PLEASE HELP! Database Marked As Recovering
Mar 9, 2000
I have a 3GB DB that I was running an update script on. The sript failed and ran out of transaction log space. I expanded it and stopped and restarted SQL. The user DB is now marked as recovering. How long should I wait for it to recover? I don't want to have to restore again and start all over with my script. Please help.
(By the way this is a restored DB)
Thanks.
LC
View 1 Replies
ADVERTISEMENT
Dec 7, 2001
I canceled a restore job, and now the database is marked (Loading). When I go to propertied it tells me "database can't be opened, it's in a middle of a restore" Yet from a Query window I can connect and run queries against that database. Should I just wait until it finishes "Loading" or should I re-start the server?
Thanks
View 1 Replies
View Related
Mar 14, 2002
Hello Gurus,
After the power failure my database was marked suspect. According to my associate we will execute SQL command sp_resetstatus. My question is what are the things we have to do first before we execute the command? We are using NT 4.
thanks
Claudio
View 1 Replies
View Related
May 9, 2006
Usman Masood writes "we were using our database named db1. when suddenly it stopped working and upon checking it gave an error that db1 and db2 are marked as suspected. while we were only using db1,,,,what is the cause of this error?"
View 1 Replies
View Related
Jul 7, 2006
Hi all
I tried this command
DBCC CHECKDB (A2PD,REPAIR_ALLOW_DATA_LOSS)
The above command was not executed as there was some long rollback was going from a user...
I stopped and re started the MSSQLSERVR service...
Then i found the follwing error..
how can i work with the database A2PD marked as suspect
Server: Msg 926, Level 14, State 1, Line 1
Database 'A2PD' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Thanks
View 10 Replies
View Related
Jul 23, 2005
Hi,I restored my Windows XP system and discovered that I cannot access aMSDE DB that was saved in D: drive (I restored my primary partition inC). How can I restore it?Thanks a lot.
View 6 Replies
View Related
Apr 6, 2000
Any ideas on how long it should take SQL Server 6.5 running on a 8 Gig RAID 0 array to "recover" a 4 GIG database. I rebooted the machine this morning (seldom ever have any problems with it) and it seems to be taking an awfully long time (15 min so far). I'll let you know what happens in any case.
View 2 Replies
View Related
Mar 15, 1999
I need to recover a database, but unfortunatelly i don´t have any backup... Well, it was not my fault. Anyway, i only have the physical .DAT files of the data and log devices of the database.
Will it work if I create two devices with the same name as the old devices, create a database with the same name as the old database within these devices and then run a full script of my old database, then change the 'phy_name' on the sysdevices to point to where my old dats were, or replacing the current ones with the old ones? If not, will anything else work?
Thanks in advance.
View 2 Replies
View Related
May 3, 2004
My server crashed i had full back up my .BAK file for every database and i reinstalled a fresh verion of sql server 2000 enterprise and when i comme in enterprise manger to restor the master its telling me i need to be in single user mode what do i do.
View 2 Replies
View Related
Oct 21, 1999
Hi there,
I need urgent help regarding a database that has been
marked as suspect.
I need to get the data from the database!!
I have a copy of the structure of the database but I need to get cerain very recent data from the database.
I have tried bcp and it doesn't work.
The backup that I have won't sufice
If a database is marked as suspect, Will it recover?>
And if so how long will it take.
If it won't recover is there any other way of getting the data,
Thanks in advance,
Fin
View 4 Replies
View Related
Jan 18, 2004
Hello Friends
I had a really big Problem.
Sorry about my Englisch, came from Austria.
After a SQL Database Restore, who ends with no faults, i cannot connect to it.
In the Enterprise Manager it is marked as "in load" and in the Errorlogfile stand following.
"Bypassing Recovery für Database "WINLINE" because it is marked "in load"?
What does it mean! Please help!!
