Parameter Valid Values
Sep 26, 2007
I am deploying an rdl that is being deployed in a server.But i am encountering a problem regarding the valid values of the parameter.My parameters have dependencies,and one of my parameter comes out with two dependencies.
Scenario :
User needs to input his userID to access Book A.
Book B needs Book A because the output will be depending on the its content.
And Book C depend on Book B.
Problem:
when deploying, only Book A will have the initial value.The dependency in Book B is only one,which is fine.It shows its valid values. But how about for Book C which have 2 dependencies? Because it doesnt show it's valid values..
View 3 Replies
ADVERTISEMENT
Feb 28, 2008
Hi,
We have a report server which has lots of reports. this particular report has 375 subscriptions and 80% of them are failing with the error "The subscription contains parameter values that are not valid." since last week nothing new was done on the server. when I open the properties of one of the subscriptions, one of the parameter value shows as a number where as it should be the name of a state.
Not sure what to do to get the subscriptions back.
any Ideas/help greatly appreaciated.
Thanks,
Phani
View 5 Replies
View Related
Mar 10, 2008
Hello,
I have something like 100 regular subscriptions.
It sometimes happen that one of the subscriptions suddenly stop to work with error "The subscription contains parameter values that are not valid". Example, one report has a dozen subscriptions, one of them stop to work. I look into the subscription and see that either one of the parameters is no longer set to a value or see nothing special besides the warning at the top of the subscription page. Parameters are all set to either default or some value(s). I reset one of the parameters, validate, or simply validate with no change and it works again.
Next time, in one or three weeks another subscription will fail, I will reset it.
Sometimes there are no errors, sometimes just 1 error and sometimes multiple errors accross reports or sometimes one report will suddenly have a few errors.
Right now, I use a weekly report to warn me after the fact of what were last week errors if any (no data, parameters unvalid, etc).
It looks like it happen with strings parameters based on datasets like "Sales offices" by example, where value and label are the same. Note that sales offices are by nature very stable, we do not change the spelling nor add remove entries. The list being a dataset gets rebuild, just to make sure we do not miss any eventual new sales office but if there is a new sales office, no one had a chance to select it as parameter value before it is in the dataset.
I am really not sure what is going on, were parameters values changed in the metadata? I do not think so.
Anyways, Is there a way to get an early warning instead of an after the fact error warning?
Is there anything else I coud try to "Refresh" or "remap" parameters values to avoid these errors?
When the subscription was created by a business analyst, If the parameters becomes blank, I have a hard time figuring out what it was when it was still valid. Is there any way to have a list of parameters values and have these values automatically "re-selected" by report server when the value gets lost?
This is not a big problem however it is annoying and people will have a bad perception of the system quality. "I created a subscription for Sacramento and never got my report", some people will also introduce garbage because they will create a new subscription instead of fixing the broken one, then they may eventually get twice the same report.
Any thought, does anyone had the same problem?
View 2 Replies
View Related
May 21, 2007
This is the error I'm getting. I will paste my code below:
"
DeleteCommand="DELETE FROM [Friends] WHERE [FriendName] = @FriendName"
SelectCommand="SELECT * FROM [Friends] WHERE (([FriendName] = @FriendName))"
UpdateCommand="UPDATE [Friends] SET [UserName] = @UserName, [UserID] = @UserID, [IP] = @IP, [AddedOn] = @AddedOn, [FriendName] = @FriendName, [IsApproved] = @IsApproved WHERE [FriendID] = @FriendID">
Type="String" />
DataSourceID="request_source" DefaultMode="Edit" EmptyDataText="You have no pending friend requests"
GridLines="None" Height="50px" Width="125px">
ReadOnly="True" SortExpression="UserName" />
Text="Accept" />
CommandName="Delete" Text="Deny" />
Text="Edit" />
CommandName="Delete" Text="Delete" />
ReadOnly="True" SortExpression="FriendID" Visible="False" />
'>
'>
View 10 Replies
View Related
Oct 4, 2007
Hi,
I'm trying to set up a data-driven subscription and having problems with parameters. On the Report Parameter Values screen of the Create Data-Driven Subscription function I have set a parameter TimesheetPeriodEnd to "Specify a static value" and checked the NULL box. In the report the parameter is type string and allows nulls. When I try to run the subscription the reports are not sent and the error log contains the following message:
ReportingServicesService!library!f!10/05/2007-09:31:08:: Status: Failure sending mail: Default value or value provided for the report parameter 'TimesheetPeriodEnd' is not a valid value.
