I have a DTS Package that is used to dispatch mails to all the customers. When I execute the package manually by selecting it and then clicking Execute Package from the context menu, it executes to completion successfully. But when I schedule to execute it using Job, then I get the following error message:
... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_2 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_2 DTSRun OnStart: DTSStep_DTSActiveScriptTask_1 DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_3 DTSRun OnError: DTSStep_DTSExecuteSQLTask_3, Error = -2147220421 (8004043B) Error string: The task reported failure on execution. Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 1100 Error Detail Records: Error: -2147220421 (8004043B); Provider Error: 0 (0) Error string: The task reported failure on execution. Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 1100 Error: -2147467262 (80004002); Provider Error: 0 (0) Error string: No such interface supported Error source: Microsoft OLE DB Provider for SQL Serv... Process Exit Code 1. The step failed.
FYI: This Package is under machine7. When I copy the package to my system (machine3) and execute it using Job, it succeeds :rolleyes:
event handlers was not executed when my package get fails it will go to directly to on error...not executing on preexecute. but it was working fine previously...i haven't change anything i have run it again...got this issue...
I have a very anoying problem with SSIS. I've done new packages into same project, almost identical compared to old ones. They work well in visual studio, but I can't execute them using procedure. Old packages works just fine, but none of the new. Error message is in the end of my story.Visual Studio version is 9.0.30729.1 and SQL Server version is 10.0.4000.0. Is it possible, that these not not updated versions could cause this problem?Package ProtectionLevel is DonSaveSensitive.
Error messages, when package is executed by procedure: Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. NULL Started: 10:36:48 AM Error: 2015-03-31 10:36:48.48 Code: 0xC0016016
I created DTS a while ago and placed in job to run once a day (it worked fine for 3 months) 2 days ago I changed sa password and now job fails with error (Login failed for user 'sa'.), but it run fine from DTS !!!
1. My DTS created with domain Account DomainSVCSQL2000( sa rights and local admin) 2. SVCSQL service use DomainSVCSQL2000 to run 3. SVCSQL agent use DomainSVCSQL2000 to run 4. DTS use 'osql -E
Where should look for reference to sa ?
Executed as user: MONTREALsvcsql2000. DTSRun: Loading... Error: -2147217843 (80040E4D); Provider Error: 18456 (4818) Error string: Login failed for user 'sa'. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0. Process Exit Code 1. The step failed.
I have a SQL 2000 DTS package which executes without errors when run from the DTS design screen or by right clicking the package and selecting execute. When I schedule the package and get it to run at a certain time or highlight the job and select start, the package comes back with an error saying there was a problem with a transformation. I have tried scheduling the DTS by right clicking on it and selecting schedule and creating a new job and using DTSRun with an operating system command. I get the same results! Help!
I'd like to know if there's a way to pass parent package parameters to a package executed by SQL Server Job Agent? It appears that sp_start_job doesn't have any variable that could accomodate this.
I have created a SSIS package with a Foreach Loop including a Data Flow Task, which in turn include a Row Count component which pass the row count value to variable with package scope. The variable is used in an Execute SQL Task following the Data Flow Task.
The package executes successfully when executed on its own, but when executed as a child from a parent package (which only include an Execute Package Task) the variable from the Foreach Loop becomes NULL.
There are a lot of other variables in the package receiving values dynamically without any problem, the row count variable however is the only variable in the package that receives a value as part of a Data Flow (and used in following tasks within the Foreach Loop).
Why does the variable become Null? For your information, I am using a variable with package scope and no variables from the parent package are used or passed from the child package to the parent package.
(For your information, we are running the 64 bit version)
I have a simple SSIS package that reads a flat file and copies it into a SQL Server table.
When the flat fiel is on the C drive I have no problem runnign this package from SQL Server Agent, but as soon as I update the path to a network location the package only works when I run it manually, but fails when is executed via the SQL Server agent job.
The error says "cannot open the datafile", while the datafile location is valid.
Is this a kind of limitation of a SQL Server Agent that only local files are allowed to be processed?
I did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.
Configuration:
SQL Server Agent on a 32Bit server.
The ODBC connection configuration in available on System DSN on this server.
The user of Server Agent have full access (Admin).
Connect Manager Provider: ".Net ProvidersOdbc Data Provider"
SQL Server version: 9.0.3042
Error Message:
Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.
I created a .bat file with this instruction and It's run well:
I am a newby to SSIS and it has been around 2 weeks since I have started with SSIS in my project.
Now, I have been able to successfully build the SSIS package for my project need which is to export all the data from excel source file to the destination database tables after certain validations and modifications. So, when I run the package from the Visual Studio, it runs fine, but actually we have to call the SSIS package from the Webpage through ASP.NET. I have used following code, for loading and executing the package on the page load event.
