I have a report with a table. Inside the table I have a subreport in a group footer and I want to force a page break before the footer.
I've tried putting the subreport inside a rectangle and set the rectangle to have pages breaks but that doesn't work.
any ideas?
Thanks!
I am using RS 2005 with SP2. I am trying to print a table Group footer on a brand spanking new page. I have checked the "Page Break at Start" of the Group, However in the Report view the footer starts printing directly below the end of the group, and not on a new page. I have also tried to add a rectangle to the group footer and selected Page Breaks before rectangle but the group footer still doesnt print on a page of its own. I would appreciate any suggestions.
I have a group in my report that contains an empty footer row to get a better visibility. Because the row has a frame it should be hidden if its the last row on the page. How can I manage that?
View 4 Replies View Related
how can i avoid a page break in a group.
Thanks in advance.
I am using three groups in my report on a table. The option "page break at end" is checked in all three groups. It is working fine as for report output is concerned but in print preview it generates extra pages. In print preview page break gets occured at every group regardless of the fact that group break occurs or not. As a result, it is generating extra pages. please help me out
thanks.
Hello,
I'm trying to solve an undesired behaviour on my report. I have two nested drill-through groups (in fact, it doesn't matter if there two nested groups), and although I haven't ticked any option related to insert a page break after the group, if the group is too large to fit in a page, i get the first element of the group in the first page (collapsed), and the second element in the third page. So, by now, my report looks like this:
page 1:
|
+ Value1 |
|
|
----------------
page 2:
|
blank |
|
|
----------------
page 3:
|
+ Value2 |
|
|
----------------
page 3:
|
+ Value3 |
+ Value4 |
|
----------------
And what I want is that it looks like this:
page 1:
+ Value1 |
+ Value2 |
+ Value3 |
+ Value4 |
----------------
Is it possible to achieve that behaviour? How?
Thanks in advance, regards
I have a report (bills of lading for shipments) that uses a table to organize the data coming in and groups by customer. Each customer grouping has a header, body and footer in the table. A print run might generate 100 bills of lading, each between 1 and 4 pages long.
I have marked the group to force a new page when each new group occurs.
As it is the report runs beautifully EXCEPT that the footer prints wherever it happens to end up -- midway down the final page of the bill and looks quite goofy.
What I really need (and my client is really surprised that SSRS won't me) is to print the group footer at the bottom of the final page of each bill of lading.
Bills of lading may be several pages per customer, so until the group footer is hit, I don't want any footer info at all. As I said, it all works fine except for the final page of each bill, where the group footer occurs whereever it has ended up.
Jim
12/4/07
This post didn't get much of a response. So perhaps I should amend it -- If what I am trying to do is impossible, what would be the preferred way?
Hi
I'd like a parameter for the report layout: Portrait Or Landscape. So is it possible to set the page high and width using an expression or in code based on my parameter?
Also on a similar note. I want a parameter for 'Page Break After X'. Is it possible to apply a page break after my table group X based on this parameter? I know if I edit the group I can tick 'page break at end' but I can't apply an expression to this.
Cheers
How can I stop a group from being split across 2 pages?
1 table group
1 detail group consisting of 2 rows, can be N number of these per table group
e.g.
TG1
DG1row1
DG1row2
DG2row1
DG2row2
...
DGnrow1
DGnrow2
TG2
DG1row1
DG1row2
DG2row1
DG2row2
...
DGnrow1
DGnrow2
<--page break should occur here-->
TG3
DG1row1
DG1row2
DG2row1<--but it is actually appearing somewhere like this-->
DG2row2
...
DGnrow1
DGnrow2
If TG can fit on one page, then it should do so
I can't put a page break after a group, as it may only be 4 rows, this would be too wasteful
Hello All!
Is there a "clean" way to group rows from a table by the row count, and then force a page break each time the count hits a maximum number (say 25 rows)?
As an alternative, can you set the maximum count of rows in a table, and then force a page break if it reaches that count? (this may actually be a better solution for my needs).
Thanks!
Hi,
I have a report where i do a page break for each supplier. I want to reset my page number to '1' when there is a group break.When i googled for this functionality i found the following chris Hay's blog which provides the solution.
http://blogs.msdn.com/chrishays/archive/2006/01/05/ResetPageNumberOnGroup.aspx
But if i follow the same, I get #Error instead of page number during the run time.How do i resolve the error?
Also, I want to display the "page 1 of totalpages in group" like that. Is that possible?
