Hi,
I have a problem with paging in my report. My report is quite simple, I have a table with two grouping levels. Paging is not appearing besides there is a lot of rows displayed.
When I change the report to use only one grouping level, the paging works fine. Is paging being calculated on the first grouping level ? I have about 10 to 20 rows at the first level but about 1500 rows on the second one.
Any help will be appreciated.
Hi,
My requirement is that when i show data the vertical scroll bar should be disabled.ie,whatever data can be accomodated in a screen should be shown and the rest should go to next page.
I have tried restricting the no of rows shown to 20 but this wont work always as the font size may change.I had used the follwing for this:
<GroupExpression>=Ceiling(RowNumber(Nothing)/20)</GroupExpression>
is there any other way???
please help...
Hi,
I have recently moved into ms sql from mysql and having problems with
finding a query to help paginate my search results. In mysql I would
use:
SELECT * FROM tablename WHERE something = something LIMIT 0,10
what would a similar query be in sql server?
From what I have experienced so far I know this is going to be a big query!
Thanks in advance
Steve
I have a report which consists of a list item, in which is a rectangle containing a header (as a subreport, but I think that's not relevant) and a subreport. The aforementioned rectangle is specified to include a pagebreak after each occurrence, but that pagebreak is not working as expected.
When I run the report I get 1 subreport on the first page, and exactly two on each subsequent page. Other than the pagination, I am getting very close to what I want. It's too bad that the subreport's pagination is ignored, but I can live with that for now.
Things I've already tried:
The report's pageSize and interactiveSize are both set to landscape
The subreport's report's pageSize and interactiveSize are both set to the actual size that the subreport takes up on the main report (which is ignored anyway)
The list does not have any of the page break options selected.
Any Ideas?
Hi,
I have found the follwing article on internet. This article states two keywords LIMIT and OFFSET using which we can implement the pagination type of functionality in MySQL or PostgreeSQL,
http://www.petefreitag.com/item/451.cfm
But is there any way using which we can implement pagination kind of functionality in SQL.
LIke first time if i set 0 thenm it fetch the records from 1-10 then if i set 10 then it will fetch the next set of records from 11-20 like this,
Can we do it in SQL?????
I'm working on a website where we're using .Net web services to feed data to a Flash front-end. The site will have a comments section and we want to display 15 or so comments per page with 'back' and 'next' functionalitiy. We'd also like to show the number of pages of comments and highlight the page they're on. The standard stuff that datagrids do so well. How can this be accomplished without a datagrid? There's a good page that explains a number of ways to do this using classic ASP. Some of the solutions they implement I can most likely use with .Net.http://www.aspfaq.com/show.asp?id=2120But I wanted to ask the community. How to paginate without a recordset? Sql Server 2000 back-end, ASP.NET 1.xThanks.
View 3 Replies View RelatedHi
I'm still quite new to MSSQL so excuse the trivial questions.
I've already tried searching through the forums on pagination as im sure its a big subject but couldn't find the answers i'm after.
I'm using MSSQL 2000 and asp .net 2.0 and basically need to paginate my results. My database contains roughly 250,000 rows of data, and one query would approximately return 30 results at the most. I would want to have 5 results per page.
I'm starting from scratch so was wondering what technique i could use. I can't use OFFSET as thats MySQL, is there an equivalent?
I've heard mixed opinions on Cursors, but so far thats the only way i can see at the moment! :S
thanks
I am a PHP programmer for a small startup. We are storing person records and our MS SQL Server 2000 database has grown to the point where we wish to paginate the data before returning it to my PHP scripts.
I was wondering if anyone has any recommendations on an optimal way to manage this given the following requirements.
- Data must return only X number of rows at a time (user configurable).
- Must be able to search by several diffent criteria (name, date, birthday, location, ...)
Also, I was wondering if it is possible to return the total number of existant rows of data as the first row of a MSSQL procedure.
