Package Wont Run In A Scheduled Job
Jan 9, 2007
Hello,
I have put together a simple SSIS package that runs fine both via BIDS and via Mgt Studio.
The problem I have is that I can't get a scheduled job to run it. My scheduled job has only 1 step - and that step runs the package.When I right click in Mgt Studio (SQL Agent) and choose "Start Job" I get this error :
------------------------------------------------------------------------------------------
Executed as user: NMR044BRASQL886SYSTEM. ....3033.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 14:10:56 Error: 2007-01-09 14:10:56.50 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Property" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2007-01-09 14:10:57.04 Code: 0xC0202009 Source: B2B_Sales_Territory_Send_Back Connection manager "b2b_datamart" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.". End Error Error: 2007-01-09 14:10:57.04 Code: 0xC020801C... The package execution fa... The step failed.
------------------------------------------------------------------------------------------
Can anyone help please?
I'm new to SSIS so clear+simple answers appreciated.
Thanks in advance
Mgale1
View 10 Replies
ADVERTISEMENT
Sep 28, 2000
Hi All,
I have created a DTS package on a developement server that connects to our Exchange server and downloads customer service e-mail and inserts them into a table. This is done using a VB script.
When I right click on the job and execute it, it runs fine and we can see the mails after they show up in the table.
However, when I schedule the job to run at 15 minute intervals it fails with a vb runtime error. When I copy the job to my personal machine and schedule it, it runs just fine and again we see the mails in the table.
The server has the latest version of the scrrun.dll as well as IE 5.0.
I have messed around with this for 3 days now and have gotten MSFT involved as well.
Anyone seen this before? Any ideas or help will be greatly appreciated.
Brad Keck
View 1 Replies
View Related
Jan 16, 2008
Hello Everyone,
When I run DTS from SQL Enterprise Manager its running fine.But When I Scheduled it then it takes lot more time.
What is the differenace between when we run it from Enterprise manager and run it from Schedule?
Why Scheduled DTS running very slow? Is there any solution of it?
If anyone know Please replt as soon as possible.
Thanks,
Bhavik Shah
View 5 Replies
View Related
Sep 15, 1999
I have created a package that takes a Visual FoxPro .dbf and imports into SQL7. If I run the job, it works fine. If I schedule the job it fails stating that I can't find the .dbf, the same one that it just found when run manually. What gives?
View 1 Replies
View Related
May 11, 2006
My database resides on my ISP SQL server, in Colorado. My new data can be found as a TXT file on the C: drive of the shipping PC in my Florida office.
I created a DTS package to import the data from the TXT file to a table in my database. The package works fine, until I schedule it to run.
The package uses the UNC address to find the TXT file. As a result, I can go to any PC in my office and execute the package.
But, when I schedule it to run unattended, it fails.
Can anyone give me any advice?
View 1 Replies
View Related
Jun 22, 2004
Hi,
I have a DTS package which when I execute it manually, it executes perfectly. I need to schedule it and therefore had to use the scheduler which would creata a job for the package. The problem is that job. It does not execute; it fails every time. The error message is: Sql server does not exist or access is denied.
I have tried to trouble-shoot by setting up an alias for the server in the client network utility for sql server. I also create a new dsn with the new alias. It still failed with the same error message. I edited the properties of the dts package to connect to the server's ip instead of it's alias or logical name. Still fails.
Any ideas anyone?
Maria
View 1 Replies
View Related
Jul 21, 2007
The package has 15 DTS 2000 tasks that execute sequentially, depending on 15 successes. The 15th task then invokes 11 more DTS 2000 tasks simultaneously which each invoke a mail task on their success. The package is saved as part of a valid project. The entire package is successful executing within Visual Studio -- 37 green boxes. I move the package as file system .dtsx to my database as a stored package within MSDB and then schedule it as a job via SQL Agent invoking the MSDB stored package.
The package has a log file referenced in the scheduled job for errors and diagnostics while each of the 26 Transforms Data Tasks within the DTS 2000 packages writes to a fully qualified exception file on my server. The log and exception files have valid data when the package runs in Visual Studio but the exception files are untouched when the job fails and the log only references one of the 11 dependent steps with a job failed message. SQL tables are updated and files created from the Visual Studio execution but nothing is created when the job fails.
I am assuming there is a disconnect with the way I am moving the package to the scheduled job but I don't know what the problem is. Can anyone help?
Den
View 2 Replies
View Related
Jul 20, 2005
Hi,A DTS package which is running fine when execute ,always fails asscheduled job.I read from the previous posts about MS KB article 269074, securityand MDAC, but I don't understand and don't know how to solve it.Please help.My scenerio:SERVER : MS Windows 2000 server is in a PRODUCT DOMAINMS SQL SERVER 7.0 SP2- Agent started up by SYSTEM ACCOUNT andConnection as NT AuthenticationWORKSTATION (Enterprise Manager as Tool to connect MS SQL SERVER andwrite and schedule DTS Package): MS Windows XP connect as NT Authenticationbut in WORKGROUP DOMAINBest RegardsNipon Wongtrakul
View 1 Replies
View Related
Nov 20, 2006
I have a large number of SSIS packages, which I have developed over the last few months.
Having written and tested them locally, running in VS05 etc - I have moved them to a server, stored in the MSDB database.
I am having real troubles with packages that move tables from one database to another.
I am working on a migration project, so I have several packages that move tables from the source database, into my staging database.
One package which will not run at all, basically just moves 15 tables from database A on my server to database B.
The package is essentially a few SQL tasks to create tables, then a data flow.
The data flow contains the table movements as an OLE DB source to an OLE DB destination. No intermediate processing.
In an attempt to get some meaningful logs of the reasons for failre I ran the package from the commandline with the output piped to a text file. That text file contained the following error:
Error: 2006-11-20 11:48:47.78
Code: 0xC0202009
Source: Data Flow Task Source - tblParking [1641]
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe.
".
End Error
Error: 2006-11-20 11:48:47.78
Code: 0xC0047038
Source: Data Flow Task DTS.Pipeline
Description: The PrimeOutput method on component "Source - tblParking" (1641) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
End Error
Error: 2006-11-20 11:48:47.84
Code: 0xC0047021
Source: Data Flow Task DTS.Pipeline
Description: Thread "SourceThread1" has exited with error code 0xC0047038.
End Error
I've googled for most of the error messages there, and tried applying some of the things I found.
I've set the commit size on the OLE DB destination to 10k rows.
I've set the number of engine threads to 2.
The SQL Agent service is started by a domain user that has sufficient server and database roles to do what it needs - other packages run fine.
I'm really stumped here now - this package will run perfectly in visual studio, but fails when ran
as a scheduled task, and I'd really appreciate any advice or pointers
View 6 Replies
View Related
Apr 1, 2008
Hello,
I'm having problems scheduling a package and using the "Set Values" option. I'm setting a variable value to a connection string for a Connection Manager (I couldn't set it to keep the password using the "Data Sources" tab), however, this raises an error on SQL Server Agent:
Executed as user: SEQM001SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Argument ""Package.Variables[LogDBConnString].Value;Data Source=123.456.789.000;Initial Catalog=myDB;Provider=SQLNCLI.1;Uid=myUser;Pwd=myPassword;Auto Translate=False;"" for option "set" is not valid. The command line parameters are invalid. The step failed.
However, if I copy the command line generated and run it using dtexec, it all goes perfectly fine. Any clue to what's wrong?
Thanks in advance
View 3 Replies
View Related
May 4, 2006
I have created a DTS package to read data from a SQL Server table and copy it to an Excel file on one sheet. I have tested the DTS package manually and it runs. I scheduled the package but it keeps failing giving the following error message. The path to the Excel file is valid and the SQL server is connected to the server where the Excel file resides.
... DTSRun: Executing... DTSRun OnStart: Copy Data from vw_Symbols to vw_Symbols$ Step DTSRun OnError: Copy Data from vw_Symbols to vw_Symbols$ Step, Error = -2147467259 (80004005) Error string: 'S:Mission Critical EnterprisesCurrent ProjectsJPMC Aperture Rollout 05-100-1-0001Symbol RequestsJPMC - Symbols Added.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Error source: Microsoft JET Database Engine Help file: Help context: 5003044 Error Detail Records: Error: -2147467259 (80004005); Provider Error: -534774783 (E01FFC01) Error string: 'S:Mission Critical EnterprisesCurrent ProjectsJPMC Aperture Rollout 05-100-1-0001Symbol RequestsJPMC - Symbols Added.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Error sour... Process Exit Code 1. The step failed.
View 6 Replies
View Related
May 11, 2000
I have a Local DTS Package that I created that runs fine. I have scheduled it to run daily but it errors out when run it from the agent. This is an excerpt of the error from the Job history.
Delete from Table [Intranet].[dbo].[Employees] Step, Error = -2147217887 (80040E21)
This Local DTS Package, deletes the records in the file and reimports the data from an AS400 file that is recreated for me daily.
The only thing that has occured to me so far is that perhaps the SQL Agent Service Account needs permission to delete the records. (I'm using NT Security).
Am I on the right track or do you think it's something else?
View 1 Replies
View Related
May 27, 2004
I have created a package that do a file search on an AS400 box using activex scriptand UNC path to do the file search. When I run it locally, it's fine. When I run it on the server, it fails. The login setup for the sql server agent service and the job is the same and they both have admin rights.
In addition, I also have another package pointing to the same path, but the job is to create a text file to the UNC path. It works even when I schedule it.
May someone please help me to solve this problem ?
Thanks!
View 2 Replies
View Related
Apr 17, 2007
I have a SSIS package that consists of 3 Script Tasks, two Data Flow Tasks. Each script tasks executes a FTP command. The first one renames the file, the second gets the renamed file and third resets it back to original name for testing.
When I run via BIDS or DTSExec all work fine. When I schedule it, only the first script runs. It never downloads the file.
Setup - SQL 2005 SP2, SSIS is running, 32 bit OS, SQL Agent Account is local admin. Package protection level is DontSaveSensitive. PrecompileScriptIntoBinaryCode = True
What am I missing??
Thanks
Mike Allen
View 7 Replies
View Related
May 8, 2007
I'm learning SSIS and ran into this error...
I have a package that has its source as an Oracle DB on another server. This package will feed data from that source to a SQL Server 2005 DB. So far, the package works fine if it is executed manually even in SQL Mgmt Studio. It's only failed when I tried it as a scheduled job. I guess I need to do "Package Configurations" which includes the UserID and password for accessing Oracle DB ... but I don't know how. Please help.
Regards,
dnncpt
----------------------------------
Here is the error message:
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
05/08/2007 09:49:00,DataFeed,Error,0,<MyDBServer>,DataFeed,(Job outcome),,The job failed. The Job was invoked by Schedule 8 (Schedule DataFeed Grant Tables). The last step to run was step 1 (DataFeed Grant Tables).,00:00:02,0,0,,,,0
05/08/2007 09:49:00,DataFeed,Error,1,<MyDBServer>,DataFeed,DataFeed Grant Tables,,Executed as user: <MyDBServer>SYSTEM. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 9:49:00 AM Error: 2007-05-08 09:49:00.81 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2007-05-08 09:49:01.86 Code: 0xC0202009 Source: AWARDS Connection manager "SourceConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01005: null password given; logon denied". End Error Error: 2007-05-08 09:49:01.86 Code: 0xC020801C Source: Feed data t... The package execution fa... The step failed.,00:00:02,0,0,,,,0
------------------------------------
View 1 Replies
View Related
Nov 28, 2007
Hello Experts,
I found some similar threads and guides but they didn€™t help me with my special problem.
I converted a dts package (built in SQL 2000) to SQL 2005. Right now it€™s a legacy package.
(I tried the Tool Microsoft SQL Server 2000 DTS Designer Components to open the package. It€™s going well)
I would like to build a scheduled job which runs this dts package.
In SQL 2000 you can right click on the package and create the job.
SQL created string like this:
Dtsrun ASDFHJKSF56A4DFSLAKDHFJKS65646ASDFHSF (very long sting, it€™s the ID of the dts package)
How can I make something like this in SQL 2005?
Where I can get the ID of a dts package from?
Best Regards,
Alex
p.s.
- I red the thread from Jamie Thomason and will directly mark as answer after I get a answer
- of cource I will delete my thread too if I overlooked a thread with the same issue
View 5 Replies
View Related
Apr 8, 2008
I have 3 SSIS packages I had in a project and exported and scheduled via an SQL Agent job. 2 are working great and one is failing. I have noticed on this one its also having issues in BIDS. It runs sucessfully once then next day when I go in it fails. If I just go into the Data flow and open up the SQL Destimation and then hit ok and try re-running it works. It is like there is something that it doesn't remember.
Same thing happens in SQL Agent if before I promote I go into SQl destination editor hit ok save then
create my build run it via agent job it works 1st time but fails on the following time. I don't see anything different between this SSIS and the others but there must be something.
All of these are simple copy data from as/400 to SQL server with some data conversions.
Here is the error msg I am receiving.
Message
Executed as user: PERFORMANCEstacyadmin. ....3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 5:55:11 AM Error: 2008-04-08 05:56:00.88 Code: 0xC0202009 Source: Load WeeklySalesHistory Current Week WeeklySalesHistory [184] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.". End Error Error: 2... The package execution fa... The step failed.
What am I missing.
Stacy
View 3 Replies
View Related
Apr 25, 2007
I've managed to get the basics coded into my package. Nothing fancy, it is all quite literally embedded inside the package. No config files, parameters, variables, etc. I've imported the package into SSIS. I can right click on the package and select Run Package. The package fires off, validates, runs through the entire process, and completes successfully. However, when I set up the package to run as a scheduled task, it fails almost immediately with the following output.
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 3:28:07 AM
Error: 2007-04-25 03:28:07.41
Code: 0xC0016016
Source:
Description: Failed to decrypt protected XML node "DTSroperty" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
End Error
Error: 2007-04-25 03:28:11.36
Code: 0xC001602A
Source: Package Connection manager "FTP Connection Manager"
Description: An error occurred in the requested FTP operation. Detailed error description: The password was not allowed
.
End Error
Error: 2007-04-25 03:28:11.36
Code: 0xC002918F
Source: Card10 FTP Task
Description: Unable to connect to FTP server using "FTP Connection Manager".
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:28:07 AM
Finished: 3:28:11 AM
Elapsed: 4.297 seconds
Help.......
View 3 Replies
View Related
Aug 11, 2006
I created a DTS Package. It worked fine if I execute the DTS from DTS designer. It failed after I right clicked to Schedule Package, and than right clicked on the job to Start Job from Management - SQL Server Agnet - Jobs. When I clicked View Job History, the error was "The job failed. The last step to run was step 1 (DTSPackageName).
Why did it fail from scheduled DTS? Thanks.
DanYeung
View 1 Replies
View Related
Mar 14, 2006
I have an SSIS package created from a SQL 2000 DTS using the Migration Wizard. The package imports data from a MySQL database to a SQL 2005 64-bit database running on 64-bit windows server 2003. The package runs fine when executed from SQL Server Management Studio but when I schedule it as a job it fails with:
Executed as user: [the domain admin account]. The package execution failed. The step failed.
I've tried a lot of different ways to make this work including creating a new SSIS package. Again, the package ran fine except when it was scheduled as a job.
Any ideas would be appreciated.
thanks!
View 20 Replies
View Related
Jul 6, 2006
i had scheduled to run a package it failed but a part of the package still shows up on the integration system running packages. i tried to stop it or delete it nothing works. when i try toi run the package even in visual studio that part of the package fails.
how do i remove the running package???
Thanks
jas
View 3 Replies
View Related
Sep 14, 2007
Hi,
Attempting to schedule and execute a package. The server is a 64bit clustered sql 2005 server.
The package was developed on my local install of sql 2005 client tools. I can run the package within BIDS, I can export and run the package from MSDB, but I cannot get it to execute without failure when scheduled.
I suspect it is some weirdness caused by the difference between 32 bit and 64 bit type program, but do not know what to do to figure it out.
Job history output below:
Date 14/09/2007 1:07:30 PM
Log Job History (SISS)
Step ID 1
Server servername
Job Name SSIS test job
Step Name Import NE Outpat
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: HAHSillsqlserver. ...9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:07:30 PM Progress: 2007-09-14 13:07:31.54 Source: Clinics Validating: 0% complete End Progress Progress: 2007-09-14 13:07:31.54 Source: Clinics Validating: 33% complete End Progress Progress: 2007-09-14 13:07:31.75 Source: Clinics Validating: 66% complete End Progress Error: 2007-09-14 13:07:31.89 Code: 0xC0202009 Source: ImportNewEnglandOutpatientData Connection manager "Clinics" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2007-09-14 13:07:31.89 Code: 0xC020801C Source: Clinics Clinics Access Database [15] Description: SSIS Error Code DTS_E_CANNOTACQ... The package execution fa... The step failed.
Thanks for all suggestions,
View 5 Replies
View Related
May 7, 2006
I have a SSIS package with an FTP task to download a Excel file and populate a table using an excel connection mnager and a SQL Server Destination and it always fails with the following error when scheduled:
The job failed. The Job was invoked by User sa. The last step to run was step 1 (FTP-DM-CRN_ALLOCATION_COMMENTS).
Executed as user: WEB-INTSQLSYSTEM. The package execution failed. The step failed.
The box on which SQL Server is installed is on a workgroup on the domain and the SQL Server is started up by the Local System user on the box.
I am thinking this has to do with windows security based on all the information that I have read on these kind of error messages. Any input on resolving this will be much appreciated.
Thanks,
MShah
View 1 Replies
View Related
May 9, 2006
HELP! I have been banging my head against a brick wall on this one all this morning AAAAAAGGGHHH!
1. I have an SSIS package that runs a simple SQL script and then updates a few tables by downloading some XML of the web. It runs fine when I kick it off manually under SSMS.
2. I created a SQL Server Agent job to run it every day. This always fails. The error information in the log is useless ("Executed as user: domainuser. The package execution failed. The step failed." - I had already figured that out!). It fails almost straight away, and when I enable logging for the SSIS package, no info is ever logged (text file, windows event log, whatever).
3. Out of desperation I have changed Agent to run under the same domain user account that I created the package with. No use.
My questions:
1. How can I get more detailed logging from SQL Server Agent?
2 Any ideas about why it's failing in the first place.
Many thanks in advance.
Ben
View 17 Replies
View Related
May 13, 2008
I have one SSIS package that fails on occasion. And I can then run this in the job by itself after it fails and it runs fine. Any ideas? Any ideas on what is causing this. It is not every day but about once a week lately but it just happened again today to this is 2nd time in 4 days this has happened. It is always on this same part in the SSIS that it fails when it does fail. 4 times in last 2 weeks.
This step it is on here has a OLE DB - DB2 source and SQL server as destination. It does a couple data conversion, derived columns and then just copies the data from the db2 table to the sql server table.
Message
Executed as user: PERFORMANCEstacyadmin. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 6:06:12 AM Error: 2008-05-13 06:09:22.84 Code: 0xC0202071 Source: Copy SalesTender Retail TmpSalesTenderRetail [97] Description: Unable to prepare the SSIS bulk insert for data insertion. End Error Error: 2008-05-13 06:09:23.42 Code: 0xC004701A Source: Copy SalesTender Retail DTS.Pipeline Description: component "TmpSalesTenderRetail" (97) failed the pre-execute phase and returned error code 0xC0202071. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 6:06:12 AM Finished: 6:09:23 AM Elapsed: 191.157 seconds. The package execution failed. The step failed.
Stacy
View 2 Replies
View Related
Dec 28, 2007
I have a 7 step SSIS package that manipulates some data on a DB2 database. The package executes perfectly in Business Intelligence Development Studio. I save the package to my SSIS store and then point my scheduled task to it and it fails after about 9 seconds everytime. I have an identical job that works with a different DB2 database that works without any problem. The only difference is the database it's pointing to.
The package is executing as the same user who created it, which has sysadmin to both the SSIS store and the SQL instance the package is executing on. When I saved the package I selected "Rely on server storage roles for access control" for the protection level.
This one is driving me crazy, can't figure it out. Any idea's?
View 7 Replies
View Related
Oct 16, 2007
I was facing some issue on MP. Yesterday I changed the SQL services to use the local admin account. That didn't help my MP issue. But it may have created another issue.
When I run the package manually/locally it runs fine. But the scheduled job run and fails with the Title string.
---------------------------------
Executed as user: IL06EDM00SYSTEM. ...tart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_2 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_3 DTSRun OnError: DTSStep_DTSExecuteSQLTask_2, Error = -2147467259 (80004005) Error string: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 18452 (4814) Error string: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_2 DTSRun OnError: DTSStep_DTSExecuteSQLTask_3, Error = -2147467259 (80004005) Error string: Login failed for user '(null)'. Reason: Not associated with ... Process Exit Code 2. The step failed.
--------------------------------------------------------------
Any ideas.
View 1 Replies
View Related
May 16, 2008
Hi,
I have a package designed as bring data tables over to SQL Server. There are 9 data flow tasks that runs parallel, to bring 9 datatables over. In BIDS, when I execute the package, it runs like 8 minutes. Or if I start the scheduled job manually, it runs around 8 minutes too. But it runs about 30 minutes at the scheduled time at midnight.
I wonder what I can do to speed up the scheduled job.
Thanks
View 13 Replies
View Related
Apr 28, 2006
Hi
Using SQL Server 2005 with SP1, I have successfully managed to schedule jobs to run SSIS packages. They connect to another SQLServer 2000 box, using SQLOLEDB connection manager, to extract data and import it into SQL 2005. The protection level for the packages is Server storage so that the job is run under the SQL Agent account. This is a specific domain account so that it can access other servers.
However, using the same setup for a scheduled job to to run an SSIS package which connects to another SQL Server 2000 box with connection manager SQL OLEDB, I get the following error message:
The AcquireConnection method call to the connection manager "xxx" failed with error code 0xC0202009.
As the both the successful and failed jobs seem to have been set up in the same way with the same protection levels and are both run under a domain sql agent account, is there anything else I should be checking that I don't know about?
Any help is much appreciated!
View 3 Replies
View Related
Apr 16, 2008
Hi,
I have one SSIS package which is written in Visual studio business intelligence tool. For that SSIS packages i have scheduled a job from SQL server management studio 2005. I mean i have scheduled a job in SQL server agent.
This job which i have scheduled contains 6 SSIS packages and the other 5 SSIS packages executes successfully but this only fails giving sone com.Interop exception.
But it is failing giving some com.interop exception. Not sure what type of error is this?
It give following type error:
Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-03-27 23:00:00.81 Code: 0x00000000 Source: Execute DTS 2000 Package Task Description: System.Runtime.InteropServices.COMException (0x80040427): Execution was canceled by user. at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread() End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 PM Finished: 11:00:00 PM Elapsed: 0.579 seconds. The package execution failed. The step failed.
I get the same error when i try to execute the package from Visual studio Business Intelligence tool.
Can you please help me out as to what is this "System.Runtime.InteropServices.COMException" exception occuring when scheduling or executing the job.
Thanks,
Ashok
View 1 Replies
View Related
Apr 21, 2015
I've created a SSIS package that calls the access dll and fires off 2003 access reports, saves them as PDF's and emails them off.
Now this works fine when I run it manually, but when I schedule and fire off a job I get a very vague error "exception has been thrown by the target of an invocation".
I have copied the access dll to the GAC and .net framework v2.0.50727 but still no luck.
I'm using Bull zip PDF printer and those DLL's are also in the GAC
View 21 Replies
View Related
Oct 2, 2007
We have a vendor who has an SSIS package that executes a DTS package. We've asked that they migrate the DTS code completely to SSIS, but that is something that will not be done in the near future. The package is scheduled to run every 5 minutes through a SQL Server scheduled job. 95% of the time the package executes without an error, but occassionally the following error is reported.
Date 10/2/2007 7:35:00 AM
Log Job History (Pyxis - Data Load)
Step ID 1
Server DEVSQL1V5
Job Name Pyxis - Data Load
Step Name Run SSIS Package
Duration 00:00:03
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: Domain_NameSQLService. The return value was unknown. The process exit code was -1073741819. The step failed.
When I look at the DTS and SSIS package logs no errors are reported and each log indicates the package completed successfully.
Any ideas what this exit code is indicating or how to further troubleshoot the problem?
Thanks, Dave
View 4 Replies
View Related
Mar 27, 2014
SQL Server 2012VS 2010 SQL Server data toolsFTP Connection Manager - port 21, chunk size 1kb, passive mode=false, saved plain text pwDownloads 1 csv file to local directory on SQL Server box.This always works when run from the package. And always gives a timeout error when scheduled.
Message
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Started:Â 11:04:59 AM
Error: 2014-03-27 11:05:31.12
  Code: 0xC001602A
 Â
[code]...
SQL Server Agent is set to Logon As my domain account, and in the package history it says "logged on as " my account.
View 10 Replies
View Related
