Package Runs In BIDS, Manually In Mgmt. Studio, But Not Via Agent. Why???
Aug 2, 2007
All:
As the subject suggests I am encountering an error while running a package through an agent. Unfortunately the error does not provide much information for me to diagnose the problem, and hence the post.
I have pasted the error below and appreciate help from anyone.
Thank you,
Message
Executed as user: EPSILONSYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:16:31 AM Error: 2007-08-02 10:16:32.25 Code: 0xC002F304 Source: File System Task File System Task Description: An error occurred with the following error message: "Could not find a part of the path 'P:FinanceItems Sold Below CostItems Sold Below Cost_2007-08-01.csv'.". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:16:31 AM Finished: 10:16:32 AM Elapsed: 1.047 seconds. The package execution failed. The step failed.
View 9 Replies
ADVERTISEMENT
Dec 19, 2007
I have a problem where I have an SSIS package (SQL Server 2005) that won't run properly from SQL Server Agent, but it runs fine when kicked off manually from Integration Services -> Run Package or when run in debug from Visual Studio.
The first step in the package checks for the existance of a file via a script task. The script looks like this...
Code Block
Public Sub Main()
Dim TaskResult As Integer
Dim ImportFile As String = CStr(Dts.Variables("BaseDirectory").Value) + CStr(Dts.Variables("ImportDirectory").Value) + CStr(Dts.Variables("ImportFile").Value)
If Dir(ImportFile) = "" Then
Dts.TaskResult = Dts.Results.Failure
Else
Dts.TaskResult = Dts.Results.Success
End If
Return
End Sub
This script runs fine and the file is seen as expected when I run the package manually. But as a step in a SQL Server Agent job, it doesn't see the file.
The SQL Server Agent service is set to start up / log on as a Local System Account. I've also tried setting up a credential / proxy (using an account that I know can see and even move / rename the file) to run the job as but that didn't seem to help.
The package is being run from SQL Server (stored in MSDB) and is set to rely on SQL Server for sensitive information, so I don't think that's an issue; other packages are set up like this in terms of sensitive data and run fine.
Any ideas why my script can't "see" the file I'm looking at when it's kicked off by SQL Server agent? I've looked and looked...I can't seem to figure this out. I would really appreciate any help you might be able to offer up.
View 12 Replies
View Related
Oct 16, 2006
I am using SQL 2005. I have created a SSIS package that basically executes another SSIS package (as part of a larger package) . It runs fine in SSBIDS but will not run if I save it and schedule it using SQL Agent. I should mention I am using a domain/admin account with SQL Agent, so I don't think that is the problem.
When I execute the job in SSBIDS, the Execute Package Utility window pops up, at which point I click on the Execute button, the job runs successfully and then I click on the close button.
I suspect it is not running via SQL Agent because of the user intervention required to complete the task (i.e. clicking on execute as described above). Is this correct? If so, is there a way to override the requirement for any user intervention. Or, could it be from something else?
Thanks for any insight.
View 2 Replies
View Related
Oct 16, 2007
I was facing some issue on MP. Yesterday I changed the SQL services to use the local admin account. That didn't help my MP issue. But it may have created another issue.
When I run the package manually/locally it runs fine. But the scheduled job run and fails with the Title string.
---------------------------------
Executed as user: IL06EDM00SYSTEM. ...tart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_2 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_3 DTSRun OnError: DTSStep_DTSExecuteSQLTask_2, Error = -2147467259 (80004005) Error string: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 18452 (4814) Error string: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_2 DTSRun OnError: DTSStep_DTSExecuteSQLTask_3, Error = -2147467259 (80004005) Error string: Login failed for user '(null)'. Reason: Not associated with ... Process Exit Code 2. The step failed.
--------------------------------------------------------------
Any ideas.
View 1 Replies
View Related
May 16, 2008
Hi,
I have a package designed as bring data tables over to SQL Server. There are 9 data flow tasks that runs parallel, to bring 9 datatables over. In BIDS, when I execute the package, it runs like 8 minutes. Or if I start the scheduled job manually, it runs around 8 minutes too. But it runs about 30 minutes at the scheduled time at midnight.
