Package From Package Sore Does Not Work As Job
Jun 1, 2006
Dear All,
I try to run a Package which is placed in the Package Store via a job - but this does not work.
Some things about the package:
- The package evokes some warnings, because I do not use all columns from the datasource
- Package runs in BI Studio - log is written
- Package runs if startet from the Package Store - log is written
- Package Execution stopps immediately if started via job - without writting in the log
As hint - needless to say :-) - that the log provider is configured in all three spaces...
Does anybody now, if I could use the configured log provider from the package directly in the jobs _without_ doing the settings?
Other jobs - without the warnings - are running and placing there step results in the log.
Thanks in advice!
Cheers
Markus
View 3 Replies
ADVERTISEMENT
Nov 4, 2006
Hi,
I am new to SSIS. I followed the direction of the tutorial Creating Simple ETL Tutorial package in BooksOnline. I have tried more than five times and have done exactly as suggested in the tutorial but it does not work.
The URL is:
http://msdn2.microsoft.com/en-us/library/ms169917.aspx
I get these warnings and finally fails:
1)[Lookup [30]] Error: Row yielded no match during lookup.
2) [Lookup [30]] Error: The "component "Lookup" (30)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (32)" specifies failure on error. An error occurred on the specified object of the specified component.
3) [DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (30) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
4) [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
Can someone help me with this tutorial error? or Am I doing something wrong.
Thank you,
View 6 Replies
View Related
Jan 3, 2007
I'm an IT developer with an experience of 4+ yrs and mainly working in VB, ASP and in SQL SERVER.
Now i got an offer to work only with SQL SERVER DTS packages ? Is it really works well for my career ? My profile in the new offer will be like...have to conver the vb application into sql dts service.
Please suggest me ! Thanks in advace.
View 2 Replies
View Related
Jun 28, 2001
I have a package that import data from one DB to another DB.
The package work fine but the scheduled job give me this error:
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: Transfer SQL Server Objects DTSRun OnError: Transfer SQL Server Objects, Error = -2147024893 (80070003) Error string: Error source: Help file: Help context: 0 Error Detail Records: DTSRun OnFinish: Transfer SQL Server Objects DTSRun: Package execution complete. Process Exit Code 1. The step failed.
Any idea?
View 1 Replies
View Related
Nov 14, 2006
Good morning....
I work with many packages in 3 environments...development, homologation and production.
I had in each enviroment the table WCOT_Config with your configurations for this enviroment. There's a connection called Config wich have a expression
ServerName = System::MachineName to pickup the right server for each enviroment.
My package catches the configuration that is in the machine which the expression of the Config points. This
was functioning perfectly, but now my new packages that i place in the
production server are importing for the development server.
Suddenly the configuration stopped to function, but only for the new packages.
I have to check anything else for the package uses the configuration ?
Sorry my poor english ! heeheh
Thanks to everybody
View 1 Replies
View Related
Mar 3, 2008
I have an SSIS package that has this logic:
Map drive(batch file)
For each file (csv) loop
Pump file data into sql server
Move file to "archive" directory(file system task)
Delete File (file system task)
End Loop
Unmap Drive (batch file)
The Map/unmap code is in a batch file
c:windowssystem32et use \10.10.10.10ShareName MyPassword /USER:MyUserName /YES
Unmap:
c:windowssystem32et use \10.10.10.10ShareName /DELETE /YES
Here are the results when running this package:
1. Running in BIDS on separate workstation. Everything OK.
2. Running on Server by right clicking on package in Integration Services (SSMS) and choosing "run". Everything OK
3. Running as job with SQL Agent: Package succeeds but no action was taken on the files, files in "ShareName" still there, so therefore no data pumped into SQL Server.
Now, the difference is the SQL Agent jobs are running using a domain account proxy. I'm not sure how that would affect things though--I have the tasks in the package set to fail the package if they fail, so they are not failing, the drives are being mapped o.k.
The computer with the share is non-domain, but that shouldn't matter--I am specifiying the local username and password in the batch file as you can see, and as you can see it works from the workstation in BIDS on a separate machine, and works on the server too as long as I don't run it as a job. The batch file sits on both the server and the local workstation with the same local path.
Any idea why the files aren't actioned when run as a job?
Thanks,
Kayda
View 4 Replies
View Related
Jul 11, 2001
I have several DTS packages saved 'locally' to the SQL server. I want to duplicate a package, so that I can make some changes then replace the original. I certainly don't want to rebuild the entire package from scratch. So, I open up the original package, go to the 'Package' menu and choose 'Save As', then give it a new name and press OK. No errors, all appears well, the title bar even shows the new name of the package. But, when I close the package and go the the 'local' package list, it (the new package name) doesn't appear in the list. Refresh, exit SEM, reboot - doesn't show up. I even looked in the MSDB table where packages are supposed to be stored (at least the name / package id / etc), and it doesn't show there as well. Tried from several client machines.
OS: Windows 2000 Server (advanced) SP2
SQL: SQL 2000 Server (no SP's)
Any help would be great.
