Package Time Outs
Jun 20, 2007
Okay, we have are running our Master Package (and therefore all related Child packages) through a .bat file. The .bat file is scripted using the following logic for an entire month of daily runs:
Code Snippet
DTExec /FILE E:ETLFinancialDataMartMaster.dtsx /DECRYPT masterpwd /SET Package.Variables[ReportingDate].Value;"2/01/2007" > E:ETLErrorLogsProcessingetl_20070201log.txt
IF NOT %ERRORLEVEL%==0 GOTO ERROR%ERRORLEVEL%
mkdir E:ETLErrorLogsArchive20070201
move E:ETLErrorLogsProcessing*.txt E:ETLErrorLogsArchive20070201
DTExec /FILE E:ETLFinancialDataMartMaster.dtsx /DECRYPT masterpwd /SU /SET Package.Variables[ReportingDate].Value;"2/02/2007" > E:ETLErrorLogsProcessingetl_20070202log.txt
IF NOT %ERRORLEVEL%==0 GOTO ERROR%ERRORLEVEL%
mkdir E:ETLErrorLogsArchive20070202
move E:ETLErrorLogsProcessing*.txt E:ETLErrorLogsArchive20070202
etc...
Generally it takes about 40-45 minutes to run one days worth of data. However, we have found unpredictable instances where the job will take 3 hours or even 6 hours and appear to hang....
The weirdness sets in when we kill the job and rerun it. In all instances of a rerun, the job will execute in the normal 40-45 minute time frame. Obviously, we would like to institute some sort of logging, monitoring and error handling....including if need be a method to timeout a process and restart it.
I am reviewing the WMI (Windows Management Instrumentation) Task but I'm not entirely convinced that it's the right tool for the job.
Questions:
Has anyone else experienced the type of processing behavior that I described?
Has anyone been successful at using WMI or another process to monitor and timeout packages? If so, are there sample packages or a good tutorial that maps it out?
Unrelated to this issue, we also have instances incomplete processing logs. The logs don't finish writing and the weird part is that they all end at the same point, does anyone have experience with incomplete job logs?:
Code SnippetProgress: 2007-06-20 12:46:49.87
Source: Update factFinancial Data Flow
Cleanup: 11% complete
Thanks in advance!
View 1 Replies
ADVERTISEMENT
Jun 5, 2001
Hi, We have a SQL 7 / Win2K cluster and yesterday afternoon the users were complaining about poor performance. Their queries were timing out.. (Not all of them, just some on some large tables)
I ran just an ad-hoc query against the table from my machine and I also timed out. THen I went right to the box that had control of the cluster and did the same thing there and also timed out. Because of time constraints (and we are in testing mode) we tested a failover and everything was back to normal after that.
So now we want to try to figure out what could have been the problem. At the time I checked out the Memory and CPU usage and they were very low (0-5%) and using only 1/3 of the memory. It couldn't be a bad query or index because after the failover it worked fine.
Could there be something wrong with the specific box that had control at the time? I dont' know where to look?
Any ideas would be appreciated!
View 1 Replies
View Related
Aug 7, 2007
We have several SQL 2000 databases on one server.
One of the applications I'm responsible for has batch jobs that run for an hour; all activity is on the database. During this hour, other applications that use other databases on the same server experience time-outs. One of my coworkers did a count(*) on an empty table and it took 11 seconds.
We pay people to keep our servers up and running. Is this something they might solve by reconfiguring the server? It seems strange to me that a single database is allowed to hog all server resources.
We are meeting with them later this week, and I'd like to have some knowledge about this; we don't want to BS'ed into buying a new server.
View 2 Replies
View Related
Jul 20, 2005
Hi All.I have some rather large SQL Server 2000 databases (around 60GB).I have set up jobs to re-index the tables and update statistics everysunday. This worked will for a few months. Now after a day or two ofusing it the connections to it keep timing out. If i start the jobsmanually, all is well for two days or so.Surely there can be a better solution to this ?TIA.Ryan,.
View 2 Replies
View Related
Jul 20, 2005
The C++ application calls the database to look up property data. Onetroublesome query is a function that returns a table, finding data whichis assembled from four or five tables through a view that has a join,and then updating the resulting @table from some other tables. Thereare several queries inside the function, which are selected accordingto which parameters are supplied (house #, street, zip, or perhaps parcelnumber, or house #, street, town, city,...etc.). If a lot of parametersare provided, and the property is not in the database, then several queriesmay be attempted -- it keeps going until it runs out of queries or findssomething. Usually it takes ~1-2 sec for a hit, but maybe a minute insome failure cases, depending on the distribution of data. (~100 milproperties in the DB) Some queires operate on the assumption the input datais slightly faulty, and take relatively a long time, e.g., if WHEREZIP=@Zip fails, we try WHERE ZIP LIKE substring(@Zip,1,3)+'%'. Whileall this is going on the application may decide the DB is never going toreturn, and time out; it also seems more likely to throw an exception thelonger it has to wait. Is there a way to cause the DB function to fail ifit takes more than a certain amount of time? I could also recast it asa procedure, and check the time consumed after every query, and abandonthe search if a certain amount of time has elapsed.Thanks in advance,Jim Geissman
View 3 Replies
View Related
Dec 22, 2006
I recently installed sharepoint 3.0 on our fileserver, which has our main db using MSDE. I didn't know at the time that it would also install 2k5 embedded edition, but even if I had, I don't think it would have changed my decision.
Anyway, soon after, performance on MSDE completely tanked. Queries would execute extremely slowly, or not at all. I checked the CPU and mem usage, and all were fine. No blocked sql commands either. We ended up just killing the Sql 2k5 EE service. We're moving off MSDE eventually, but I would still like to find out why it happened, and if there's a fix or workaround.
If anyone has any ideas, I'm all ears.
View 3 Replies
View Related
Feb 18, 2004
Hi everyone! I'm new to this forum and I suspect I'll be using this forum frequently. Good stuff.
Allow this question may appear to be Web-related, I think the problem is with what I'm doing with the database. Please read.
I'm trying to implement a page tracking solution using ASP and SQL 2000. It basically writes a new record to a table every time a user visits a page on the site. It appeared to work fine at first, then I've increasingly been getting time out errors on my pages -- all pointing to the include file that fires the database write.
Here's the code that's referenced on every page:
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.Open "dsn=x;uid=y;pwd=z;"
Set objRecordset1= Server.CreateObject("ADODB.Recordset")
objRecordset1.Open "SELECT * FROM table",Conn,1,2
objRecordset1.AddNew
objRecordset1.Fi elds("PAGE") = Left(request.servervariables("SCRIPT_NAME"),100)
objReco rdset1.Fields("QUERY_STRING") = Left(request.servervariables("QUERY_STRING"),100)
objRec ordset1.Fields("DATE") = Date()
objRecordset1.Fields("TIME") = Time()
objRecordset1.Fields("PLATFORM") = Left(request.servervariables("HTTP_USER_AGENT"),100)
obj Recordset1.Fields("REFERRER") = Left(request.servervariables("HTTP_REFERER"),100)
objRec ordset1.Fields("USER_IP") = Left(request.servervariables("REMOTE_ADDR"),20)
If Request.Cookies("TEST")("ID")<>"" Then
objRecordset1.Fields("VISITOR_ID") = Request.Cookies("TEST")("ID")
End If
objRecordset1.Update
Conn.Close
Set Conn=Nothing
%>
After taking out the reference to the above code everything speeds back up. So, I know the performance hit and time out issues have to do with the code above.
Is it the simultaneous write to the table, the constant opening and closing of the recordset, the cursor type, the lock type – or combination of things?
HELP!! Thanks!
David
View 3 Replies
View Related
Nov 28, 2006
First thanks for your time.
We have 4 clustered SQL2000 Servers each contains information specific to its application related to customer information in a casino player tracking database. My problem is as follows On the Playertracking database I can join and return information from the tables there with no problems the performance accross the decently sizable transactional based table is pretty decent. The problem is I need to filter this query down by the Type of machine the customer plays. The child key exists in the playertransaction table the parent key is on another server. Here is the lay out of the tables unecessary information from the tables were truncated for brevity.