ReportingServicesService!notification!f!10/05/2007-09:31:08:: Notification 0ae544df-4b1b-4a46-b7ab-cdefdca201be completed. Success: False, Status: Failure sending mail: Default value or value provided for the report parameter 'TimesheetPeriodEnd' is not a valid value., DeliveryExtension: Report Server Email, Report: Timesheet, Attempt 0
I am also setting other parameters for this subscription in the same way and not getting errors.
Any ideas? Previously I have had problems passing null values to parameters from the subscription query "Get value from database" from SELECT NULL AS ParameterName (this function just doesn't seem to work in SSRS). But I'm surprised I can't even seem to get this working with the default settings.
Regards,
Greg
View 5 Replies
View Related
Jun 5, 2002
I have inherited a database that has a column defined as bit. Looking at BOL it shows the valid values are 0,1, null. However there are several rows of data which have -1. Is BOL wrong? we think a VB program runs an update which changes this.
View 1 Replies
View Related
Jun 14, 2013
I am getting this error when upgraded to SQL Server 2012. Earlier the same report(.rdl) just working fine on SQL Server 2008 R2.
Message = System.Web.Services.Protocols.SoapException: The value of parameter 'param' is not valid. ---> Microsoft.ReportingServices. Diagnostics. Utilities.InvalidParameterException: The value of parameter 'param' is not valid. ---> System.UriFormatException: Invalid URI: The Uri string is too long.
Is there anything changed in SQL Server 2012 regarding this.
View 8 Replies
View Related
Nov 8, 2006
Hi there
I have a sales report that is pulling up data and displaying the detailed lines and the aggregate/summary lines grouped by a single field.
THe report say has 10 summary/aggregate lines and each summary lines have a maybe 20 more lines to it.
I want to NUMBER the SUMMARY lines only. In a new column on the summary line cell, if I type, =RowNumber(Nothing), I get a count of all its sub-lines displayed. How can I limit the scope of numbering to just the summary lines and make sure it does not include the sub lines involved ?
View 7 Replies
View Related
Dec 12, 2005
I've got a report model I am trying to move from a development server to a production server. I published it to my development RS, exported the SMDL file, then uploaded it to the production server. At that point, I tried assigning the data source to the model and got the error:
View 12 Replies
View Related
Jan 16, 2015
In Domain Management, when I click on the Import values button... "Import Valid values from Excel" is greyed out and unavailable.
View 0 Replies
View Related
May 6, 2015
i am parameterize my DB connection in sql sever 2012,it showing in agent job as parameter.but when i run job it giving me error:
Argument "" for option "parameter" is not valid. The command line parameters are invalid. The step failed.
what i need to do is pass different environment here while deploying to different env.
View 2 Replies
View Related
May 6, 2015
I am trying to create a column chart that calculates the percentage of computers in our IT environment that are Actively communicating to our SCCM Server.
I have two datasets:
1. Total_Count_Of_AD_PC DataSet.
2. PC_With_Active_SCCM_Clients dataset.
Basically i wan to calculate the percentage for each Region (i.e. AP for Asia Pacific, EMEA, Americas).
Below is the Total_Count_Of_AD_PC Dataset screenshot.
Below is the PC_With_Active_SCCM_Clients dataset.
Below is the expression that i used that is causing the error.
=CountDistinct(IIf(Fields!Region.Value="AP", "PC_With_Active_SCCM_Clients"),(Fields!Name.Value, "PC_With_Active_SCCM_Clients"),Nothing)/CountDistinct(IIf(Fields!Region.Value="AP", "Total_Count_Of_AD_PC"),(Fields!name.Value,
"Total_Count_Of_AD_PC"),Nothing)
Below is the error message....
The Y expression for the chart ‘Chart2’ has a scope parameter that is not valid for an aggregate function. The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a dataset.
View 6 Replies
View Related
Oct 15, 2007
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
View 7 Replies
View Related
Aug 11, 2005
Is it possible to fill a parameter list with values based on another parameter value?
Here's what I have so far (which hasn't worked)...
I'd like to generate a report listing information for a student. The report viewer would first select a school from the first drop-down menu, and then the second drop-down menu would populate with the list of students at that school.
