvgOfRate
SumOfUnits
SumOfUnits
SumOfAmt
SumOfAmt

View 4 Replies View Related

Power Pivot :: Slicer And Pivot Table Value Order

Oct 9, 2015

How to get a list of values to actually display in correct order in either a slicer or when on an axis on a pivot table?

I currently have the below list and have tried to add a preceding numeric (ex. "1. <=0") or preceding blank space, neither of which is visually great. Is there another way?

<= 0
1 - 6
7 - 12
13 - 18
19 - 24
25 - 30
31 - 36
37 - 42
43 - 48
49 - 54
55 - 60
61 - 66
67 - 72
73 - 78
79 - 84
85 - 90
91 - 96
97 - 102
> 102

View 8 Replies View Related

Power Pivot :: Printing From Pivot Table With Slicers

Apr 13, 2015

I am using excel 2010 and creating pivot table from Power Pivot.  I created a pivot table with department slicers.  All is good, the problem I am having is whilst in an unfiltered position (ALL) of the slicers (departments) I get 200 pages, now when I  click on a given department with say 10 pages, I still get the same 200 pages with the first 10 pages showing the data from the clicked department and 190 blank pages.

All I want is to get a WYSIWYG (What you see is what you get) of what is on the screen as my print, but I am getting extra blank pages right after the data.  How do I resolve this.

Below are the steps I go thru to print 

1. Select slicers in unfiltered position (ALL)
2. Select entire pivot table
3. Select Page layout  and select print area.
4.  Save
5. Click on Print Preview to preview the print
6. Click on a given department in the slicer and repeat item 5, but this gives me blank pages after the data.

Do I need any other step? 

View 2 Replies View Related

Pivot Task Error - Duplicate Pivot Key

Jul 5, 2006

I am using the pivot task to to a pivot of YTD-Values and after that I use derived columns to calculate month values and do a unpivot then.

All worked fine, but now I get this error message:

[ytd_pivot [123]] Error: Duplicate pivot key value "6".

The settings in the advanced editor seem to be correct (no duplicate pivot key value) and I am extracting the data from the source sorted by month.

Could it be a problem that I use all pivot columns (month 1 to 12) in the derived colum transformation and they aren´t available at this moment while data extracting is still going on?

any hints?

Cheers
Markus

View 3 Replies View Related

Pivot Example When You Don't Know The Exact Values To Pivot On

Sep 21, 2007

Say, I have the following temporary table (@tbl) where the QuestionID field will change values over time

Survey QuestionID Answer
1 1 1
1 2 0
2 1 1
2 2 2


I'd like to perform a pivot on it like this: select * from @tbl Pivot (min(Answer) for QuestionID in ([1], [2])) as PivotTable

...however, I can't just name the [1], [2] values because they're going to change.

Instead of naming the values like this:
for QuestionID in ([1], [2], [3], [4])


I tried something like this:
for QuestionID in (select distinct QuestionID from @tbl)

but am getting a syntax error. Is it possible to set up a pivot like this:
select * from @tbl Pivot (min(Answer) for Question_CID in (select distinct @QuestionID from @tbl)) as PivotTable

or does anyone know another way to do it?

View 3 Replies View Related

Power Pivot :: Auto Refresh Excel Table (Not Pivot Table) Using Data Source

Jul 8, 2015

Is it possible to generate automatic refresh of excel 2013 table which displays some table of a power pivot model on file open?? I dont want to use pivottable (which supports this ...)

View 2 Replies View Related

Power Pivot :: Pivot Table Loses Text Wrapping For Text Data Upon Refresh

Apr 29, 2015

I have a pivot table that connects to our data warehouse via a PowerPivot connection.  The data contains a bunch of comment fields that are each between 250 and 500 characters.  I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.

However, whenever I refresh the data, the text wrapping un-sets itself.  Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text.  This is very burdensome on the user, and degrading the experience.

Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?

View 2 Replies View Related

SQL And A Subquery

Jun 19, 2006

Hi and thanks in advance for the help.
Here's what I'm trying to do, I need to select all the rows from one table, and only 1 row from a related table.
Table setup
Table1:
Field 1 = PK Ident
Table2:
Field1 = FK ident
I need to select all the rows that exist in Table 1, and I need 1 row out of table2 where Field1 is equal to the Table1.Field1 value (multiple records in table2 will exist with that same value.)  I need the top row using a SELECT TOP 1
I was trying to do this with a subquery, but SQL is throwing an error asking me for EXISTS statments.
 

View 1 Replies View Related

T-SQL Subquery

Aug 11, 2006

I have the following as a subquery in a larger stored procedure:
SELECT P.ProductId, P.ProductName, P.Category , (SELECT MAX(O.Orderdate) FROM dbo.[Orders] AS O WHERE O.ProductId=P.ProductId) As MostRecentOrder, ROW_NUMBER() OVER (ORDER BY MostRecentOrder DESC) AS RowNumber FROM dbo.[Products] AS P WHERE P.Category=@category
@category is an input parameter
I am getting an error pointing to the Order By clause stating that "MostRecentOrder" is an invalid column name. If I sort by P.ProductId or P.ProductName, it works fine. Any ideas?
 