Let me know what you think about the following code:DECLARE @MaxIdValue intDECLARE @MaxSortFieldValue nvarchar(50)SELECT TOP 1 @MaxIdValue = [id], @MaxSortFieldValue = [SortField]FROM (SELECT TOP PageNumber*RowsPerPage [id], [SortField]FROM MyTableWHERE (FilterCondition) ORDER BY [SortField], [id]) TORDER BY [SortField] DESC, [id] DESCSELECT TOP RowsPerPage * FROM MyTableWHERE ([SortField] >= @MaxSortFieldValue) AND (([id] > @MaxIdValue) OR([SortField] <> @MaxSortFieldValue)) AND (FilterCondition)ORDER BY [SortField], [id]This is a dynamic SQL and it should be easily fixable.PageNumber, RowsPerPage, FilterCondition and SortField are going to bethe variables and will be based on the user's searchcondition/criteria.-----------------------------Thanks for you attention.
View 2 Replies View Related
I changed a stored procedure that does pagination from the top style to the
bottom style - mainly to avoid errors in differences in the 2 queries (count
and select) and for conciseness. The performance on a large table for the
bottom query was amazingly bad. The query plan is very different too. It
was about 25 times slower on a 1 million row table. I am familiar with
other pagination techniques (temp tables with identity, TOP-TOP, etc), but
is there a way to use the ROW_NUMBER function AND get a count of records
back in a single query with decent performance?
-- -------------------------------------------------------------
USE NorthWind
DECLARE @cnt Int
SELECT @cnt = Count(*) FROM Customers
;WITH Cust AS
(
SELECT CompanyName, ContactName,
ROW_NUMBER() OVER (ORDER BY ContactName) AS rownum
FROM Customers
)
SELECT *, @cnt AS TRowCount
FROM Cust
WHERE rownum > 10
AND rownum <= 20
ORDER BY rownum
-- -------------------------------------------------------------
-- -------------------------------------------------------------
USE NorthWind
;WITH Cust AS
(
SELECT CompanyName, ContactName,
ROW_NUMBER() OVER (ORDER BY ContactName) AS rownum,
Count(*) OVER() AS TRowCount
FROM Customers
)
SELECT *
FROM Cust
WHERE rownum > 10
AND rownum <= 20
ORDER BY rownum
-- -------------------------------------------------------------
Hello,
We are migrating from VB6/MySQL to VB6/MS SQL.
The application retrieves limited records for paginated results.
This way we can access large databases, but only return rows for one screen.
For example:
Select row 1 - 10, then 11 - 20 then 21 to 30 etc.
With MySQL we can use LIMIT and OFFSET and it works great.
MySQL
SELECT <columns> FROM <tables> [WHERE <condition>] [ORDER BY <columns>]
[LIMIT [offset,]howmany>]
Does anybody know how we can do something similar with MS SQL?
Any feedback is appreciated!
Thank you,
Edi
I have a need to perform pagination while using dynamic sorting. Asan exmaple -SELECT TOP(10) * FROM (SELECTTextColumn,DecimalColumn,ROW_NUMER() OVER (ORDER BYCASE @xWHEN 1 THEN TextColumnWHEN 2 THEN DecimalColumnENDDESC) AS SortOrderFROM Table1) AS Results WHERE SortOrder ( 10 ) ORDER BY SortOrderThis is obviously just some sample but an error is given because thedata type of the 2 columns used in the order by are different. Itworks if I cast DecimalColumn to match the textcolumn but then thesorting is wrong. Is there a way to do this in a single query with 2different data types?Thanks for your help.
View 2 Replies View RelatedI want to build a system that will have about 1 million rows in atable in sql server database.I am using this for a web application andaccessing it via JDBC type 4 driver.But display 20 records at a timeonly using pagination(as in google).What will be the best way to goabout this.
View 1 Replies View RelatedI would like to know how to show all the records returned (upto 1000) in one single page on a web browser. I am able to get the required report in IE but in case of Firefox it hangs.
Did some test and found that Firefox is able to render a report of upto max 300 records in a single page without getting hanged but report is coming very slow. While you scroll the scroll bar it€™s moving with Jerks. with 200 records in a single page is not getting hanged but report is faster than 300 records display. But by 500 records Firefox hangs. I understand it might be depending on the hardware also but am not sure.
