Package Stuck On Pre-Execute Phase Is Beginning.

Jun 8, 2007

Hi all,



I have a monster SQL query (SQL Server connection) that I'm trying to export to flat file. My package appears to just stick on the "Pre-Execute phase is beginning" stage. (I left it running overnight, and it's still going... no error message, I think it's just hung. If I include a "Top 10" in the my source query it completes without a problem. I'm wondering if it's an out-of-memory issue, but when I've run into this in the past there have been error messages generated. I've tried using both a Data Reader and an OLEDB Datasource. Does anyone have any ideas of what's going on and how I might fix it?





Thanks!!!Jess

View 6 Replies


ADVERTISEMENT

[DTS.Pipeline] Information: Pre-Execute Phase Is Beginning

Nov 28, 2007

Hi,

I have a SSIS package which pumps data from one server to other without any additional steps. There are 11 tables for which data is transferred. And this packages runs fine on two different environments but fails in one environment i.e. on SIT.

It doesn't throw any error and every time stops at the below step

[DTS.Pipeline] Information: Pre-Execute phase is beginning.

Progress: Pre-Execute - 0 percent complete
Progress: Pre-Execute - 1 percent complete
Progress: Pre-Execute - 2 percent complete
Progress: Pre-Execute - 3 percent complete
Progress: Pre-Execute - 4 percent complete
Progress: Pre-Execute - 5 percent complete
Progress: Pre-Execute - 6 percent complete
Progress: Pre-Execute - 7 percent complete


It doesn't complete neither throws an error. Any pointers on what the problem could be

Thanks

View 2 Replies View Related

DTS.Pipeline: Validation Phase Is Beginning.

Nov 19, 2007

Hi, My package hangs and the log says DTS.Pipeline: Validation phase is beginning. Any ideas why this is happennig? This same package runs fine when I run it without turning on the transaction.

View 4 Replies View Related

Data Flow Stuck In Phase The Final Commit Data Insertion Has Started

Jun 19, 2007

Hello,



I have noticed that for one of my data-flows, the process is really long during the phase "the final commit data insertion has started".

To be accurate, the process is fast until it reaches this phase. It happens often when I load millions of lines.



The extraction is done from a database SQL Server 2005 to a database SQL Server 2005, on the same server (with the SQL Server native provider).

I used a SQL Server destination but I have tried with an OLE DB destination and it is the same situation.



Why the process could be so long during this phase?

There is a way to optimised my package to avoid that?



Any idea is welcome.



Thanks.

Guillaume

View 6 Replies View Related

Pre-Execute Phase

May 23, 2006

What happens during the pre-execute phase?

Is there anything I can do to optimize it's execution?

I have a package that takes data from 2 SQL Server sources, unions them, and writes to a sql table.

The pre-execute takes 20 minutes, and the execution takes 45 seconds.

Thanks

BobP

View 5 Replies View Related

Long Duration Pre-Execute Phase

Mar 2, 2006

Does anyone know why SSIS sometimes just sits in the Pre-Execute phase of a data flow and does nothing? It doesn't matter how elaborate the data flow is or the volume of data. It can sometimes take 80% of the task's run time.

View 44 Replies View Related

Execute Phase Memory Error

Aug 3, 2005

Hi,

View 9 Replies View Related

Problem With Excel Import In Execute Phase

Jul 23, 2007

Hi All



I have a SSIS package running and tested fine on my desktop. However when I deploy the package to my server I get the error given below.



SSIS package "CR Sec Watch List 2.dtsx" starting.

Information: 0x4001100A at Transform Master Files: Starting distributed transaction for this container.

Information: 0x4004300A at Transform Master Files, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at Transform Master Files, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at Transform Master Files, DTS.Pipeline: Pre-Execute phase is beginning.

Information: 0x4004300C at Transform Master Files, DTS.Pipeline: Execute phase is beginning.

Error: 0xC0202009 at Transform Master Files, Excel Source [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.

Error: 0xC0208265 at Transform Master Files, Excel Source [1]: Failed to retrieve long data for column "NKoreaPoi".

Error: 0xC020901C at Transform Master Files, Excel Source [1]: There was an error with output "Excel Source Output" (9) on component "Excel Source" (1). The column status returned was: "DBSTATUS_UNAVAILABLE".

Error: 0xC0209029 at Transform Master Files, Excel Source [1]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output "Excel Source Output" (9)" failed because error code 0xC0209071 occurred, and the error row disposition on "component "Excel Source" (1)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.

Error: 0xC0047038 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Excel Source" (1) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

Error: 0xC0047021 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.

Error: 0xC0047039 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.

Error: 0xC0047021 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.

Information: 0x40043008 at Transform Master Files, DTS.Pipeline: Post Execute phase is beginning.

Information: 0x40043009 at Transform Master Files, DTS.Pipeline: Cleanup phase is beginning.