I wonder what I can do to speed up the scheduled job.
Thanks
View 13 Replies
View Related
Apr 21, 2015
I've created a SSIS package that calls the access dll and fires off 2003 access reports, saves them as PDF's and emails them off.
Now this works fine when I run it manually, but when I schedule and fire off a job I get a very vague error "exception has been thrown by the target of an invocation".
I have copied the access dll to the GAC and .net framework v2.0.50727 but still no luck.
I'm using Bull zip PDF printer and those DLL's are also in the GAC
View 21 Replies
View Related
Dec 28, 2007
I have a 7 step SSIS package that manipulates some data on a DB2 database. The package executes perfectly in Business Intelligence Development Studio. I save the package to my SSIS store and then point my scheduled task to it and it fails after about 9 seconds everytime. I have an identical job that works with a different DB2 database that works without any problem. The only difference is the database it's pointing to.
The package is executing as the same user who created it, which has sysadmin to both the SSIS store and the SQL instance the package is executing on. When I saved the package I selected "Rely on server storage roles for access control" for the protection level.
This one is driving me crazy, can't figure it out. Any idea's?
View 7 Replies
View Related
Feb 14, 2007
Hi,
I have a package with a custom log provider, which runs in BIDS. However when I deploy the package onto SQL Server and run it on the deployed machine, if fails:
"failed to decrypt protected XML node DTS:Password...key not valid for use in specified state..."
Now this is definately to do with the custom log, as if I take it out & redeploy, I can run it on the deplyed server + also run it within a job. I have entered the custom log provider library (+ other required DLLs) in the GAC on the deployed machine, but I'm clearly missing something.
Any ideas pls??? I'm really stuck.
Many thanks in advance,
Tamim.
View 3 Replies
View Related
Mar 16, 2006
Running eval. edition of Sql Server Standard 2005. "Insufficient product level" error is thrown during validation phase of an OleDBCommand data flow task. This task type is not licensed in Sql Server 2005 standard? The component runs a very simple sql update statement against a one row table in Sql Server 2005.
If it works from BIDS, should it not work from dtexec.exe on the same box?
Does dtexec run under the security context of the logged in user?
Thanks,
Ken
View 6 Replies
View Related
Sep 20, 2007
A strange thing is happening to us: we create a bat file that executes an SSIS package with multiple connection managers and tasks.
When calling the bat file from command prompt €“ the package runs just fine!
When calling the same bat file from SQL Server Agent (that runs under the same NT account as SSIS, and all other SQL services, and belongs to local Adminstrators), the package fails half way through with connection failed issue.
Plus it gives us something like this: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER
Has anyone ever experienced this issue, do you have any possible solutions?
Thank you!
Anastasia
View 4 Replies
View Related
Jul 10, 2006
When I run a package I created in the development Studio it runs fine but if I create a job and run it I get an error "The AcquireConnection method call to the connection manager "ODS" failed with error code 0xC0202009"
I have the package setup to use a XML config file and it works fine on all the other packages but this one will not work.
View 6 Replies
View Related
Sep 12, 2007
I'm at a bit of a loss. I've written a package that has about a dozen data flow tasks and each one loads data from text files into tables in a db. It's possible that some of the fields in the text files may have data that would need to be truncated upon insert into the db.
In the data flows, I've set the fields in the data sources I know this could happen to to ignore truncation errors. When I run this within BI Studio, everything works fine. I then loaded the package into the SSIS store on the db server and if I attempt to run it from the SSIS store or if a job executes it, the package appears to be failing because of these truncation errors that I've told it to ignore.
Am I missing something? Thanks!
View 7 Replies
View Related
May 12, 2008
Executed as user: xxxxxx-sql. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 4:14:05 p.m. Error: 2008-05-12 16:14:07.84 Code: 0xC00220DE Source: EPT Dimensions - x Description: Error 0x80070003 while loading package file "E:ETLLoadGroup_Dimensions_Daily.dtsx". The system cannot find the path specified. . End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 4:14:05 p.m. Finished: 4:14:07 p.m. Elapsed: 2.25 seconds. The package execution failed. The step failed.