Thanks

View 16 Replies View Related

SubQuery Help!

Jan 13, 2007

Hi All, This Subquery is kicking my ***. Maybe you  can help. I want to query a query.I have the user enter a phrase from a textbox, then I want to group the results by element_label. This is what i have so far, but its not working.  SELECT Element_ID, Element_Label, Element_Name, Question_ID, Question_Label, Question_Level, Question_Text, RelatedSRR
FROM qryforaspx
WHERE ([Question_Text] LIKE '%' + ? + '%')
IN
SELECT Element_Label FROM Description
Group by
Element_label Thanks, 

View 2 Replies View Related

MS SubQuery Changes???

Jun 20, 2005

Has anyone seen where subqueries collapse into a sum???  I have code like the following, which has been running fine for over a year:UPDATE Reports..DataStats SET Vendors_Cnt = (SELECT COUNT(*) FROM vVendors__AllRecords), Vendors_Audit_Cnt = (SELECT COUNT(*) FROM vVendors_InvAudit), Vendors_Rpts_Cnt = (SELECT COUNT(*) FROM vVendors_Inv12mo), Vendors_InvUnused = (SELECT COUNT(*) FROM vVendors_InvUnused),Vendors_InvOne = (SELECT COUNT(*) FROM vVendors_InvOne), Vendors_InvMulti = (SELECT COUNT(*) FROM vVendors_InvMulti), Vendors_InvUnpaid = (SELECT COUNT(*) FROM vVendors_InvUnpaid), Vendors_InvNewer = (SELECT COUNT(*) FROM vVendors_InvNewer), Vendors_Inv12mo = (SELECT COUNT(*) FROM vVendors_Inv12mo), Vendors_InvPrior = (SELECT COUNT(*) FROM vVendors_InvPrior), Vendors_InvSkipYear = (SELECT COUNT(*) FROM vVendors_InvSkipYear), Vendors_Known = (SELECT COUNT(*) FROM vVendors_Known), Vendors_Orphaned = (SELECT COUNT(*) FROM vVendors_Orphaned), Vendors_Active = (SELECT COUNT(*) FROM vVendors_Active), Vendors_Inactive = (SELECT COUNT(*) FROM vVendors_Inactive), Vendors_Excluded = (SELECT COUNT(*) FROM vVendors_Excluded)WHERE (AuditName = @AuditName)But now it is generating overflows....and is not equivalent to (ignoring the obvious UPDATE vs. return differences for illustration):SELECT COUNT(*) FROM vVendors__AllRecordsSELECT COUNT(*) FROM vVendors_InvAuditSELECT COUNT(*) FROM vVendors_Inv12mo SELECT COUNT(*) FROM vVendors_InvUnusedSELECT COUNT(*) FROM vVendors_InvOneSELECT COUNT(*) FROM vVendors_InvMultiSELECT COUNT(*) FROM vVendors_InvUnpaid SELECT COUNT(*) FROM vVendors_InvNewer SELECT COUNT(*) FROM vVendors_Inv12mo SELECT COUNT(*) FROM vVendors_InvPrior SELECT COUNT(*) FROM vVendors_InvSkipYear SELECT COUNT(*) FROM vVendors_KnownSELECT COUNT(*) FROM vVendors_OrphanedSELECT COUNT(*) FROM vVendors_Active SELECT COUNT(*) FROM vVendors_Inactive SELECT COUNT(*) FROM vVendors_ExcludedThis appears to have started around the beginning of May.  Anyone else suffer after patches?

View 5 Replies View Related

Subquery Help

Jun 22, 1998

i have a table which i`m having difficulty setting up a subquery on.

cmpcode code grpcode
------------ --------- ------------
CORP 96020 01ADMIN
HON 96020 01ADMIN
LON 96020 04FOREIGN
LON 96020 01DIRECT
LON 96020 03ELLIOTT
LON 96020 02ACTIVE
NEW 96020 02INACTIVE
NEW 96020 01ADMIN
NEW 96020 03HOLECEK
SIN 96020 01ADMIN

what i would like to do is pull in only `codes` with a grpcode in (02active, 01direct). in the example above, i would only want the `lon` cmpcode to appear, since it`s both 01direct and 02active. since the grpcodes are on different lines, i`m not sure how to accomplish this. also, my key is cmpcode, code - not just code. here`s how i`ve been attempting to do it:

select
cmpcode,
code,
grpcode
from oas_grplist
where
elmlevel = 5 and
grpcode = `02ACTIVE` and
code in(select code from coda..oas_grplist where grpcode = `01direct`).

the problem with this is the subquery join is only based on joining code, and cmpcode needs to be included in the join.

any ideas?

thanks in advance, André

View 2 Replies View Related

I Need Help With A Subquery!