Thanks for all answers
Mike
View 2 Replies
View Related
Apr 19, 2004
Hi All,
Sql Server 7
I have database called ecatalog
i have a scheduled job which shrinks the database every day once at 12 am
today the job got failed
In the view Job history its showing the below contents
-------------------------------------------------------
Database 'ecatalog' is already open and can only have one user at a time. [SQLSTATE 42000] (Error
924) DBCC execution completed. If DBCC printed error messages, contact your system
administrator. [SQLSTATE 01000] (Message 2528). The step failed.
And in Application Log of event viewer its showing the below contents
------------------------------------------------------------------------------
The description for Event ID ( 208 ) in Source ( SQLServerAgent$ABCSQL ) cannot be found. The
local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Shrink Database
- ecatalog, 0xA0C4F8157A744244A61A4ECABE8C6056, Failed, 4/19/2004 12:00:03 AM, The job failed.
The Job was invoked by Schedule 27 (Shrink Database - ecatalog). The last step to run was step 1 (Shrink Database - ecatalog)..
I ran the job manually it worked fine
but now when i go and see the database ecatalog in my Enterprise Manager
it is showing ecatalog(Single User)
What is the meaning of this, will this make any problem to my database
Please help me in this.
Waiting for Reply
Adil
View 4 Replies
View Related
May 31, 2000
1) How do I reinstall a fresh copy of the MSDB database (since my current
one is corrupt). Is there any script available?
2) What is the purpose of the MSDB database? Backups and jobs/ Wizards?
Thanks for your help.
Ziggy
View 2 Replies
View Related
Sep 21, 2006
I am in a big trouble ,
accidently i have issued a DROP DATABASE XXX command in the sql client, thinking its a local server....... The whole 4 months of database database is now dropped.
Please help me , how can i recover the database ....
thanks in advance
View 1 Replies
View Related
Aug 2, 2007
I accidentally deleted at SQL 2005 database. Is there any way I can get it back? No, there is no backup.
View 6 Replies
View Related
Dec 2, 2000
After I restore a database with SQL the database I cannot access it. However, after restoring using Enterprise Manager I do not have the same problem. The message I get is:
Database 'les_test' cannot be opened. It is in the middle of a restore.
The code I am trying to use for the restore is:
RESTORE DATABASE les_test
FROM DISK = 'c:MSSQL7BACKUPiztrobeta_db_200012011201.BAK'
WITH NORECOVERY,
REPLACE,
MOVE 'biztrobeta_PRI' TO 'c:mssql7DATAiztrobeta_PRI.ndf',
MOVE 'biztrobeta_FGE_Dat1' TO 'c:mssql7DATAiztrobeta_FGE_Dat1.ndf',
MOVE 'biztrobeta_FGX_Idx1 ' TO 'c:mssql7DATAiztrobeta_FGX_Idx1.ndf',
MOVE 'biztrobeta_LOG' TO 'c:mssql7Dataiztrobeta_LOG.ldf'
GO
I tried changing the status in the master..sysdatabases tables, but the restored database was still not accessible. I tried to do this using the following statment:
UPDATE sysdatabases
SET STATUS = 4194316
WHERE name = 'les_test'
GO
Any help is appreciated.
Thanks,
Les
View 1 Replies
View Related
Nov 23, 1999
What should I have done? Is there anything that can be done other than restoring from backup?
How does one know if the database is really recovering or is EM just joken? I can wait 2 hours
before starting the restore
I was BCPing 12 million rows into a staging table. II used the '-b' option every 20K which I thought
would do a commit and clear the log in batches. After the process EM appeared to show the transaction log
as empty. Upon inspecting the Bcp output file I discovered the message that the BCP did not complete
because syslogs was full. I could not do a truncate transaction log or a dump database. I tried to
do a truncate transaction with no_log and it appeared to just hang. I stopped the SQL Server thinking
I could dump the transaction log, but could not start the Sql Server again. I then stopped the NT Server
because 'if all else fails'. The SQL Server started but the user database if marked as recovering.
View 5 Replies
View Related
Mar 27, 2008
We currently have a company program in foxpro which inputs all of our information into its database. We are trying to shift from this to new updated software and a SQL database. There is a program we created which converts all the data from our old database into our new SQL database in preparation for our final move to the newer software. However, some of the tables in SQL were not taken directly from our old database but rather added in directly after our initial use of SQL, so when we ran our conversion software, a couple of specific tables were wiped because there was no equivilant within our old database. We already altered our conversion program to not touch those tables again, but is there any way to do a roll back or to find a backup of specific tables?
View 4 Replies
View Related
Feb 28, 2008
I have a mirred database and have snapshot created from the mirroed database. I can do data selecting from the snapshot. But when the pricipal server is down , I can re-active the mirroed database.( I did succesfully upto this). Then I need to restore the database from snapshot and which failing with following error message.
Code Snippet
Msg 5123, Level 16, State 1, Line 3
CREATE FILE encountered operating system error 3(error not found) while attempting to open or create the physical file 'E:sql_datadevitst_mirrorlog st_mirror_log.ldf'.
Msg 5024, Level 16, State 2, Line 3
No entry found for the primary log file in sysfiles1. Could not rebuild the log.
Msg 5028, Level 16, State 2, Line 3
The system could not activate enough of the database to rebuild the log.
Msg 3013, Level 16, State 1, Line 3
RESTORE DATABASE is terminating abnormally.
View 3 Replies
View Related
Nov 17, 2007
I have the MS SQL2000 database failed to recover at computer restart. Now the database is marked suspect. How can I manage to recover the data?
Thank you.
View 5 Replies
View Related
Jan 5, 2001
while recovering it prompts a message 'the system administrator must have exclusive use of database to run the restore operation'.
now,how to do it?
how to make database to use exclusively when it is connected to an web based aplication.
thanks.
View 1 Replies
View Related
May 9, 2007
A friend of mine called and said that his database was suspect and he detached it and was unable to attach it. The SQL Server Version is 2000 with the latest service packs installed. When I checked it the database (MDF) size was 1MB and the LDF size was 3.8 GB. I was not able to attach the two together and I was not able to attach the database using sp_attach_single_file_db. I did find an old backup of his database and attached that so he can work off of it but it is 1 yr old and he needs recent data. Since the MDF seemed to be blank we cant do much with that, but there seems to be data in the LDF. Is it possible to extract any data from the LDF file?
Sunny
View 1 Replies
View Related
Oct 16, 2007
Hello,
I was coping database from my sql server 2005 to the same server but with different name. 4 steps completed successfully but the last step failed because the computer on which sql server is running turned off unexpectedly. When the server was running again, the source database was detached. I tried to attached it but sql server is reporting error 5 (system cannot access the specified file) I cannot access the file from windows explorer too. I discovered that the copy of the mdf file exists with the name of the target database but when I try to attach this new mdf file sql server reports that the file is not primary database file. Both files are the same size. What can I do? Thanks
View 8 Replies
View Related
Mar 14, 2008
Please, help
Since a few days ago we are viewing these messages, several time at a day:
3/14/2008 2:18:30 PM AppDomain 1668 (FDESK_CANCUN.dbo[runtime].1679) created.
3/14/2008 2:18:44 PM AppDomain 1668 (FDESK_CANCUN.dbo[runtime].1679) is marked for unload due to memory pressure.
3/14/2008 2:18:44 PM AppDomain 1668 (FDESK_CANCUN.dbo[runtime].1679) unloaded.
In this database only have one assemblie installed created using Vb.Net 2005, please help me how to diagnose where are the problem.
View 2 Replies
View Related
Dec 7, 2000
database : MS SQL server ver 6.50.201
problem: server startup / server time out
details
SQL server shows usage of 100 % CPU utilization, if started automatically / manually. and does not proceed / hangs up(server time out), but win nt operates extremely slow.
The background of the situation in brief is as stated below.
The errorlog was found to have the messages
warning : OPEN OBJECTS parameter may be too low.
Attempt was made to free up descriptors in localdes()
Run sp_configure to increase parameter value.
Error : 644, severity : 21, state; state 1
the non clustered leaf row entry for page 2 row 1 was not found in index page 40 indexid 2 database 'tempdb'
Error : 2620 severity 21 state 3
the offset of the row number at offset 32 does not match the entry in the offset table of the follwoing page : page pointer = 0x1395800, page no= 40, status = 0x2, objectid = 1, indexid = 2
Action taken
I used the sp_option to increase the open objects from default 500 to 1000, and the LE threshold maximum value to 400 from the default 200.
after which I used reconfigure go and restarted the computer to take the effect. The following did work fine and server was working ok. But then from yesterday I am having the problem that the MS SQL sever is utilizing the cpu to 98 - 99 % and I am not able to connect to the server.
I tried to start the server with the minimal configuration by specifying the -f option in the service manager start up options, it showed the following message
00/12/07 10:40:49.73 ods Unable to connect. The maximum number of '5' configured user connections are already connected. System Administrator can configure to a higher value with sp_configure.
00/12/07 10:40:50.02 ods Unable to connect. The maximum number of '5' configured user connections are already connected. System Administrator can configure to a higher value with sp_configure.
afterwhich I tried with the option of starting the sql server with the option -c -f
which in the event detail of the win nt shows
"mesg 18109: Recovery dbid 6 ckpt(55813,8) oldest tras= (55813,0)"
The open procedure for service "MSSQLServer" in DLL "SQLCTR60.DLL" has taken longer than the established wait time to complete. The wait time in milliseconds is shown in the data.
DB-LIBRARY error - SQL Server connection timed out.
and in the errorlog present in MSSQLLOG directory
00/12/07 15:06:43.24 spid1 Recovering Database 'master'
00/12/07 15:06:43.31 spid1 Recovery dbid 1 ckpt (7944,28) oldest tran=(7944,0)
00/12/07 15:06:43.41 spid1 1 transactions rolled forward
00/12/07 15:06:43.49 spid1 Activating disk 'AM'
00/12/07 15:06:43.49 kernel initializing virtual device 1, D:MSSQLDATAAM.DAT
00/12/07 15:06:43.50 spid1 Activating disk 'AMLOG'
00/12/07 15:06:43.50 kernel initializing virtual device 2, D:MSSQLDATAAMLOG.DAT
The dbid is / was 6 for both the instances, the database which is having this dbid is database name "AM" and is having above 1300 tables (approx)
what could be the problem and solution for it?
kindly help me out of this situation.
If any more information is needed please contact me on devendrakulkarni@yahoo.com / devendra@me.iitb.ernet.in
Regards
Devendra
View 1 Replies
View Related
Sep 23, 2007
Hi
I am in a trouble without doing any mistake. I restarted while in parallely my sql server was restarting i.e I opened a management studio.
When it booted up next time. I see that my database is gone. Though it is showed up in the server but has no node below it.
I then checked the mdf files and ldf files and found mdf file to be of 0 KB and ldf file is of 1.73 GB. My database was in full recovery mode but i did not take any database backup.
Here ais the entry from my SQL server log:
The operating system returned error 38(Reached the end of the file.) to SQL Server during a read at offset 0000000000000000 in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAHello.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
I wonder if now there is a case to recover my database..Can I restore/recover the database from .ldf file as it was in full recovery model?Any help i shighly appreciated.
View 5 Replies
View Related
Jul 16, 2001
Hi! maybe this question is very common, but i can resolve that. I have a DB marked 'loading', and nothing seems to change this state. Is any way to revert to a normal state, or the only way is destroy and re-create?
Thanks in advance
View 1 Replies
View Related
Mar 31, 2006
Hi all,
I want to know if the System.Xml.XmlTextReader is marked with Host Protection Attributes(HPA) in the SQL Server 2005 CLR. I ask this because when I add a custom class that inherits from System.Xml.XmlTextReader, I get a code access security error at runtime. I am able to register the assembly just fine. I have tested it with all the cases and pretty much sure my code breaks in this class.
My code snippet is shown below:
public class CustomXmlTextReader : XmlTextReader
{
......
......
}
Doesn't really matter what is in this class. It gives an expection even when there is no code inside.
Any help is greatly appreciated.
Thanks,
Jai
View 1 Replies
View Related
Mar 13, 2007
I have SQL Express SP1 installed on serveral machines, each has one instance and each instance has more than one database.
Recently, I found out some dbs are marked Suspect. MOM tool reported something like:
The database "your-DB" in the instance "Your-Instance" is in a critical state. The state is: Suspect.
I tried to run "DBCC CHECKDB", but it failed.
Can someone tell me what could cause the problem, and how to fix it?
Thanks,
Peter
View 2 Replies
View Related
Jul 15, 2002
Hi all,
I have a big problem with a Database on SQL-Server7.0 running on windows 2000 advanced server. The msdb database is marked suspect. I have tried a few suggestions in the SQL BOL but no luck.
Can anyone help please!
View 4 Replies
View Related
May 29, 2001
We have a new installation on Friday which was running fine. Unfortunately today, the msdb is marked suspect. Do I uninstall and reload SQL server or change the status. We only have a training data on the server presently. Does anybody has any other suggestions? Please help. Thanks for your assistance.
View 4 Replies
View Related
Jan 29, 2007
Simon writes "Hi
using the following syntax in SQL 2005 (win 2003) to restore a log to a marked transaction. Code runs ok but I'm never getting back to the point in time where id 13 still exists , help !
kind regards
Simon
/*backup and overwrite */
BACKUP DATABASE AdventureWorks
TO DISK = N'C:SQL Backupsadw.bak'
WITH FORMAT, INIT, NAME = N'AdventureWorks-Full Database Backup'
GO
/* verify data */
restore verifyonly
from disk = 'C:SQL Backupsadw.bak'
with file = 1
go
-- with MARK to place a marker in the tranny log
BEGIN TRANSACTION CandidateDelete13a
WITH MARK N'Deleting a Job Candidate';
GO
USE AdventureWorks;
GO
DELETE FROM AdventureWorks.HumanResources.JobCandidate
WHERE JobCandidateID = 13;
GO
COMMIT TRANSACTION CandidateDelete13a;
GO
BACKUP LOG AdventureWorks
TO DISK = N'C:SQL Backupsadw_log.bak'
with format, NAME = N'AdventureWorks-Trans Log Backup'
GO
/*
RESTORE DATABASE AdventureWorks FROM DISK = N'C:SQL Backupsadw.bak' WITH FILE = 1, RECOVERY, NOUNLOAD, REPLACE,STATS = 10
GO
*/
use master
RESTORE DATABASE AdventureWorks FROM DISK = N'C:SQL Backupsadw.bak' WITH FILE = 1, NORECOVERY, NOUNLOAD, REPLACE,STATS = 10
GO
use master
RESTORE LOG AdventureWorks FROM DISK = N'C:SQL Backupsadw_log.bak'
WITH recovery, STOPatMARK = 'CandidateDelete13a'
GO"
View 1 Replies
View Related
Feb 20, 2007
I've got trouble -- somehow my msdb is corrupt and is marked as "suspect". I cannot open it up or it is apparently devoid of any table, etc.
It's on my SQLExpress instance and I'm willing to blow the entire server away -- since this server has been used as a sandbox for personal use.
Can I simply re-install SQLExpress?
View 2 Replies
View Related