Page Setup Disabled In Report Designer
Mar 22, 2007
I'm trying to change the snap-to grid functionality in a SRS 2005 Report Design (within VS 2005). I tried the same steps in the following post, without success. Based on the SRS help, it appears you change Grid Settings by accessing the File > Page Setup dialog, but the Page Setup (along with Print) is disabled.
Maybe these are instructions for Report Builder only? If so, how do you adjust the Grid Settings (to turn off the "snap" functionality) for a SRS Report project in Visual Studio?
Thanks,
Michael
View 3 Replies
ADVERTISEMENT
Jul 18, 2007
Hi,
This is really a Visual Studio 2005 Report Designer problem but I didn't see a good place to post this question in the Visual Studion forum.
On some reports when looking at the Data tab the Generic Query Designer is disabled. Anybody know why? The report runs. Other reports have it enabled.
I am using Visual Studio 2005 sp1.
Thanks,
Darren
View 1 Replies
View Related
Apr 2, 2007
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
View 1 Replies
View Related
Nov 22, 2007
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
View 6 Replies
View Related
Oct 19, 2006
When installing SQLEXPRESS I am getting this message:
Setup failed because service MSSQL$SQLExpress is disabled for the current hardware profile. Services must be set with the current Hardware Profile logon property enabled.
Anybody knows how to fix this problem?
Eitan
View 6 Replies
View Related
Jun 30, 2006
After I use the report builder to create a generic report, how do I actually get that report into the report designer so that I can modify it more effectivly?
The issue that I have now is that the file on the report server is not a .rdl file and if I simply save it as one and then bring it into VS to modify it the code file is a html structure rater than a XML file type.
Any suggestions would be appreciated. Thanks
View 3 Replies
View Related
Mar 18, 2008
Hello everyone,
I created a custom assembly using C# to transform some binary data into text, and in this assembly I used one win32 dll developed by our customer to help me to do the tranformation.
The code I used to call the win32 dll is like below:
[DllImport("tdasuie.dll", EntryPoint = "AlrtLogConditionToText",
ExactSpelling = false, CharSet = CharSet.Auto, SetLastError = true)]
private static extern UInt32 AlrtLogConditionToText(Byte[] pbCondition, StringBuilder pszText, UInt32 dwSize);
I defined a C# method to call the above win32 method and return a string. Then in the report, I called this C# method to get the correct string.
In the report designer, the C# method in the custom assembly can return the correct string in the preview window. But after I deployed the report into the report server, the textbox will only display "#error" in the report manager web page.
Can anybody help me on it? Thanks a lot.
Danny
View 4 Replies
View Related
Jan 19, 2007
I have three types of specific reports that i have to create with the input parameters (range) either
1: By date (rdl 1)
2.By Month (rdl 2)
3.By Year (rdl 3)
Is it possible ( or how do I ) to create just one report template ( one rdl) with the three sets of parameters ( hiding/invisible which ever two sets base on user selection) and the output of the report will display the desired type( either by year, month or date).
I ask this because its possible to create a drill down report from year down to date etc in report designer (vs 2005). Not sure if I can create one instead of three rdls and with the 'logic' built within that template.
Thanks
Regards
Alu
View 4 Replies
View Related
Jun 5, 2007
How to limit number of rows displayed in a report, i' am using report project in Visual studio 2005 to design my reports
How to use page navigation once i deploy the report on to report server..?
View 1 Replies
View Related
Aug 14, 2006
Hi All,
I have a question, How to user the Multi value in Visual Studio Report Designer.
My dataset contains the following
Select empno,empname,basicpay,deptcd from employee where deptcd in (substring(@gdept,1,4))
Here variable gdept is the report parameter. I am passing the value.
it works fine with single value.
( the source of gdept is a another dataset to list the deparment code+name,
Example
DEP1 - COMPUTER
DEP2 - ADMIN
DEP3 - FINANCE
)
when I preview, i have a combo box to select the department.
If I choose one deparment, it works fine.
If I choose more than one department or select all I have error message
"substring function requires 3 aruguments."
what is wrong is the query
Please advise.
Cheers,
Saleem
View 1 Replies
View Related
Jun 15, 2007
In Report Designer I am able to create a Model data source and see my entities/fields.