// Load package from file system Package package = app.LoadPackage("C:\Monitor 3\EEObjectImportSSISPackage\ImportCustomPointObject.dtsx", null);
Variables vars = package.Variables; vars["selectedArea"].Value = 1050;
DTSExecResult result = package.Execute(null, vars, null, null, null); }
All the connections and the log details are configured in the package itself. I am not much expert on the how to configure the package properly, as this is my first hands on effort at SSIS.
Unfortunately, I am not able to execute the package from the above piece of code. I have tried referring to various blogs, but none could come to my rescue. On the page load, it generates the log which notes below errors.
OnError,PRODSK0418,PRODSK0418ASPNET,Filling table from Excel file after validation,{81E15B75-B9B8-48EB-9B46-936C240EF9E0},{A0D5ECDF-E6CA-41AD-A9A5-1FF66E027FA1},12/13/2007 4:20:48 PM,12/13/2007 4:20:48 PM,-1071611876,0x,SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
OnError,PRODSK0418,PRODSK0418ASPNET,Filling table from Excel file after validation,{81E15B75-B9B8-48EB-9B46-936C240EF9E0},{A0D5ECDF-E6CA-41AD-A9A5-1FF66E027FA1},12/13/2007 4:20:48 PM,12/13/2007 4:20:48 PM,-1073450985,0x,component "Excel Source for CustomPoint object" (1) failed validation and returned error code 0xC020801C.
OnError,PRODSK0418,PRODSK0418ASPNET,Filling table from Excel file after validation,{81E15B75-B9B8-48EB-9B46-936C240EF9E0},{A0D5ECDF-E6CA-41AD-A9A5-1FF66E027FA1},12/13/2007 4:20:48 PM,12/13/2007 4:20:48 PM,-1073450996,0x,One or more component failed validation.
OnError,PRODSK0418,PRODSK0418ASPNET,Filling table from Excel file after validation,{81E15B75-B9B8-48EB-9B46-936C240EF9E0},{A0D5ECDF-E6CA-41AD-A9A5-1FF66E027FA1},12/13/2007 4:20:48 PM,12/13/2007 4:20:48 PM,-1073594105,0x,There were errors during task validation.
Can any one please give me your expert advice on this matter and help me in solving the problem? I am in real need to get this solved.
Hope to get your quick reply n this matter. Please feel free to let me know in case of any questions in this matter.
I am executing a package programmatically from ASP.NET using C#. The package is being loaded from SQL Server at runtime and then it is executed from a custom class written in C#.
Problem:
When a task fails, I'd like information on why it failed. I read about implemeting the IDTSEvents interface as a way to have my package call back to code. This works fine (I have code in the OnTaskFailed event handler), but I'm not sure how to find out why a task failed. Since my task is loading a flat file to SQL Server, failure will likely come in one of two flavors: either the file format will be wrong or the data will violate a database constraint. In etiher case, I'd like that feedback. I am looking that the TaskHost object that gets passed to my event handler and I haven't figured out how to access this information. Am I going about this the right way? If yes, how do I access the error information I am looking for?
I am having the same problems as those in another post. SSIS package works fine when executed in BIDS and through execute package utility but it doesnt work when executed as a step in a job.
The other problem is that the logging also doesnt work when i try executing it as a job. So I have no clue about what to do without knowing what error it is. When I run the job it simply says the step has failed.
I have tried most of the solutions posted in other websites most of them to do with using proxies with credentials but havent hit a solution. I would love to get any input on what to do.
There is an execute package task that calls the child package. Both parent and child packages have the same password and the passwork is entered into the execute package task. Both packages reside in the same directory path.
Error: Error 0xC0012050 while loading package file "C:Documents and SettingsuserMy DocumentsVisual Studio 2005ProjectsExecutePackageTestExecutePackageTestExtractandWrite.dtsx". Package failed validation from the ExecutePackage task. The package cannot run.
When ExtractandWrite.dtsx is executed by right-clicking on package, the package executes without any errors.
DelayValidation = True for the Execute Package Task tasks is set and DelayValidation for the connection manager is set to True.
Does anyone have any thoughts as to what might be causing this error?
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results. Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
i have an SSIS package that exports to an excel file. This works fine. the problem is that it appends the data instead of overwriting the file. Is there any way to overwrite the file like you can with a flat file? I have to email the file everyweek and don't want to have to clear it out manually. Any help would be appreciated
I set up a DTS package to run every night on my SQL 7 Server. It is supposed to write a text file of modified rows every night. It was working fine until I changed the password for sa, now it fails. Also in Enterprise Manager, when I try to look a the package properties, I get a "login failed for user sa" package error.
I have stored procedure that uses the xp_cmdshell procedure to use the dts run to run some dts packages. This package exports data into an Access 97 database. When I run it I get this error: Error: -2147467259 (80004005); Provider Error: -533791822 (E02EFBB2)
Error string: Could not update; currently locked by user '(unknown)' on machine ''.
Error source: Microsoft JET Database Engine
Help file:
Help context: 5003218
If I right click on the local package and select execute it runs with no problem. Any ideas what is going on?
I have a DTS package set up to push data out to several sites. When I execute the package it runs perfectly. When I schedule it as a job it fails. I checked the proxy account in the SQLAGent properties and there is a check mark there. But the job still fails.
I'm trying to run a job which moves data from one machine to another. I can manually execute the package successfully, but the job always fails. I get the dreaded error message 18456, "login failis for user "". I have double checked the logins for both machines,(sql server agent AND the sql server authentication). Also, I can run a select statement (from server_ to server_2) successfully from query analyzer i.e.
Select * from <linked_server_name>.<database>.<database_owner>.<table_name>
however, if I run this query from server_2 to server_1 I get the failed login message similar to the error message found in the job history. Since both servers accept nt logins, where is my problem? They are both set up as linked servers, and they are both mssql oledb. Any suggestions will be appreciated! thanks
SQL Server is running on my PC. The server name is 'ASPEN'. When I create a DTS package to export a local database to our live site, I must use 'LOCAL' for the server name, not 'ASPEN'. Everything runs fine the first time, but later, when I try to execute, or even view, the local package I saved, I get the following error: [DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access denied.
I have a DTS package which when I execute it manually, it executes perfectly. I need to schedule it and therefore had to use the scheduler which would creata a job for the package. The problem is that job. It does not execute; it fails every time. The error message is: Sql server does not exist or access is denied.
I have tried to trouble-shoot by setting up an alias for the server in the client network utility for sql server. I also create a new dsn with the new alias. It still failed with the same error message. I edited the properties of the dts package to connect to the server's ip instead of it's alias or logical name. Still fails.
There is a DTS package that fails to run for one user. The DTS runs for other users. The DTS even runs when the user signs onto another Server.
The error message that the user gets is the following:
The number of failing rows exceeds the maximum specified. TransformCopy 'DTSTransformation_1' conversion error: Conversion invalid for datatypes on column pair 1 (source column 'F1' (DBTYPE_WSTR), destination column 'PostDt'(DBTYPE_DBTIMESTAMP))
As previously stated, if the user signs onto another Server with SQL Server on it, the DTS performs a successful transformation.
Has anyone seen this error. I've been looking over all roles and security and have not been able to find any differences between user setup.
I have an SSIS package that runs just fine in BI but when I go to run it as a job I get this error message:
SQL Server Scheduled Job Status: Failed - Invoked on: 2008-01-25 12:23:08 - Message: The job failed. The Job was invoked by User. The last step to run was step 1 (Step 1).
I have created a credential with domain admin rights and a proxy that uses the credential. The domain admin account is a member of the SQLServer2005SQLAgentUser group. The package protection level is set to EncryptSensitiveWithKey.
Hi,A DTS package which is running fine when execute ,always fails asscheduled job.I read from the previous posts about MS KB article 269074, securityand MDAC, but I don't understand and don't know how to solve it.Please help.My scenerio:SERVER : MS Windows 2000 server is in a PRODUCT DOMAINMS SQL SERVER 7.0 SP2- Agent started up by SYSTEM ACCOUNT andConnection as NT AuthenticationWORKSTATION (Enterprise Manager as Tool to connect MS SQL SERVER andwrite and schedule DTS Package): MS Windows XP connect as NT Authenticationbut in WORKGROUP DOMAINBest RegardsNipon Wongtrakul
Like the name says, I'm trying hard, but I'm obviously missing something. Okay, I'm new to SSIS. I'm trying to write a job that deletes some Excel files on the server, copies some Excel files from a Sharepoint instance to the location where the deleted files were, runs an executable to manipulate those files, and then imports them to my SS instance.
the package runs fine when I run it from Managment Studio after installing it on the server. The 'execute task' fails when I run the job containing the package. After creating a proxy to have the SQL Server agent Service run with appropriate permissions, I thought I would have been rid of permissions issues (I gave the proxy way too much permission in an effort to narrow in on my issue), but I could still be missing something.
The job doesn't get into the package enough to even start writing to my log file, and all I get in the job history is the very cryptic 'DTExec: The package execution returned DTSER_FAILURE (1) ' error. If anyone has ideas, I would greatly appreciate being shown the error of my ways.
I have a large number of SSIS packages, which I have developed over the last few months.
Having written and tested them locally, running in VS05 etc - I have moved them to a server, stored in the MSDB database.
I am having real troubles with packages that move tables from one database to another.
I am working on a migration project, so I have several packages that move tables from the source database, into my staging database.
