I want to access a registry entry in a package configuration but am having problems. I am looking for some example values for the "Registry Entry" field in the Package Configuration Wizard.
The test is a simple one, fill a variable with a registry value and present it in message box. I have tried a number of different values but can't seem to get the right one. Here are somethat I tried:
I'm trying to do an unattended upgrade of 2014 RTM to 2014 SP1.
It's my first attempt at an upgrade configuration file, and its failing with missing registry entry for database engine service and replication service.
Error in summary.txt is:
The registry key SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL12.MSSQLSERVER2495Setup is missing
That's a valid error, as the registry only has an entry for:
Hi, I have an SSIS Package which reads the properties values from Registry. As per the constraint of SSIS I have created the keys under HKCU in the registry and things work fine from the designer.
But, when I schedule the SSIS Package to run under SQL Agent (which is running under Local System) the values of configuration do not seem to be picked up from Registry.
How I tested was: I am picking up the server name for the Connection Manager from Registry and I set that value to an invalid servername. But, the job seems to be executing fine. Using DTEXEC it fails as expected since, this is running under my credentials.
Also, SYSTEM has full control on the new regsitry keys. Any information on this?
Quite new to SSIS am currently trying to set up a registry configuration which will hold a connection string which will enable the main SQL configurations for a package to load. I wish to put the registry entry under the HKEY_LOCAL_MACHINE directory or more precisely in a key such as below:
Have set this key up with a default value of the connection string and an associated registry configuration with the above as the value in the regsitry entry box. This configuration is listed as the first configurartion for the package to ensure it gets applied before the SQL configuration loads.
However on load or execute I get a warning of the type
A configuration entry specifies a registry key that is not available. Check the registry to ensure that the key is there.
Are there any known problems with regsitry configurations or am I just missing something obvious here ?
Hi im trying to install Sql Server 2005 but it says i need to Increment the Counter Registry Key for Setup in SQL Server 2005 before doing so. Im following the guide at http://msdn2.microsoft.com/en-us/library/ms143215.aspx but in my registry the folder HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflibdoesnt contain any keys"Last Counter"=dword:00000ed4 (5276)"LastHelp"=dword:00000ed5 (5277) or any key for that matter.How can i fix this?
Hi --I was wondering if this is a bug when I add new data in my table SSIS Confiurations and give wizard a new Configuration filter the package configuration wizard can not see the new values --the old values from the previous configuration are still showing---is there any known workaround or forced refresh I can do
thanks in advance Dave
Background:
SQL Package Configurations are most important because they provide the possibility of a central configuration store for your entire enterprise!!!!!!!! and is in my mind the only way to go
USE [ETLConfiguration] GO /****** Object: Table [dbo].[SSIS Configurations] Script Date: 05/23/2006 13:34:35 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[SSIS Configurations]( [ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL, [ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL, [PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL, [ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL ) ON [PRIMARY]
I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.
So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
Here's the deal. I have a child package, (say, pack01.dtsx), which uses a dtsconfig file for its connection string, which can be called from other packages, but which also can be called by itself.
However I also have another package (say, pack02.dtsx) which uses the same dtsconfig file for its connection string. It calls on pack01.dtsx.
When I use DTEXECUI and run pack01.dtsx, specifying the proper .dtsconfig file, it goes well. But when I try and run pack02.dtsx, an error occurs saying pack01.dtsx connection cannot be established.
How do I pass the connectionstring being used by pack02 to pack01, without having to remove the configuration file setting of pack01? Can a Parent Package configuration and a configuration file try and map to the same property?
I am creating a windows application to manage my ssis packages.
My SSIS packages use package configurations, and by default connect to the "SSIS Configurations" table in sql server.
However, I want it to connect to a view instead of this table, so i create a view "vwSSIS_Configurations" and point the package configuration to use the view in sql server.
The application SHOULD be capable of altering the package configuration's configuration and switch its connection between the default "ssis configurations" table, and the view.
Is this possible? I cannot think of a way which I can have my application switch the package configuration's connection.
