Provider cannot derive parameter information and SetParameterInfo has not been called. (Microsoft OLE DB Provider for Oracle)
I am getting the above error while opening the parameter box at OLEDB source for Oracle using SQL command option at Data Access Mode?? Can you any one please help me in this regard and trouble shoot this problem..
Hi,
I'm trying to use query parameters with an Oracle OLEDB Source in a data
flow task and I'm having problems.
I've tried formatting the query each of the following ways...
--
select
frq_code,
frq_name,
update_frq,
uptime_frq
from frequency_bcs
where update_frq > ?
and update_frq <= ?
--
Parameters cannot be extracted from the SQL command. The provider might not
help to parse parameter information from the command. In that case, use the
"SQL command from variable" access mode, in which the entire SQL command is
stored in a variable.
Additional information
---> Provider cannot derive parameter information and SetParameterInfo has
not been called. (Microsoft OLE DB Provider for Oracle).
Hi,
Urgent Help required..........
Can anyone explain me steps how to parameterized query to send oracle.
If you know any other control which help to do this rather than OLEDB source.
Please let me know.
THanks
Guys,
I am having a nightmarish time getting an Oracle Connection Manager working as a source in my SSIS package.
The CM is called "OLTP_SOURCE". When I inspect the configuration and test connection, it succeeds, however when I go to run the package (both in debug mode and via DTEXECUI) I get the following error:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
After this happens, if I go into an OLE DB Source within a DFT, I get the following:
No disconnected record set is available for the specified SQL statement.
Now, if I go back into the CM, enter the password and test, it succeeds. From this point, I will go to preview the data in the OLE DB Source, and it comes back fine. However, when I go to run the package, I get the same error time and time again:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
The quick reader will suggest that the password is not being persisted. To this end, I have tried each of the following techniques to no avail:
1. Double, Triple and Quadruple check that the "save" password option in the CM is checked.
2. Hardcode the connection string in the dtsx XML-behind.
3. Enable Package Configurations and hardcode the connection string in the dstsconfig file.
4. Run the dtsx file using DTEXECUI, providing it with the configuration (that includes the hard-coded password).
5. Run the dtsx file using DTEXECUI, providing it the connection string in the Connection Managager override UI.
Can anyone help shed some light on what might be going on? So far, it is obvious that there has to be something that I am doing wrong because (syntax dialect differences aside) I can't imagine that Oracle sources should be this much of a headache.
Thanks,
Rick
Hi,
Firtsly - I am new to SSIS if my approach could be improved then I welcome suggestions.
Scenario: I have a large SSIS package that consolidates / summarizes work week information from several data sources. Currently each data flow task in the control flow calculates the from and to date that is filtered on, for example:
DECLARE @FromDT AS DATETIME
SET @FromDT = CAST(FLOOR( CAST( DATEADD(D, -7, GETDATE()) AS FLOAT ) ) AS DATETIME)
DECLARE @ToDT AS DATETIME
SET @ToDT = CAST(FLOOR( CAST( GETDATE() AS FLOAT ) ) AS DATETIME)
I would like to remove these statements that appear in most steps and replace them with a global variable that is used throughout the package. This statement would only appear once & it would make the package much easier to run after failure etc.
Problem: I am using Data Reader Source with the 'SQLCommand' property specified. It looks like parameters are only supported if an OleDB connection is used?
So I switched to an OleDB connection and no parameters are recognised in the string - a forum search reveals that parameters in sub queries are not always found properly. The solution to this problem appears to be, to set 'Bypass Prepare' to True but this is a property for the Execute SQL task, not the Data Flow Task source.
Questions:
Does the Data Reader Source control from Data Flow Source toolbox section support parameters?
Can anyone suggest a fix to the OleDB Source issue with Parameters?
Is there a better way to solve my problem e.g. Using Execute SQL Task instead of Data Flow tasks etc
Example SQL:
This SQL is an example of the SQL for the OleDB Data Source (within a Data Flow task)
------------------------------
--RADIUS LOGINS
------------------------------
DECLARE @FromDT AS DATETIME
SET @FromDT = CAST(FLOOR( CAST( DATEADD(D, -7, GETDATE()) AS FLOAT ) ) AS DATETIME)
DECLARE @ToDT AS DATETIME
SET @ToDT = CAST(FLOOR( CAST( GETDATE() AS FLOAT ) ) AS DATETIME)
DECLARE @Attempts AS BIGINT
SET @Attempts =
(SELECT COUNT(*)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN @FromDT AND @ToDT)
DECLARE @Failures AS BIGINT
SET @Failures =
(SELECT COUNT(*)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN @FromDT AND @ToDT
AND Authen_Failure_Code IS NOT NULL)
DECLARE @Successes AS BIGINT
SET @Successes = @Attempts - @Failures
DECLARE @OcaV1Hits AS BIGINT
SET @OcaV1Hits = (SELECT COUNT(DISTINCT LoginName)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN
@FromDT AND @ToDT
AND EAPTypeID = 25)
DECLARE @OcaV2Hits AS BIGINT
SET @OcaV2Hits = (SELECT COUNT(DISTINCT LoginName) AS OcaV2Hits
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN
@FromDT AND @ToDT
AND EAPTypeID = 13)
SELECT
@Attempts AS ConnectionAttempts,
@Failures AS ConnectionFailures,
(CAST(@Successes AS DECIMAL(38,2)) / CAST(@Attempts AS FLOAT) * 100) AS SuccessRate,
@OcaV1Hits AS OcaV1Hits,
@OcaV2Hits AS OcaV2Hits
Please remember, I'm new to SSIS - so be detailed in your response. Thanks for your help!
