I would like to set up cascading report parameters but need to supply the list of values in my dataset query as they are not being pulled from a table or stored procedure.
I would like to set up something like
select 'LS' Source Union select 'RH' Source Union select 'UK' Source
as the value list for my first parameter, then, I would like the second parameter to default to '1' if the first parameter has 'RH' or 'UK' selected but default to blank if the first parameter has 'LS' selected. I can get all to default to blank or 1 but can not seem to make it dependent.
I am querying OSI PI data using PI OLEDB source transformation in SSIS. When i write a simple query, data is coming. My requirement is to pass parameter to pull data from PI. When i do it the usual way of passing parameters, i get the following error:
"OLE DB Source failed the pre-execute phase and returned error code 0xC0202009"
This is my source query.
SELECT tag, time, value FROM PIAVG WHERE SUBSTR(tag,1,9) =? AND time > '20-Oct-15' and TIME <'29-OCT-15' AND TIMESTEP='1H'
I believe all of us use SQL Server Management Studio to execute query. As I encountered serious problem with this method, due to typo error by accident, I am wondering if we can run the .sql file from dos and supply parameters with it.Possible?
I'm kind of new at doing something like this. I'm trying to pull data into a results that exists in one of two databases. It works fine with query analyzer but gives me the error "has no parameters and arguments were supplied" when I try to convert it to a stored procedure.
The procedure is as follows, any help would be appreciated.
CREATE PROCEDURE sp_getInvoiceNoTest AS
declare @InVoiceNo as VarChar(30)
delete From Invoice_NBR
Insert into Invoice_NBR (Tran_NBr,ADDR_Name,ADDR_Line2,ADDR_Line3,CITY_NAM E,State_Name,ADDR_NAME2,ADDR_LINE4,ADDR_LINE5,CITY _NAME2,State_Name2)
select a.TranNo,b.AddrLine1,b.AddrLine2,b.AddrLine3,b.cit y,b.StateID,c.AddrName,c.AddrLine2,c.AddrLine3,c.C ity,c.StateID from Colucw17.Acuity_App.dbo.tarInvoice as a inner join Colucw17.Acuity_App.dbo.tciAddress as b on a.BilltoAddrKey=b.AddrKey inner join Colucw17.Acuity_App.dbo.tciAddress as c on a.BilltoAddrKey=c.AddrKey and a.BilltoAddrKey=a.BilltoCustAddrKey inner join Colucw17.Acuity_App.dbo.tarCustomer as d on a.CustKey=d.CustKey inner join Colucw17.Acuity_App.dbo.tciContact as f on a.confirmtoCntctKey=f.CntctKey where a.CreateuserID<>'admin' and a.TranNo='@InvoiceNo'
--Insert into Invoice_NBr (Tran_NBr,ADDR_Name,ADDR_Line2,ADDR_Line3,CITY_NAM E,State_Name,ADDR_NAME2,ADDR_LINE4,ADDR_LINE5,CITY _NAME2,State_Name2)
select a.TranNo,b.AddrLine1,b.AddrLine2,b.AddrLine3,b.cit y,b.StateID,c.AddrName,c.AddrLine2,c.AddrLine3,c.C ity,c.StateID from Colucw17.CSM_App.dbo.tarInvoice as a inner join Colucw17.CSM_App.dbo.tciAddress as b on a.BilltoAddrKey=b.AddrKey inner join Colucw17.CSM_App.dbo.tciAddress as c on a.BilltoAddrKey=c.AddrKey and a.BilltoAddrKey=a.BilltoCustAddrKey inner join Colucw17.CSM_App.dbo.tarCustomer as d on a.CustKey=d.CustKey inner join Colucw17.CSM_App.dbo.tciContact as f on a.confirmtoCntctKey=f.CntctKey where a.CreateuserID<>'admin' and a.TranNo='@InvoiceNo' GO
I have recently created several DTS Packages and scheduled them to run nightly. The Packages complete succesfully when executed from the DTS Designer. However, when they are executed by a scheduled job, the following error results.... DTSRun: Loading... DTSRun: Executing... Error: -2147220499 (800403ED); Provider Error: 0 (0) Error string: No Steps have been defined for the transformation Package. Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts.hlp Help context: 700. Process Exit Code 1. The step failed.
This packages exist and are running via scheduled jobs on another server. Does anyone know what is causing this error???? thanks!