CREATE TABLE [dbo].[PlayerSession] (
[PlayerId] [int] NOT NULL ,
[Mnum] [int] NOT NULL ,
[CoinIn] [money] NOT NULL ,
[CoinOut] [money] NOT NULL ,
[Games] [int] NOT NULL ,
[Jackpot] [money] NULL ,
[Win] [money] NULL ,
[TheoWin] [money] NOT NULL ,
[PlayerMod] [tinyint] NOT NULL
) ON [PRIMARY]
-- Player Demographics information
CREATE TABLE [dbo].[Player] (
[PlayerId] [int] NOT NULL ,
[Status] [char] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[Title] [varchar] (5) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[FirstName] [varchar] (40) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[MiddleName] [varchar] (40) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[LastName] [varchar] (40) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[SSN] [varchar] (16) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
) ON [PRIMARY]
--Machine Information that links to Machine Type table
CREATE TABLE [dbo].[Machine] (
[MNum] [int] NOT NULL ,
[MachineTypeId] [smallint] NOT NULL ,
) ON [PRIMARY]
-- Machine type code table
CREATE TABLE [dbo].[MachineType] (
[MachineTypeId] [smallint] NOT NULL ,
[Denom] [int] NOT NULL ,
[Par] [decimal](6, 2) NOT NULL ,
[GameType] [varchar] (40) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
) ON [PRIMARY]
From the server where all the player information is ran I can query the linked database for the machine and machine type information like this.
SELECT m.MNum, mt.MachineTypeId, mt.GameType, mt.DisplayType
FROM ACCTV.Accounting.dbo.Machine m INNER JOIN
ACCTV.Accounting.dbo.MachineType mt ON m.MachineTypeId = mt.MachineTypeId
This is the information I am trying to get out but the query times out on me.
SELECT Player.PlayerId, Player.FirstName, Player.LastName, SUM(PlayerSession.CoinIn) AS sumCI, SUM(PlayerSession.CoinOut) AS SumCO,SUM(PlayerSession.TheoWin) AS SumTheo, AVG(PlayerSession.TheoWin) AS AvgTheo, SUM(PlayerSession.Win) AS SumWin, AVG(PlayerSession.Win) AS AvgWin, mt.GameType
FROM Player INNER JOIN
PlayerSession ON Player.PlayerId = PlayerSession.PlayerId INNER JOIN
ACCT.Accounting.dbo.Machine M ON PlayerSession.Mnum = M.MNum INNER JOIN
ACCT.Accounting.dbo.MachineType mt ON M.MachineTypeId = mt.MachineTypeId
GROUP BY Player.PlayerId, Player.FirstName, Player.LastName, mt.GameType
The other option would be some sort of SubQuery but I dont know how to return results from the subqueries to the root query to be returned to the restulting recordset. I am not necessarily looking for an answer more of looking for a direction to go to find my solution.
Thanks again for your help.
View 1 Replies
View Related
Oct 6, 2006
Hi
I am joining the thread that initially Mike started. We have a x64 bit SQL Server with 32GB RAM. On start up sqlserver.exe starts with 15 to 20MB of RAM. After that the memory gradually increases at a step of 100MB and reaches 31.8 GB at the end. We don't see a out of memory situation so far and the memory remains the same, once the sqlserver.exe reaches that level we are facing application in stability issue. There is no other application running in this server. At present the database size is 28GB and we have employed the following,
There is a database replication running
A weekly maintenance plan to reindex, backup and other maintenance is running.
There is a log back up job which runs once in 2hrs time.
The temdb size grows to 3gb max. We didn't see any temp table created left out orphan in the temdb.
We have the required indexes placed in the tables to reduce the scan time. Also the server is configured to use dynamic memory allocation that is all are factory settings.
The database is encounters on an average 200 to 500 connections at a time. One observation is the memory goes up as soon as the replication starts, this is at one of the 2 servers.
Please advise what is causing this issue and how to go abt it.
View 2 Replies
View Related
Jan 31, 2004
How can i configure DTS package elements at run time through VB6..?
Like Specifying the Source,Destination etc
View 1 Replies
View Related
Jun 21, 2007
how can i get the package execution start or end time along with DATE as a derived column into the output table.
i tryed using getdate() as expression but it gives diff time as my pkg runs in a loop.
and i see a sys variable STARTTIME which just gives time.
any help appriciated
thanks
View 1 Replies
View Related
Mar 6, 2007
Hello all, I have a SSIS package that is importing data from a DB2 database. I am using SSRS (BIDS/VS2005). I want to be able to access the last time a particular package ran in my report, like in the footer of the page. I have found the globals.executiontime for grabbing the time the report was ran.
