(1) I know how to use the ? ? ? and 0, 1, 2 notation in Parameter Mapping within Execute SQL Task. However, the interface allows me to give descriptive names to my parameters (other than the ordinals 0, 1, 2, ...). To be more clear, if you go into Parameter Mapping and click in Parameter Name column, you are not just restricted to typing in 0, 1, 2, ... You can type anything you want for the name. Does this suggest that I can use other things besides a "?" in my SQL command?
(2) What is Parameter Size? Is this like a data type? If so, why am I allowed to type in anything I want in there?
I am trying to assign the same package variable value to three different parameters in a query. The variable contains the name of a database which the user will input during package execution. First I check to see if the database exists (if it does I drop it), then in either case I create the database. See code:
if exists
(
select name
from sys.databases
where name = ?
)
begin
drop database ?;
end;
go
create database ?;
go
This is the error I am getting:
[Execute SQL Task] Error: Executing the query "if exists ( select name from sys.databases where name = ? ) begin drop database ?; end; " failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
My "User::DestinationDatabase" variable is mapped to 0,1,2 using an OLE DB connection. Any suggestions would be welcome.
Hi, I am trying to use an integer as input parameter for my task I get suck on the parameter data type.
The input parameter is define as @Control_ID variable as Int32 in SSIS. When I got into the parameter mapping of Execute SQL Task, I don't find the Int32 data type. I used to try Short, Numeric, Decimal and so on, but all of those data type didn't work. and it returns the following error message:
SSIS package "DCLoading.dtsx" starting. Error: 0xC002F210 at Update Control_ID, Execute SQL Task: Executing the query "use DCAStaging
update DCA_HFStaging set [dbo].[Control_ID] = P0 where [Control_ID] is null " failed with the following error: "The multi-part identifier "dbo.Control_ID" could not be bound.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Task failed: Update Control_ID Warning: 0x80019002 at DCLoading: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "DCLoading.dtsx" finished: Failure.
Variable Name : User::IntValue Direction: ReturnValue Data Type: Long ParameterName: 0
I am getting the following error, when I run this package.
[Execute SQL Task] Error: Executing the query "EXEC ? = [dbo].[SetSLATimePriority]" failed with the following error: "Invalid parameter number". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I am not able to figure out, where exactly the problem is.. Can some one please help me out?
I am getting an error message (mentioned below) in the variable mapping of Execute SQL Task in SSIS.
" Error: ForEach Variable Mapping number 9 to variable "User::Value" cannot be applied. "
" Error: The type of the value being assigned to variable "User::Value" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. "
Pls anyone have a look and give me a solution asap.
The data types of the fields are: Catalog_ID: bigint Product_ID: bigint IsBlocked: bit
I have two variables called "old_catalog_id" and "new_catalog_id" with the following values: old_catalog_id: 56789 new_catalog_id: 11111
Now, I would like to select all the recods, whose Catalog_ID fields equals the value in the variable "old_catalog_id" and insert identical recods with the "new_catalog_id" value.
The result of that operation on my sample records is:
My Solution: In order to realize this solution, I have created the following tasks on the Control Flow.
1. Create an Execute SQL Task for the selection. (Name: Selection Task) 2. Create a For-Each-Loop for iterating on the result set. (Name: Loop on results Container) 3. Create an Execute SQL Task inside the For-Each-Loop container for inserting the new records. (Name: Insertion Task)
Configurations and Problems: 1. Selection Task: General Tab: Result Set: Full Result Set SQL Statement: select Product_ID, IsBlocked from MyTable where Catalog_ID = ?
Parameter Mapping Tab: Variable Name -- Direction -- Data Type -- Parameter Name User:: old_catalog_version -- Input -- Large_Integer -- 0
Result Set Tab: Result Name -- Varibale Name 0 -- User::FullResultSet (which has the Data Type: Object)
When I execute this task, I get no records. Thus, I have hard-coded the value of Catalog_ID in the Sql Statement parameter. Now, I get the correct 2 records in the result set. Question 1: What am I doing wrong in the Parameter Mapping?