Information: 0x4004300B at Transform Master Files, DTS.Pipeline: "component "SQL Server Destination" (20)" wrote 0 rows.

Task failed: Transform Master Files

Information: 0x4001100C at Transform Master Files: Aborting the current distributed transaction.

Warning: 0x80019002 at Process Master Files: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (8) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

SSIS package "CR Sec Watch List 2.dtsx" finished: Success





For some reason it tells me that it not able to retrive the long data for a column. The column mentioned in the error contains special characters.



Once again, there seems to be no problem with the package as the package runs fine on my desktop.



Any help or clues as to why this is happening on my server is greatly appreciated.



Regards

Ryan

View 3 Replies View Related

Can Anyone Explain What The Pre-execute Phase Is Doing For OLE DB Data Sources Using Sql Commands?

Nov 3, 2006

I have a project which spans multiple servers and aggregates literally billions of rows of data into a much smaller and manageable result set which I store on another server. There are two stored procedures which take up 99.9% of the processing time. Each one of these SPs are estimated to run over 3 hours a piece (gives you an indication of how much data there really is). With in this SSIS package, I have two control flows, one for each SP. When I run the SSIS package from VS2005, I can see that there is a pre-execute phase which takes about an hour abnd a half to complete, and then move on to executing. My question is, what the heck is this, and what is it doing? I know it validates the sql in the procedure, but does it actually run the SP during that pre-execute phase? If it does, is there any way to get around that?

Any help would be appreciated.

View 8 Replies View Related

Data Flow With Fuzzy Lookup Freezes On Pre-execute Phase

Dec 5, 2006

I have a fuzzy lookup in a data flow but this data flow never gets pass pre-execute phase. What is the problem?



Thanks

View 2 Replies View Related

SSIS Package Gets Stuck While Executing

Dec 19, 2007

I have a package which reads from a source, does some transformation and then loads into a target table(custom transformation build to handle multiple scenarios for insert/update/delete etc). For couple of packages, I am facing an unusual problem. The package gets stuck after executing for some records. There is no data flow in the buffer. But again, if I stop executing the package and run it again, it runs through fine.
Any idea what could be issue or what particularly I should be looking for in order to debug this issue.

Thanks,
Manish

View 1 Replies View Related

Looking For A Way To Refer To A Package Variable Within Any Transact-SQL Code Included In Execute SQL Or Execute T-SQL Task

Apr 19, 2007

I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.


FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.

View 5 Replies View Related

SSIS Execute Package With Execute Out Of Process = True Causes ProductLevelToLow Error

Mar 6, 2008



Hi.

I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.

Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error


Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).

Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).

Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).

Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).

The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.

Any help would be greatly appreciated.

Thanks

Geoff.

View 7 Replies View Related

Passing A Variable Value (Package Scope) To A DTS Package Embedded Into Execute DTS 2000 Task

Jul 19, 2007

Hi friends,

I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?



Thanks

Subhash Subramanyam

View 4 Replies View Related

Passing Execute DTS Package Result (success/failure) To Calling SSIS Package

Mar 6, 2008

I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.

As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.

Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?

If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?

View 5 Replies View Related

Execute Package Task: Error 0x80070005 While Preparing To Load The Package. Access Is Denied.

Jun 8, 2007

I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.

The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.

I have the Execute Package Task configured as follows:

Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)

I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.

I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):

450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.

I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?

View 6 Replies View Related

Execute Package Task Can't Continue When The Child Package Failed?

Aug 25, 2006

I use a execute package task to run a child package in which I run some sql task.

as the error handle I insert a script task and link a line from execute package task to script task

of course the line is red,

but I found when the child package failed, the execute package task turns red,it stopped

the script task can't be run, I don't konw why?

View 9 Replies View Related

How To Compose The Connection String Of A SSIS Package That Execute Another Package?

Jul 6, 2006

Dear All,

I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?

Regards,

Strike

View 8 Replies View Related

Setting Connection String For The Package To Execute From Another Package

Jun 29, 2006

I am using execute pacakge task to execute another package . I am giving the Connection string for the package to execute. It works fine in my development machine but when i try to run in another server after i deployed it. It looks for the datasource path of the DTSX file in the same location.

how do i set the path according to each server where the dtsx file is stored. or any other method of storing it like connection string.

if i store it in theparent package variable where should i point to...

thanks

aa

View 1 Replies View Related

Package Is Not Able To Create Process To Execute Child Package.

Jul 3, 2007

Hi,
In my application, i have two package, parent package and child package. the parent package is executing child package using a Execute Package Task.
"Execute Out Of Process" property of Execute Package Task is set to TRUE. means the child package will be run in separate process not in the process of Parent package.
this was working fine, but at a particular client location. its failing the error is "not able to load child package".
for me it seems some setting on server restricting to create separate process for child package execution.
when "Execute Out Of Process" property of Execute Package Task is set to FALSE. its working fine.

can anyone help what could cause its failure with property set to TRUE.


