I'm writing reports that absolutely require page totals for several columns. I don't need a cumulative total for everything in the report, just for the items on the current page. Is this doable in SSRS? If not, is there another reporting package that supports putting data in the header or footer?
View 3 RepliesI have a report that groups by dept #, job code and earnings code.
9999 Administration
033 Secretary
200 Regular Pay 44.00 1000.00
300 Sick Pay 8.00 25.00
400 Overtime 3.00 75.00
8888 Janoitorial
055 Janitor
200 Regular Pay 24.00 800.00
300 Sick Pay 4.00 15.00
400 Overtime 1.00 45.00
On the last page of my report I want to sum the earnings totals by earnings number. For Example:
Totals
200 Regular Pay 68.00 1800.00
300 Sick Pay 12.00 40.00
400 Overtime 4.00 120.00
Can this be done?
We have a report that includes a list that expands down to 17 inches to accomodate two pages for a report and this list is grouped on a particular location. Each report is grouped by State. So in each state there can be many locations that report various items that comprimse two pages.
Now, what we need is a "state grand total" page and I am wondering about the best way to go about doing this. We do not want to create a new report with a separate stored proc that returns grand totals. What we would like is to do a running total or something like that. I could then include this on a subreport, but I need it to be the last page. For some reason, I thought there was a Report Footer section, but I only see Page Footer.
I hope I made myself clear enough and not being too confusing and I many thanks for any helpful information.
Hello-
I am new to reporting services and had a couple questions regarding the formatting of my reports.
First-
I have a matrix report that needs to be sorted in both ascending and descending order by Total Buys for each Title. I have inserted a subtotal for Buys in the report Layout but I cannot get the report to sort by this Total, only by the name of the Title. Is there an advanced sorting option I am missing?
Second-
My matrix reports generate on hundreds of pages and I would like them to generate on as few pages as possible to make viewing the reports easier. I have made sure to turn off page breaks in every category but this does not seem to have any effect. How else should I go about eliminating these page breaks?
Any help would be greatly appreciated, thanks in advance.
-Eric
I currently have an Ungrouped Dataset being displayed in a Table. One of the columns include AMOUNT.
This is an example of what my report looks like atm:
==================
**Report Name**
No Name Amount
Signed By XXXX
==================
I would like to display a SUBTOTAL of the Amounts for each page and, on the final page, a TOTAL of the Amounts.
Yes the Last Page's SubTotal and Total will be the same.
Looking like:
===============================
pg1
**Report Name**
No Name Amount
Sub Total Amount
Signed By XXXX
(lastpage)
**Report Name**
No Name Amount
(<-----no huge spaces between Table/Subtotal)
Sub Total Amount
Total Amount
Signed By XXXX
=================================
Issues:
I've found a way to get a Page's SubTotal, but the way I found requires this to be put in a field on the Page Footer Section.
This means that on the final page, the SubTotal will be at the top of the Page Footer and not neccessarily directly beneath the table.
So:
1. Is there a way to move the Page Footer so that its printed DIRECTLY under neath the Page Body instead of at the bottom of the Page?
2. If not, is there a way to have the SubTotal of each Page and a Final Page Total in the Page Body section.
Cheers.
I have some data grouped in a table by a certain criteria, and for each group it is computed a subtotal for the group. Of the values from each of the group, I want to create a grand total on the report by adding every subtotal from each group.
Example:
...
....
Group1 Â Â Â Â Â Â Â Value
              10
              20
Sub Total 1: Â Â Â Â 30
Group2 Â Â Â Â Â Â Â Â Value
               15
               25
Sub Total 2: Â Â Â Â Â 40
Now, I would like to be able to add subtotal 1 (30) to subtotal 2 (40) and my grand total would be 70. Can I accomplish this task in SSRS?
I have been providing sales data for a few months now from a table that is set up like this:
Date WorkDay GasSales EquipmentSales
9/1/2006 1 100.00 200.00
9/4/2006 2 50.00 45.00
etc.
As can be seen, the data is daily, i.e., on the first workday of September we sold one hundred dollars in gas and two hundred dollars in equipment. On the second workday of September we sold fifty dollars in gas and forty-five dollars in equipment.
Now, however, the data I have to pull from is cumulative. So, using the last table as an example it would look like this:
Date_WorkDay_GasSales_EquipmentSales
9/1/2006 1 100.00 200.00
9/4/2006 2 150.00 245.00
etc.
To make things more complicated, the powers that be wanted this data presented in this fashion:
Total Sales:
1_2_etc.
300.00 95.00 etc.