I want to do the same thing, except I want to call the date/time the last import was made to the database. Is there some easy way to grab that from SSIS, or will I need to maybe reference the DB creation time? (The database is dropped and recreated (for now anyway) in the SSIS package.)
Thanks for your help.
View 1 Replies
View Related
Apr 10, 2007
I''m working on a data conversion process and trying to convert data from SQL Server to Oracle 10g. The problem I'm encounterin g is that when I go from SQL to Oracle with a date into a Timestamp field in Oracle, it errors out. Not because it's only Timestamp, Oracle accepts dates in that field type. I don't know why this is happening, but I'm sure someone else has run into this...thoughts?
View 1 Replies
View Related
Mar 18, 2006
Hello All,I am am having a strange problem. I am trying to execute a DTS packagefrom VB .NET (.aspx) page. The DTS package takes 21 minutes to execute.When the aspx page sends a command to MS SQL server to execute this DTSpackage it starts executing. After 8 minutes the .aspx page shows error"Cannot Find Server" and errors out with a white screen. Theinetresting thing is the DTS package is still being executed in backendand completes execution successfully.I have no clue why this is happening because there are other DTSpackages that I am executing through the same .aspx page that takesabout 3 minutes to complete execution and are working absolutely fine.By the way I have a stored procedure wrapper over every DTS package. Sowhen i have to execute a DTS package I execute a stored which inturnexecutes a DTS package.Thanks for reading my query. If you have any suggestions please let meknow.Thank you in advance.
View 1 Replies
View Related
Apr 14, 2008
Hi,
I have a DTS in SQL Server 2000, Where I am importing some data from a remote server (SQL 2000) to local server (SQL 2000).And this is working fine. it is taking max of 1 min to execute the package.
Now I have created the same DTS in sql server 2005 (SSIS) where the source server is sql server 2000 and the destination server is 2005.and I have created the ssis in that server. The same logic which i have created in sql 2000. But here it is taking almost 10 min to execute the package.
Where as the same in sql server 2000 taking max of 1 min. Why this happening.. Is there any configuration to execute the SSIS package.?
View 12 Replies
View Related
Dec 11, 2007
Dear all,
This is a beginner's question so bear with me - I have a SSIS package that builds an Analysis Services fact table - depending on user input, this table is either re-built from scratch or any additional records since it was last run are created.
Where is the best place to store the time a package was last run - in a seperate table in the database or somewhere in the fact table?
Sam
View 3 Replies
View Related
Nov 9, 2007
Dear friends,
Our package which at the time of normal execution takes 2-2:30 mins for fetching data on VPN with some select queries. But some times its job runs for hours and hours. What could be the exact reason behind it? I guess its queries are stuch somewhere, but not when we run from the BIDS or run the job manually.
Please help. Thanks.
View 6 Replies
View Related
Jul 14, 2000
I have created a DTS package. I want to know how to call/run this package from a stored procedure.
Please let me know how to call this DTS from a Stored Procedure.
Thanks.
-Rajesh
View 1 Replies
View Related
Sep 12, 2006
I have a package variable that is a datetime... how am I able to set the time of that variable? In visual studio on the variables screen if I click on value it brings up a calendar control - I can't seem to edit the time portion of the variable.
When I first click open the variables window it will say 9/1/2006 12:00:00 AM - but as soon as I click on the value box the 12:00:00 AM part will disappear and I can't edit it. I've tried on someone elses PC as well to make sure there isn't something wrong with my visual studio
Ideas?
View 4 Replies
View Related
Jan 26, 2006
I have several sequence containers in one package that fire off execute package tasks. I would like each of the sequence containers to start at the same time when the job starts running. However when I set them up to do that, i get an error that the variable cannot be read because it is locked. I have the variables setup as readonly so not sure why they are being locked. When I run the package and have each sequence container fire off after the previous one ends it runs fine.
Any ideas on how to get around this?
Thanks!
View 1 Replies
View Related
Apr 2, 2008
Hi All,
I have to create a task, and in that task i have check exection time of package and if it more then specified time, send a mail with custom message to some specific users.
or
Can i write a event which occur after specific time and send a mail?
Please help me.
Thanks in advance....
From
Manish
View 6 Replies
View Related
Dec 11, 2007
Does the validation time of DTSX package depend on the amount of data?
I have a data transfer task which contains a oledb source data from a SQL Server 2005 view. Then the data go through 3 Lookup transfromations before going into another view, also on SQL Server 2005 but a different database.
The purpose of this package is to load fact data, so it has to deal with few million of rows. Before setting DelayValidation to true, it takes few minutes just to open the package in BI Studio. Now with DelayValidation set to false, I can open the package without any problem. But it takes more than 5 minutes during Validation, Prepare for Execution and Pre-execution Phase. During the time the memory usage and cpu time on SQL Server goes up significantly. The CPU doesn't hit 100% though. My client machine doesn't have any significant activity.
I have similar packages ( Oledb view -> 3 or 4 lookup Transformations -> Oledb Table) but dealing with dimension data. With DelayValidaion set to False, those packages can be opened in BI Studio within few seconds. They also take only few seconds during those 3 phases before starting actual execution phase.
So I have an impression that the validation time depends on the amount of data in the database. Shouldn't it just depends on the metadata?
View 5 Replies
View Related
Apr 1, 2008
Hi
Can I limit an SSIS package that should run only for specific time, if it exceeds then should stop.
Ex. mySSIS.dtsx should run only 5 min, if exceeds 5 min it should stop running and exit.
Thanks,
Madhu
View 2 Replies
View Related
Sep 7, 2006
I load SSIS package using following code:
Application app = new Application();
Package pac = app.LoadFromSqlServer(packageName, serverName, null, null, null);
For simple package containing 2 tasks this code executes about 20 seconds.
If I load old version (SQL2K) package from SQL2000 then it takes 5 seconds.
Is any way to increase loading speed for SSIS packages?
View 9 Replies
View Related
Apr 19, 2006
I have SSIS Projects taking a long time to open with packages with a large number of data flows. Is there a way to turn off validation of metadata when a package opens? Turn off validation during execution on SSIS Service (after previously validated in dev)? Or be able to control when validation takes place in general?
In my one package (1 of 5) I have 43 data flows (with a single source to target mapping) in 4 sequence containers, and it takes approximately 2-3 seconds per source to target mapping and sequence container to validate which will translate to 1 ½ to 2 ½ minutes to open. When the project with all 100+ tables for the data warehouse goes through validation, I can make coffee in the time it takes to open the project. I have to delete *.suo file (or verify all packages are closed in the designer and save the project file), and when I open the project, I have to jump immediately to SSISÃ Work Offline to set it to not validate the metadata to be able to work in a timely fashion. DelayValidation=TRUE does not help much.
Running in debug mode, has an effect of causing packages that were not open and validated to go through validation though I am not running those packages. Validate once during design and run forever.
Even if I re-open a package that I just closed from designer and had gone through validation, it will go through the validation process again.
It would be great if there could be an on-demand option off the menu bar to allow one to control when validation can take place for a project, or a more granular validation option for a specific data flow or container.
View 7 Replies
View Related
Sep 12, 2007
Hi,
I want to include the running time (Start Time and End Time) of the Package in my script task that sends out an email after job completion.
How do I get the start time and end time?
thanks a lot
cherriesh
View 6 Replies
View Related
Mar 31, 2006
Hi All,
I am trying to import data from flat file to sql server 2005 DB table using SSIS. There are 4 different text files in the input folder. I am using for loop to iterate reading and importing 4 times. In order to do this I have set "Connection String" property of a connection manager to a package level variable using expression. There is a script which supplies the source file name and assigns to this variable.
The package works fine. The data gets imported successfully into the destination table. However, when I close the package, reopen it and then run, the Data Flow task fails with the error "Can not open the source file". If I enter a valid file name in the Flat File Source task and run the package it works again. As soon as I close the file/package, reopen and then run, the data flow task fails with the same error.
How do I make this working. I am planning to schedule a job which will execute the package programatically. In that case no user intevention is possible.
I would appreciate your help on this. I can provide further details if required.
-SGK
View 13 Replies
View Related
May 23, 2007
Can somebody please help answering this question?
I'm planning to consider writing a SSIS package for a new project that requires downloading large chunk of data and transform into the diverse databases such as MS SQL or Oracle depending on the Client's Datbase.