Hi,
I have my datasource in Oracle9i and destination is Sql2005. I am connecting to Oracle 9i through OLEDb provider and when I connect to my DataSource using OLE DB Data Source, I get the following error:
Warning at "guid code": Cannot retreive the column code page info from the oledb provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale Id will be used.
Could anyone please help me trouble shoot this problem.
Regards,
Sudhakara.T.P.
sudhakaratp@hotmail.com
Hello All,
I understand that the parser is having issues parsing my second command but I was wonder if anyone had stumbled on a work around for this:
-- OLEDB Source has no problem with this:
SELECT *
FROM some_table
where
last_update_dt = ?
-- OLEDB Source errors on this:
SELECT *
FROM some_table
where
Convert( char(12), last_update_dt, 112 ) = Convert( char(12), Cast( ? as DateTime), 112 )
The first SQL statement won't return the desired rows because of the wonderful time stamp, the second works well but the provider won't parse it. I have used the "SQL command from variable" to work around this but we have some tables with 200+ columns, so the only way to use the "SQL command from variable" is to do a select *, which I'm trying to avoid, for both performance reasons and company standards.
Any thoughts?
Thanks,
Raymond
I need to delete some records in a Oracle RDBMS based at a SQL Server's query. I'm using the follow structure SSIS's package:
View 4 Replies View RelatedI want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following: . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
I am using execute sql task to run a stored procedure in oracle database which returns a resultset. This works. Now I need to send the ouput to a destination table in a sql database. Should I use for each loop to pick the resultset and insert it into the destination one by one (which I dont think is a great idea) or is there a better way to accomplish this task (in data flow task) ?
When I use dataflow task instead of execute sql task, the main issue is I am not able to see the output columns when I execute an oracle stored procedure, but when I see the preview I can see the resultset . But I can see the output columns for a sql server stored procedure.
In many DTS packages I have used parameterised queries for incremental loads from Oracle database sources using the Microsoft ODBC Driver for Oracle.
Now I want to migrate these packages to SSIS, but the OLE DB connection for Oracle does not support parameters.
I cannot use the "SQL command from variable" data access mode because of the 4000 character limitation on the length of string variables and expressions.
Am I missing an obvious workaround?
I am putting the below query in a OLEDB SOURCE through a variable (it is a select statement with a where clause from one date to another).
"select TestRecordtype, request_id from department
where LOAD_TMSTP between
(select max(END_TMSTP) LOG) and
(TO_DATE("+RIGHT("0" + (DT_STR,4,1252)DATEPART( "dd" , @[System:tartTime] ), 2) + "-"
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "mm" , @[System:tartTime] ), 2) + "-"
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "yy" , @[System:tartTime] ), 2) + " "
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "hh" , @[System:tartTime] ), 2) + "."
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "mi" , @[System:tartTime] ), 2) + "."
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "ss" , @[System:tartTime] ), 2) +",'DD-MM-YY HH24.MI.SS')) "
Can i extend the "Query Builder" dialog of OLEDB Source Editor for developing custom source component?
Hi,
I have an Integration Services project which creates a flat file report from Analysis Services, I'm using an OLE DB as data source and running an Openquery in the SQL statement.
the problem is that Integration services runs the query twice before getting the data into the flat file. I know this because the query runs two times in Profiler, and because the same query takes half the time when run in Management Studio.
Integration Services is running the whole query when validating. how can I disable this validation or better make it validate properly.
thanks
Learning how to use SSIS...
I have a data flow that uses an OLEDB Source Component to read data from a table. The data access mode is SQL Command. The SQL Command is:
select lpartid, iCallNum, sql_uid_stamp
from call where sql_uid_stamp not in (select sql_uid_stamp from import_callcompare)
I wanted to add additional clauses to the where clause.
The problem is that I want to add to this SQL Command the ability to have it use a package variable that at the time of the package execution uses the variable value.
The package variable is called [User::Date_BeginningYesterday]
select lpartid, iCallNum, sql_uid_stamp
from call where sql_uid_stamp not in (select sql_uid_stamp from import_callcompare) and record_modified < [User::Date_BeginningYesterday]
I have looked at various forum message and been through the BOL but seem to missing something to make this work properly.
http://msdn2.microsoft.com/en-us/library/ms139904.aspx
The article, is the closest I have (what I belive) come to finding a solution. I am sure the solution is so easy that it is staring me in the face and I just don't see it. Thank you for your assistance.
...cordell...