2. Loop on results Container: Collection Tab: Enumerator: Foreach ADO Enumerator ADO object source variable: User::FullResultSet Enumeration mode: Rows in the first table
Variable Mappings Tab: Variable -- Index User:: old_prod_id -- 0 (Data Type of "old_prod_id" is Int64) User:: old_isBlocked -- 1 (Data Type of "old_isBlocked" is Boolean)
When I execute the package, it fails with the following error message: Error: 0xC001F009 at SQL Tasks: The type of the value being assigned to variable "User:: prod_id" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Thus, I have changed the data type of the variable "old_prod_id" to Object. Now, the package runs successfully.
Question 2: Why isn't the package accepting "Int64" as the data type of my variable, although the corresponding DB field has the type "bigint"?
3. Insertion Task: General Tab: Result Set: None SQL Statement: insert into MyTable (Catalog_ID, Product_ID, IsBlocked) values (?, ?, ?)
Parameter Mapping Tab: Variable Name -- Direction -- Data Type -- Parameter Name User::new_catalog_version -- Input -- Large_Integer -- 0 User:: old_prod_id -- Input -- Large_Integer -- 1 User:: old_isBlocked -- Input -- Variant_Bool -- 2
When I execute this task, it fails with the following error message: Error: 0x0 at Insertion Task: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Catalog2Context_CATALOGS". The conflict occurred in database "XS_EC_CCH_PEGXSAP2", table "eSearch4.CATALOGS", column 'ID'.
Well, the message implicitly states that the value of the variable "new_catalog_version" has violated the mentioned FOREIGN KEY constraint. But I have set a breakpoint and I saw that the value was set correctly. So, it seems that the Execute SQL Task is not able to read the value of the variable correctly.
Question 3: What am I doing wrong in the Parameter Mapping, which causes the task not being able to read the value of the variables correctly?
Hi all, I'm working with Execute SQL task. Connection type: OLE DB. With the following settings, the task works fine:
Parameter mapping:
Code Snippet
Variable Name Direction Data type Parameter Name User::InputFile Input NVARCHAR 0 User::DesiredOutput Input NVARCHAR 1 SQLStatement:
Code Snippet
exec [spu_CreateOutput] ?, ?
However, I want to put in some conditions so I modified the task as:
Parameter mapping:
Code Snippet
Variable Name Direction Data type Parameter Name User::OutputFile Input NVARCHAR 0 User::InputFile Input NVARCHAR 1 User::DesiredOutput Input NVARCHAR 2
SQLStatement:
Code Snippet
if(? <> 'NotUsed') Begin exec [spu_CreateOutput] ?, ? End
But the modification doesn't work. The following message was thrown:
Error: 0xC002F210 at CREATE OUTPUT, Execute SQL Task: Executing the query "if(? <> 'NotUsed') Begin exec [spu_CreateOutput] ?, ? End " failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Task failed: CREATE OUTPUT
Can anyone tell me what I have been wrong with it? It seems that parameter mapping can only apply for a single select statement/function/procedure call :-?
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
I have a small problem in parameter mapping for Execute SQL Task. I am using a delete statement with 2 conditions. Followed by another Execute SQL Task which contains commit statement.
delete from tname where c1 = ? and c2 =?
where c1 is number(4) datatype and c2 is of varchar2(20) datatype in oracle.
The connection manager i am using is ORacle OLE DB provider. I am passing 2 global variables i.e g_v1 of Int32 and g_v2 of String Type.
In the parameter mapping of the Executing SQL task, i am mapping these 2 variables for c1 and c2 and changed the datatypes inside parameter mapping as Numeric for c1 and Varchar for c2.
I also set the property as ByPassPrepare = True.
When i am executing the package i getting INVALID NUMBER ERROR. i believe the SSIS is unable to perform the implict datatype converison.
For the next run, i changed the g_v1 varible datatype to Double and also i changed the parameter mapping for c1 as Doble datatype. This time it is working fine. I can see the Green signal for the 2 SQL Tasks.
But when i connected to Oracle check the count in the table, the data is not getting deleted.
Also, I set the property RetainSameConnection = TRUE for oracle connection manager. I am not able to trace this logical error.