ALTER PROCEDURE [Audit].[spBatchPackage_OnExtract]
@Execution_Idx int
,@Batch_Idx int
,@Source nvarchar(1024)
,@SourceId uniqueidentifier
,@Destination nvarchar(1024)
,@StartTime DATETIME
,@FileSpecification nvarchar(2)
When I execute the SQL Task, I get this error:
[Execute SQL Task] Error: Executing the query "[Audit].[spBatchPackage_OnExtract] ?, ?, ?, ?, ?, ?, ?" failed with the following error: "Invalid character value for cast specification". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any help on clearing up this error would be appreciated!
Hello all- Before I go any further, I have followed http://msdn.microsoft.com/en-us/library/ms188304.aspx as best possible. I am attempting to send mail through a DML trigger. We'll call the database 'DB', and it is owned by a domain account named 'DOMAINAcct'. The trigger simply blocks any CUD operations on a table which we'll call 'Tbl', and sends an email. Hence, it looks something like...
CREATE TRIGGER [dbo].[TR_Tbl_BlockChanges] ON [dbo].[Tbl] WITH EXECUTE AS OWNER INSTEAD OF INSERT,DELETE,UPDATE AS EXEC [msdb].[dbo].[sp_send_dbmail] @profile_name = 'AcctMail', @recipients = 'foo@bar.com', @subject = N'CUD operations not allowed on Tbl', @body = N'Blocked'
AcctMail is a valid profile and operates correctly. I have created the DOMAINAcct user in msdb, given it the AUTHENTICATE permission, and added it to the DatabaseMailUserRole. When the trigger fires, according to the article, the security context should switch to dbo (DOMAINAcct), then be successful when attempting to execute the msdb sproc. Instead I get the usual: Msg 229, Level 14, State 5, Procedure sp_send_dbmail, Line 1 The EXECUTE permission was denied on the object 'sp_send_dbmail', database 'msdb', schema 'dbo'.
In SQL Server using xp_cmdshell we can excute any of the command or executable files which can be executed in command prompt. Here my problem is that .. I am trying to execute OSQL from the MSSQL(Query Analyser) using xp_cmdshell.. but its give error saying "'osql' is not recognized as an internal or external command, operable program or batch file." This error occours when it is not able to find the executable file... but same thing I am able to execute from the command prompt. So I feel this problem is some where related to the path setting of windows. If some one can solve this problem or sugesst the how to set the path for window it will be help full.. waiting for reply
I'm running SQL Server 7.0 SP3 and having trouble with DTS.
I have an Execute SQL Task that runs several stored procedures. When one of the stored procedures fails, the Execute SQL Task just terminates without failing.
I found a knowledge base article (Q238523) dealing with this situation but it was supposedly fixed in SP2 - I have SP3! The other work around suggested, issuing a SET NOCOUNT ON, does not always work.
Has anyone else run into this or have any other suggestions.
I hate the thought of spending days doing another work around in order get basic DTS functionalty to work as it should!
I have ForEach Loop using Foreach File Enumerator. Within this loop I have SQL Task containing an Insert statement. When I run the Insert statement in query builder the transaction inserts data into a table as expected.
However, when actually running the process I am getting the error message:
Executing the query "INSERT INTO dbo.TEST_TABLE ..." failed with the following error: "Value does not fall within the expected range.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I currently have the ResultSet to "None" and have defined the parameter I am using. Where the process seems to joke is on my file_Name variable will I am trying to insert only part of the file name.
I added tasks to refresh two tables (delete from, insert into, update) to an SSIS project . I have them running from the WinXP scheduler. The issue:
In dev the tasks integrate and execute successfully from scheduler
In prod I can right click and execute each of the three tasks without any problem, but the same tasks cause my project to fail when executed from scheduler
Questions: Any ideas about what I am failing to see? How do I get a meaningful log messages from the tasks that are failing?
Thanks for your ideas...
Installed Edition: IDE Standard
SQL Server Analysis Services Microsoft SQL Server Analysis Services Designer Version 9.00.1399.00
SQL Server Integration Services Microsoft SQL Server Integration Services Designer Version 9.00.1399.00
SQL Server Reporting Services Microsoft SQL Server Reporting Services Designers Version 9.00.1399.00
Microsoft Visual Studio 2005 Version 8.0.50727.42 (RTM.050727-4200) Microsoft .NET Framework Version 2.0.50727
Installed Edition: IDE Standard
SQL Server Analysis Services Microsoft SQL Server Analysis Services Designer Version 9.00.1399.00
SQL Server Integration Services Microsoft SQL Server Integration Services Designer Version 9.00.1399.00
SQL Server Reporting Services Microsoft SQL Server Reporting Services Designers Version 9.00.1399.00
I have an SSIS package which calls a command line app.When run in BIDS, it executes normally. The command line app is passed the arguments, does what it needs to do.When called as a SQL Agent Job (by the agent, or by me) it fails when calling the app, giving an exit code of 2 (which is an exception trapped by a try-catch). The SQL Agent service is running under my user (it's a test environment). The argument passed (from the log) is valid, and I've run it against the app, it provides the appropriate output.I can't for the life of me figure out what's going wrong.The app is passed an argument of a path and a password, and applies the password to the file, using interop.
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
I know you can pass parameters into a Direct Input and a Stored Proc in the Execute SQL Task Editor, but can you pass parameters to a File Connection? If so, then how would I do that?
we have a Package, that worked fine for a long time. Now, it always fails on all computers with SP2 instaled. The problem apears in execute sql task, which uses ole db connection manager and calls a procedure with some input parameters (from sql server).
Package sends a undesirable data (".") into the procedure from variable, which has NULL or Empty string value. Originaly, data type of the Variable was Object, I tried to use also string, but in both cases the procedure was called with parameter "."
I'm trying to pass the value of a global variable as an input parameter in a 'execute sql task' DTS object.
However, SQL refuses to accept the global variable assigned to the input parameter '?'. When you run the DTS package the error message 'no value given for one or more parameters' appears.
When you save / exit the DTS object by clicking OK, and then go back into it, the 'input Global variables' parameter field is empty again. Searched msdn/knowledgebase to no avail - please help ! Thanks
Hi, I have a table with queries. I need to execute those queries and pass results into a variable. Then use that variable/result to execute other queries to make business decisions. EXAMPLE: TASK#1 TABLE-A :has queries below select count(*) from employee select count(* ) from mangers
I want to execute those queries and store results in @counts. How I execute all queries in table A and pass that to a variable?
TASK#2 Then I have another SQL task(may be SQL task) which use the value @counts make some decisions If @count > 1 then pass If @count <1 then fail
How can I do that?
I am still new to SSIS and not very familiar with variables. Any advice would be appreciated.
I have an Execute SQL Task in my SSIS Package. Now, this Execute SQL Task has the following query (Connection Type is OLE DB):
Code SnippetSELECT dbo.udf_CommonDateTime_Get (GetDate(), ?) As User_Datetime
I want 2 things from this Task: 1) It should take the 2nd argument to the UDF from a variable. 2) It should store the value returned by this SELECT statement into another variable.
So, I go ahead and modify the Parameter Mapping for the Task. Here I add the Input variable name, Data type and I give the Parameter Name as 0.
I also modify the Result Set for the Task. Here, I specify the Result Name as User_Datetime and give the appropriate Variable Name.
I am getting an error here and I believe it is due to the input parameter. The UDF is not getting the 2nd argument correctly.
My questions: 1) Has the Execute SQL Task been designed to handle UDFs like this. If not, then where am I going wrong? 2) What is the work-around for this? I need to pass a parameter (variable) to the UDF.
Thanks in advance.
Regards, B@ns
The error message is:
Code Snippet Execute SQL Task: Executing the query "SELECT dbo.udf_Common_DateTime_Get (GetDate(), ?) As User_Datetime" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Task failed: Set UserDateTime
I have several DTS packages that take data from SQL Server and exports them onto an Access DB located on the network. Basically, one Execute Process Task from within my DTS package takes the Access DB and zips it while another such task copies the zipped DB and pastes it onto another location on the network. All this works fine.
This export process happens once a month so each month I have to manually add a datestamp to the end of the Access DB file that’s being exported to distinguish it from prior month's export. For example, this month's export file would have AccessDB_20040727.mdb name and the next month it would be AccessDB_20040820.mdb (date is determined based on the date the output is exported on). AccessDB.mdb is the default name of the export DB and datestamp is added at the end of the file name depending on what date the export was run. As I said, I can do this manually each month and it works fine.
I want to, however, know if there is a way to automatically supply the datestamp to the Execute Process Task's Parameters' text box? Following is what I have right now in the Parameters box: \ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All_20040727.zip \ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All.mdb
I want to take above text from the parameters box and replace it with something like: \ghf1-ndc8-sqll$productionoutputlob200406FileName_RunDa te.zip \ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All.mdb
Where FileName_RunDate is a variable/placeholder for the name of the output with the datestamp the output is exported on.
