Page File Warning Message
Jun 27, 2001
We are seeing the following error message in our SQL logs and was hoping for some advice.
"Warning: the available page file space has dropped below 4 MB"
To fix the problem we thought we should increase our paging file size for our virtual memory on the server. The recommended allocation was 3083 MB and previously we were using less than the recommended amount so we allocated 7167 MB (the max we were allowed). Do you see any problems with this or have any recommendations?
View 4 Replies
ADVERTISEMENT
Feb 25, 2004
I use VB 6.0 with ADO 2.6 to access an SQL-server.
I know that the table I wish to create generates this warning.
But from today ( without any changes to the SQL-server ) , this warning is reported as an error to the client instead of continuing.
So my error trap routine traps this as an error now.
I have a workaround that I would to avoid and that's reinstalling the SQL-server ( Only the MSSQL ).
Does anybody know a better solution.
PS : Changing the table structure is not possible in this case.
Thnx in advance,
Sven Peeters
Belgium
View 2 Replies
View Related
Jul 23, 2005
Hi,I have a few create table statements which create temporary tablesthat has row definitions which exceeds the 8060 size limit, this causesa warning message being generated (Message 1708).Is there a way I can disable/avoid the warning message from beingprinted ?Thanks,joe
View 2 Replies
View Related
Jun 7, 2001
Hi
Can anyone tell me what this warning message in the Quotes below...
I get this on one of our servers every 15 minutes in the event Viewer..
Here is the message in the event Viewer..
"Replication of license information failed because the License Logging Service on server PSNJRPDC could not be contacted."
Thanks All,
Venu
View 1 Replies
View Related
Apr 9, 2008
I'm getting the following error message
[rsNonAggregateInMatrixCell] The Value expression for the textbox €˜IMAGE_TOTAL_1€™ references a field outside an aggregate function. Value expressions in matrix cells should be aggregates, to allow for subtotaling.
the cell it is refering to is in the data area of a matrix.
The value expression is =sum(Fields!IMAGE_TOTAL.Value,"MAIN")
this cell also has a navigation set to "job to a report"
When i take out the navigation the warning messages go away.
Is there an issue with using navigation link on a textbox with an aggregate in it?
ps - everything runs fine I just get a warning message.
View 3 Replies
View Related
May 10, 2007
"Warning: Null value is eliminated by an aggregate or other SET operation."
i keep having this message while having some joint statement.
is there a way to prevent this or even hide this message?
View 3 Replies
View Related
Jul 9, 2006
Hi there,
I have only this warning message during the System Configuration Check:
ASP.Net Version Registration Requirement (Warning)
Messages
ASP.Net Version Registration Requirement
64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).
Does this mean that I can't install Reporting Services or should I pay no attention to it and continue to install?
I'm running on Windows 64-bit Pro. edition.
Thanks,
Eric
View 24 Replies
View Related
May 1, 2007
Hello,
I have been trying to drill down to the cause for this event log message:
"The configuration of the AdminConnectionTCP protocol in the SQL instance
SQLEXPRESS is not valid."
It is reported from the SQLBrowser service as a warning when the service
starts. I have tried starting SQLBrowser.exe with -c flag, but the output reveals no
errors. I have seen this error on three computers. Two are running SQL 2000, 2005
and Express. One was only running Express, but still this message.
I then looked into the log for the SQL Express server itself. It shows this
message on startup:
"Dedicated administrator connection support was not started because it is
not available on this edition of SQL Server. This is an informational message
only. No user action is required."
Now, it appears to me that these two messages may relate to the same
"error" (or rather behaviour by design). So, can anyone confirm that the
warning in the event log from the SQL Browser service occurs becuase of that
the SQL Express edition doesn't allow any "AdminConnection", but the SQL
Browser service isn't aware of that SQL Express edition shouldn't support that, and
reports it as a warning (implying that we can't do much about this warning)?
Thanks for any input on this issue!