Sep 29, 2004

I have a SELECT statement with a subquery. I use an alias as I add the results of the subquery to the dataset. I then try to use the alias in the WHERE clause of the SELECT statement. I get an “Invalid column name “ message with this code:

select i.id as itemid,
(select top 1 ca2.itemid from itemassign ca2
inner join account a2 on ca2.accountid=a2.id
where a2.customerid=c.id and ca2.itemid=i.id)
as iaid
from item i
inner join customer c on i.customerid=c.id
where i.customerid=1 and iaid is null
order by i.id DESC


Server: Msg 207, Level 16, State 3, Line 1
Invalid column name 'iaid'.

If I run the statement without the and condition in the WHERE clause it returns a valid result.
Any input on this will be very appreciated!

Thank you,
IRead

View 1 Replies View Related

Need Help With Subquery

Jun 13, 2007

Sorry about my last post, it seemed to generate nothing but confusion. Hopefully I will explain the problem better this time.

Here are my tables with sample data:


Code:


abmtransmitter table:

Transmitter ID | Site_name | last_test_date | last_failed_test_date
A0001 Site01 2007-06-12 2007-06-10
A0002 Site02 2007-05-23 2007-06-06
A0003 Site03 2007-06-05 2007-06-12
A0004 Site04 2007-01-18 2007-05-18


AbmSignal Table:


Transmitter | Signal_id | Signal_date
A0001 trouble 2007-06-09
A0001 fail test 2007-06-10
A0001 test 2007-06-11
A0001 test 2007-06-12
A0002 test 2007-05-23
A0002 fail test 2007-05-30
A0002 fail test 2007-06-06
A0003 test 2007-06-05
A0003 fail test 2007-06-12
A0004 test 2007-01-18
A0004 fail test 2007-02-18
A0004 fail test 2007-03-18
A0004 fail test 2007-04-18
A0004 fail test 2007-05-18





I am trying to get a list of transmitters that have failed to send their scheduled communication test.
I only want a list of the transmitters who have failed two communications tests since the last successful test.
In the above data, the list would result with A0002 and A0004. A0001 passed it's most recent test, and A0003 has only failed one time since it's last successful test.
The following query does not look correct to me, but it does give me the results that *look* correct.
If it works, why does it work because I don't understand how the query on abmtransmitter is passing the value last_test_date to the subquery.
Or is this just a fluke and my result set looks correct but may not be?
'

Code:


Select Transmitter_id, Site_name from abmtransmitter where transmitter_id in
(select transmitter from abmsignal where signal_id = 'fail test' and signal_date > last_test_date
group by transmitter having count(transmitter) > 1) and last_failed_test_date > last_test_date Order by site_name

View 1 Replies View Related

Subquery

Aug 28, 2006

I have a subquery where I get 2 rows back which cause issues (since I can't return more then one). I am using this subquery in my function and I can't use a temp table in order to select the correct value. what other options do I have . My subquery returns 2 dates and I need to return from my function the max date.

View 1 Replies View Related

Doing LIKE On A Subquery

Apr 24, 2008

Hi

Im using sql server 2000 and I have sql statement that needs to do a LIKE statement from values from another table. An example would be the below

select Name, PostCode from Customers
where Post LIKE (select PartialPostCode + '%' from areas where area_arid = '123')

However if the above sub query returns more than one row then it will error. So I thought I would create a function to return a string such as the below and put it into vvariable

@strPostCodesLike = 'PostCode LIKE 'WS1 %' OR PostCode LIKE 'WS2 %'

And tried to execute the following SQL statement

select Name, PostCode from Customers WHERE @strPostCodesLike

However the above does not work, as I would need to use dynamic sql to get it to work. I cant use dynamic sql unfortunately.

Any help would be much appreciated

Many thanks in advance

View 2 Replies View Related

Sql Subquery

Aug 8, 2005

I am new to sql and i was reading about subquery and i think its the right tool for what i want to achieve
i have two tables
Products table, OrdersLine table
Products Table
ProdSku
ProdName
QOH
Cost
********
OrdersLine Table
OrderNum
ProdSku
Qty

I want to get the product Sku, Name, QOH, Cost and the Sum(Qty) from OrdersLine
this is what i have tried
SELECT dbo.Products.ProdSku AS Sku, dbo.OrdersLine.Qty AS Expr1
FROM dbo.Products INNER JOIN
dbo.OrdersLine ON dbo.Products.ProdSku = dbo.OrdersLine.ProdSku
WHERE (dbo.Products.ProdSku = '122345')
GROUP BY dbo.Products.ProdSku
please help!

View 9 Replies View Related

SubQuery

Mar 9, 2006

I am cofuse with subquery.HOW does subquery work. the inner or outer query exicute first. what are different type of sub query. plz give example. i am more confuse with exits subquery

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved