PROCESS A Partition.
Oct 10, 2007Hi everybody
Does anyone know where I can find code to PROCESS a Partition using DSO.
Thank a lot.
ADVERTISEMENT
Analysis :: Partition Process Error In One Of Cubes
Jun 2, 2015I am getting partition process error in one of my cubes. I don't have any clue what could be the workaround with this.
View 2 Replies View RelatedTransaction (Process ID 135) Was Deadlocked On Lock Resources With Another Process And Has Been Chosen As The Deadlock Victim.
Nov 14, 2007
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
FCB::Open: Operating System Error 32(The Process Cannot Access The File Because It Is Being Used By Another Process.) Occurred W
Dec 3, 2007Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
[Execute Process Task] Error:The Process Exit Code Was -1 While The Expected Was 0.
Mar 11, 2008Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
Execute Process Task Error - The Process Exit Code Was 1 While The Expected Was 0.
Jan 30, 2007How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
Execute Process Task - Error :The Process Exit Code Was 2 While The Expected Was 0.
Mar 20, 2008
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
Integration Services :: Dataload Process - Error Capturing Process
Aug 20, 2014I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
Transaction (Process ID 66) Was Deadlocked On Lock Resources With Another Process.
Feb 14, 2007Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
Transaction (Process ID 65) Was Deadlocked On Lock Resources With Another Process
Jan 6, 2012We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
ASPNETDB.MDF: The Process Cannot Access The File Because It Is Being Used By Another Process
Feb 17, 2007Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
Cannot Process Request Because The Process (3880) Has Exited.
Nov 15, 2007
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and
every time the process id is different. Here it is 3880.
Darek
System Process Or User Process
Dec 20, 2006select * from sysprocesses
How can I determine whether a process a system or user?
Identify A Process Which Locked Other Process
Oct 11, 2007Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
The Process Cannot Access The File It Is Being Used By Another Process.
Aug 24, 2006I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
The Process Cannot Access The File Because It Is Being Used By Another Process.
Feb 6, 2008Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
The Process Cannot Access The File Because It Is Being Used By Another Process.
Nov 23, 2006While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
A Connection Was Successfully Established With The Server, But Then An Error Occurred During The Login Process. (provider: Shared Memory Provider, Error: 0 - No Process Is On The Other End Of The Pipe.)
Apr 7, 2008i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
Help On Partition
Jul 6, 2006i have a table named table1 sitting on a a partittion scheme px.
table1 is partitioned on u_id by tens,
first partion u_id=0 to 9
second partion u_id=10 to 19
third partion u_id=20 to 29
ans so on and so forth
i have a table named table2 with
records having u_id = 13 to 16
obviously belonging to the second partion.
i want to load table2 to table1 as fast as i could with
the following requirements:
all contents of partition 2 of table1 must be deleted before loading
table2 ceases to exist after the operation
how will i do that.
thanks.
Help With Partition
May 15, 2008Hi All,
Can someone take a look at my code and tell me what i'm doing in wrong. The script runs fine but when i go to table property it says the table is not partitioned. Thanks for your help.
create database [mypartition]
go
--CREATE FILEGROUP
USE [mypartition]
GO
ALTER DATABASE mypartition ADD FILEGROUP Y2000_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2001_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2002_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2003_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2004_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2005_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2006_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2007_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2008_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2009_filegroup
--CREATE FILES
USE mypartition
GO
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2000,
FILENAME = 'F:ss_datadatadetail_2000.ndf',
SIZE = 2MB)
TO FILEGROUP Y2000_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2001,
FILENAME = 'F:ss_datadatadetail_2001.ndf',
SIZE = 2MB)
TO FILEGROUP Y2001_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2002,
FILENAME = 'F:ss_datadatamdetail_2002.ndf',
SIZE = 2MB)
TO FILEGROUP Y2002_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2003,
FILENAME = 'F:ss_datadatadetail_2003.ndf',
SIZE = 2MB)
TO FILEGROUP Y2003_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2004,
FILENAME = 'F:ss_datadatadetail_2004.ndf',
SIZE = 2MB)
TO FILEGROUP Y2004_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2005,
FILENAME = 'F:ss_datadatadetail_2005.ndf',
SIZE = 2MB)
TO FILEGROUP Y2005_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2006,
FILENAME = 'F:ss_datadatadetail_2006.ndf',
SIZE = 2MB)
TO FILEGROUP Y2006_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2007,
FILENAME = 'F:ss_datadatadetail_2007.ndf',
SIZE = 2MB)
TO FILEGROUP Y2007_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2008,
FILENAME = 'F:ss_datadatadetail_2008.ndf',
SIZE = 2MB)
TO FILEGROUP Y2008_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2009,
FILENAME = 'F:ss_datadatadetail_2009.ndf',
SIZE = 2MB)
TO FILEGROUP Y2009_filegroup;
--CREATE PARTITION FUNCTION
USE [mypartition]
GO
CREATE partition FUNCTION detail_part_function (varchar(10)) AS
RANGE LEFT FOR VALUES('2001','2002','2003','2004','2005','2006','2007','2008')
GO
--CREATE PARTITION SCHEME
USE [mypartition]
GO
CREATE PARTITION SCHEME detail_part_scheme AS
PARTITION detail_part_function TO
(Y2000_filegroup, Y2001_filegroup,Y2002_filegroup,Y2003_filegroup,Y2004_filegroup,Y2005_filegroup,Y2006_filegroup,Y2007_filegroup,Y2008_filegroup,Y2009_filegroup)
GO
-- Now just create a table that uses the particion scheme
USE [mypartition]
GO
/****** Object: Table [dbo].[partitioned_table] Script Date: 05/14/2008 09:44:21 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[partitioned_table](
[id] [int] NOT NULL,
[fiscal_year] [varchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
CONSTRAINT [PK_partitioned_table] PRIMARY KEY CLUSTERED
(
[id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON detail_part_scheme(fiscal_year)
GO
SET ANSI_PADDING OFF
Partition On Value
Feb 9, 2006I can see lot of documentation on Range Partitioning. Is there any other type of partition supported in SQL Server 2005?
For example, I have a Fact table having Billion rows. It has a column called BATCH_ID. A BATCH_ID corresponds to 10-20 Million rows and it is a running sequence number like 1,2,3 etc. (not an identity column). Is there anyway I can specify a partition function with BATCH_ID column as an int value? Will the SQL Server automatically does the partition on each int value in that case? If not, what is the best way to do it?
Thanks in advance for all help in this
Os Partition Problems
Jul 3, 2004Hi,
I recently installed MSSQL 2000 and sp3a onto a windows 2003 server in a test lab. I configured one big c: partion on this os and installed the db in the default location.
I need to detach the db's on this server and re-attach them onto another MSSQL 2000/sp3a server running 2003 os with a partition scheme like this:
c: = 20 gigs for the os
e: = 600 gigs for the data
I could not re-attach the db's onto the e:default path odatabase
Is there a work-around for this? This makes sense to me as to why it is not working and was an install oversight on my part but there has to be a way to overcome this delima?
Thanks in advance,
damnit
Table Partition
Nov 22, 2005Hi
Please help me how to do the Horizontal table partition??
I have to split the table in to multiple sub tables with same columns and less rows and then I have to use each sub table.
Thanks you in advance....
Regards
LakshmiPK
Max() Over (partition By ) Gives Error
Mar 31, 2008I keep getting this error:
Msg 156, Level 15, State 1, Line 12
Incorrect syntax near the keyword 'over'.
What am I missing? The max() over statement looks just like the statement in the documentation.
select RegistrationId,
OrderId,
Sequence,
Title,
InformalFirstName,
FirstName,
MiddleName,
Lastname,
EntryDate,
max(Sequence) over(partition by RegistrationId) as 'maxsequence'
from registration
where OrderId = '68379449583' and
Year = '2008' and
Active = 'Yes'
Alternative To PARTITION BY
May 21, 2008I have a situation where my SQL works everywhere else but my COBOL compiler complains wherever I use PARTITION BY. I can't find a workaround for that problem so I would like to remove all the PARTITION BYs. I'm not confident that I can do this accurately and would like some help getting started.
Here is my simplest example:
SELECT FESOR.REGION, FESOR.TYPE,
COUNT(*) OVER (PARTITION BY FESOR.REGION, FESOR.TYPE)
FROM FESOR, FR
where FESOR.phase = 'Ref'
and FESOR.assign is null
and FESOR.comp_date is null
and FESOR.region = FR.REGION
and FESOR.type = FR.TYPE
and FR.REP_ROW='A'
GROUP BY FESOR.REGION, FESOR.TYPE
What I'm looking for is a modified version of the SQL above which returns the same result set without using PARTITION BY.
Thanks in advance for your assistance.
Partition SQL Server
Aug 28, 2007Hi,
I am using SQL Server 2000 SP3 Version 8.00.7.60. Can I create instances of SQL server 2000 even if it's already installed?
Thanks for your help in advance!
Partition Function
Feb 25, 2008Guys,
I have names in the database which I want partition by last name - for example last names starting with A, B, C, D should go to the file group 1. last names starting with E, F, G, H should go to file group 2.
I am trying to use the following function - but do I specify in the function that last names with with A, B, C, D should go to the file group 1
CREATE PARTITION FUNCTION myRangePF3 (char(20))
AS RANGE RIGHT FOR VALUES ('EX', 'RXE', 'XR');
Is there any way to modify partition function to accomplish this?
Any suggestions and inputs would help
Thanks
Partition Table
Feb 27, 2008All,
I have a partitioned table (1.7 billion rows) that is across 97 partions. The table is partitioned on datetime field.
When I query only this table with datetime field in where clause I see that cleary it outperforms the unpartitioned table.
When this table is joined to 3 tables it performs no better than
the non-partitioned table... it seems that the query does a partition scan.
The part. table has a 3 part composite clustered index and
a NC index on the partion field value.
Would appreciate any feedback.
thanks
SUM(x) OVER (PARTITION BY Y) Supported?
Mar 7, 2008SUM(qtycolumn) OVER (PARTITION BY columnA, Column B)
is this function supported by Sql Ce?
Partition Setup For SQL 05 ??
Nov 14, 2007 HI all,
I am in the progress of migrating my 2000 install over to SQL05 and onto a couple of new boxes. I have 2 Dell 1850's to set up mirroring on and wanted to know your opinion on the best partition setup. The 1850's are a 2 disk machine so it has to be a RAID 1 setup. I am just unsure of the benefit of partitioning the logical drive to seperate the log files from the data files.
Should I partition the drive, a 300G SCSI into 2 partitions and keep the logs on one partition and the data on another? Can anyone tell me if there is a benefit to doing this?
If there is a more pratical solution can you explain?
Thanks in advance!
Jason
Sydney Australia
How Does SQL Server Know Which Partition To Look At?
Mar 27, 2007Most examples for SQL Server 2005 involve a sales table that you split based on date, i.e. sales records prior to 2000 go to this partition, and the ones after that go to another one. Nice and simple.
Say I have a sales table:
id Amount Date
1 10 1/1/1999
2 9.99 1/1/2007
Now then, I put all the records prior to 2000 in it's own partition.
So when I do something like this: SELECT * FROM Sales WHERE DATE = 1/1/1999
the SQL server will know which partition to look at. Very nice.
Now then, if I do this: SELECT * FROM Sales WHERE id = 1
How will the SQL server know which partition to look at?
Thank You!
Truncate Partition
Oct 31, 2006hi list
i have a table named stgBudgetFact, that is partitioned on DivisionID.
each DivisionID goes into its own partition, which is on its own file group.
the etl guru on the project wants to be able to truncate the partition, not do a delete from the table based on DivisionID.
Is it possible to truncate the partition somehow (remove rows where DivisionID = 3 for instance without ALTER DATABASE, where the medicine is worse than the disease) and then reestablish the partition so we can restart a failed load by division?
i really hope something like this is possible
thanks
drew
About Partition Copy
Aug 30, 2007hello,
I want to copy all or part data in one partition to another partition,how can I do?