View 5 Replies
View Related
Jul 11, 2007
How to solve the problem of Warning message 'Fail Components' and 'redirect row' when doing text mining?
thanks
View 1 Replies
View Related
Apr 3, 2007
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
View 8 Replies
View Related
Dec 26, 2006
I am using vb.net. and sql server 2005 reporting services. But the report in question uses the local report functionality.
I am writing a credit card processor that prints a slip at the end of the transaction. There is an annoying message form that pops up on the screen stating that it is "Printing Page 1 of Document" . It seems to be beyond my reach. Its position is the typical windows auto positioning (ala cascade). I dont want the user to see it.
How do i surpress this printing message? Is it embedded in the printer driver or spooler services? Is it surpressable from the reporting services local report configuration?
Thanx
View 1 Replies
View Related
Feb 5, 2008
hi,
Can you please block this error below..
Open File - Security Warning. The publisher could not be verified. Are you sure you want to run this software?
View 4 Replies
View Related
Nov 16, 2006
The publisher could not be verified. Are you sure you want to run this software?This is my first SSIS package and the first for my employer. Under DTS we run some overnight tasks that bin with a .Net console application that downloads data. Several of these run in parallel.
Looked to me that the Execute Process Task was a good fit for the requirements. When I executed the step, the program did begin to execute in that a DOS window opened. But when, I clicked the run button on the warning dialog, the task step ended.
Questions:
1.- How to tell the Execute Process Task not to open the Security Warning dialog?
2.- Have you any suggestions about my approach?
Thanks,
IanO
View 14 Replies
View Related
Apr 4, 2007
I have a SQL job that calls a command file that executes a vbscript. I am getting "Open File - Security Warning" whenever the command file calls the vbs as it goes through a loop. Is there a way to suppress the warning dialog box?
Thanks!!
View 1 Replies
View Related
May 19, 2008
Hi all,
I am running SQL 2000 Enterprise SP4 on Windows Server 2003 Standard SP2
I am getting the follow error message:
Table error: Page (1:53888) allocated to object ID 546100986, index ID 0 was not seen. Page may be invalid or have incorrect object ID information in its header.
I check the hardware and didn't see any issues.
I run the following command to check the actual page:
dbcc traceon (3604)
dbcc PAGE ([Statistics], 1, 53888, 1)
Here is the output:
PAGE: (1:53888)
---------------
BUFFER:
-------
BUF @0x015D7A00
---------------
bpage = 0x73F40000 bhash = 0x00000000 bpageno = (1:53888)
bdbid = 19 breferences = 1 bstat = 0x9
bspin = 0 bnext = 0x00000000
PAGE HEADER:
------------
Page @0x73F40000
----------------
m_pageId = (1:53888) m_headerVersion = 1 m_type = 1
m_typeFlagBits = 0x0 m_level = 0 m_flagBits = 0x0
m_objId = 402100473 m_indexId = 0 m_prevPage = (1:50311)
m_nextPage = (1:53890) pminlen = 579 m_slotCnt = 0
m_freeCnt = 8096 m_freeData = 7688 m_reservedCnt = 0
m_lsn = (3643:60824:142) m_xactReserved = 0 m_xdesId = (0:26032361)
m_ghostRecCnt = 0 m_tornBits = 67108866
Allocation Status
-----------------
GAM (1:2) = ALLOCATED SGAM (1:3) = NOT ALLOCATED
PFS (1:48528) = 0x40 ALLOCATED 0_PCT_FULL DIFF (1:6) = NOT CHANGED
ML (1:7) = NOT MIN_LOGGED
DATA:
-----
OFFSET TABLE:
-------------
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Please let me know what else I can do or check in order to eliminate this error.
Thank you,
T.
View 2 Replies
View Related
Sep 28, 2015
I am running a DBCC SHRINKFILE on "FILE1" of a database (it has fileid = 1)...intent is to remove 70GB of file space:
DBCC SHRINKFILE (N'FILE1' , 400000).