One package which will not run at all, basically just moves 15 tables from database A on my server to database B.
The package is essentially a few SQL tasks to create tables, then a data flow.
The data flow contains the table movements as an OLE DB source to an OLE DB destination. No intermediate processing.
In an attempt to get some meaningful logs of the reasons for failre I ran the package from the commandline with the output piped to a text file. That text file contained the following error:
Error: 2006-11-20 11:48:47.78 Code: 0xC0202009 Source: Data Flow Task Source - tblParking [1641] Description: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe. ". End Error Error: 2006-11-20 11:48:47.78 Code: 0xC0047038 Source: Data Flow Task DTS.Pipeline Description: The PrimeOutput method on component "Source - tblParking" (1641) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. End Error Error: 2006-11-20 11:48:47.84 Code: 0xC0047021 Source: Data Flow Task DTS.Pipeline Description: Thread "SourceThread1" has exited with error code 0xC0047038. End Error
I've googled for most of the error messages there, and tried applying some of the things I found.
I've set the commit size on the OLE DB destination to 10k rows.
I've set the number of engine threads to 2.
The SQL Agent service is started by a domain user that has sufficient server and database roles to do what it needs - other packages run fine.
I'm really stumped here now - this package will run perfectly in visual studio, but fails when ran as a scheduled task, and I'd really appreciate any advice or pointers
First package I execute SQL (select top 10 * from MyTable) in my SQLServer2005 database. I scheduled it and it ran sucessfully. I changed the execute SQL to run against an external Oracle database. (Select * from SomeOracleTable where rownum <= 10). I preview to make sure the query works and it does return a result set. I execute the package in the Visual Studios IDE and it works. I save with encryptAllWithPassword to the SQL server. I go into the scheduler and select the package from SQL Server (as opposed to the file system). I set the step to execute the package off the server. I enter the security key by clicking on the configuration tab. I assume it saves the password to the package. I click OK, and schedule it for one time execution. It fails.
I created a package for importing data from a flat file to an existing table in SQL Server 2005 using Management Studio and the administrator account working directly on the server through a remote login. I saved the package to MSDB.
I can see the package listed when I connect to Integration Services through Management Studio and expand the MSDB folder. In that location I have the option to run the package and it will run successfully. However, I cannot edit the package.
When I try to create a scheduled job using Sql Server Agent, where the first step is to run the package using the administrator login, the execution fails, and the job history will only tell me that the step failed. The Sql Server Agent log shows that the job started and completed. No error is shown. The Administrative Tools Event Viewer Application log shows only that the job started and failed. Security log shows no errors. System log shows no errors.
What am I doing wrong? How can I edit and schedule this package?
Background: I have a package that reads data from an SAP table and populates a SQL table. The package was developed using a custom source component I created to connect to SAP. The package runs with no errors in the Business Intelligence Development Studio. I deployed the package to my test SSIS server successfully using a package password. The Run Package option runs the package with no errors.
Problem: I created a Job under the SQL Server Agent and configured a single Step to execute my package. This fails with the following error:
Code: 0xC0047062 Description: System.InvalidCastException: Unable to cast object of type ... Description: component "SAP DB Source" (281) failed validation
The cast is fine as far as I can tell, so I'm not sure why this error occurs. I found other reports of this strange error message, but no solution. Any help is greatly appreciated!
I have a Local DTS Package which will execute fine...no problems. When I try to schedule it from my NT 4.0 Workstation to the NT 4.0 Server, I get the job scheduling dialog box...fill it out...click OK...and NOTHING.
No error message, nothing in the SQL error log, nothing in the NT logs, no job in the schedule! When I perform the same task at the server logged in as Administrator it schedules successfully.
I am trying to configure emails alerts on DTS package on one of my servers , i am getting an error somthing like i need to add a new profile.I received emails every day from the scheduled jobs which succeed every day
I have a SQL DTS package that imports a text file as one wide column into a two column SQL table, one is an identity seed. So essentially I import then parse the data using the index key as it is 3 seperate lines of data. All works fine by running the DTS package using execute. When I schedule this as a job it fails. It indicates that I have additional white space after a column. Any thoughts on why this can ocurr?
Hi, I created a SSIS Package and now i want to run this package from SQL Agent Job. I set up the job and when i run it, it failed
Job Properties: Type: SQL Server Integration Services Package Run As: SQL Agnet Service Account Package Source: File System Package: \pc17917c$Documents and Settingskdesai1DesktopSSISTest1Test1Package.dtsx
Error i got when i execute the job.
Description: Fauiled to decrypt protected XML node "PassWord" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:54.48 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:55.07 Code: 0xC0048006 Source: Drop Table ActiveX Script Task ... The package execution fa... The step failed.
I'm new to the SQL 2005 SSIS. Can you please help resolve this problem?