Can anybody give me a good solution to display upto 1000 records in a single page or if its a limitation, where can i get the documentation of it.
Thanks and regards
Niaz Khan
Hi,
We have developed few reports displaying data using chart layout. In the Data tab, we have specified MDX query that will return top 10 records.
But now, instead of restricting to just top 10 records, we would like to display all records and go in for pagination.
Is there some setting in the chart properties, where in I can display the first n records in first page, and the next n records( if available) in the next page and so on?
Can I specify the value of n somewhere in the propeties?
I read through many posts regarding pagination but those couldn't help me much.
Please help me in solving this problem.
Any help would be appreciated.
Thanks in advance!
I've got the following query:
WITH OrderedResults AS (SELECT some_table.*, ROW_NUMBER() OVER (ORDER BY some_field) as RowNumber FROM some_table)
SELECT TOP 10 *
FROM OrderedResults
WHERE RowNumber > 10;
which works well for returning "paginated" recordsets. But when it comes to displaying "page" links and next and previous links, I need a total count of records found... something along the lines of the MySQL CALC_FOUND_ROWS feature...
Is there some built-in MSSQL feature I can use for this, or do I have to do a SELECT count(*) FROM some_table to get this data?
Any advice is appreciated
I am using MS SQL 2000 server db.
I want a parameterised query for pagination support. I want to fetch a records in following order 1-100 then 100-200 , 200- 300 & so on in the format of "First Previous Next Last"
i.e just want to fetch 100 records only per request
How can i do it with MS SQL 2000 server? any suggesions?
Thanks in advance...
I need sql script where i will pass startindex, endindex and sortcol and order then query return result accordingly. it would be better if query looks small and dynamic.
Here one sample of dynamic sql but there case is used which is not require.
DECLARE @sql NVARCHAR(MAX)
SET @sql = ';WITH cte as(SELECT *,
ROW_NUMBER() OVER
(ORDER BY ' + CASE (@SortColumn + ':' + @SortDirection)
[Code] ...
My requirement is that i will create a sp where i will pass start index and end index and sort column,sort order and filter means where clause and sp will generate and execute dynamic sql and return data. i need a sample of that kind of sp.
Hi,
I use an embedded ReportViewer control as a LocalReport in a web form. The report displays the results in four pages and I need to display them all in one page (without any pagination). Is there a way to disable pagination? Also, what do I need to do to show the print button in toolbar?
Thanks,
Adarsh
I know people use ROW_NUMBER() function to do the pagination but my below two query is bit complex. Sohow to use pagination there ? I used ROW_NUMBER() OVER(ORDER BY IsNull(A.OEReference, B.OEReference) ASC) as Line in one but not sure am i right or wrong.
IF IsNull(@GroupID,'') = ''
SELECT IsNull(PartGroupName, 'UnMapped') AS PartGroupName,
CASE IsNull(PartGroupName, '')
WHEN '' THEN ''
ELSE IsNull(IsNull(K.GroupID, IsNull(C.PartGroupID,'')),'')
END AS PartGroupID,
[Code] .....
I have simplified my question. For complex presentations of data it appears to me that the best practice is to put complicated code into a stored procedure that will make most of the formatting decisions, and keep the SSRS work in the report designer as simple as possible.
The following text is from the original question. I have an SSRS report which contains 2 tablixes. Each tablix has a different dataset coming from separate stored procedures. Currently, everything works good; the user selects one customer (customer A) to display the one page report for; data for customer A for the 1st tablix may contain 7 rows, and data for customer A for the 2nd tablix may contain 4 rows. User prints report, then chooses customer B which may have a different number of rows for each tablix.
I would like to give the user the option to select "All Customers" to display the report for all customers, one page per customer and I currently do not perceive that there is a way to paginate the report; one page per customer. When I pass in "All Customers" to the 2 stored procedures I get all of the correct data back; sorted by customer; so I can do some sort of page break on a row group on the customer name column, but I have 2 tablixes of data.