For the SPID that's doing the shrink, In activity monitor you can see:
Waittype: PAGEIOLATCH_EX on resource: 9:3:15411328
(the DB is dbid=9)
But why does it need a page from fileid=3? Are there page dependencies between files that prevent moving a page within a given file? Does it need that fileid3 page to come along?
Its just sitting there in the SUSPENDED state for the last hour....I am going to leave it another 5 hours or so before cancelling.
The dm_exec_requests has an estimated percent complete at 83% and holding....not sure if I can believe that.
View 6 Replies
View Related
Dec 1, 2007
I built my package on my development machine with a config file at a given location. Let's say:-
C:DevelopmentdtsConfig.xml
Then I shipped my package to the Production machine and ran my package (in a .bat file) as follows:-
DTExec /FILE "C:ProductionPackage.dtsx" /CONFIGFILE "C:ProductiondtsConfig.xml"
But I get the following output:-
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 10:01:27 PM
Warning: 2007-11-30 22:01:29.52
Code: 0x80012012
Source: Package
Description: The configuration file name "C:DevelopmentdtsConfig.xml" is not valid. Check the configuration file name.
End Warning
...
But then it goes on to read values from my Production config file.
How can I stop the annoying warning about my Development config file-path (which doesn't exist on the Production machine)
Thanks
View 6 Replies
View Related
Jan 15, 2007
I have a flat file data source and SQL Server destination data flow. Only a subset of columns from the source are mapped to the destination. During execution SSIS returns DTS pipline warnings for every unmapped source column. Is some kind of transformation the only way to get rid of these warnings?
Also this data flow subsequently returns an error: [SQL Server Destination [1293]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT ' could not be opened. Operating system error code 2(The system cannot find the file specified.). Make sure you are accessing a local server via Windows security."
I'm researching this error, but if anyone is familiar with it your advice would be appreciated. Thanks.
View 10 Replies
View Related
Apr 14, 2008
HelloI'm using FromView to Insert record into a DB. My SP checks for the existence and returns -1 if record already exists. I know that my SP returns -1 but how do I capture that into FormView and display error message to the user? All I get is the "Agreement was created" regardless of what SP returns.Your help is appreciated.MarkHere is the code I'm using:Protected Sub OnInserted(sender As Object, e As System.Web.UI.WebControls.SqlDataSourceStatusEventArgs) Dim retValParam As New SqlParameter("@RETURN_VALUE", SqlDbType.Int) retValParam.Direction = ParameterDirection.ReturnValue Dim valParam As Integer = Convert.ToInt32(retValParam.Value) If valParam = -1 Then lblMessage.Text = "The Account ID is not valid" Else if valParam = -2 then lblMessage.Text = "Agreement ID already exists" else lblMessage.Text = "Agreement was created" End If end if End Suband parts of ASPX page with FromView: InsertCommand="spNew_Agreement" OnInserted="OnInserted"> <FilterParameters> <asp:ControlParameter Name="Acct_Name" ControlID="txtAcct_Name" /> </FilterParameters> <InsertParameters> <asp:Parameter Name="acct_id" Type="string" /> <asp:Parameter Name="agreement_id" Type="string" /> <asp:Parameter Name="return_value" Type="int32" Direction="ReturnValue" /> </InsertParameters>
View 10 Replies
View Related
Jan 27, 2004
Hi
I would like to know if there is some way to find a row in a table by the RID that sp_lock returns :
for example
"SELECT * FROM Authors (UPDLOCK) WHERE name = 'John'"
sp_lock returns the locked row id :
2:328:11 (file#page#slot on page)
How do i get this row???
Thanks
PB
View 3 Replies
View Related
Sep 26, 2014
Our Information Assurance (IA) office wants us to add a warning message popup box to our SQL 2012 SSRS server.The purpose is to force users to acknowledge the warning box popup before they get into to the SSRS main page.The message box would contain text stating Privacy Act information and or DoD monitoring consent...