But when I run the report I get a "Failed to execute Query" message.
I know in the past this was an issue because Designer doesn't allow you to specify a perspective.
Does anyone know if this has been resolved?
I'm using SP2
Thank you,
Joe
View 1 Replies
View Related
May 29, 2007
Is there a way to schedule report snapshots and still give users the option to change the parameters? I found that report parameters are disabled when I set the execution options to use a snapshot. I fixed the problem by setting the report to use cached data that expires on a custom schedule and by scheduling an e-mail subscription that creates a new report cache soon after the cache expires. I'm guessing there must be a better way to provide good report performance with the default parameters as well as flexibility.
View 1 Replies
View Related
Oct 18, 2007
Hi,
I dont know if theres a way to print a section of some report, for example a summary report, where I have several charts and tables, and I want to print just the first 2 charts
Could this be done by mapping the document or separating it in some other way?
I tried using 'SubReports' control, but this way I need to have for example the first two charts in a different report (lets say 2charts.rdl), and then in the summary.rdl, add the control and set the link to 2charts.rdl,.... but I think this is pretty annoying considering the future modifications of the format in the 2charts.rdl...
Thanks for your help...
Regards
-Edith Colegio
View 1 Replies
View Related
May 16, 2008
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
View 5 Replies
View Related
Sep 14, 2007
Hi,
When i try to deploy a Datasource which is using a report server model, i dont see the Deploy
Option Enabled. It is disabled for Report Server Model.
My connection string is server=http://localhost/reportserver;datasource=/i2i Report Model/SCM Data Warehouse Model
Can anyone point me to the issue here ?
Thankyou
Vidya
View 1 Replies
View Related
Nov 11, 2015
How do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies
View Related
Jan 23, 2008
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far:
1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior
3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Sam
View 6 Replies
View Related
Jan 23, 2008
Hi:
I made a report that is 10 pages long. I like to show all the data in one page (after deployment). Any idea if this is possible?
View 8 Replies
View Related
Feb 27, 2008
Hi - I am pretty new to Reporting Services. I need to create a report where a single result row from the Select Statement populates an entire page of data. The regular grid or Matrix reports don't fit this need. Is there a simple way to do this?
Thanks - Dave
View 4 Replies
View Related
Dec 10, 2007
I have a report which is multiple pages in the report viewer. Now I want to make it shown in the webpage report viewer just in one page. Is there any ways to realize it?
Thanks
View 1 Replies
View Related
Apr 10, 2008
How can I get only one page of data each time when I call the render menthod from the SSRS webservice
View 3 Replies
View Related
Feb 21, 2008
Are there any training seminars/classes anyone would recommend attending? I am looking to further develop my Visual Studio Report Designer Skills. Leaning more to the intermediate/advanced side.
View 4 Replies
View Related
Mar 28, 2007
Hello,
I am developing some reports for an ASP.NET solution, but my IDE does not display the design view of the reports. Instead, it only displays the XML definition even when I click View Designer. Yesterday the reports showed up correctly, and I know that the design view is there. Is there a setting that has been changed somewhere?
View 2 Replies
View Related
Feb 7, 2007
I have Reporting services 2000 (Version 8.00.1038.00) installed (installed with installation of MS CRM) and visual studio 2003 installed however, do not have the business intelligence report designer available. Where can I obtain the report designer addin? We don't have a RD 2000 CD. Is what I need available via download?
Thanks
View 3 Replies
View Related
Apr 14, 2007
Well, I noticed several other threads on this topic, but the solutions accepted as answers did not resolve my issue.
I'm trying to pass a like clause via a parameter in a report. I'm running the report against an Oracle 10 db using the microsoft for oracle oledb driver. Here's my sql I'm using in the report designer:
select * from dbprod.database_names_vw
where db_name LIKE ('%' + :1 + '%').
When I run this, I get the dreaded: ORA-01722 error
I referred to this page: http://msdn2.microsoft.com/en-us/library/aa337223.aspx
which covers: Using Query Parameters with Specific Data Sources
I tried all the variations from that link...I tried the "@" sign. I tried the ?. I tried double quotes...I've tried everything...