Appreciate any help.

View 2 Replies View Related

How To Pass Parameters To A Package Using A Execute Package Task

Jan 19, 2008

Hi,

I am calling one SSIS package from another using the Execute Package Task.
I also need to pass a parameter to the called SSIS package.
Can I do this? If yes, how? If no, then what will be the work-around for this?

Thanks in advance.

View 16 Replies View Related

Schedule A SSIS Package Which Execute DTS 2000 Package

Mar 25, 2008



I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:







dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"


Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38

Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).


Any help will be greatly appreciated.

(32 bit machine, standartd edition of SQL 2005)

View 7 Replies View Related

Execute Child Package In 32 Bit Within A 64 Bit Master Package

Dec 4, 2007

Is it possible to call a package through the 'Execute package task' and force it to run in 32 bit while the master package runs in 64 bit?

View 1 Replies View Related

Execute Package Fails Due To Package Validation

May 16, 2006

There is an execute package task that calls the child package. Both parent and child packages have the same password and the passwork is entered into the execute package task. Both packages reside in the same directory path.

Error: Error 0xC0012050 while loading package file "C:Documents and SettingsuserMy DocumentsVisual Studio 2005ProjectsExecutePackageTestExecutePackageTestExtractandWrite.dtsx". Package failed validation from the ExecutePackage task. The package cannot run.

When ExtractandWrite.dtsx is executed by right-clicking on package, the package executes without any errors.

DelayValidation = True for the Execute Package Task tasks is set and DelayValidation for the connection manager is set to True.

Does anyone have any thoughts as to what might be causing this error?

Thanks in advance for your assistance.

View 1 Replies View Related

Two Phase Commit

Jun 15, 2006

How to implement two pase commit in SQL Server 2000, Is there Database Link link Oracle available here ?

View 5 Replies View Related

Execute DTS Package From ASP.NET

Aug 19, 2005

I am trying to execute a DTS package in my asp.net code, but the dts package has both a owner and user password. I want to be able to use the user password to execute the package within the code, but whenever I try that I get the following error: Access to package properties requires entry of package owner password.



Line 101: oPKG.LoadFromSQLServer("(local)", "UserName", "Password", DTSSQLServerStorageFlags.DTSSQLStgFlag_Default, "DTSPassword", , , "CopySourceTest1")
Line 102:
Line 103: For Each oStep In oPKG.Steps
Line 104: oStep.ExecuteInMainThread = True
Line 105: NextIt works fine if I execute with the owner password, it just will not work with the user password. Any ideas will be appreciatedThanks

View 8 Replies View Related

Execute DTS Package From Asp.net

Aug 27, 2005

Hi All,How we can call and Execute DTS Scripts From Asp.net.Can any one pls give me some help.RegardsVAsu

View 1 Replies View Related

Execute DTS-package From Vc++

May 9, 2001

Does anyone know if there is a way to execute a dts-package from vc++?

View 1 Replies View Related

Execute Package

Oct 25, 2000

Hello
I am a junior programmer.
I maked a package with some procedures.
How can I know the sequence of the executed procedures?
If I want to execute only some procedures in a package,
how can I do?

Thanks by Dario

View 1 Replies View Related

Execute A DTS Package From SP

Sep 27, 2002

Is it possible to execute a DTS package from within a stored procedure? If so, please include syntax or where to obtain the syntax, thanks!!!!

View 2 Replies View Related

How To Execute DTS Package From ASP

Nov 1, 2004

Hi, all.
Please, help!
I don't know how to execute DTS package from ASP application.
I need some sample code.
Thanks a lot.

View 2 Replies View Related

Execute DTS Package From .adp ?

Sep 10, 2005

Hello,Currently I save a DTS as a storage file. I then run the storage filewith VBA code in the .adp(Access Data Project). This works if you runthe ADP on the Server but the users of the .adp will be opening it onthe network from their machines. When they do it says missingcusttask.dll and some other .dll these .dll are in the SQL server Binnon the server so they are not on the users machines.I could not register the .dlls on the user machines without SQL Server.It would be great if I could solve this problem but I'm not surehow.....Another possiblity would be to save the DTS SQL Server msdb table andrun it from the server but I do not know how to run the DTS using VBAcode or a SQL statement...Please help with any documentation or suggestions,Chuck

View 3 Replies View Related

Where Does A Package Execute?

Jan 14, 2008

I want to avoid executing packages across our network's WAN, using it's bandwidth, etc. I have 2 servers that I need to execute .dtsx packages on. My idea is to have a package on Server1 that has an execute package task on with a connection to the package located on Server2. Will the execution of this package take place locally on Server2? Or would the package execution take place on Server1, using the WAN to send data back and forth?

If I'm not clear enough, I can try to expound.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved