I am using reportitem to show the data in the header from a table cell.i see the values just on the first page, from second page onwards reportitems not showing the values at all.
I am getting the reportitems values from a tables header cell and also made the tables header cell's property checked repeat header in all pages.
Header is appearing but the values in reportitems are not populating from page 2 onwards.
i tried / used everything including inserting group header still i don't get it towork.
How can I set the page orientation to landscape? I tried to set "printDocument.DefaultPageSettings.Landscape = true;" but it didn't work. I have spent hours fixing the problem but I couldn't get it work. Below is the code:
I'm new to SQL Reporting service. some how i tryed to manage and create reports. I have a small question. when i start creating report i wanted to change the orientation of report from Potrait to Landscape so i can get a bit more space. i can see report getting expanded as we keep working. but when i tryed to export to Acrobat PDF, the content getting into next page insteed in same page. to over come this issue i wanted to generate report with landscape orientation, i have seen this kind of option in Crystal report, but i dont know how to make the same in this report.
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports Report that links to another report Both reports return more than one page Reporting Services installed Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
Hi All, In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far: 1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior 3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Hi - I am pretty new to Reporting Services. I need to create a report where a single result row from the Select Statement populates an entire page of data. The regular grid or Matrix reports don't fit this need. Is there a simple way to do this?
I have a report which is multiple pages in the report viewer. Now I want to make it shown in the webpage report viewer just in one page. Is there any ways to realize it?
# 1 - You want a Multipage Hit Counter to keep track of the number of Hits each individual webpage gets in your website. # 2 - You also want to store the Webpage Hit Count Values into a SQL Database, using Stored Procedures.
Dim objCon As New SQLConnection("server=yourServerName;User id=idName;password=yourPassword;database=HitsCounter")
Dim cmd As SQLCommand = New SQLCommand("EXEC dbo.webcounter1", objCon)
objCon.Open()
Dim r as SQLDataReader
r = cmd.ExecuteReader()
r.read()
strcounter3.text = "Hits : " & r.item(0)
end sub
</script>
Also insert the following inside the body tags of webpage #1 <asp:Label id="strcounter3" font-size="X-Large" font-bold="True" bordercolor="Silver" width="300px" borderstyle="Inset" forecolor="Lime" visible="True" runat="server"></asp:Label>
Marked in Red webcounter1 is the Stored Procedures Name. ALso marked in<B> Red counter3 is the name of the Database. This is where you would make your changes inside the Webpages.
Use the following Stored Procedure with Webpage #1
CREATE PROCEDURE dbo.webcounter1 WITH RECOMPILE AS BEGIN SET NOCOUNT ON DECLARE @hits INT SELECT Hit FROM counter3 WHERE ID = 1 update counter3 set hit = hit + 1 EXEC sp_recompile counter3 END GO
The Database Table has 2 columns which consists of an ---ID & Hit Column -- The Table Name is (counter3) The best way to explain is by showing so posted below are Webpages 1 & 2 along with there Stored Procedures.
Dim objCon As New SQLConnection("server=yourServerName;User id=idName;password=yourPassword;database=HitsCounter")
Dim cmd As SQLCommand = New SQLCommand("EXEC dbo.webcounter2", objCon)
objCon.Open()
Dim r as SQLDataReader
r = cmd.ExecuteReader()
r.read()
strcounter3.text = "Hits : " & r.item(0)
end sub
</script>
Also insert the following inside the body tags of webpage #2 <asp:Label id="strcounter3" font-size="X-Large" font-bold="True" bordercolor="Silver" width="300px" borderstyle="Inset" forecolor="Lime" visible="True" runat="server"></asp:Label>
Use the following Stored Procedure with Webpage #2
CREATE PROCEDURE dbo.webcounter2 WITH RECOMPILE AS BEGIN SET NOCOUNT ON DECLARE @hits INT SELECT Hit FROM counter3 WHERE ID = 2 update counter3 set hit = hit + 1 EXEC sp_recompile counter3 END GO
Now this type of Hit Counter works fine to a point. Visiting Webpage #1 accumilates 1 Hit & Visiting Webpage #2 Accumilates 2 Hits. And each time there 's a revisit to these pages they acquire 2 Hits each. I'm Guessing the problem is in the Stored Procedure storing there values in Memory. If Someone can Help Figure Out how to fix this. This could be a nice Website Multipage Hit Counter. I can use some help Guys feel free to advise.
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Is it possible to add hyperlinks to the Report Manager Home Page that link to other aspx pages? I have created some associated data entry aspx pages that I want to enable access to from the Report Manager Home Page (if possible).
I have a tried two different reports one with table and the other without The last textbox in both reports contains enough text which should fill half of first page and half of second page. In both reports the print preview and export to PDF keeps the first page blank and puts all the data in the second page. It appears that the textbox control doesn't know when to place a pagebreak when in print preview and export to PDF. The rdl file has no pagebreaks defined anywhere. Thanks in advance for your help!
I want to setup my report in landscape format. How do I do it? I have altered the report margin in report properties. However if we export the report to PDF €“ still goes to portrait format. Even though in pdf itself I have changed the print setup to landscape, but it doesn€™t change anything.
Hello, I have a need to present a different orientation of data, and I would normally do this with CASE. I've tried to go that route in this instance, but it hasn't worked.
The following query expresses the data as it currently is:
SELECT TOP 10 Prod, Acct, TC, SubmitRep1, SubmitRep2, SubmitRep3, Percent1, Percent2, Percent3 FROM dbo.tbl_CYProcessedSales WHERE Proj IN (100,200) AND Percent1 < 80 AND NOT SubmitRep3 = '' AND Prod = 'RETA'
Hello. I have a report but by default it prints Portrait and 1.0inch Margin. I would like to programmatically set the values of my report to 0.2 inch margin and Landscape. I am using RDLC (Local Report). Does anyone has an idea how to achieve this?
I need to express the (x)Rev columns in a single Revenue column. Nornally, I would do this with CASE, but the column has to follow the current month of the year minus one month DATEADD(MONTH,-1,GETDATE())) and be cumulative.
sorry but this is my first dayes to using sql report services i make 14 report in sql report services server and do't know how can i add this reports to my aspx page and every report have parameters how can i send this parmeter to reports when he open or load in aspx page like companyID and employeeID my report have his datasource and dataset sorry but i just start to using reports services
I've built a fairly straight forward report in RS that looks normal in preview mode and in PDF format with out any issues.But when I export it to Excel report header is not appearing in each page.Any ideas as to why this is occurring?thanks in advance,Ramesh KS
I've got a situation where a report I'm developing needs to have hyperlinks to another report. Easy enough. However, the hyperlink needs to land on Page 2 of the other report, instead of the default page 1. Any ideas??
i have created a report now i want to have the report print on one page instead of two pages which is doing now.how can i do that.i am using SSRS 2005. please help
