Package Validation Error : The Package Designer Deletes The Code From Script Task.
Jun 14, 2006
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
I am learning to use SSIS for creating packages. I am getting the following error when I try to execute my package...
Package Validation Error
Error at Data Flow Task[DTS. Pipeline]:The "runtime connection "FlatFileConnection "(122)" in the connection manager collection, Connections, of component "Flat File Destination ("120") does not have a value for the ID property. Verify that the ConnectionManagerID property of the runtime connection object has been set for the component.
Error at Data Flow Task [DTS.Pipeline]: component "Flat File Destination" (120) failed validation and returned error code 0xC004801C.
Error at Data Flow Task[DTS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
I'd appreciate if someone can help me with this. Do I need to change some settings? Also, what does the number in brackets indicate, say in FlatFileConnection(122)? Is it valuable information while debugging?
Just to give an idea, my package is like this -
source FlatFile -> Derived Column -> Lookup1 ->Lookup2 ->OLE DB destination(SQL server DB table)
Lookup1 and Lookup2 have error redirected to one flat file destination each.
I have an SSIS package which calls two other SSIS packages as part of it's control flow (using the Execute Package task). Both packages are stored in the same parent folder on the same server. The first child package runs successfully, the second does not. It ran fine for days until yesterday. Not sure what I might have done. I have tried to delay validation and recreate the connection. No go. Has anyone else run into this. I am running SQL 2005 RTM and VS 2005 RTM on XP Pro SP2. Any suggestions would be welcome.
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server ExecuteOutOfProcess: True Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
Error at Data Flow Task [DTS.Pipeline]: The "runtime connection "OleDbConnection" (110)" in the connection manager collection, Connections, of "component "OLE DB Destination" (102)" does not have a value for the ID property. Verify that the ConnectionManagerID property of the runtime connection object has been set for the component.
Error at Data Flow Task [DTS.Pipeline]: component "OLE DB Destination" (102) failed validation and returned error code 0xC004801C.
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
So i have been using simple DTS packages for a few weeks with Visual Studio 2005. The only change i've made is that i've recently installed SP2 to Management Studio. Now everytime i try to run or create a DTS package i get the following error:
TITLE: Package Validation Error ------------------------------ Package Validation Error ------------------------------ ADDITIONAL INFORMATION: Error at Data Flow Task [DTS.Pipeline]: The LocaleID 127 is not installed on this system. Error at Data Flow Task [DTS.Pipeline]: "component "Excel Source" (72)" failed validation and returned validation status "VS_ISBROKEN". Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation. Error at Data Flow Task: There were errors during task validation. (Microsoft.DataTransformationServices.VsIntegration) ------------------------------ BUTTONS: OK ------------------------------
I have a package which takes a text file and imports data into a SQL table. It returns the Package Validation Error:
Error at Data Flow Task [SQL Server Destination [1430]]: Failure inserting into the read-only column "ZipCode".
The column ZipCode in the sql table is a varchar(50) column. I do not understand why it thinks the column is a read only column; if someone could shed some light on this I would greatly appreciate it.
The script component is configured to pre-compile the script, but binary code is not found. Please visit the ide in script component editor by clicking design script button to cause binary code to be generated.
Error at data flow task [dts.pipleine].one or more component failed validation
I created a new SSIS Package. I want to send an e-mail when an error occurrs.
I set the OnError event to send an e-mail. I then decided to test this so I dropped my input SQL table. When I drop the import SQL table I get a Package Validation Error and I don't get my e-mail.
Am I making a mistake. I want to always send an e-mail when an error occurrs in my SSIS package.
By the way I did add an e-mail at the end of my SSIS package to verify my SMTP is working - it did.
I have a package which has 5 connection managers. One of the Connection Manager has incorrect server name, which results in Package Validation error. Which event handler should be used to run on such errors for OnError Event handler doesnt work @ all.