View 1 Replies
View Related
Dec 28, 2007
Warning: 0x80019002 at STAGING: The Execution method succeeded, but the number of errors raised (14) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
i got this error in my ssis package, where i'm trying to export flat file data into oledb destination,
can anyone help me to fix this issue!!!
What i've done?
1. Data Flow Task
a. po.txt flat file Source
b. Derived column
c. Oledb destination
a. pend.txt Flat file Source
b. Derived column
c. Oledb destination
a. invoice.txt Flat file Source
b. Derived column
c. Oledb destination
i did three flows in a single data flow task; among that one flow is running (po.txt flow) the rest are returned with Red Box filled error, and i capture the error and pasted there!!
the full error message is...... what i got in my output window is follows
i need some guidence to solve this issue, please let me know if you know about this stuff.
Information: 0x40016041 at STAGING: The package is attempting to configure from the XML file "staging.dtsConfig".
Warning: 0x80012014 at STAGING: The configuration file "staging.dtsConfig" cannot be found. Check the directory and file name.
Warning: 0x80012059 at STAGING: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed.
SSIS package "STAGING.dtsx" starting.
Information: 0x4004300A at Staging Table Loading Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Description" (3223) on output "Flat File Source Output" (3161) and component "Invoice Raised Flat File Source" (3160) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Project Number" (3080) on output "Flat File Source Output" (3063) and component "Pending Files Flat File Source" (3062) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at Staging Table Loading Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Description" (3223) on output "Flat File Source Output" (3161) and component "Invoice Raised Flat File Source" (3160) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Project Number" (3080) on output "Flat File Source Output" (3063) and component "Pending Files Flat File Source" (3062) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at Staging Table Loading Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Staging Table Loading Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" has started.
Information: 0x402090DC at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" has started.
Information: 0x402090DC at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The processing of file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" has started.
Information: 0x4004300C at Staging Table Loading Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC02020A1 at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: Data conversion failed. The data conversion for column "Description" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC02020A1 at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: Data conversion failed. The data conversion for column "Event Description" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Information: 0x402090DE at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The total number of data rows processed for file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" is 76.
Error: 0xC020902A at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The "output column "Event Description" (3095)" failed because truncation occurred, and the truncation row disposition on "output column "Event Description" (3095)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC020902A at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The "output column "Description" (3223)" failed because truncation occurred, and the truncation row disposition on "output column "Description" (3223)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC0202092 at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: An error occurred while processing file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" on data row 10.
Error: 0xC0202092 at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: An error occurred while processing file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" on data row 5.
Error: 0xC0047038 at Staging Table Loading Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Pending Files Flat File Source" (3062) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047038 at Staging Table Loading Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Invoice Raised Flat File Source" (3160) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "SourceThread2" has exited with error code 0xC0047038.
Error: 0xC0047039 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0xC0047039.
Information: 0x402090DF at Staging Table Loading Data Flow Task, PO_PENDING_STG OLE DB Destination [587]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, PO_PENDING_STG OLE DB Destination [587]: The final commit for the data insertion has ended.
Information: 0x40043008 at Staging Table Loading Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at Staging Table Loading Data Flow Task, INVOICE_STG OLE DB Destination [247]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, INVOICE_STG OLE DB Destination [247]: The final commit for the data insertion has ended.
Information: 0x402090DF at Staging Table Loading Data Flow Task, OLE DB Destination [933]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, OLE DB Destination [933]: The final commit for the data insertion has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The processing of file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" has ended.
Information: 0x40043009 at Staging Table Loading Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "PO_PENDING_STG OLE DB Destination" (587)" wrote 75 rows.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (933)" wrote 0 rows.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "INVOICE_STG OLE DB Destination" (247)" wrote 0 rows.
Task failed: Staging Table Loading Data Flow Task
Warning: 0x80019002 at STAGING: The Execution method succeeded, but the number of errors raised (14) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "STAGING.dtsx" finished: Failure.
The program '[2532] STAGING.dtsx: DTS' has exited with code 0 (0x0).
View 6 Replies
View Related
Aug 2, 2007
I hope someone can help me with this - I started receiving this error message in the past month or so when I open a csv report and save it as an Excel file in a folder I use on my VPN and in My Documents. It does not show up when I save it to my Desk Top.
I have Microsoft Office Student and Teacher and Office XP Professional installed on my notebook. I tried to uninstall Office XP and it would not let me. Something about a "patch could not be opened......"
The error message is as follows:
Header: .NET-BroadcastEventWindow.2.0.0.0.33c0d.0.EXCEL.EXE-Application Error
Excel error message The instruction at 0x0beab865 referenced memory at "0x00000008"
The memory could not be "read".
Click ok to terminate the program.
I hope someone could please help me with this I received 60 - 80 csv files a week and everythime I save on I get this pop up message!
Thank you!
Leslie
View 1 Replies
View Related
Nov 11, 2015
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies
View Related
Mar 3, 2000
Can i send a file as the body of @message
in the extended sp xp_sendmail?
Pls help! thanks for any help.
View 2 Replies
View Related
Oct 3, 2006
I made a mistake in copying my database and somehow lost my file header. How do I recreate my file header without losing all the data in my database? Is there a way to undo my mistake?
Thanks
Debbie
View 1 Replies
View Related
Jun 23, 2004
Hi there,
I would like to know how can I run a SQL Server 2000 script file (*.sql) from an ASP.NET page. I don't wanna run it from the SQL Query Analyzer, but run it the page itself, I mean dynamically.
Is there any object, method, or whatever to do it?
Thanks in advance
View 15 Replies
View Related
Jun 17, 2007
Hi,
I have SQL Server 2005 running on Windows Server 2003 Standard Edition SP2.
The server has 3GB of physical memory and its PF size is fixed with a 2GB min and 4 GB max.
This server has only 1 database with maybe a max of about 10 concurrent db connections.
Everytime after a reboot or databse restart, the PF usage slowly grows and grows until the server locks up. It appears as though the server is not releasing the RAM after is uses it...
For example, right now, it is early in the morning and there is only 1 db connection but the PF usage is sitting at 1.87GB and slowly growing.
Has anyone ever had this issue before or does someone know how I can resolve this issue?
I would appreciate any help
Cheers
View 3 Replies
View Related
Oct 17, 2007
Hello Guys,
I need some help on a couple of issues, please.
We have a dedicated SQL W2003 SQL 2005 box with 32GB of RAM. Pagefile is set to 4GB, verified under System Properties. Under data loads, use of the system, etc, PF Usage goes up to 30GB. After the load is done, PF Usage goes to 28GB, not any lower. sqlserver.exe process is taking about 25GB of Mem Usage and VM Size.
First question is how come PF Usage shows 30GB, and maximum set under system properties is 4GB?
Also, would setting the page file to 1.5 X RAM (48GB) improve the system performance?
PF Usage is definitely extemely high, so do you have any recommendations on how to attack this problem?
I would appreciate any suggestions you may have. Thank you!
I am a developer, not an admin, so I am just trying to get some educated seggestions to the management and the DBA on how to improve the performance of the box.
View 6 Replies
View Related
Oct 18, 2005
I'm using the import wizard to create a new table from a flat file source. The table gets created but no data gets copied. What's wrong? Here's the report:
View 87 Replies
View Related
Jan 29, 2007
Hello,
I have read previous threads on this, still not working.
New installation of SQL Server 2005 on a Windows Server 2003 box. I have installed SP1 on both the server & the client, do I have to re-create the package?
Thanks in advance,
Dave
View 5 Replies
View Related
Mar 12, 2004
Hi,
like subject, is it possible?
bye
View 3 Replies
View Related
Jul 26, 2006
Check SQLServer 2005 feature comparison Express doesn't even have Integration Services (DTS successor)
View 3 Replies
View Related