I have a dataset that calls a sp which returns a list of schools (SchoolID and SchoolName fields from the database table).
I have another dataset that calls a sp (with SchoolID as the parameter) which returns a list of students for that school.
Both datasets return the appropriate data when tested individually, but when I set up the Report Parameters and build the report, these errors come up...
The value expression for the query parameter '@SchoolID' refers to a non-existing report parameter 'SchoolID'.
The report parameter 'Student' has a DefaultValue or a ValidValue that depends on the report parameter "SchoolID". Forward dependencies are not valid.
...Is it possible for the reoprt to generate a list of available parameter values based on the value selected for another parameter?
Any help you can give me would be great!! Thank you
View 5 Replies
View Related
Apr 11, 2008
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
View 1 Replies
View Related
Apr 30, 2007
Hi All.
I have a parameter (hidden) that gets its value using an expression base on another parameter.
When in the designer, the first time when the designer loads I can select the Parameter that controls the child parameter (expression lies in the default value section). The value changes.
When I change the parent parameter again, the value of the child parameter does not seem to change.
How can I make this parameter change automatically when the parent is changed ?
Any help will be appreciated.
Thanks,
Neil
View 3 Replies
View Related
Jun 6, 2007
If I have a Select statement like this in my C# code:
Select * From foods Where foodgroup In (@foodgroup)
And I want @foodgroup to have these values ... "meat", "dairy", fruit", what is the correct way to add the parameter?
I tried
meat, dairy, fruit
'meat', 'dairy', 'fruit'
but neither worked. Is this possible?
View 2 Replies
View Related
Sep 20, 2007
Hi, How can I display a value of a report parameter from one report into a textbox on another report??
View 1 Replies
View Related
Oct 25, 2007
Hi all,
I am using Microsoft_Time_Series and have set HISTORIC_MODEL_GAP to various values (from 1 to 21). I always get this error:
Error (Data mining): The 'HISTORIC_MODEL_GAP' data mining parameter is not valid for the 'My Time Series' model.
In Algorithm Parameters window, this parameters is not there by default, so I have to add it.
Any tip will be greatly appreciated.
View 3 Replies
View Related
Nov 1, 2006
Hello!I have tables "forum_topics" and "forum_categories":forum_topics:-topic_id-topic_title-topic_cat_id-topic_user_id-topic_dateforum_categories:-cat_id-cat_name For example: I have 5 categories in table forum_categories and by this query I can display topics from 2nd and 3rd category only. So I'm using this query:SELECT topic_title FROM forum_topics WHERE topic_cat_id IN (2;3)Now I want to parametrized this query by one parameter, so: SELECT topic_title FROM forum_topics WHERE topic_cat_id IN (@param)And I want to input this parameter lik in the query first - so @param = "2;3"But I have a problem to make this works, can someone explain me, how to solve this problem ? Thanks.
View 9 Replies
View Related
Apr 1, 2008
Let's say i've got simple table with only one attribute - primary key. I'm populating GridView via SqlDataSource, however dunno how to update PK - how to pass new-updated value and old value (to locate the right record to update) as the UpdateCommand parameters from GridView control.
Simple update sample using SQL statement: update TABLE_NAME set PRIMARY_KEY = @NEW_VALUE where PRIMARY_KEY = OLD_VALUE
Thank you for your kind help.
View 5 Replies
View Related
Apr 4, 2007
Hi,
In creating a report, how can you display a parameter selection that is a choice (for example, yes/no) where the data that is passed to the query is translated for the query. Selecting 'yes' would pass, for example, 'internal' to the query and selecting 'no' would pass 'external'.
Is this a setting that can be adjusted in Reporting Services, or is this just a matter of how I write my queries?
Thanks,
David
View 1 Replies
View Related
Mar 5, 2007
Hi,
I am seriously stuck in SQL Reporting Services. And don't know where to go and what to do in order to achieve what I want to achieve.
1. In my report I have the following parameters. SiteID, Document Name, Document Location and Action. These values are picked from the database through queries and filled in the parameter combos.
2. I want the user to be able to view the report for 'Any', 'All' and/or 'None' of the values in the parameter.
e.g.
2.a. The user can generate the report and return all values.
2.b. The user can generate the report with a particular 'SiteID' but all Document Locations, Document Names and Actions.
2.c. The user can generate the report for 'All' SiteIDs, but one Document Location, 'All' Documents and 'All' Actions.
etc.
I was trying this out with parameters. But it wasn't working. Meaning, first of all I wasn't able to get 'All' from the database.
Can someone please help me out, or at least point me in the direction where I should be looking, since I have run out of options.
View 5 Replies
View Related
Nov 13, 2007
I have a problem with reports parameters. When I enter the parameter value , Report shows the same value no matter what the parameter value is. Here is my code.
Code Block
WITH yesterdayCTE AS
(
SELECT type = 'Members Joined Yesterday'
, Borrowers = (select count(*)
from LoanApplication
where LoanApplication.SubmittedOn >= GETDATE()-1)
, Depositors = (select count(*)
from CDOrder
where CDOrder.SubmittedOn >= GETDATE()-1)
, CreditUnion = ( select CreditUnion.Name
from CreditUnion
where (CreditUnion.Id = @CreditUnionID) )
),
last7daysCTE AS
(
SELECT type = 'Members Joined Last 7 Days'
, Borrowers = (select count(*)
from LoanApplication
where LoanApplication.SubmittedOn >= GETDATE()-7)
, Depositors = (select count(*)
from CDOrder
where CDOrder.SubmittedOn >= GETDATE()-7)
, CreditUnion = ( select CreditUnion.Name
from CreditUnion
where (CreditUnion.Id = @CreditUnionID) )
),
last30daysCTE AS
(
SELECT type = 'Members Joined Last 30 Days'
, Borrowers = (select count(*)
from LoanApplication
where LoanApplication.SubmittedOn >= GETDATE()-30)
, Depositors = (select count(*)
from CDOrder
where CDOrder.SubmittedOn >= GETDATE()-30)
, CreditUnion = ( select CreditUnion.Name
from CreditUnion
where (CreditUnion.Id = @CreditUnionID) )
),
combinedCTE AS
(
SELECT * FROM yesterdayCTE
UNION ALL
SELECT * FROM last7daysCTE
UNION ALL
SELECT * FROM last30daysCTE
)
SELECT *
, Members = Borrowers + Depositors
FROM combinedC
Can anyone tell me how to fix this ?
Thanks
View 7 Replies
View Related
Feb 17, 2005
Hi...
I'm creating a procedure to fetch rows from table. One field will come come as IN(). Its the condition. That field is numeric field (note down), i would like to pass the In values as parameter.
eg: procedurename @fieldvalue varchar(100)
as
begin
...
WHERE fieldname IN(@fieldvalue)
while executing the procedure how to pass the value... or procedure itself has problem...?
Help me...
Tx in Advance...
View 2 Replies
View Related
Apr 25, 2007
Hi,
Is there any way to validate the input paratemers for the report? For example: I want to restrict the value to be less than 100 in one parameter. How to achieve this?
Thnx in advance.
View 2 Replies
View Related
Feb 8, 2008
I have some 5 parameters which I've specified as multi-valued and my report uses a stored procedure. When I select all values in my dropdown (parameters) within my reports nothing shows up. How can I pass multiple values of a parameter into my stored procedure such that it works?
View 4 Replies
View Related
Oct 5, 2006
Hi all,
I am having a serious problem developing my reports within VS2005. For no reason, on one of my report it seems the parameters have got a life of there own.
There is a collection of 4 parameters whose values change randomly (internal, hidden, multivalue). Regardless of what I set them to, once I click save some change, when I alter 1 parameter, the values of one of the other parameters change while the settings for the parameter I changed to not apply.
What is going on here, I have been developing reports without issue however this is becoming a major concern. Please help!
Kind regards
Taz
View 2 Replies
View Related
Apr 12, 2007
hi,
i wanna know ,where to keep configuration parameter values either in an config file (xml), or a parameter table. i have it in xml and its working fine , but for a few of them , i need a greater fleximibility to change the values at any time, so was considering a param table.
the problem is that , a common package which reads the config from xml , now will need to read it from a table , while in case of xml , a file path can be assigned to a variable to be used by the package, but here, i dont have any db connection specification, it may be loaded on various servers. is it feasible..to use a parameter table...??
View 10 Replies
View Related
May 16, 2008
Hi,
I use following code to generate a report.
Code Snippet
SELECT Portfolio,
RptSection,
RepExcRsn,
Report,
SUM( Units) as TotUnits ,
FROM Exc_SummaryData_Custom
WHERE (Report = 'Exc') AND (RepExcRsn = 'Grand Total') AND (RptSection ='New') AND (Portfolio IN (@Portfolio))
GROUP BY Report, RptSection,Portfolio, RepExcRsn
UNION ALL
SELECT DISTINCT 'ALL UP' AS Portfolio,
RptSection,
'Grand Total' AS RepExcRsn,
Report ,
CASE WHEN Portfolio = 'ALL UP' THEN (SELECT SUM(Units) FROM Exc_SummaryData_Custom
WHERE Portfolio IN ('CBank','DTC','EDirect', 'InstLend','ALL UP')AND (Report = 'Exc')
AND (RepExcRsn = 'Grand Total') AND (RptSection ='New') )
ELSE 0
END as TotUnits ,
FROM Exc_SummaryData_Custom
WHERE (Report = 'Exc') AND (RepExcRsn = 'Grand Total') AND (RptSection ='New')
GROUP BY Report, RptSection, Portfolio, RepExcRsn
My problem is when I input a value for Portfolio parameter, i get two rows instead of one. If I input 'ALL UP'
then I get value only for ALL UP. But if I input smthing else , then I get values for that paramter value as well as ALL UP thus giving me two rows not just one as I want.
Case stament always gives me 0 value for ALL UP which is not the true value.
can anyone help me to correct this?
View 3 Replies
View Related
Feb 21, 2007
hy all,
i'm using the object transform data task from a server (where i'm not dbo) to another server (where i'm dbo).
i'm getting data from a table. i need to select just some records from this table. i need to use a query like this one below...
select * from {table_name} where operationedate in ('20070101', '20070205', '20060524')
... cause everytime i run the dts the operationdate field must be filtered on different date.
so i tried to use the parameter from a global variables. i've tried lots of things but everytime i failed.
i used to try:
select * from {table_name} where operationedate in (?)
but it doesnt work!
any one can understand what i try to explain and even help me?
bye
nicola
View 7 Replies
View Related
Mar 30, 2006
I want to do something like this
SELECT LocationID, Description, ActiveFROM dbo.CapLocationWHERE (Active = 1)
AND (LocationID NOT IN (2)) AND
(LocationID NOT IN (@LocationID) OR @LocationID IS NULL)ORDER BY Description
For the life of my I can not figure out how to pass a group of values like 1,2,3.
Any help would be greatly appreciated,
Bryan
View 3 Replies
View Related
Jun 26, 2007
Hi,
I am using a stored Procedure where I am passing some parameter values.Following is my Code.
CREATE proc Usp_Rpt_GetDetails
@Fromdt varchar(12),
@ToDt varchar(12),
@ApscId numeric,
@StatusCode varchar(1),
@val numeric
as
Begin
if @StatusCode = "C" then @ vall(1,2)
End
select
'' as unuseid,
substring(ltrim(rtrim(s.Spares_Code)),1,12) as Code,
oh.WO_Number AS Claim_Id,
ltrim(rtrim(sc.section_code)) AS section_code,
ltrim(rtrim(dc.defect_code)) AS defect_code,
ltrim(rtrim(at.Action_Taken_Code)) AS Repair_Code,
cs.Call_status_code
from [32_Trans_Work_Order_Spares_Detail] ws
inner join [32_Trans_Work_Order_Header] oh on oh.WO_Number = ws.WO_Number
inner join [11_Master_Spares]s on s.Spares_ID = ws.Spares_ID
inner join [31_Master_Section_Code] sc on sc.Section_ID = ws.Section_Code_ID
inner join [31_Master_Defect_Code] dc on dc.Defect_ID = ws.Defect_Code_ID
inner join [10_Master_Equipment_Status] e on e.Equipment_Status_ID = oh.Equipment_Status_ID
inner join [00_Master_Country] c on c.Country_ID = mp.Country_ID
where e.Equipment_Status_ID in (1,2) and cs.Call_Status_ID in (1,2) and oh.WO_Record_Date between @Fromdt and @ToDt
and oh.WO_Status='C'
My Problem is How to pass values to parameters
Status Code Consists of values C, V, R which i am passing from the Front End
along with Call_Status_ID which can be 1,2.
Thanks ...
View 1 Replies
View Related