I'm developing an PipelineComponent (ComponentType.Transform). When I try to execute this component, the following error is thrown:
Code Snippet =================================== Package Validation Error (Package Validation Error) =================================== Error at Data Flow Task [DTS.Pipeline]: Buffer Type 1 had a size of 0 bytes. Error at Data Flow Task [DTS.Pipeline]: The buffer manager failed to create a new buffer type. Error at Data Flow Task [DTS.Pipeline]: The Data Flow task cannot register a buffer type. The type had 50 columns and was for execution tree 0. Error at Data Flow Task [DTS.Pipeline]: The layout failed validation. Error at Data Flow Task: There were errors during task validation. (Microsoft.DataTransformationServices.VsIntegration) ------------------------------ Program Location: at Microsoft.DataTransformationServices.Project.DataTransformationsPackageDebugger.ValidateAndRunDebugger(Int32 flags, DataWarehouseProjectManager manager, IOutputWindow outputWindow, DataTransformationsProjectConfigurationOptions options) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectDebugger.LaunchDtsPackage(Int32 launchOptions, ProjectItem startupProjItem, DataTransformationsProjectConfigurationOptions options) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectDebugger.LaunchActivePackage(Int32 launchOptions) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectDebugger.LaunchDtsPackage(Int32 launchOptions, DataTransformationsProjectConfigurationOptions options) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectDebugger.Launch(Int32 launchOptions, DataTransformationsProjectConfigurationOptions options)
Can anyone help me, please? The "Integration Services Error and Message Reference" didn't help me much.
There is an execute package task that calls the child package. Both parent and child packages have the same password and the passwork is entered into the execute package task. Both packages reside in the same directory path.
Error: Error 0xC0012050 while loading package file "C:Documents and SettingsuserMy DocumentsVisual Studio 2005ProjectsExecutePackageTestExecutePackageTestExtractandWrite.dtsx". Package failed validation from the ExecutePackage task. The package cannot run.
When ExtractandWrite.dtsx is executed by right-clicking on package, the package executes without any errors.
DelayValidation = True for the Execute Package Task tasks is set and DelayValidation for the connection manager is set to True.
Does anyone have any thoughts as to what might be causing this error?
Our Visual Studio installation suddenly starting producing the error below upon trying to open any .dtsx package; although by "suddenly" I'm sure it was due to some Windows update or other program install, update, or uninstall. I've spent two days uninstalling, reinstalling, and repairing everything that is seemingly related to VS, but no luck. I've searched the forums and could not find this specific error mentioned, although I have tried some of the suggestions to fix possibly related 'class not registered' errors, but again no luck.
=================================== There was an error displaying the layout. (Microsoft Visual Studio) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=DDSErrorDeserializeDiagram&LinkId=20476 =================================== Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)) (msddsp) ------------------------------ Program Location: at MSDDS.IDdsDiagram.CreateShape(String ProgID, Boolean Visible, Int32 X, Int32 Y) at Microsoft.DataWarehouse.Controls.Interop.AxMSDDS.CreateShape(String progID, Boolean visible, Int32 x, Int32 y) at Microsoft.DataWarehouse.Design.ComponentDiagram.OnCreateShape(Object logicalObject, Int32 x, Int32 y, Boolean visible) at Microsoft.DataTransformationServices.Design.DtsComponentDiagram.OnCreateShape(Object component, Int32 x, Int32 y, Boolean visible) at Microsoft.DataWarehouse.Design.ComponentDiagram.CreateShape(Object logicalObject, Int32 x, Int32 y) at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.CreateExecutableShape(DtsContainer dtsContainer, Int32 x, Int32 y, Int32 width, Int32 height) at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.RefreshSequenceExecutables(IDTSSequence sequence) at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.AfterDeserialize()
If you try to "enable memory restriction" from the Lookup component GUI you need to input both 32 and 64 bit size of maximum memory. However when clicking "OK" on the editor you get a message like :
TITLE: Microsoft Visual Studio ------------------------------
Error at Update Execution Logs [Lookup folder path 1 [4429]]: Failed to set property "MaxMemoryUsage64" on "component "Lookup folder path 1" (4429)".
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
I am calling one SSIS package from another using the Execute Package Task. I also need to pass a parameter to the called SSIS package. Can I do this? If yes, how? If no, then what will be the work-around for this?
I'm looking for a way to refer to a package variable within any Transact-SQL code included in either an Execute SQL or Execute T-SQL task. If this can be done, I need to know the technique to use - whether it's something similar to a parameter placeholder question mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements within the Execute SQL task, so I don't think the Execute T-SQL task is even necessary for this purpose.
I have a package A which has execute package task which tryes to execute package B. I am able to execute package B directly but when i execut epackage A.Its able to open package B but its failing at the very first task in B.The error iam getting is like this Error: The task "Setup Connections" cannot run on this edition of Integration Services. It requires a higher level edition.
I'm working with 2005 SSIS and am getting the below error associated with a query when I try and set up a package that runs other package tasks. It errors in the Package Name (..) lookup after I enter what appears to be a validate location (sql server) and connection information.
I located a post suggesting to add an mmc certificate but that did not seem to help.
I'm sort of assuming that if it was id/passwd related i'd get a more specific error..