I'm developing some packages in SSIS and I need to implement a configuration file to load the server's connections and other parameters, so I can use this same connection for all packages.
Have anyone a step by step to perform this configuration ?
I exported a Connection Manager to a .dtsConfig file, but I don't know how to use this config file.
Here is the scenario we are trying to use; (it a bit long winded please bare with me)
There are 2 Packages Parent and Child. Both have 2 Connection Managers (€śConfiguration€? & €śData Connection€?). The €śData Connection€? has an invalid connection set to start with this is so that we can deploy this to multiple places and use a SQL table to hold the configuration.
At runtime €śConfiguration€? is set to a valid SQL2005 database connection via the command line or in BI but €śData Connection€? is left invalid.
The Package Configuration point to an SQL server using €śConfiguration€? this has the connection string for the €śData Connection€? Connection Manager (a valid connection string). The package errors with can not acquire connection.
The first task is to put the Connection string of the Connection manager €śConfiguration€? in to a variable. Then the child package is called.
The Child package has the same 2 connections €śConfiguration€? & €śData Connection€? both are Invalid at this time.
1) We use the Package Configuration to populate a variable from the parent package which holds the €śConfiguration€? connection string.
2) We use a Package Configuration to populate then Configuration€? connection from the parent package which holds the €śConfiguration€? connection.
3) We use a Package Configuration to populate the €śData Connection€? Connection Manager using the €śConfiguration€? connection. Which should be Set via step 2 here.
The First task on the child package has a bit of script to check all the connection manager return a valid connection to make sure database are up and running before connection. This fails at the moment return in an error.
We want to use the same code in multiple environments and as such don€™t want to make code changes that are really only environment changes.
IE connection string to servers. I can€™t seem to see anything saying we are doping anything wrong but if the connections are all set to a valid connection before running this seems to work. When invalid connection are used this seems to fall over.
I have created a package configuration to read the connectionstring for the oledb connection manager. Saved the file as Environment.dtsConfig in the same directory as the other packages. Do the packages refer to the configuration file automatically? Does it make a difference if I use the dtexec to start the ssis packages since there is now a configuration file?
i am haveing package which is devloped in BIDS and i am executing the package from DotNet (Windows Application C#).during development my package is pointed to Server1,Database1.when we move the package to another test environment for a different server and database (Server2,Database2). we are giving the connection string details in dtsConfig file .but Package is not takeing the new connection string instead its takeing the old connection string (design time connection) and throwing error.what could be the problem
Hopefully a simple question. In my c# application i can call ImportConfigurationFile(<str>) to import an xml configuration file. How do i go about importing configuration settings from a SQL configuration package? I have created this but see no way to load it. I'd prefer to use the config file created in the SQL database.
I'm looking any .dtsconfig file as sample for my first package configuration. I've got ssis packages which might be updated on development and then moved to production. First of all, I'd like dynamically change the connections but I don't know exactly how to do that. I'm taking a look on the wizard but when I choose a Sql Server request me a table.
So lets say, I modify the connectionstring for the Flat File connection manager by editing the xml file. Next time, I run the package, it does not grab the new value. Am I misunderstanding the concept of Package Configuration?
I have couple of properties in my package Configuration
(1) Lets me know the Folder path - where I have file processing
(2) Connection String
When working in the Development machine, I am able to play around these values and test the application. I have tried both XML Configuration and SQL Server Configuration
But during deployment in the Test Server, the values in the Configuration are not getting reflected automatically and takes the values assigned during deployment
I tried importing the XML file and it works. But the values are not persistant.After running the package, the value gets resetted to the old value. Every time I run my package, I am reassingning my package variables.
Be it XML Configuration File or SQL Server, I would like to have the variables pulled out from the Configuration I am setting during the deployment. the values should be persistant and should refer the updated values.
Hi, I'm facing a problem that I'm trying to solve. I report it in the following hoping somone can help me!
the context:
- I have a solution containing almost 20 packages - I have a main package containing the sequences (Sequence Container) calling all others packages (Execute Package Task) - every package has the connections to its own DBsource ; so the package X has the its own connections to DBsourceA and DBsourceB, the package Y has the its own connections to DBsourceB, DBsourceC, DBsourceD and the destination DB is unique for all the packages.