I was under the impression I had to use unnamed parameters, as above....
Frustrated in Cali.
View 1 Replies
View Related
Jan 27, 2006
Routinely when I use BIDS to work on a report design, I cannot close BIDS because I get a message box that says:
Microsoft Visual Studio cannot shut down because a modal dialog is active. Close the active dialog and try again.
Of course, there is no visible dialog open. I actually have to terminate the process from task manager.
I do not get this problem when using SSIS or SSAS. Only SSRS.
Any Ideas?
Thanks!
BobP
View 76 Replies
View Related
Mar 12, 2007
Hi all.
I have the problem on showing the records in my report.
I explain how i designed the report. I made the report in Business Intelligence Project. The report I am achieving is the Personal Information of all employees.
After creating a query/dataset, I dragged the fields to the textboxes. I am trying to show 1 employees' record in each page.
My report looks like this...
EMPLOYEES PERSONAL INFORMATION
Employee Name : _______________ <There is a photo Image here>
Age : _________________________
Address: ______________________
Telephone #:___________________
Province:______________________
BirthPlace:____________________
Birthdate:_____________________
Gender:_______________________WEIGHT:____
Civil Status:_________________Height:____
Relgion:______________________Hair Color:____
Nationality:__________________Eye Color:_____
IN CASE OF EMERGENCY PLEASE CONTACT
Name:__________
Address:_______
telephone:_____
EDUCATIONAL BACKGROUND
EDUCATIONAL LEVEL.......SCHOOL.....FROM-TO......DEGREE
Elementary..............Harvard....1990-1992
High School.............LaSalle....1992-1995
College.................UP.........1995-2000
_______________________________________________
Run Time: 2/3/2007
Page No. : 1
I used dot above just for spacing and alignment but not included in my actual report.
I used table for EDUCATIONAL BACKGROUD.
My problem is: when i ran the report, it can't automatically creates report for all employees. It only shows the first employee in the database.
Any suggestions and guidance please.
Thanks.
-Ron-
View 9 Replies
View Related
Oct 29, 2007
What you see on the designer is not what you get? How frustrasing can this be when you develop a report? Why did Microsoft made such a deviation from actually designing the windows UI (where you always get what you want and it is a true wysiwyg)
We are doing some data entry apps and would like to simulate a paper based report at the end of the data entry. I designed a portion of it and preview showed what I want. Published the report and found out that the layout is messed up in the IE. I went trough the pain of correcting the layout and made it work for IE. Now when I use the preview the layout is messed up. How can I desgin a layout that works on both worlds. (client side and server side??)
We would like to make the report avaliable in both the windows application(client side) as well as through the report manager (server side)
View 1 Replies
View Related
Nov 7, 2007
Hi all,
Does anyone know how to setup the "table details" to take up all the space in a page (extend the boarder to the end of the page) even there is only one record in the table details?
Normally, for example, if you got a table in a report, if the table has only one record, the boarder of table will only take up maybe 1/4 of the page space (header, 1 line details, footer). if the table has 5 records, it may take up half of the page, but the boarder of table neven extend to the end of the report and i wwant it happen!!!!!!! Thank you.
Cheers,
Bryan
View 8 Replies
View Related
Feb 18, 2004
I've loaded the Report Services from Microsoft unto our server. How do I get the Client Designer tool loaded on other boxes. Does anyone know where the Install is to install the report designer into a Client machine?
Thanks
Al
View 1 Replies
View Related
May 25, 2008
...and Report Builder?
I have SQL Server 2005 Express and Reporting Services and Report Manager up and running...
Thanks
View 5 Replies
View Related
Aug 23, 2007
Hi, I have installed SQL Server 2000 and Reporting Services 2005 and Visual Studio 2003 all works OK but I need to create a report with the Microsoft SQL Server Report Designer 2005 and it doesn't appear in my VS, someone could help me with this?
Marcos.
View 8 Replies
View Related
Feb 7, 2008
Hi,
Is there an ActiveX control for the Report Designer available so I can just drop it into my program so the user can edit or add reports without buying the Business Intelligence Studio or Visual Studio 2005? I understand I'll have to pay royalties on this but depending on the cost I am open to it.
Thanks
View 1 Replies
View Related