Any info would be much appreciated...Thx Owen
An OLE DB error 0x80004005 (Client unable to establish connection) occurred while enumerating packages. A SQL statement was issued and failed.
------------------------------ Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetPackageInfos(String strFolder, String serverName, String serverUserName, String serverPassword) at Microsoft.SqlServer.Dts.Tasks.ExecutePackageTask.PackageBrowser.<>c__DisplayClass1.<EditValue>b__0(String path) at Microsoft.SqlServer.Dts.Tasks.ExecutePackageTask.PackageBrowser.EditValue(ITypeDescriptorContext context, IServiceProvider provider, Object value)
===================================
An OLE DB error 0x80004005 (Client unable to establish connection) occurred while enumerating packages. A SQL statement was issued and failed.
------------------------------ Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetPackageInfos(String bstrPackageFolder, String bstrServerName, String bstrServerUserName, String bstrServerPassword) at Microsoft.SqlServer.Dts.Runtime.Application.GetPackageInfos(String strFolder, String serverName, String serverUserName, String serverPassword)
Hi All, I have strange problem. I have a package task that is setup to run a package from a file source. The package ran fine originally but VS placed a shared drive letter for the path. I went back to change it to a UNC path and now the package fails and gives an error saying the connection is not valid and that it failed validation. Going back into the connection manager to check the path and it looks good, even pressing the Browse button shows the correct directory.
We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)
I have a dataflow step (flat file -> Sql Server Destination), with a batch size of 2500 records. It fails consistently around 3.6 million records in, with only this error -
[SQL Server Destination [4076]] Error: Unable to prepare the SSIS bulk insert for data insertion. [DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SQL Server Destination" (4076) failed with error code 0xC0202071. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. [DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202071. There may be error messages posted before this with more information on why the thread has exited. [Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020. [DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled. [DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. [DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
How can I debug this further to see what's going wrong?
I had just installed SQL 2005 dev on my laptop and got an error message when I tried to create a package using the BI IDE. I received the same error using VS2005 IDE. But the project was created regardless without any packages. When I tried to create a new package in the project, I received the same error again, but with an option to view the error details.
Following is the text of the error details:
TITLE: Microsoft Visual Studio ------------------------------
HelloI am trying to execute ‘xp_cmdshell' from within a DTS package thatwas created by another person. When I try to execute that ‘SQL Task'selectively from within the package, I get the following errormessage:Error Title: Package ErrorError Details:Error Source: Microsoft OLE DB Provider for SQL ServerError Description: xpsql.cpp: Error 87 from GetProxyAccount on line604Why is this error message popping up? When I create a new package(myself) and create an exact same SQL task as above and run it, theSQL task runs fine.Appreciate any help / feedback.Thanks in AdvanceJagannathan Santhanam
I have a main package that calls several other packages using Execute Package Tasks. I also have OnPreExecute, OnPostExecute, and OnError event handlers at the package level to audit the beginning and completion of each package. I want to prevent each task from bubbling up to the package event handlers as well as prevent each task from bubbling up to the main package event handlers. I've tried setting the Propagate variable for each of the event handlers to False and setting the DisableEventHandlers property of each task to True but neither solution seems to work. Is there a way to do this that I'm missing?
I am running a package on a 64-bit server using the 32-bit dtexec. It contains an embedded Execute DTS 2000 package. I deployed the package to the server using the sa account. I set up a SQL Agent job that runs under an account that should have complete admin privileges. The network guys tell me that Legacy components have been installed (although I believe that shouldn't be necessary because SSIS is installed). This is SQL Server 2005, SP2.
When I execute this job, I receive this error message:
Executed as user: Domainuser. ...age Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:13:18 AM Error: 2007-12-17 11:13:35.65 Code: 0xC0010018 Source: Execute DTS 2000 Package Task Description: Error loading a task. The contact information for the task is "Execute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2007-12-17 11:13:35.71 Code: 0xC0010026 Source: Execute DTS 2000 Package Task Description: The task has failed to load. The contact information for this task is "Execute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". End Error Error: 2007-12-17 11:13:35.71 Code: 0xC0024. The step failed.
I just one question : How can I disable the package validation when I open it ?
When I collect the packages from the production environment, I open them on my pc and I wait 5 minutes by package while the validation are complete... It's so long because the connection point to the production and they must point to the test environment (My pc isn't connected to the network )
To make this change, I must wait 5 long minutes by package and I'm eager...
Whenever I open a saved SSIS package, validation takes over and it can take a long time to do that. Is there a way to disable the validation process when opening the SSIS package? Thanks.