The same is working fine in my local machine. But i am facing the problem when i deployed the same on the client machine.
Is there any problem with parameter mapping? What should be equialent Datatype for Oracle NUMBER datatype that should be used inside the SSIS package while declaring the global variable and inside the parameter mapping.
I am trying to create an Execute SQL task that sets a variable.
This is my SQL
DECLARE @Period AS DATETIME
SET @Period =Parameter0 + '/01/' + Parameter1 SET @Period = DATEADD(m, -1, @Period)
SELECT DATEADD(s, -1, @Period)
This statement parses okay.
I mapped two variables called "User::PeriodMonth" and "User::PeriodYear" in the Parameter Mapping tab to the parameters.
In the Result Set tabl I have mapped a variable "User::PeriodStartDate" to Result Name "PeriodStartDate".
The error I get is the following:
[Execute SQL Task] Error: Executing the query "DECLARE @Period AS DATETIME SET @Period =Parameter0 + '/01/' + Parameter1 SET @Period = DATEADD(m, -1, @Period) SELECT DATEADD(s, -1, @Period) " failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The Online Books are not helpful. They just say you have to bind the parameters to the application variables.
What am I doing wrong?
I want to set another variable called "PeriodEndDate" also. Can both variables be set in the same task?
Is it not possible to have table name as a parameter? For example have the SQL something like:
Delete From ? Where ID = ?
.. I get error:
[Execute SQL Task] Error: Executing the query "Delete From ? Where ID = ?" failed with the following error: "Must declare the table variable "@P1".". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I have a Script task which generates a GUID and stores it in the variable @[User::AttachmentListId], which is of type System.Object since Guid wasn't an option. Following this is an Execute SQL task (with an OLE DB connection to an SQL Server 2000 database) whose SQL statement is
EXEC AddAttachmentListItem ?, ?, 0
My parameter mapping looks like this (variable name, direction, data type, parameter name, parameter size):
@[User::AttachmentListId], Input, GUID, 0, -1
@[User::AFilePath], Input, VARCHAR, 1, 260
When I execute my package I get the following error:
[Execute SQL Task] Error: Executing the query "EXEC AddAttachmentListItem ?, ?, 0" failed with the following error: "The type is not supported.DBTYPE_GUID". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
This worked earlier when the first parameter was an int and not a uniqueidentifier, but I reworked my design because the GUID was a better choice for what I was doing. Well, at least 'til I got to this point....
In temp table there rae data which start with 1 and 2.I want to select only those record which start with 1 Zone is a parameter to the Execute sql task in ssis package..I have created sample code to test when I am running my query I am not getting anything
create table #temp ( zoneid bigint ) insert into #temp values(100000000000000000) insert into #temp values(100000000000000000) insert into #temp values(100000000000000000) insert into #temp values(100000000000000000) insert into #temp values(200000000000000000) insert into #temp values(200000000000000000)
I have a SSIS Execute SQL Task that calls a stored procedure with a date parameter. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. Setting ByPass Prepare to True does not affect the outcome. I also used the query directly in the SQL task itself to no avail. Executing the query in Query Analyzer works. Any assistance would be greatly appreciated.
As part of the logging process for data input, I want to update two fields in a logging table. The first is a datetime, derived from looking up the maximum value in another table (the table I've just imported), and the second is an integer - the number of rows captured in a variable during the task.
I can do this in two separate Execute SQL tasks as follows:
Task 1 syntax
DECLARE @maxDate datetime SELECT @maxDate = max(dtLastChangedDate) FROM dbo.tblCancel_RAW
UPDATE dbo.tblLogging SET PreviousFilterValue = CurrentFilterValue, CurrentFilterValue = ISNULL(CAST ( @maxdate as varchar(25)),CurrentFilterValue), DateSourceTableLastRead = GetDate(), RowsReturned= -1 WHERE SourceTableName = 'cancel'
Task 2 Syntax, with the variable user::rowsimported mapped to parameter 0
UPDATE dbo.tblLogging SET RowsReturned= ? WHERE SourceTableName = 'cancel'
However I cannot make this work with a single SQL statement such as
DECLARE @maxDate datetime SELECT @maxDate = max(dtLastChangedDate) FROM dbo.tblCancel_RAW
UPDATE dbo.tblLogging SET PreviousFilterValue = CurrentFilterValue, CurrentFilterValue = ISNULL(CAST ( @maxdate as varchar(25)),CurrentFilterValue), DateSourceTableLastRead = GetDate(), RowsReturned= ? WHERE SourceTableName = 'cancel'
because no matter how I try to map the parameter (0,1,2,3,4 etc) the task fails.