My problem is: I have the necessity to define in the best way a config (one for all the dtsx, possibly) that allow me to manage easily the switch from the developing env to the deployment env, basically for the DB connections.
Which is the best way to do this and can anyone tell me the steps to follow?
I've been searching for an answer to my question quite some time now and I've not been able to figure it out yet.
Situation: - I've created a SSIS package containing a bulk insert task. - I've added a package configuration containing the appropriate connection manager (i.e. dev, beta or live) - CreateDeploymentUtility = true - I've copied the deployment folder to our beta server and I started the manifest file to install the package to the sql 2005 server, after that I specified the config file location and changed the value so the approriate connection manager is used. - When I execute the package from the sql server the package doesn't read the value from the xml config file, it uses the connection which was originally specified in the package, whereas when I run the package from my BIDS it is reading the value from the xml config file?
I can't seem to figure out why this is happening? am I missing something here?
I'm facing a little problem concerning package configuration that is using a SQL table.
I have 4 exactly the same Db's on the same SQL server, each with another name of course (Dbipa, DbIpB, DbIpC & DbIpD).
My developers created 4 exactly the same SSIS packages with 4 exactly the same jobs, each for his own DB only the connection settings are different.
Now I was trying to manage this with only one SSIS package by using an SSIS Package configuration table in each DB.
I thought it would be possible to start the package with the following parameter
/SET Package.Connections[SQL].InitialCatalog;DBIPA OR
/SET Package.Connections[SQL].InitialCatalog;DBIPB OR
/SET Package.Connections[SQL].InitialCatalog;DBIPC OR
/SET Package.Connections[SQL].InitialCatalog;DBIPD But this doesn't work because before he changes the initial catalog in the connection named SQL, he already did the loading of the SSIS_Configuration table. So he point always to the same config table. Is there a way to change the connection before the package configuration is being executed. Ludo Bernaerts
1) We are doing data migration from SQL Server 2000 OLTP design to SQL Server 2005 OLAP design.
2) We have used SSIS packages and data flow tasks in which we mentioned connection strings for source and target containers.
3) We have a master execute package which contains series of execute packages in relational order.
4) When we execute this master package, we should be able to dynamically specify different source and connection strings for all packages.
5) In master execute package, we generate an XML configuration file using SSIS -> Package Configurations... using Connection Managers -> Particular connection
6) Now, we change connection string to point to another database after adding this new OLE DB connection in Connection Manager of each and every package.
7) When we save, build and execute master package it is still executing migration packages against the old database. Please let me know what I am missing.
I have a package that executes succesfully before package is configured.
but when package is configured to use configuration details either from SQL Server configuration table or XML configuration file, gives an error :
[Connection manager "XYZ"] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Can anyone help me out with this ?
Experts !!! this is my second post, my previous post is still unanswered.
I am new to SSIS. I have an SSIS package which we are storing it in the application server ( not in SQL Server ). We are storing the database name etc.. in package configuration. Where should I store the configuration file? In app server or in the database server. Also please tell how to execute the package stored as file system.
Am I missing something, I can't find any way to specific the XML configuration file when I try and run my package in Debug of BIDS. My OLE DB connections are all failing due to a lack of a password. I can set the password in BIDS but its forgotten as soon as I start Debug or build the solution. The only way I seem to be able to run my package (now that I have enabled configurations) is to de-select the enable configurations box.
I've tried putting a configuartion file in the Deployment folder, the bin folder and the project root folder all to the same result.
When I try the option to store package configuration into a SQL Server table, it keeps asking me for a filter and I dont' see any options on the drop down list. How do I set this up? I know how to set the package configuration in an XML file and that worked pretty OK for me. But there is now a need to store the package configuration in a SQL Server table now. Please help me with this problem.
I have a package that executes succesfully before package is configured.
but when package is configured to use configuration details either from SQL Server configuration table or XML configuration file, gives an error :
Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
I am using Hit Software OLEDB provider for DB2/400 Connection