Bryan Parke
View 2 Replies
View Related
Jun 26, 2007
hi,
I have many jobs on sql 05 and all work but one. This one writes to an Access DB on the same server as SQL. The package works fine. But when executed in the context of the SQL Agent job, it fails.
Jobs that write to a text file work fine. The Access DB has no password required. By the way, that job in sql 2000 worked fine.
Any ideas?
View 4 Replies
View Related
Jun 16, 2006
Hi everyone,
I'm stuck with this and I haven't idea how to solve it. I'm trying to migrate a dts 2000 package from BIDS and I obtain this message:
This wizard will close because it encountered the following error:
Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index (mscorlib)
I'm going to Migrate DTS 2000 Package select my current sql2k production server (it has almost 600 dts although I think that is not any problem at all)
Wizard recognize without problems my server and then I put a folder for save them but on the next step appears the aforementioned message.
Does anyone ever faced this issue?
Thanks in advance,
View 1 Replies
View Related
Mar 20, 2006
[Yes, I know I keep posting this, and I'm sorry for that. But I want someone to confirm that this is a bug and not by design. I feel it is very very important]
All,
I'd like someone from MS to confirm something for me if possible.
I've just come across a situation where a package that is restarted from a checkpoint fails to execute any of its eventhandlers if those eventhandlers are scoped to a parent container.
Is this a bug or by design? Either way I'm VERY worried about this because this is not in the least bit intuitive. This is the most dangerous bug that I have seen in RTM.
-Jamie
If you want a demo of this happening then download this package: http://blogs.conchango.com/Admin/ImageGallery/blogs.conchango.com/jamie.thomson/20060103Package1.zip
It doesn't need any configuration because there are no connection managers. You can just run it standalone.
Run it first time and it will fail but you WILL see msgboxes popped up by the eventhandlers. Go into "Script Task 2" and make the return value "Success" rather than "Failure".
Run it a second time. The package will complete successfully but NO msgboxes will pop up from the eventhandlers. They are not executing.
Reply here or email direct with any queries!
View 1 Replies
View Related
Mar 31, 2006
I am having the same problems as those in another post. SSIS package works fine when executed in BIDS and through execute package utility but it doesnt work when executed as a step in a job.
The other problem is that the logging also doesnt work when i try executing it as a job. So I have no clue about what to do without knowing what error it is. When I run the job it simply says the step has failed.
I have tried most of the solutions posted in other websites most of them to do with using proxies with credentials but havent hit a solution. I would love to get any input on what to do.
Thanks
View 6 Replies
View Related
Mar 2, 2006
All,
I'd like someone from MS to confirm something for me if possible.
I've just come across a situation where a package that is restarted from a checkpoint fails to execute any of its eventhandlers if those eventhandlers are scoped to a parent container.
Is this a bug or by design? Either way I'm VERY worried about this because this is not in the least bit intuitive. This is the most dangerous bug that I have seen in RTM.
-Jamie
If you want a demo of this happening then download this package: http://blogs.conchango.com/Admin/ImageGallery/blogs.conchango.com/jamie.thomson/20060103Package1.zip
It doesn't need any configuration because there are no connection managers. You can just run it standalone.
Run it first time and it will fail but you WILL see msgboxes popped up by the eventhandlers. Go into "Script Task 2" and make the return value "Success" rather than "Failure".
Run it a second time. The package will complete successfully but NO msgboxes will pop up from the eventhandlers. They are not executing.
Reply here or email direct with any queries!
[Microsoft follow-up] This needs either fixing or explaining.
View 11 Replies
View Related
Dec 14, 2007
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using the following line command "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009
Source: NewPackage Connection manager "SourceConnectionOLEDB"
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
What am I doing wrong?
View 4 Replies
View Related
Apr 7, 2006
Has someone managed to pass successfully a variable from a parent package to a child package? I€™ve tried a zillion permutations and I can€™t get it to work. The strange thing was that I was able to successfully do this with pre-RTM builds. Basically, what I am trying to do is:
The parent package has a variable, e.g. ExecutionID which I set using a script to System::ExecutionInstanceGUID. I verified that the variable is set correctly by dumping it to a SQL Server table.
I created a child package variable with the same name.
In the child package, I€™ve created a parent package configuration that points to the ExecutionID variable.
I am trying to read the variable in a Derived Column Task in which I have a column linked to @ExecutionID.
This doesn€™t work. Step-by-step instructions from someone who managed to concur this will be greatly appreciated.
Oh, I didn€™t have any luck hitting a breakpoint in a script task inside a child package with both in and out of process execution also.
View 1 Replies
View Related
Dec 14, 2006
This problem is a bit weird but I'm just wondering if anybody else experienced this.
I have a package that has file system tasks (copying dtsx files actually). Basically the package copies other packages to a pre-defined destination. Thing is, it only works if one of the packages it is configured to copy has some sort of sensitive data (e.g., a connectionstring with a password), otherwise it reports a success message on execution but doesn't actually do anything. I've checked the forcedexecutionresult and it is set to None for that matter.
Just wondering if anybody else experienced this problem and of course if there's a way to solve it.
Thanks.
View 2 Replies
View Related
Jan 12, 2007
I copied and added an existing package as a new package to a project and have been having trouble with settings reverting to those for the original package after I modify and save the changes for the new package. Sometimes happens with the save itself, other times it happens when I close and re-open the package. Most cases are with connections that revert back to the original file reference, but there are also control flow and data flow elements that keep reverting back to either settings from the original package or defaults that result in the re-opened package being in error. Not sure how to get around this issue short of developing the new package from scratch which I'd rather not do since it is fairly complex. Any help anyone can provide is appreciated. Thanks.
View 8 Replies
View Related
Jul 19, 2007
Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
View 4 Replies
View Related
Mar 6, 2008
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
View 5 Replies
View Related
May 21, 2007
Hi,
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
-Prashant
View 4 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
Jun 14, 2006
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
View 5 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Feb 21, 2008
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies
View Related
May 11, 2015
i have created one package in production server called User_Import,It will fetch the info from excel file to the Sql  table, I have executed this package in ssis console successfully,But i have to schedule one job using this package on daily basis for that i have created on sql job using this package, Then it is failing i dont know the exact problem,I have full access to my database and full access to the sql agent to exuete any jobs,I have sharing the error message which am getting in the sql agent level, Please find the error msg:
05/11/2015 15:10:20,User_Imports,Error,1,SFRFIDCSCDB003PSQCM03,User_Imports,AD_User Load,,Executed as user: SFRSA-SFR-SQCM-02. Microsoft (R) SQL Server Execute Package Utility  Version 10.50.1600.1 for 64-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.   Started:  15:10:20  Error: 2015-05-11 15:10:20.41   Code: 0xC0011007   Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B} Â
Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error  Error: 2015-05-11 15:10:20.41   Code: 0xC0011002   Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B}
Description: Failed to open package file "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.".  This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.  End Error  Could not load package "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ ImportsUser_ ImportsUser_ Imports.dtsx" because of error 0xC0011002. Â
Description: Failed to open package file "C:Userssccmadmin DocumentsVisual Studio 2008 Projects
User_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.". Â This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. Â Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B} Â Started: Â 15:10:20 Â Finished: 15:10:20 Â Elapsed: Â 0.015 seconds. The package could not be found. Â The step failed.,00:00:00,0,0,,,,0
View 4 Replies
View Related
Jan 11, 2007
Hi,
I'd like to know if there's a way to pass parent package parameters to a package executed by SQL Server Job Agent? It appears that sp_start_job doesn't have any variable that could accomodate this.
Hope to hear your ideas.
View 7 Replies
View Related
Feb 2, 2007
Hi,
I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.
So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.
Is this possible?
Thanks for your help.
$wapnil
View 6 Replies
View Related
Dec 3, 2007
I have created a SSIS package with a Foreach Loop including a Data Flow Task, which in turn include a Row Count component which pass the row count value to variable with package scope. The variable is used in an Execute SQL Task following the Data Flow Task.
The package executes successfully when executed on its own, but when executed as a child from a parent package (which only include an Execute Package Task) the variable from the Foreach Loop becomes NULL.
There are a lot of other variables in the package receiving values dynamically without any problem, the row count variable however is the only variable in the package that receives a value as part of a Data Flow (and used in following tasks within the Foreach Loop).
Why does the variable become Null? For your information, I am using a variable with package scope and no variables from the parent package are used or passed from the child package to the parent package.
(For your information, we are running the 64 bit version)
View 13 Replies
View Related
Jun 3, 2014
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
Jun 8, 2007
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
View 6 Replies
View Related
Dec 26, 2006
We
have one main package from which 7 other child packages are called. We are using
ParentPackage variables to assign values for variables and database connections.
While the values from ParentPackage variable get assigned to some of the
packages properly, to others it doesn€™t assign the value.
For example:
Except for one of the packages the database connection string gets assigned
properly to all other packages.
Similarly, in another package one of the
variables doesn€™t get assigned. In other packages it is assigned properly.
We
have checked all the other property values and they are exactly the same.
We cannot make any head or tail of this erratic behavior.
Please Help.
View 3 Replies
View Related
Dec 19, 2007
Hi all,
I need one more help!
we can select the dtsconfig file with the Environment variable(indirect configuration);
but i need to select the configuration file at runtime; i've to load the package from the server and apply local configuration file to the package and run in a web server;
Requirements;
1. i have packages with its xml configurations for connection strings alone!
2. i deployed it on the server
3. Trying to execute the packages in a web page onclick event;
We have ASP.net WebPage; in On_Click Event, i have this code;
Application ap = new Application();
Package pk = ap.LoadFromSqlServer("\PROJECT", "itsssqldb", "pmo_package_user", "password", null);
pk.ImportConfigurationFile(@"Packagesdev_staging.dtsConfig");
pk.Execute();
here PROJECT is the Package name; i'm loading the package from the Common Sequel Server 2005; and applying the configuration file to that package and trying to execute this;
but its not using the config file what i mentioned; its returning failure!!
Can you please help me to resolve this issue!,
(The intention of doing this job is to select the configuration file( prod, dev) at runtime)
View 10 Replies
View Related
May 21, 2007
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
View 8 Replies
View Related