Thanks in advance
I developed a main report containing numerous subreports. But now I'm trying to page break on these subreports and because these subreports all have sub-sub reports, I get this error when I try to run this report..The value '22' is invalid. Valid values are between '0' and '1'. (rrRenderingError)..I am grouping on uniqueidentifers and I do not get errors on subreports that have sub-subreports. How can I avoid this error and get these subreports to page break? (I don't get any errors if I remove the page breaks).
View 3 Replies View RelatedI have a report with several matrix objects. The data contained in each matrix is simple. One matrix has one column of labels and a column of data. The other has 3 columns of data. Both matrix's only show about 25 rows of data. A variable amount of data is displayed above the matrix's so that sometime the render across a page boundary. Whenever this happens the matrix doesn't render rows down to the bottom of the page. A considerable amount of empty space is left on the page, the completed matrix is displayed on the next page. I'm wondering how to get the matrix to render in this empty space.
This problem only occurs when I view the report on screen, in the Visual Studio "Preview" window, or from the Report Server web site. Tiff, pdf and printed output doesn't contain the extra space.
I've tried adding my matrix to a List and a Rectangle to see of this would fix the problem but it didn't help.
I've check the dimensions and margins or the page and I don't think I have any sizing problems, everything should fit on the page.
--Mark
I currently have an Ungrouped Dataset being displayed in a Table. One of the columns include AMOUNT.
This is an example of what my report looks like atm:
==================
**Report Name**
No Name Amount
Signed By XXXX
==================
I would like to display a SUBTOTAL of the Amounts for each page and, on the final page, a TOTAL of the Amounts.
Yes the Last Page's SubTotal and Total will be the same.
Looking like:
===============================
pg1
**Report Name**
No Name Amount
Sub Total Amount
Signed By XXXX
(lastpage)
**Report Name**
No Name Amount
(<-----no huge spaces between Table/Subtotal)
Sub Total Amount
Total Amount
Signed By XXXX
=================================
Issues:
I've found a way to get a Page's SubTotal, but the way I found requires this to be put in a field on the Page Footer Section.
This means that on the final page, the SubTotal will be at the top of the Page Footer and not neccessarily directly beneath the table.
So:
1. Is there a way to move the Page Footer so that its printed DIRECTLY under neath the Page Body instead of at the bottom of the Page?
2. If not, is there a way to have the SubTotal of each Page and a Final Page Total in the Page Body section.
Cheers.
I have a report with tablix. when tablix returns no rows Footer is coming all the way up . How to display the footer at the bottom of the page all time.
View 0 Replies View RelatedI have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies View RelatedHi all
I have a problem which I am really struggling with. I have a report that normally spreads over three pages. We have a list setup so that for each customer it picks up fees and expenses and displays it in sections. We have a page break after FEES so that expenses start on a new page. FEES and expenses are tables.
We need to have a page footer set for the bottom of the report but to appear on the first page only per customer. I.e. we do not want it showing on the EXPENSE pages. We have played with the IIF command but can not seem to print htis per customer only by using global variables.
=IIf(Globals!PageNumber=1,"(Please note 30 day invoice period)
The example above however only prints on the first page of the entire report. So if three customers appear then this will only appear for the first customer and I have a feeling I may not be able to link this to list.
If I can not use a page break and enter this into the list then I have a problem with the text field moving up and down depending on the size of the FEE section. For example if 5 fees are brought back then the text field will be lower then a customer that has only 2 fees.
I after a solution that can either allow my page fotter to appear every time a new customer appears on a page and hiddern for the sub sheets. Or the ability to allow my text field to start at a fixed position on my report. Has anyone had a similar issue.
thank you
Michael
Is it possible to force the content of the page footer to always display at the bottom of a report? I have a report that shows customer orders. It has its interactive height set to 5 inches. There is one customer order per report page. Most of the reports don't require 5 vertical inches (but some do).
How can I make sure that the stuff in the page footer (date, page number, etc.) always gets rendered in the same position for each report? Currently, the page footer follows the last detail line so the footer information sometimes is only midway down the report page.
Thanks.
BCB
How do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies View Relatedhi i am very concerned about this problem in my report.
to solve this problem i increased the height of page footer,blank page vanishes but the page footer is not printing on every page,it is only printing on 1 st page .
i am having probelm because the records from the dataset are more than the page limit , page break is there but no footer is printing on the second page only blank space is there.
can u please help me out from this problem??
can i use 'page number' and 'total pages' outside the page header and page footer?
View 1 Replies View RelatedI have seen some forums on SSRS page footer which is data bound.
The procedure is as follow:
a hidden text box is put into the body of the page...which can be data bound..
than a textbox is placed in the footer, which is linked to the hidden text box in
the body. This is a good solution to this problem.. but the is 1 major problem I am
facing. I render the report to PDF. But the result is that the databound footer
shows up only on the last page. I need it to be seen on all the pages..
Can someone tell me how to solve this problem?
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
I am unclear if SSRS can handle this. We are using SSRS 2005 for a variety of things for a billing system; one of them being actual bill generation. The bills are generally one page long, but in rare exceptions can be multiplie pages. They end up being printed onto perforated paper at around the 8 inch mark, and we basically want to put a page footer there that is the "bill stub"... a section that summarizes the bill that they rip off and return with payment.
So, I guess the general problem is that I have a want to put a section of content at a specific place at the bottom of one and only one page (the first page would be preferrable, but the last page is also acceptable), in the middle of a report that has a table of bill line items of an indeterminate height.
I went down paths of looking at PageFooter, since it is generally the idea I am after, but I can't find a way to only show it on one page... on a 4 page bill, it always wants to print on page 2 AND 3 no matter what I do.
Thanks for any help that you can provide.
Michael
Is there anyway to set-up the page footer of a report to print on the first page only?
I was going to try an IIF statement, but realized there is no visibility style property associated with the Page Footer section.
If you have any ideas, let me know.
Thank you,
T.J.
Hi everybody!
In my report i need to have one of my data set's fields in page footer! but i can't
Please help me.
Hi.
I wote a report including body and pagefooter, On body I put a list & the list inside had a table. Now when I print out this report, printer will printout 2 pages. (correct report is 1 page) , and on the second page, it had page footer only. If I turn off this page footer on next page, printer still
printout a blank page that's i don't need. Does anybody can help me fix this problem?
Thanks
Hi,
I created a report with a page footer. In the properties of the pagefooter I did set PrintonFirstPage to FALSE en PrintOnLastPage to TRUE.
If I run my report which takes 5 pages then on the first page the pagefooter is not visible. So that is OK.
But from the 2nd page until the las one the PageFooter is visible and I want it only on the very last page.
What do I do wrong or how can I solve this?
Carlo
Hi guys,
my report footer displays at after the last row of the table(can be middle of the table)
how do you get the footer to appear at the end of each page?
thanks
Sonny
Hi!
First of all...sorry for my english.
I have a table that I want to show only 3 times in every page. If the dataset return to me 7 results i want to show The first 3 in page 1, the second 3 in page 2, the last in page 3... only 3 in every page.
I created that function:
Function saltoCada(ByVal n As Integer)
If (iCount < n) Then
iCount = iCount + 1
Else
iCount = 1
End If
Return iCount
End Function
I created a group in a table with that expression: =Code.saltoCada(3) and then add a page break at end in the group.
Is that the way to do this?It doesn't work.. Any ideas?
Thanks!
Hello anyone!!!!
Anybody knows if exists some way to put a dataset field into the page footer???, or if not, tell me if there is a way to do a €œsimilar€? of footer, cuz I need put information in the bottom of the report, but just in the last page, and need to left the space of this information in the another pages.
Any suggest is welcome, tanks!!!!!
Dear all,
I am having a problem with the footer in my SQL Reporting Services project. I am trying to print a disclaimer in a text box on the last page in the footer. I can get the text box in the footer just fine but as the disclaimer is quite a lengthly multi line text string the footer has to be enlarged in order to fit the whole text box in.
This causes a problem on all the other pages where even though the footer is not displayed on pages before the last page it still takes up space stopping other data from being displayed where the footer would normally be.
Is there a way for me to set the footer size to a default value all all pages except the last page? I just want to enlarge the footer to about 1.5" on the last page to print my disclaimer without effecting the other pages layout.
Many thanks in advance,
Trevor Keast
The problem I am running into is I want to make sure the header/footer is on each next page,if the grade report goes more than 1 page (so pages aren't separated from each other or mixed up).
I could put a textfield as a footer at the bottom the list control but that would just appear at whatever length page 2 ended up being (basically you could have a "footer" at mid-page if the whole list only took up 1.5 pages).
Thanks & Rgds
Neelesh Gour
Mail:neeleshgour@gmail.com