I have a tried two different reports one with table and the other without The last textbox in both reports contains enough text which should fill half of first page and half of second page. In both reports the print preview and export to PDF keeps the first page blank and puts all the data in the second page. It appears that the textbox control doesn't know when to place a pagebreak when in print preview and export to PDF. The rdl file has no pagebreaks defined anywhere. Thanks in advance for your help!
Hi Anyone,
I have a drilldown report includes three groups. I add the last group for pagination. But the details in each page doesn't accord to I specified and the detail record number is different in different page.
Another issue is the interactive sort always sort in the first page scope. I set the data region or grouping to the table, and evaluate expression scrope to Detail scope.
Anyone has experience on that?
Thanks a lot
My table contains 1000 records,
I need to know the total record count with the below paging query
SELECT EmpName,Place
FROM EmplyeeDetails ORDER BY Place
OFFSET 10 ROWS FETCH NEXT 10 ROWS ONLY;
How to get?
Hi Friends,
There is a one header in the report, when I publish and hit the report in IE(internet explor) the header appears fine on first page when I go to next page this header does not appear.
But in mozilla the header is visible on every page of the report. so it is working fine in mozilla.
I donot why it is happening?
Your help is highly appreciated.
Thanks
Novin
hi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
I am writing a pgm that attaches to a SQL Server database. I have an Add stored procedure and an Update stored procedure. The two are almost identical, except for a couple parameters. However, the Add function works and the Update does not. Can anyone see why? I can't seem to find what the problem is...
This was my test:
Dim cmd As New SqlCommand("pContact_Update", cn)
'Dim cmd As New SqlCommand("pContact_Add", cn)
Try
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@UserId", SqlDbType.VarChar).Value = UserId
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text
[...etc more parameters...]
cmd.Parameters.Add("@Id", SqlDbType.VarChar).Value = ContactId
cn.Open()
cmd.ExecuteNonQuery()
Label1.Text = "done"
cn.Close()
Catch ex As Exception
Label1.Text = ex.Message
End Try
When I use the Add procedure, a record is added correctly and I receive the "done" message. When I use the Update procedure, the record is not updated, but I still receive the "done" message.
I have looked at the stored procedures and the syntax is correct according to SQL Server.
Please I would appreciate any advice...
Original suggestion for my problem was - Select * from TableA where ID not in ( Select ID from TableB)
When I run the query below using the IN operator I get 227 records returned but when I use NOT IN I get zero records when I expect well over 10,000. What am I missing?
using SQL 2000 server
SELECT LinksInfo.L_ID, LinksInfo.C_ID, Companies.C_CompanyName, Companies.C_Email, Companies.C_CompanyEmailFROM LinksInfo INNER JOIN Companies ON LinksInfo.C_ID = Companies.C_IDWHERE (LinksInfo.L_ID IN (SELECT ZL_ID FROM Location_Zip))
ZL_ID is not a primary key in Location_Zip
Hello again,
I think im missing something here, i just cant find out what it is.
I have a temp table:
CREATE TABLE #tempSearch(tempID BIGINT IDENTITY(1,1) PRIMARY KEY,username NVARCHAR(20) COLLATE Finnish_Swedish_CI_AS,lastlogin DATETIME,signupdate DATETIME)
Now i am trying to retrieve some data for each user that is inside this tempSearch list and have an id over xxx (xxx = the value of the parameter @first_id):
SELECT @sql = 'SELECT profile_publicinfo.username, profile_publicinfo.gender, profile_publicinfo.signupdate, profile_profilephoto.imageurl, profile_profilephoto.alttext, settings_username.color, profile_publicinfo.lastloginFROM #tempSearch INNER JOIN dbo.profile_publicinfo ON profile_publicinfo.username = #tempSearch.usernameINNER JOIN dbo.settings_privateinfo ON settings_privateinfo.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.profile_coolfacts ON profile_coolfacts.username = profile_publicinfo.username FULL OUTER JOIN dbo.profile_profilephoto ON profile_profilephoto.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.settings_username ON settings_username.username = profile_publicinfo.usernameWHERE (profile_publicinfo.username IN (SELECT username FROM #tempSearch))AND #tempSearch.tempID >= @first_id'
SELECT @paramlist = '@first_id int'EXEC sp_executesql @sql, @paramlist, @first_id
I need to get the tempID from the tempSearch table in order to compare it with @first_id
When i run this i get the same username repeated like 30 times then it moves over to the next, when i debug the #tempSearch it looks fine, just the users that are suppose to be there.