For the clients having SQL Server installed at their end, i had no issues in deploying this package on their server and run it in their licensed instance.
What should be the case for others having Oracle database? Wouldn't installing the SQL 2005 client tools install the necessary run-time services for running SSIS packages? What i understood from the MSDN library (http://msdn2.microsoft.com/en-us/library/ms403355.aspx) is that there's no run-time support available for running the SSIS packages (unlike DTS run-time support) in production environment!
Would that mean that it requires a SQL Standard edition, at minimum, (as Integration Services is OOTB from Standard Edition onwards) to be installed at the production site to run this package?
If so, the client wouldn't be ready (which is fair too) to buy the new license just to run this package. Is there any work-around/suggestions for this case?
If not, can somebody please point me to the right location where i can download the run-time support for running SSIS packages?
Any thoughts on this is highly appreciated.
Thanks for your time.
~Sagar
View 6 Replies
View Related
Jul 25, 2007
I am using SSIS to populate a star schema.
The issue is in the data flow for loading and setting the Fact table dimension keys (the dimensions are all loaded fine). After 16 rather pedestrian Lookup Transformations, I have an escalating problem adding additional Lookup transforms to the Data Flow. The problem is not in execution; the problem is adding more transforms in design mode.
Lookup # Fields in Data Flow Time to validate that lookup
<17 47 Sub-second
17 48 2 sec
18 49 4 sec
19 50 8 sec
20 51 16 sec
21 52 32 sec
22 53 64 sec
While I€™m intrigued by the mathematical progression that is forming here, the issue is that I have at least 6 more Lookups to perform. I hope you can see my dilemma.
I have gone to where it takes a little over 4 minutes each to validate the lookup transform and its associated Derived Column transform and Union transform (Total 12 Minutes). Not only does this add up to many idle minutes to each design step, BUT it breaks the debugger as it pre-validates the ENTIRE data flow before it ever switches into debugging mode.
Some notes:
1. It doesn€™t matter what order the Lookup transforms occur in, the timings are exactly the same.
2. I tried many Data Flow execution optimizations, but they don€™t improve the validation times (or even get a chance to improve the execution times!)
I realize this may be somewhat of a unique problem.
Thanks for any help you are able to lend.
-Dave
View 3 Replies
View Related
May 16, 2008
Hi,
I have a package designed as bring data tables over to SQL Server. There are 9 data flow tasks that runs parallel, to bring 9 datatables over. In BIDS, when I execute the package, it runs like 8 minutes. Or if I start the scheduled job manually, it runs around 8 minutes too. But it runs about 30 minutes at the scheduled time at midnight.
I wonder what I can do to speed up the scheduled job.
Thanks
View 13 Replies
View Related
Jul 30, 2015
I am in between of creating a dynamic SSSIS package which will run for multiple zones having different source connection.My source is in Oracle.I am having 3 DFT with the 3 different source tables.I want to create a package with above DFT dynamically so that my single package can run for the entire zone with dynamically source connection change.I have created a Master table which stores the zone source connection string and zone name. I have 2 different connection.so if in future any new zones come so only newly zone details need to be add in master table without opening the package.
View 3 Replies
View Related
Jun 6, 2006
Hi
I am trying to Execute an SSIS Package from C# Dot Net.
Below the code i am using.
try
{
Application app = new Application();
Package package = app.LoadPackage("DTSPackage/WinServeMonitoring.dtsx", null);
DTSExecResult result = package.Execute();
label1.Text = "Package Execution " + result.ToString();
}
catch (Exception exp)
{
label1.Text = exp.Message.ToString();
}
I have added reffrence for DTS Run time (using Microsoft.SqlServer.Dts.Runtime;)
But I am getting an Error like this
Error 1 'Application' is an ambiguous reference between 'System.Windows.Forms.Application' and 'Microsoft.SqlServer.Dts.Runtime.Application' C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 17 WindowsApplication1
Error 2 'Application' is an ambiguous reference between 'System.Windows.Forms.Application' and 'Microsoft.SqlServer.Dts.Runtime.Application' C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 39 WindowsApplication1
Error 3 The type 'System.Windows.Forms.Application' has no constructors defined C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 35 WindowsApplication1
Can any one Help me !
Regards
Deepu M.I
View 9 Replies
View Related
Aug 7, 2007
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
View 5 Replies
View Related
