I'm having problems getting a package that I'm trying to develop to run consistently.
This package is using and IBM OLE DB Provider for DB2 connection manager to move data from a remote DB2 for Windows source to a Native OLE DBSQL Native Client connection manger for a SQL 2005 destination.
Sometimes the package works. Sometimes it doesn't. When it doesn't, a command window briefly flashes in Visual Studio before execution "completes". There are no error messages even though the job aborts and no data is moved. The only indication of failure is that the data flow task never changes to green and the output reports that the package was "Canceled". Here's the debug output I'm getting:
Information: 0x40016041 at Integrity_Report_ABD: The package is attempting to configure from the XML file "O:JrsfilesScriptsSSISConfigDB.dtsConfig".
Information: 0x40016040 at Integrity_Report_ABD: The package is attempting to configure from SQL Server using the configuration string ""SSISConfiguration";"[dbo].[SSISConfigurations]";"DMS.EDW.EtlData";".
Information: 0x40016040 at Integrity_Report_ABD: The package is attempting to configure from SQL Server using the configuration string ""SSISConfiguration";"[dbo].[SSISConfigurations]";"FG.DCS.ABD";".
This is the first time we've tried to connect to our WinDB2 servers with SSIS. I'm thinking that I may need to move away from this type of connection and revert back to something like ODBC.
When running a package in VS you can see something like this in the output window:
SSIS package "logging.dtsx" starting. Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning. Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning. Information: 0x402090DC at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has started. Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning. Warning: 0x8020200F at Data Flow Task, Flat File Source [1]: There is a partial row at the end of the file. Information: 0x402090DE at Data Flow Task, Flat File Source [1]: The total number of data rows processed for file "C: est ssis loggingad_data1.txt" is 477. Information: 0x402090DF at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has started. Information: 0x402090E0 at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has ended. Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning. Information: 0x402090DD at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has ended. Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning. Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "DataReaderDest" (87)" wrote 0 rows. Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (1011)" wrote 1 rows. SSIS package "logging.dtsx" finished: Success.
This is exactly when I need when a package is running but I want to be able to see it without using Visual Studio. I would do it in Reporting Services but I need to find out to get the information. The SSIS logging feature in a package does not provide that kind of info.
I have an SSIS package authored in SSDT for VS 2013 that cancels itself immediately after validation completes and execution commences. This behavior occurs when executed either in VS 2013 or from within SQL Server. No error messages are thrown in either the debug window or the log output (log is capturing everything). The only thing that occurs differently on this package as compared to another package I am able to execute successfully is that a command line window briefly flashes when the package cancels itself—but it is gone so fast I cannot read it. The last several lines of the debug output are as follows:
----------------- Information: 0x40043006 at Merge Info, SSIS.Pipeline: Prepare for Execute phase is beginning. Information: 0x40043007 at Merge Info, SSIS.Pipeline: Pre-Execute phase is beginning. Information: 0x402090DC at Merge Info, All Users CSV [2]: The processing of file "C:...AllUsers.csv" has started. Information: 0x400490F4 at Merge Info, Lookup Org [47]: Lookup Org has cached 957 rows. Information: 0x400490F5 at Merge Info, Lookup Org [47]: Lookup Org has cached a total of 26719 rows.
[Code] ....
What circumstances an SSIS package would cancel itself without throwing any errors?
Exception ex.Message I am getting in debug mode calling AcquireConnection is much shorter than the logged message in run time because all the errors come to output window in debug. Is there any way to get all these errors description from exception object in debug time to be able to parse it? Thanks.
I am passing some /SET commands on the command line when I execute packages I created in SSIS and have run from the SQL Server Job manager. When I put these same /SET commands on the command line arguments section of the project properties page I would expect they would be passed into the executed package when it is run thru BIDS. But the variables still have their defined values when the packages executes.
Is there a trick to getting command line arguments to work in the debugger for SSIS/BIDS??
Maybe I'm missing something, but I can't find how to run multiple tasks in sequence while in Visual Studio debug mode. In DTS design mode I grew accustomed to right-clicking tasks one-at-a time, but in SSIS I find the additional step of having to exit Debugging mode after every task gets old after a while.
There must be a way to start execution at a certain task and have the package continue all the way to some other specified task. It would also be nice to have every task in a Group execute in sequence and stop (even if connections continue beyond the group). I could even settle for repeatedly clicking the Continue button in Debug mode, but it's always grayed out when the current task is finished!
Does anyone know why this happens? When I run one of the packages in my project (by hitting the play button in the designer), all of the other packages in that project open before it starts running?
I just had this happen twice in a row. The data flow task is showing a number of records almost twice as high as the actual data that is going into the table. This happened to me in two different DFT's with different data.
I am using an OLEDB source which uses a query something like:
select * from functiona()
In the DataFlowTask I see it had around 400,000 Rows go through the path all the way to the deastionation..
However I know that isn't right. If I do:
select count(*) from functiona() I get 200000 rows. Now the weird thing is if I check the table that it inserted to, it has the right number of rows, 200,000. (Numbers are not exact).
I use Microsof Visual Studio 2005 to write a c# aplication for my compact device (Dell Axim). I also use Sql Server Compact Edition to handle my database. Everything worked OK but suddenly I get an exception on the first call to fill command of a table in my database (Any table) This exception is happenning only when I debug the application if i run the application without debug everything is workink OK. The exception details are :
System.Data.SqlServerCe.SqlCeException was unhandled Message="Unspecified error [ sqlceqp30.dll ]" HResult=-2147467259 NativeError=25123 Source="SQL Server Compact Edition ADO.NET Data Provider" StackTrace: at System.Data.SqlServerCe.SqlCeConnection.ProcessResults() at System.Data.SqlServerCe.SqlCeConnection.Open() at System.Data.SqlServerCe.SqlCeConnection.Open() at System.Data.Common.DbDataAdapter.QuietOpen() at System.Data.Common.DbDataAdapter.FillInternal() at System.Data.Common.DbDataAdapter.Fill() at System.Data.Common.DbDataAdapter.Fill() at Ness300.NessDBDataSetTableAdapters.UsersTableAdapter.Fill() at Ness300.LoginPanel.DoLogin() at Ness300.LoginPanel.OKButton_Click() at NL300Controls.BmpButton.L300Button_MouseUp() at System.Windows.Forms.Control.OnMouseUp() at System.Windows.Forms.Control.WnProc() at System.Windows.Forms.ContainerControl.WnProc() at System.Windows.Forms.Control._InternalWnProc() at Microsoft.AGL.Forms.EVL.EnterMainLoop() at System.Windows.Forms.Application.Run() at Ness300.Program.Main()
I tried to run the application from the mobile device in order to connect to it doing "Attch to running process" from visual studio. But just running the application on the device with the resgistry value: HKEY_LOCAL_MACHINESOFTWAREMicrosoft.NETCompactFrameworkManaged DebuggerAttachEnabled set to 1 caused the crash when I set it back to 0 everything works fine. It worked for me before I do not know what happened. Is it a security problem ?
Can any one helpi me with this because this problem do not give me a way to debug my application.
Can any one please tell me how to get the complete error description for example when i dont Redirect Row for Error in OLEDB Source i get a detailed error message with column name as
[RCheck [385]] Error: There was an error with input column "CHECK_STATUS" (456) on input "OLE DB Destination Input" (398). The column status returned was: "The value could not be converted because of a potential loss of data.".
But when I set Redirect Row for error and use the Script component to log them into a Table with ErrorDescription based on ErrorColumnID it only gives me this.
The data value cannot be converted for reasons other than sign mismatch or data overflow.
This would actually be funny if I weren't under serious time constraints right now. I have an SSIS project with several script tasks in the control flow. I put breakpoints in one of them to allow me to step through and see whats going on. However, when I start the project, the IDE brings up the script editor for a different script task. The breakpoints in this task are actually on the same line numbers as the task I need to debug but the code is all wrong. I checked the task for which the code is being displayed and there are no breakpoints there.
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specifiedSource Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [OdbcException (0x80131937): ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified] System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +35 System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle) +131 System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +98 System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.Odbc.OdbcConnection.Open() +37 DBConnection.open() +12 ASP.global_asax.Session_Start(Object sender, EventArgs e) +35 System.Web.SessionState.SessionStateModule.RaiseOnStart(EventArgs e) +2163182 System.Web.SessionState.SessionStateModule.CompleteAcquireState() +154 System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +542 System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +90 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 ODBC version 3.526.1830.0strconn = "DSN=testserver;uid=tester;pwd=tester;DATABASE=Test_Database"I've Test_Database on 2 machines (same data in both machines), one is in SQL 2005 server and another one is in SQL 2000 server.When the website was published, it can't work. (with both database). But it work in debug mode in Visual Studio2005.The website can't work when use ODBC connection but it work when use SqlClient.Help me solve this problem please. T_T Thanks in advance,
I have a bat file that kicks off a master package, which kicks off about 300 child packages. My bat file is working correctly, however there seems to be issues executing packages in 64 bit mode.