Is this behaviour by design, is it a bug, or is there something I've missed?
Hi, this might be a simple one, but I have been stuck on it for days. I am just getting into SSIS and have been muddling through it for the rest of this package but I am stuck on this. I am using this SQL Execute Task to run some lookup queries and then call the sp_send_dbmail stored procedure. I have this placed in a For Each loop container. I am using a SELECT DISTINCT Branch FROM table1 into an Object parameter, and passing that into the loop container. I am then using a Input Parameter into this SQL Execute Task of type String. I have run a Script task right before this step to ensure that the variable is populated and correct. Any assistance would be greatly appreciated!
Here is the SQL Execute Task :
DECLARE @SQL varchar(2400), @emaillist varchar(200), @branchMgrEmail varchar(100), @officeMgrEmail varchar(100), @branchMgrEmpNo varchar(5), @officeMgrEmpNo varchar(5), @subjectline varchar (100), @Today varchar(10), @BranchNumber varchar(2) SET @BranchNumber = ? SET @Today = convert(char(8),getdate(),1) SET @SQL = 'SELECT rtrim(CONVERT(char(10), PostedDate, 101)) AS Posted_Date, CAST(Branch AS CHAR(2)) AS Branch, CAST(Department AS CHAR(2)) AS Department, CAST(InvoiceNumber AS CHAR(7)) AS Invoice_Number FROM onbase.dbo.MHC_IncompleteRepairOrders WHERE Branch = ' + @BranchNumber + 'AND HardCardCount = 0 AND WorkAuthCount = 0 AND QualityControlCount = 0 AND MiscDocsCount = 0' SET @subjectline = @Today + ' - Repair Order Validation Notification for Branch #' + @BranchNumber SET @branchMgrEmpNo = (SELECT branchempno FROM onbase.dbo.BranchMaster WHERE Branch = @BranchNumber) SET @officeMgrEmpNo = (SELECT officeempno FROM onbase.dbo.BranchMaster WHERE Branch = @BranchNumber) SET @branchMgrEmail = (SELECT empemailaddress FROM onbase.dbo.ActiveDirectory WHERE CAST(empno AS integer) = @branchMgrEmpNo) SET @officeMgrEmail = (SELECT empemailaddress FROM onbase.dbo.ActiveDirectory WHERE CAST(empno AS integer) = @officeMgrEmpNo) SET @emaillist = @branchMgrEmail + '; ' + @officeMgrEmail BEGIN EXEC msdb.dbo.sp_send_dbmail @recipients = 'email@email.com', --@recipients = @emaillist, --@copy_recipients = 'email@email, @attach_query_result_as_file = 0, @subject = @subjectline, @body = 'This email contains a list of Stuff
This is a copy of the ERROR message that I am receiving. Any suggestions?
failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Send email to Branch Mgr and Office Mgr
I have a execute sql task to create and drop logins. I want to create/drop the ASPNET login, but I need to pass the domain using a parameter. So I mapped a parameter:
Variable name: User::serverName
Direction: Input
DataType: Varchar
Parameter Name:0
and the sql is the following:
CREATE LOGIN [?ASPNET] FROM WINDOWS
But I get the error:
Executing the query "CREATE LOGIN [?ASPNET] FROM WINDOWS failed with the following error: "Windows NT user or group '?ASPNET' not found. Check the name again.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I'm trying to do something that should be fairly straightforward, but SSIS seems to be getting confused. I have a stored procedure which takes a timestamp as an input parameter. (NOTE: It's not a DateTime that's being stored as a DBTIMESTAMP, it really is a timestamp in the SQL sense.)
The command should be something like this:
Code Block
EXEC dbo.UpdateSynchTimestamp ? I tried to use my variable to pass the value through Parameter Mapping, but I got an unusual error:
[Execute SQL Task] Error: Executing the query "EXEC dbo.UpdateSynchTimestamp ?" failed with the following error: "An error occurred while extracting the result into a variable of type (DBTYPE_DBTIMESTAMP)". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
This is strange for a number of reasons:
1) The DBTIMESTAMP parameter has the Direction set to "Input", so it should not be interpreted as an Output or ReturnValue. 2) The Execute SQL Task has Result Set = "None", so it should not be trying to return anything.
If I change the code to include a value hard-coded it works:
Code Block
EXEC dbo.UpdateSynchTimestamp 0x00000000000013BD It is only when a variable is involved that it breaks.
Finally, here's the Stored Procedure itself:
Code Block
CREATE PROCEDURE [dbo].[UpdateSynchTimestamp] @NewValue TIMESTAMP AS BEGIN SET NOCOUNT ON;
UPDATE ServerSettings SET [Value] = @NewValue WHERE [Key] = 'SynchTimestamp' END Doe anyone have any suggestions as to why this isn't working for me? For the time being, I have a Script Task which constructs the command text and stores it in a variable. I can't even use an Expression because the DBTIMESTAMP is not supported.
Hello! I would like to write a value from a column to a parameter in SSIS with the Execute SQL task. The problem is that I will never get a value for the parameter.
You can recreate the problem with the AdventureWorksDW sample database.
1. Drop an execute SQL task in the control flow
2. Set the connection to the AdventureWorksDw database
3. Write this in the SQL Statement box Select Max(FullDateAlterNateKey) as LastDate
From DimTime 4. Set the resultset to single Row 5. Under result set assign LastDate as the Result Name and create a parameter with a default date. 6. Execute the task, that will finish succesfully but the value of the parameter in 5 have not changed.
I have tried to change the scope to both the package level and the task level without any success. The value of the variable is still the default value. I have also tried a string variable without sucess.
I'm having a heckuva time with creating output parameters based on a query.
Here's what I'm doing. Every day, we copy rows from our mysql table to our sql server table. We only want to copy those rows that are new, so as to not have to recopy the entire table.
So I have a DataReader Source set to Ado.net/odbc provider that connects to the mysql db. The destination is an OLE connection to the local sql server.
I create an Execute SQL Task. The connection is set to the OLE connection The type is direct input The SQL Statement is "select max(id) from copy_table"
In Parameter Mapping, I create a user variable called maxId that is an int64. That variable is now used as the Variable Name. The Direction is Output. The Parameter Name is 0.
Whatever data type I use for the mapping does not work with the variable type. If the parameter was set to ULARGE_INTEGER, here's the error [Execute SQL Task] Error: Executing the query "SELECT MAX(stats_id) AS max_id FROM copy_table" failed with the following error: "Type name is invalid.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If parameter is set to LONG: [Execute SQL Task] Error: An error occurred while assigning a value to variable "maxId": "The type of the value being assigned to variable "User::maxId" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ".
I found that if variable and parameter were dates to use datetime for the variable and DBTIMESTAMP for the parameter.
There are an awful lot of combinations between all the possible variable types, and the possible parameter types. Does anyone know the secret combination for your typical integer?
Here's the situation: I have a ssis package which receives 3 dates as input parameters (3 datetime variables), executes different data flows and at the end inserts (among some other values) these 3 dates into a custom log table.
The problem comes while inserting the values into a log table. I added an Execute SQL Task that calls a stored procedure which inserts a record into a log table (sqlStatement exec dbo.InsertIntoLog date1=?, date2=?, date3=?). In Parameter mapping section I set parameters = variables that hold the datetime values. The problem is that the dates are inserted into the log table in American format (mm/dd/yyyy, that's the server setting), my dates are in the european format...
Any ideas how to avoid it? Is there a way to write an expression instead of the sqlStatement in which I'd do some datepart-ing?
This works great it iterates through a file and looks at all the files checks to see if they have been loaded into the db table, if not it loads the file.
My spGetFile has RETURN 1 if a file is loaded and RETURN 0 if the file is not loaded.