So, I have been doing a pivot on a CRT to get the data to look like I want. The code is like this:
with SalesCTE (Month, WorkDay, [Total Sales])
as
(
SELECT
datename(month, cag.date),
cag.WorkDay AS [Work Day],
sum(cag.sales_gas + cag.sales_hgs) AS [Total Sales]
FROM CAG INNER JOIN
Branch ON CAG.[Oracle Branch] = Branch.OracleBranch
group by cag.date, cag.WorkDay
)
select * from SalesCTE
pivot
(
sum([Total Sales])
for WorkDay
in ([1],[2],[3],[4],[5],,[7],,[9],[10],[11],[12],[13],[14],[15],[16],[17],[18],[19],[20],[21],[22],[23])
) as p
So, my question is:
How do I get the data to give back daily totals instead of the cumulative amounts for each workday? If the query was a simple one, I'd do something like
select [1] as [Day 1], [2]-[1] as [Day 2], [3]-[2] as [Day 3], etc.
but the query is far from normal, with the CRT and the pivot. I can't seem to get it to work how I'd like.
Any advice/answers? Thanks in advance!!!
P.S. I don't know how to get it to quit with the freakin' smileys.... I suppose you can figure out what my code is really supposed to look like above. Needless to say, it doesn't include a devil face and a damn music note...
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies View RelatedHello I have a project that uses a large number of MS Data access pages created in Access 2003 and runs on MS SQL2005.
When I am on lets say my client, (first page in a series) data access page and I have completed the fields in the (DAP), I am directing my users to the next step of the registration process by means of a hyperlink to another Data access page in the same web but in a linked or sometimes different table.
I need to pass data entered /created on the first page to the next page and populate the next page with some data from the first page / table. (like staying on the client name and ID when i go to the next page)
I also need the first data access page to open and display a blank or new record. Not an existing record. I will also be looking to creata a drop down box as a record selector.
Any pointers in the right direction would be appreciated.
I am some what new to data access pages so a walk through would be nice but anything you got is welcome. Thanks Peter€¦
The following objects are placed on the Report body of the Report pane of SQL Server 2005 Reporting Services :
<textbox: expression1>
<textbox: expression2>
<table:table1 with at least 30 columns and 30 expressions>
<textbox: string1> - considered as the Title in the Footer section of the report
<texbox:string2> <textbox:expression3>
<textbox:string3> <textbox:expression4>
<textbox:string4> <textbox:expression5>
<textbox:expression6>
I can't find any explanation why is it string1 and string 2 of the footer section of my report displayed separately from the expression3 which is aligned on it and the rest of the object on the second page.
The expected design is that all Footer items should be displayed together of whether it is placed on the first page or on the last page.
As a workaround of this, I converted string 1 into an expression (Added = and enclosed the string with double quote).. As a result, all of the items in the Footer section are now placed together on the last page of the report.
I also remember one of the issue I encountered before where the Footer items where placed together on the first page and still have space at the bottom of the page, but then expression 6 is forced to display (alone) on the last page of my report.
I can't find any discussion related to this, I wish somebody could give me an idea why RS behaved like this.
Thanks in advance
Fit an intere table in same page without page break for save the excel export.
My table has a Group for order my dates.
I need to have the intere table in the same page, i don't care about blank space at the end of the page.
I can't use the page break beacuse i need an excel export in a unique sheet..
I have tested.. every page break..you'll have a different sheet in your excel export
I need something like this
page 1
Zone
1
2
3
4
5
6
7
7
8
9
..
page 2
Zone
1
2
3
4
5
6
7
7
8
9
..
but an unique sheet in the excel export
Hello,
If I have a report that includes a page header, the report viewer will render the report at the full width, but if I hide the page header and show only the body it will use the absolute width of the report.
I have a 7" wide report, with .75" borders set on each side.
Interactive & Print size are set to 8.5x11
Changing these sizes has no effect on the behavior of the viewer, which appears to ignore them.
When I view this report in the local viewer the contents fill the window if there is no page header.
If I enable the page header then the report is drawn at 8.5" wide, leaving a _big_ white border on the right side.
Any comments or workarounds that anyone knows? I know the local viewer is not a standard configuration (at least it seems) but it is what we need to use.Thanks,//Andrew
Hi, I wanted to know that can we access a webpagefrom a store procedure in sql server 2000 like we run a exe file from sql server. Bye.
View 1 Replies View Related
Hi,
I issued this command on Tempdb but it doesnot shrink the file.
dbcc shrinkfile (tempdev_3,1)
go
Messages:
-----------------------------------------------------------------------------------------------------------
DBCC SHRINKFILE: Page 4:11283400 could not be moved because it is a work table page.
-----------------------------------------------------------------------------------------------------------------------------------------------
I have checked that there are no tables associated with any user in tempdb. Any help is appreciated.