So my question is...
Is there a way to specify in the bat file to execute packages in 32 bit mode and not 64 bit?
bat file: "C:Program FilesMicrosoft SQL Server110DTSBinnDTExec.exe" /f "E:MasterPackage.dtsx"
Refering to my previous post I've a package which easily run when transaction mode is Supported but when i put it to Required and All DFs are supported inside the sequence container it won't run.
Well technically it goes and pass step 1, so it goes to green but regardless of what i put in the 2nd DF it won't run. It just hangs in there. When i check the component service and check DTC, the transaction would be running but never commited.
I have done most of the things about DTC and configuration with the MS articles as this package was failing before but now it just sits at this point.
We would like to deploy SSIS packages as an ETL Tool to an appserver that does not have SQL Server 2005 installed. Is this possible, or does it HAVE to be executed on the server with SQL 2005 installed?
I have deployed a project with multiple packages to SSIS 2012 db. I am able to configure the project parameters fine. But, I am not able to replace the package variable values with the 'Environment' variables.
Durning install I selected Window's Authentication only, but now it seems we may need to use a Mixed Mode with an SA account etc... is there anyway to switch SQL 2005 to use Mixed Mode after the fact?
We have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
There is a query which when executed in the grid mode(ctrl+d) takes approx 0.02 seconds(about 21,000 rows) But when I execute in the text mode, it takes about 0.40 seconds!! Why is this difference? Also, when the records from this table are read from a VB application, they are equally slow (as in the text mode!) Why is it so slow on the text mode & relatively faster in the grid mode? Has anyone got any idea on ‘Firehose’ style cursor ?(which may speed up access of data in the VB application)
Recently I read such statments 'When SQL Server is run in "lightweight pooling" mode (fiber mode) and the DTC service is started, unexpected behavior may occur.' Can someone say anything about fibe mode?I am appreciated for it.:)
Currently, our Report Builder is running on Local Intranet mode. I'm investigating what the security implications are in changing it to Internet mode. However, I've not been able to find any documentation on this.
Does anyone know of any documentation that addresses this issue or have experience that they can share with changing Report Builder security zone from Intranet mode to Internet mode?
I have a SQL 2005 OTC. CTP version running on Windows 2003 server.
I would like to find out how the SQL server option changed to Windows Authentication mode from Mixed mode over the weekend. From the SQL log, I don't see when it changed. I would like to see Date/Time and client IP. If I can see User ID (windows) that would be great. Where I can find these info in SQL server?
(select count(*) from dto_initial_screening where (dto_initial_screening.facilityNo = ref_facility.facilityNo and dto_initial_screening.testDt between '2007-01-01' and '2008-01-01')) as 'TotalScreened',
(select count(*) from dto_initial_screening where (dto_initial_screening.testResult = 'POS' and dto_initial_screening.facilityNo = ref_facility.facilityNo and dto_initial_screening.testDt between '2007-01-01' and '2008-01-01')) as 'NoOfPositives'
from dto_initial_screening left join ref_facility on dto_initial_screening.facilityNo = ref_facility.facilityNo left join ref_region on ref_facility.adrRegionCd = ref_region.regionCd
where ('NoOfPositives') < (select Cast(paramVal as UNSIGNED) from ref_param where paramCd = 'minPositives')
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at HP.CUE.Video.PlaybackControl.UpdateProgressBar() at HP.CUE.Video.PlaybackControl._ProgressTimer_Tick(Object sender, EventArgs e) at System.Windows.Forms.Timer.OnTick(EventArgs e) at System.Windows.Forms.Timer.Callback(IntPtr hWnd, Int32 msg, IntPtr idEvent, IntPtr dwTime)
************** JIT Debugging ************** To enable just in time (JIT) debugging, the config file for this application or machine (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled.
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the machine rather than being handled by this dialog.
Hello guys! I am trying to debug a sql procedure inside Server Explorer but I can seem to step into each line. When I run the procedure it doesn't stop in the breakpoint I set.