There are three different Execute Process Tasks that are happening within each of my DTS packages so it's a time consuming job to have to manually add a datestamp to each package every month when data is exported.
Does anyone know if what I am asking is doable? If I can use a variable in the parameters box of each Execute Process Task’s properties and supply current datestamp values to it prior to executing the package each month? If so then what are the ways? How would I do that?
ALTER PROCEDURE dbo.SP_UpdateFixedRev /* ( @parameter1 int = 5, @parameter2 datatype OUTPUT ) */ ( @Number int, @FixedRev money ) AS BEGIN /* SET NOCOUNT ON */ Update Ticket set FixedRev = @FixedRev where Number = @Number; End
Here is my code:
Dim dbConn As New OleDbConnection Dim dbComm As OleDbCommand dbConn.ConnectionString = connStr 'connStr is class-level vrbl dbConn.Open() dbComm = dbConn.CreateCommand dbComm.Parameters.Add("@Number", OleDbType.Integer).Value = txtDatabaseTicketNo.Text dbComm.Parameters.Add("@FixedRev", OleDbType.Currency).Value = txtFixedRev.Text dbComm.CommandText = "SP_UpdateFixedRev" dbComm.CommandType = CommandType.StoredProcedure dbComm.ExecuteNonQuery() dbConn.Close()
However its not updating my database when I run the app from a button click event.
I need to run an SQL command, in which one of the fields is based on the current time, represented as a string in a specific format.
I used a script task to create the string from the current time, and store it in a package variable named "newDate". Later, in the execute sql task, I have the following update statement: "update table_1 set field_1 = ?" (OLE DB connection is used)
and in the parameters mapping I set parameter 0 to the string package variable "newDate".
The problem is that on runtime, the sql executes with the default value of the variable - i.e. it doesn't take the new value.
I checked it and placed another script task after the first one, that simply tries to read the variable "newDate" and print it to screen, but even here the default value is used.
Hello, a question please. Could anyone say me if I can create a store procedure with 2 'select's statements into. Besides, I'd want to know if I can execute a "select" depending on input parameters.
Hi everybody, I would like to know if it's possible to execute a stored procedure, passing it parameters, using not CommandType.StoredProcedure value of sqlcommand, but CommandType.Text.
I tried to use this: sqlCmd.CommandType = CommandType.Text sqlCmd.Parameters.Add(sqlPar) sqlCmd.ExecuteNonQuery()
With this sql command: "exec sp ..."
I wasn't able to make it to work, and I don't know if it's possible.
Another question: if it's not possible, how can I pass a Null value to stored procedure? This code: sqlPar = new SqlParameter("@id", SqlDbType.Int) sqlPar.Direction = ParameterDirection.Output cmd.Parameters.Add(sqlPar)
sqlPar = new SqlParameter("@parent_id", DBNull) cmd.Parameters.Add(sqlPar)
doesn't work, 'cause I get this error: BC30684: 'DBNull' is a type and cannot be used as an expression.
How can I solve this? Bye and thanks in advance.
P.S. I would prefer first method to call a stored procedure ('cause I could call it with 'exec sp null' sql command, solving the other problem), but obviusly if it's possible...=)
I am trying to exectue a stored procedure through execute sql task which takes two input parameters table name and filegroup to create a table and it also returns a value.
i am using the oledb connection
but i am getting the following error
[Execute SQL Task] Error: Executing the query "declare @rtn_value int exec spm_Utopia_FinanceUsage_Create_MonthlyTable ?,? select @rtn_value as rtn_value " failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
i tried with ado.net connection by directly giving the parameter names.
it will create a table but the the table name is something different from what i specified
I'm very new to SSIS and I€™m trying to do the following in a SQL task
RESTORE DATABASE @DatabaseName FROM DISK = @Backup WITH FILE = 1, MOVE @OldMDFName TO @NewMDFPath, MOVE @OldLDFName TO @NewLDFPath, NOUNLOAD, REPLACE, STATS = 10
I'm using an OLE DB connection and I have mapped user variables to the various parameter names. Unfortunately when i test the above command it fails on must declare the scalar variable "@DatabaseName". How can i get my values to be substituted into the command?
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General: Result Set: None Connection Type: OLE DB SourceType: Direct Input IsQueryStoredProcedure: False (this is greyed out and cannot be changed) Bypass Prepare: True
When I use the following execute statement where I am "Hard Coding" in the parameters, the stored procedure runs successfully and it places the data into the table per the stored procedure.