Regards,
Razi
How can I print a field that is in the dataset on each page? I added a textbox in the Page Header and use =Fields!ProjectName.value in the value property. I got an error "Fields cannot used in page header and footer."
How can I have the table header shows on each page? Currently if the data goes to the second page, there is no table header.
Thanks.
DanYeung
Hi Team,
When i view the Report from SSRS Report preview Tab it's working fine, But when i deploy that and try to view in the IE
I am seeing the Body background color in between the image and page border of the page footer how to solve that?
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies View RelatedI have a report with tablix. when tablix returns no rows Footer is coming all the way up . How to display the footer at the bottom of the page all time.
View 0 Replies View RelatedHow do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies View Related In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the
1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to
false - the header doesn't print - it just leaves the same amount of space.
How do you get the report to ignore that. I do have a report header built
into the body of my report. I have tested this by increasing the size of my
page header and it does move the report up or down on the 1st page by that
amount.
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far:
1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior
3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Sam
I am running a DBCC SHRINKFILE on "FILE1" of a database (it has fileid = 1)...intent is to remove 70GB of file space:
DBCC SHRINKFILE (N'FILE1' , 400000).
For the SPID that's doing the shrink, In activity monitor you can see:
Waittype: PAGEIOLATCH_EX on resource: 9:3:15411328
(the DB is dbid=9)
But why does it need a page from fileid=3? Are there page dependencies between files that prevent moving a page within a given file? Does it need that fileid3 page to come along?
Its just sitting there in the SUSPENDED state for the last hour....I am going to leave it another 5 hours or so before cancelling.
The dm_exec_requests has an estimated percent complete at 83% and holding....not sure if I can believe that.
Hi all
I have a problem which I am really struggling with. I have a report that normally spreads over three pages. We have a list setup so that for each customer it picks up fees and expenses and displays it in sections. We have a page break after FEES so that expenses start on a new page. FEES and expenses are tables.
We need to have a page footer set for the bottom of the report but to appear on the first page only per customer. I.e. we do not want it showing on the EXPENSE pages. We have played with the IIF command but can not seem to print htis per customer only by using global variables.
=IIf(Globals!PageNumber=1,"(Please note 30 day invoice period)
The example above however only prints on the first page of the entire report. So if three customers appear then this will only appear for the first customer and I have a feeling I may not be able to link this to list.
If I can not use a page break and enter this into the list then I have a problem with the text field moving up and down depending on the size of the FEE section. For example if 5 fees are brought back then the text field will be lower then a customer that has only 2 fees.
I after a solution that can either allow my page fotter to appear every time a new customer appears on a page and hiddern for the sub sheets. Or the ability to allow my text field to start at a fixed position on my report. Has anyone had a similar issue.
thank you
Michael
Hi:
I made a report that is 10 pages long. I like to show all the data in one page (after deployment). Any idea if this is possible?
Hi - I am pretty new to Reporting Services. I need to create a report where a single result row from the Select Statement populates an entire page of data. The regular grid or Matrix reports don't fit this need. Is there a simple way to do this?
Thanks - Dave
Is it possible to force the content of the page footer to always display at the bottom of a report? I have a report that shows customer orders. It has its interactive height set to 5 inches. There is one customer order per report page. Most of the reports don't require 5 vertical inches (but some do).
How can I make sure that the stuff in the page footer (date, page number, etc.) always gets rendered in the same position for each report? Currently, the page footer follows the last detail line so the footer information sometimes is only midway down the report page.
Thanks.
BCB
Hi
I would like to know if there is some way to find a row in a table by the RID that sp_lock returns :
for example
"SELECT * FROM Authors (UPDLOCK) WHERE name = 'John'"
sp_lock returns the locked row id :
2:328:11 (file#page#slot on page)
How do i get this row???
Thanks
PB
hi i am very concerned about this problem in my report.
to solve this problem i increased the height of page footer,blank page vanishes but the page footer is not printing on every page,it is only printing on 1 st page .
i am having probelm because the records from the dataset are more than the page limit , page break is there but no footer is printing on the second page only blank space is there.
can u please help me out from this problem??
can i use 'page number' and 'total pages' outside the page header and page footer?
View 1 Replies View RelatedI think I know the answer but I have a report that is supposed to print in Ledger. It has a header that has report information on the left and on the right has page count and date run. When the user resizes the page to letter, only the first part of the header shows (left piece with report information). Instead of resizing the header it seems it truncates it. Is there a way to resize it. If I move the right side over it looks centered on the Ledger size.
View 1 Replies View RelatedI want to show more records in each page when i view report
Question is subject above
any idea? thanks
I have a report which is multiple pages in the report viewer. Now I want to make it shown in the webpage report viewer just in one page. Is there any ways to realize it?
Thanks