Hi
I think I have installed MSDE sucessfully. The new servie is running, but how can I test ifit is working? Can I place my files anywhere on the system?
All help appreciated
I am using the following C#...
SQLXMLBULKLOADLib.SQLXMLBulkLoad3Class loader = new SQLXMLBULKLOADLib.SQLXMLBulkLoad3Class();
loader.ConnectionString = "PROVIDER=SQLOLEDB; Server=(local); database=TestDB; user id=test; password=password";
loader.ErrorLogFile = "C:log.txt";
loader.SchemaGen = true;
loader.SGDropTables = true;
loader.CheckConstraints = true;
loader.Execute(
"C:xsd.xsd"/* this file below */,
"C:xml.xml"
);
To generate tables in the database using the following xml schema...
(file: xsd.xsd...)
My problems is that it doesn't generate the tables and I am following the SQLXML2.0 documentation as closely as possible.
Does anyone know what I have to do to get it to generate the tables? Running it doesn't even produce an error.
Cheers,
Matt.
OK so I'm using dynamic sql to enable me to have a variable for the order by, but now it's giving me the following error
Syntax error converting character string to smalldatetime data type.
Any help is very much appreciated
Code follows
CREATE PROCEDURE spBattingAve1
@cid datetime,
@cid1 datetime,
@sid nvarchar(10)
AS
DECLARE @query nvarchar(4000)
SET @query = 'SELECT MAX(t_batting.runs) AS BestRuns,
COUNT(t_batting.dnb) AS DidNotBat, t_player.surname, t_player.firstname,
t_batting.player_id,
Sum(t_batting.runs) as SumOfruns, COUNT (*) AS Games,
COUNT (t_batting.notout) as nout,
(Sum(runs)/(COUNT(*)-(COUNT(notout)+COUNT(dnb)))) as AverageRun,
(COUNT(*)-COUNT(dnb)) AS Innings,
(SELECT COUNT(*) FROM t_batting inner join t_game on t_batting.game_id = t_game.game_id WHERE (t_batting.player_id = t_player.player_id) AND runs >= 50 AND runs <100 and t_game.date >= '+@cid+' And t_game.date <= '+@cid1+' GROUP BY t_batting.player_id) AS Overfifty,
(SELECT COUNT(*) FROM t_batting inner join t_game on t_batting.game_id = t_game.game_id WHERE (t_batting.player_id = t_player.player_id) AND runs >= 100 and t_game.date >= '+@cid+' And t_game.date <= '+@cid1+' GROUP BY t_batting.player_id) AS Overton
FROM t_batting
INNER JOIN t_game ON t_batting.game_id = t_game.game_id
INNER JOIN t_player ON t_batting.player_id = t_player.player_id
WHERE t_batting.player_id = t_player.player_id
AND t_game.date >= '+@cid+' And t_game.date <= '+@cid1+'
GROUP BY t_batting.player_id, t_player.surname, t_player.firstname, t_player.player_id
HAVING (COUNT(*)-(COUNT(notout)+COUNT(dnb))) <> 0
order by '+@sid+'
DESC'
exec (@query)
In SQL 7.0, when i use the below query in query analyzer, I got an error message. why?
======================
Set Identity_insert on
UPDATE Table1
SET no = 3
WHERE no = 4
Set Identity_insert off
go
Error message
=============
Server: Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'on'.
Server: Msg 156, Level 15, State 1, Line 7
Incorrect syntax near the keyword 'off'.