However, the @system_cd parameter can change, so I wanted to set these parameters up as variables and use the parameter mapping in the Execute SQL Task.
I have set this up as follows and it runs the package successfully but it does not put the data into the table. The only thing I can figure is either I have the variables set up incorrectly or the parameter mapping set up incorrectly.
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load] (@system_cd nvarchar(10), @location_type_cd nvarchar(10)) AS BEGIN .....................
Here is my set up, what is wrong here:
I Created these Variables:
Name Scope Data Type Value system_cd Locations String '03' location_type_cd Locations String Store
I added these parameter mappings in the Execute SQL Task
Variable Name Direction Data TypeParameter NameParameter Size User::system_cd Input NVARCHAR@system_cd -1 User::location_type_cd Input NVARCHAR@location_type_cd -1
I used this SQLStatement: EXEC dbo.sp_ml_location_load ?,
It runs the package successfully but it does not put the data into the table.
The data types of the fields are: Catalog_ID: bigint Product_ID: bigint IsBlocked: bit
I have two variables called "old_catalog_id" and "new_catalog_id" with the following values: old_catalog_id: 56789 new_catalog_id: 11111
Now, I would like to select all the recods, whose Catalog_ID fields equals the value in the variable "old_catalog_id" and insert identical recods with the "new_catalog_id" value.
The result of that operation on my sample records is:
My Solution: In order to realize this solution, I have created the following tasks on the Control Flow.
1. Create an Execute SQL Task for the selection. (Name: Selection Task) 2. Create a For-Each-Loop for iterating on the result set. (Name: Loop on results Container) 3. Create an Execute SQL Task inside the For-Each-Loop container for inserting the new records. (Name: Insertion Task)
Configurations and Problems: 1. Selection Task: General Tab: Result Set: Full Result Set SQL Statement: select Product_ID, IsBlocked from MyTable where Catalog_ID = ?
Parameter Mapping Tab: Variable Name -- Direction -- Data Type -- Parameter Name User:: old_catalog_version -- Input -- Large_Integer -- 0
Result Set Tab: Result Name -- Varibale Name 0 -- User::FullResultSet (which has the Data Type: Object)
When I execute this task, I get no records. Thus, I have hard-coded the value of Catalog_ID in the Sql Statement parameter. Now, I get the correct 2 records in the result set. Question 1: What am I doing wrong in the Parameter Mapping?
2. Loop on results Container: Collection Tab: Enumerator: Foreach ADO Enumerator ADO object source variable: User::FullResultSet Enumeration mode: Rows in the first table
Variable Mappings Tab: Variable -- Index User:: old_prod_id -- 0 (Data Type of "old_prod_id" is Int64) User:: old_isBlocked -- 1 (Data Type of "old_isBlocked" is Boolean)
When I execute the package, it fails with the following error message: Error: 0xC001F009 at SQL Tasks: The type of the value being assigned to variable "User:: prod_id" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Thus, I have changed the data type of the variable "old_prod_id" to Object. Now, the package runs successfully.
Question 2: Why isn't the package accepting "Int64" as the data type of my variable, although the corresponding DB field has the type "bigint"?
3. Insertion Task: General Tab: Result Set: None SQL Statement: insert into MyTable (Catalog_ID, Product_ID, IsBlocked) values (?, ?, ?)
Parameter Mapping Tab: Variable Name -- Direction -- Data Type -- Parameter Name User::new_catalog_version -- Input -- Large_Integer -- 0 User:: old_prod_id -- Input -- Large_Integer -- 1 User:: old_isBlocked -- Input -- Variant_Bool -- 2
When I execute this task, it fails with the following error message: Error: 0x0 at Insertion Task: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Catalog2Context_CATALOGS". The conflict occurred in database "XS_EC_CCH_PEGXSAP2", table "eSearch4.CATALOGS", column 'ID'.
Well, the message implicitly states that the value of the variable "new_catalog_version" has violated the mentioned FOREIGN KEY constraint. But I have set a breakpoint and I saw that the value was set correctly. So, it seems that the Execute SQL Task is not able to read the value of the variable correctly.
Question 3: What am I doing wrong in the Parameter Mapping, which causes the task not being able to read the value of the variables correctly?
The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4, The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3, The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3, The following Client4 accounts have A1 value and a blank A2 field. Accounts:
Desired output (no trailing comma):
The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4 The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3 The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3 The following Client4 accounts have A1 value and a blank A2 field. Accounts:
Next, how do I call the stored procedure without doing it RBAR? Is that possible?