Hi Im using project real framework and have BIDS installed on same server as SQL Server 2005, when I run from BIDs all
good when I run from SQL Server agent via File system --the first package that master package calls fails
I have double checked the environment variables in Project Real and all good because otherwise BIDs would have failed
and of course in each package the expression data uses @[User::RootDir] to point to the package file path
@[User::RootDir] + \LoadGroup_Dimensions_Daily.dtsx
the issue is the package under SQL Agent is ignoring @[User::RootDir] + \ and finding an old package path somewhere in Bids SLN metadata
Any clues how can refresh the metadata of the package for deployment
thanks in advance
Dave
View 3 Replies
View Related
Jan 26, 2007
I have an SSIS package that when run from Visual Studio takes 1 minute or less to complete. When I schedule this package to run as a SQL Server job it takes 5+ and sometimes hangs complaining about buffers.
The server is a 4 way 3ghz Xeon (dual core) with 8GB ram and this was the only package running.
When I look in the log I see that the package is running and processing data, although very very very very very slowly.
Has anyone else experienced this?
Thanks for your help
Marcus
View 5 Replies
View Related
Jul 12, 2006
Visual Studio runs out of memory when trying to use SSIS package. I am trying to create and run a SSIS package that validates and imports some large xml files >200MB. Validation fails because Visual studio cannot open large files without running out of memory.
The SSIS package throws this error when I run the package..at the validation task.
Error: 0xC002F304 at Validate bio_fixed, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".
How do I increase the amount of RAM that VIsual Studio can use...I have plenty of RAM on my workstation >3GB, but VS chokes maybe around 100MB files?
Thanks,
Forrest
View 9 Replies
View Related
Aug 17, 2006
I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"
Below is the output log...
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
Source: Data Flow Task
Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
Source: Send Mail Task
The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
Source: Send Mail Task
The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 6:59:40 PM
Finished: 6:59:42 PM
Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
Thanks in advance for any help!!!
View 2 Replies
View Related
Jun 18, 2007
Am getting errors trying to deploy a dtsx created by ms (the reporting services execution log one) to which I have made zero changes, but it is not working (2 errors shown below)
error from deployment wizard:
===================================
Could not save the package "H:SSISRSlogRSExecutionLog_UpdateinDeploymentRSExecutionLog_Update.dtsx" to SQL Server "xxxxxxxxxxx". (Package Installation Wizard)
===================================
The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServer(Package package, IDTSEvents events, String serverName, String serverUserName, String serverPassword)
at Microsoft.SqlServer.Dts.Deployment.DtsInstaller.SavePackageToSqlServer(WizardInputs wizardInputs, String packagePassword, Boolean bUseSeverEncryption, String serverName, String userName, String password, String packageFilePath, List`1 configFileNames)
at Microsoft.SqlServer.Dts.Deployment.DtsInstaller.InstallPackagesToSqlServer(WizardInputs wizardInputs)
===================================
The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToSQLServer(IDTSPackage90 Package, IDTSEvents90 pEvents, String ServerName, String ServerUserName, String ServerPassword)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServer(Package package, IDTSEvents events, String serverName, String serverUserName, String serverPassword)
error from sql management studio
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToDtsServer(Package pPackage, IDTSEvents pEvents, String sPackagePath, String sServerName)
at Microsoft.SqlServer.Dts.ObjectExplorerUI.ImportPackageAsAction.ImportPackage(ImportPackageAsForm dlg)
View 7 Replies
View Related
Jun 26, 2006
I've mined countless threads all over the Net where people are having my problem, but none of the solutions I've seen seem to apply.
When I run a DTS package from Enterprise Manager, everything works great. When I schedule the same package as a job, it fails immediately and reports this error:
Executed as user: SERVER-NAMESYSTEM. DTSRun: Loading... Error: -2147221005 (800401F3); Provider Error: 0 (0) Error string: Invalid class string Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 713. Process Exit Code 1. The step failed.
My hunch is the SERVER-NAMESYSTEM.DTSRun account doesn't have sufficient privileges, but I can't find how/where to fix that.
Help, please.
Thanks,
Doug
View 2 Replies
View Related
Oct 8, 2007
I have a stored procedure that syncs 2 databases. It runs fine if I go into the stored procedures and execute it manually, there are a few errors but it doesnt choke on them it completes with the desired end result. However if I create a job to run this dbo, it fails, The error log shows this:
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
10/03/2007 16:06:00,sync,Error,0,MACHINENAME,sync,(Job outcome),,The job failed. The Job was invoked by User MACHINENAMEAdministrator. The last step to run was step 1 (sync).,00:00:19,0,0,,,,0
10/03/2007 16:06:00,sync,Error,1,MACHINENAME,sync,sync,,Executed as user: companyname. ... 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles __noelle(5281) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 0(5036) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) New DNN User [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 0000000(3795) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 007(8) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exis... The step failed.,00:00:19,14,3621,,,,0
So the error is 3621, and the severity is 14 which as I understand it means Insufficient Permissions.
I have already tried this:
Making the Job Agent service logon as MACHINeNAME/Administrator instead of System, giving the user here (companyname) more permissions, but I am at a loss as to why this runs ok when manually executed but fails when run as a job. I have created the job by scripting the dbo "Execute to a file" and having the job run that file as a step, I have also tried copying and pasting the code from the stored procedure into the job step. It always fails for the same reason.
I must say I am very new to SQL, I am a network admin and have inherited this database and server from another client and have to get this sync task to run daily at certain intervals.
Please can anyone shed light on this issue?
Thanks,
View 7 Replies
View Related
Sep 12, 2014
When i run it from sql server data tools on the test box it runs fine. However when i run it from the ssisdb directly i get the below error.
reload table tablename1 from Excel file:Error: The "filetoload.Outputs[Excel Source Output].Columns[Product]" failed because truncation occurred, and the truncation row disposition on "filetoload.Outputs[Excel Source Output].Columns[Product]" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
reload table t from Excel file:Error: There was an error with filetoload.Outputs[Excel Source Output].Columns[Product] on filetoload.Outputs[Excel Source Output]. The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".
View 1 Replies
View Related
Mar 31, 2008
HI,
RE: SQL Server 2005, SP1
Getting this error when I try to connect to Integration Services in Management Studio:
******************************************************************************
Cannot connect to THISSERVER
Additional Information:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
Connect to SSIS Service on machine €śTHISSERVER€? failed:
Library not registered
******************************************************************************
Any ideas? I am going to apply the SP2 later... but don't know if it's related.
Thanks
View 4 Replies
View Related
Mar 24, 2006
Is there a better/faster/persistable way to generate sql objects with the ms sql server mgmt studio than to go thru that long wizard? I hate having to configure it each time.
View 9 Replies
View Related
Jan 13, 2006
I just tried installing SQL Server Management Studio Express Edition (SSMSEE?) and it wouldn't install because I had the "regular" SQL Server Management Studio already installed. Is that correct? The version I installed was a CTP. Is the final version going to have the same limitations?
===============================================
Creating tomorrow's legacy systems today.
One crisis at a time.
View 1 Replies
View Related
Jun 9, 2006
I have Visual Studio 2005 standard installed and want to add SQL server managment studio can I just install the extras pack or do I need to re-install SQL server express with the advanced options.
Thanks Paul
View 1 Replies
View Related
Jul 21, 2007
I have just installed SQL Server 64x on Vista 64 but when I try to find the server in SQL Management Studio nothing appears to connect to. I did run the program to make my Vista login a SQL Admin. Any ideas why?
View 5 Replies
View Related
Sep 7, 2006
I have created a SQL Everywhere database using SQL Server Management Studio (because I couldn't figure out a way to create it with VisualStudio.NET).
Then, I try to open it in Visual Studio.NET, using the following steps:
Add New Data Source
Pick type Database
Click New Connection
Pick Data Source "<other>", and Data Provider ".NET Framework Data Provider for OLE DB".
Pick OLE DB Provider "Microsoft SQL Server 2005 Everywhere Edition OLE DB Provider for Windows".
Enter a full path to the filename as the Server or File Name. (I've tried it with and without doubling the backslashes in the pathname - no difference.)
Click Advanced and enter the Password that I assigned to the DB.
Click Test Connection - it says it succeeded.
Click OK. It says "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done."
Now what? Thanks.
View 1 Replies
View Related
Dec 16, 2007
When I start Management Studio I get the following message and a suggestion to change a setting:
(I can choose to continue and the system databases appear, but the DB I created does not.)
"Unhandled exception has occurred in a component in your application. Cannot create a stable subkey under a volitile parent key."
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Any assistance is appreciated.
biobot
View 2 Replies
View Related
Feb 7, 2006
No. No I do not want to save changes to that sp_who2 query I just ran. I just want to close the window, and not be bothered with the computer's obsessive compulsive need to save everything I do. Dang it all, it sounds like my computer is working for the NSA leaving a paper trail that even a kitten with Attention Deficit Disorder on catnip could follow.
As you can tell, I am weaning myself off of Query Analyzer, and can not find the checkbox for "Don't bother me when I close a window". Anyone else come across it, yet? It does not appear to be under tools->options or query->query options.
View 1 Replies
View Related
Mar 31, 2008
Is there a way to tell SQL Server 2005 Management Studio that I don't want it to include "USE [dbname]" and "/****** Object: Table [dbo].[TBL_NAME] Script Date: [date] ******/" when it creates scripts? I searched the forums and couldn't find an answer, and I don't see it in Tools->Options.
View 5 Replies
View Related
May 26, 2008
I created a bunch of stored procedures on my dev machine using Visual Studio 2008 interface.
Now I am using MS SQL Server Mgmt Studio 2005 and looking at the PRODUCTION database online. I tried to create the new stored procedure. But how do I SAVE it to the database? It keeps asking me to save the sql file locally, but I don't know how to do it to the db itself. Please help.
Thanks!
View 5 Replies
View Related
Mar 25, 2008
I deleted a database referenced in a maint. task and then I tried to delete the maint. task. I am getting an error "Exception has been thrown by the target of an invocation" and also it says Named Pipes Provider:, error 40: Could not open a connection to SQL , error 53). I think it has something to do with deleting Maint. Tasks outside of SSIS. Does anyone know of a solution?
Thank you.
View 20 Replies
View Related
Apr 17, 2006
Hi,
I've had requests for a version of my product ViEmu, a VS.NET 2003-VS2005 add-in, which will work within SQL Server 2005 Management Studio. I had a look at the Mgmt Studio, and it seems to be a version of the VS2005 environment customized for the product. There is a registry hive along the line of the one in Visual Studio, but located in HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server90ToolsShell.
I looked for any hint online, but it seems largely undocumented.
I tried plugging my software by writing the right 'Packages' and 'AutoloadPackages' keys, and running "SqlWb /setup", which seems to do something. Nothing happened afterwards, anyway, the DLL doesn't seem to be loaded into the process. I tried using the '/log' option, but an error message comes up (which doesn't describe the /setup option either).
Is there a way to load a VS package into SQL Server 2005 Mgmt Studio? Is this a problem with the PLK? Is it unsupported? Has anybody been successful in such a feat? Would it be ok if I hack some way, no matter how obscure? Is this deliberately turned off, as in the Express editions?
Best regards and thanks in advance,
- J
----------------------------------------------------
ViEmu - vi/vim emulation for Visual Studio
View 1 Replies
View Related
Feb 22, 2006
Is there any way to provide 'Windows' credentials to connect the Management Studio to a remote SQL 2000 DB when I am not logged on as that user (on the dev machine where I am running Mgmt Studio)?
I do of course have local machine admin rights via an AD domain account added to the machine administrators on the remote SQL box itself.
View 1 Replies
View Related