Now I add a new variable:
Step 1: add to Foreach Loop Container
ForEach Loop Container Name = Return, Scope = ForEachLoop, Data Type= Int32 Value=0
~~"Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.~~
I tried with an ADO.Net connection ... works until I add the ReturnValue parameter ...
I've encountered a new problem with an SSIS Pkg where I have a seq. of Execute SQL tasks. My question are:
1) In the First Execute SQL Task, I want to store a single row result of @@identity type into a User Variable User::LoadID of What type. ( I tried using DBNull Type or Object type which works, not with any other type, it but I can't proceed to step 2 )
2) Now I want to use this User::LoadID as input parameter of What type for the next task (I tried using Numeric, Long, DB_Numeric, Decimal, Double none of there work).
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
Hi I have migrated a DTS 2000 package to an SSIS package.
Half of it works fine, when stored procedures are called that don't use parameters they work fine on SSIS.
However when a SP is called with a parameter it can't find the parameter name ?
I have mapped the parameter under "parameter mappings" , the parameter is a simple date value which is created at the beginning of the SSIS package in a SQL task.
it is saved as a global variable , and i have mapped this as the parameter , yet it still can't find the param. name ?
I have a small problem in parameter mapping for Execute SQL Task. I am using a delete statement with 2 conditions. Followed by another Execute SQL Task which contains commit statement.
delete from tname where c1 = ? and c2 =?
where c1 is number(4) datatype and c2 is of varchar2(20) datatype in oracle.
The connection manager i am using is ORacle OLE DB provider. I am passing 2 global variables i.e g_v1 of Int32 and g_v2 of String Type.
In the parameter mapping of the Executing SQL task, i am mapping these 2 variables for c1 and c2 and changed the datatypes inside parameter mapping as Numeric for c1 and Varchar for c2.
I also set the property as ByPassPrepare = True.
When i am executing the package i getting INVALID NUMBER ERROR. i believe the SSIS is unable to perform the implict datatype converison.
For the next run, i changed the g_v1 varible datatype to Double and also i changed the parameter mapping for c1 as Doble datatype. This time it is working fine. I can see the Green signal for the 2 SQL Tasks.
But when i connected to Oracle check the count in the table, the data is not getting deleted.
Also, I set the property RetainSameConnection = TRUE for oracle connection manager. I am not able to trace this logical error.
The same is working fine in my local machine. But i am facing the problem when i deployed the same on the client machine.
Is there any problem with parameter mapping? What should be equialent Datatype for Oracle NUMBER datatype that should be used inside the SSIS package while declaring the global variable and inside the parameter mapping.
Is there any way to see/look the sql statement which is formed after Parameter Subsititution inside the log file? Can we print the SQL Statement Formed by the Execute SQL task inside a script task ?
Any help would be greatly appreciated ! Thanks in advance
I have used Data Flow component that refers to named query of data source view. It is a OLE DB source.
The SQL Command property of data flow component shows SELECT * FROM Tablename as I defiend in named query. I have modified the query to accept a parameter as SELECT * FROM Tablename WHERE Status = ?
Now I need to pass the package variable to this parameter. How to I pass using ParameterMapping property?. What is correct way of passing the parameter mapping ? I tried with @[TestNS:tatus] variable. But it throws error The parameter mapping string is not in the correct format.
I am working on SSIS package that gets data from SQL 2005 Database and writes that to a flat file. But I need to write the count of records as part of the header.
Here is what i am trying:
The OLE DB Source is calling a stored procedure and returning two things i.e. a resultset and an output parameter. The data access mode is SQL Command.
Code SnippetEXEC [Get_logins] ?, ?, ? OUTPUT
In the Set Query Parameters dialogbox, all the three patameters are mapped to three different user variables.
What is happening is that the user variable that is mapped to output parameter is never updated. The header property expression is written as follows
I tried to watch the variable in watch window but to no avail. Any guidance if it is bug or I am missing some thing? Any thoughts, how can I accomplish this? I have also tried adding Row Count Transformation but its variable has the same behaviour. If I set the value of @LoginCount variable to some value, this initially set value is successfully written to the file header.