Hi all,
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
Hi everybody,
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails.
I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Please suggest me wht should i do know?
Thanks in advance
Regards
Arvind L
Is there a way to use the results of a query as parameters of a WHERE statement in Oracle?
I have a list in a SQL table that I would like to use as criteria for a query through Oracle? Basically I have two data sources; one Oracle and the other SQL, I'm currently querying the SQL one, then using a Merge Join object in SSIS to combine the data. The SQL query has roughly 2000 rows which is fine, however the Oracle one had several million... I've tried to limit the oracle one as much as I can however its still returning far too much data...
If anyone has any suggestions on how to do this I'd greatly appreciate it. I've looked into Linked servers, however this isn't an option with my set up due to account restictions on the Oracle server. Thanks and let me know if you require any other details
I am a beginner with Report Designer (and with Reporting Services). Following the tutorials 'Adding parameters to filter Reports ...' I tried using the @symbol to add a parameter to my query: where code = @code_value...I get the error: ORA -000936 missing expression (msorlib) Is there another syntax that I should use to define a parameter/variable in query for my oracle dataset?
View 4 Replies View RelatedHow can I run a single SP by asking multiple sales question eitherby using the logical operator AND for all the questions; or usingthe logical operator OR for all the questions. So it's alwayseither AND or OR but never mixed together.We can use Northwind database for my question, it is very similarto the structure of the problem on the database I am working on.IF(SELECT OBJECT_ID('REPORT')) IS NOT NULLDROP TABLE REPORT_SELECTIONGOCREATE TABLE REPORT_SELECTION(AUTOID INT IDENTITY(1, 1) NOT NULL,REPSELNO INT NOT NULL, -- Idenitifies which report query this-- "sales question" is part ofSupplierID INT NOT NULL, -- from the Suppliers tableProductID INT NOT NULL, -- from the Products table, if you choose--a ProductID, SupplierID is selected also by inheritenceCategoryID INT NOT NULL, -- from the Categories tableSOLDDFROM DATETIME NULL, -- Sold from which dateSOLDTO DATETIME NULL, -- Sold to which dateMINSALES INT NOT NULL, -- The minimum amount of salesMAXSALES INT NOT NULL, -- The maximum amount of salesOPERATOR TINYINT NOT NULL -- 1 is logical operator AND, 2 is OR)GOINSERT INTO REPORT_SELECTIONSELECT 1, 1, 2, 1, '1/1/1996', '1/1/2000', 10, 10000, 1 UNION ALLSELECT 1, -1, -1, 1, '1/1/1996', '1/1/2000', 10, 1000, 1You can ask all kinds of sales questions like:1-I want all employees that sold products from supplierID 1(Exotic Liquids), specifically the ProductID 2 (Chang) from theCategoryID 1 (Beverages) between Jan 1 1996 to Jan 1 2000 and soldbetween $10 and $10000 - AND for my 2nd sales question2-I want all employees that sold CategoryID 1 (beverages) betweenJan 1 1996 to Jan 1 2000 and sold between $10 and $1000I want to get the common result of both questions and find outwhich employee(s) are in this list.Here are some of the points:1-I want my query to return the list of employees fitting theresult of my sales question(s).2-If I ask three questions with the logical operator AND, I wantthe list of employees that are common to all three questions.3-If I ask 2-3-4. questions with the logical operator OR, I wantthe list of employees that are in the list of the 1st "successful"sales question (the first question that returns any employee isgood enough)4-You can ask all kind of sales question you want even if theycontradict each other. The SP should still run and returnnothing if that is the case.5-Let's assume you can have the same product name from the samesupplier but under different categories. So entering a ProductIDshould not automatically enter the CategoryID also; whereasentering the ProductID should automatically enter its SupplierID.6-SOLDFROM, SOLDTO, MINSALES, MAXSALES, OPERATOR are mandatoryfields, you can't leave them NULL7-SupplierID, ProductID and CategoryID are the dynamic inputparameters, there can be 5 different combinations to choose from:a-SupplierID onlyb-SupplierID and a ProductID,c-SupplierID and a CategoryIDd-SupplierID, ProductID and a CategoryIDe-CategoryID onlyf-Any time you choose a ProductID, the SupplierID valuewill be filled automatically based on the ProductID'srelationshipg-Any of the three values here that is not chosen by theuser will take a default value of -1 (meaning return ALLfor this Column, in other words don't filter by this column)The major problem I have is I can't use dynamic SQL for choosingthe three dynamic columns as the 2nd row of records would have adifferent selection of dynamic columns (at least I don't know howif the solution is dynamic SQL). The only solution I can think oflooks pretty bad to me. I would use a cursor, run each row at atime, store a TRUE, FALSE value to stop processing or not andstore the result in another detail table. Then if all ANDquestions have ended with TRUE do a union of all the result andreturn the common list of employees. It sounds pretty awful as anapproach. I am hoping there's a simpler method for achieving this.Does anyone know if any SQL book has a topic on this type ofquery? If so I'll definitely buy the book.I appreciate any help you can provide.Thank you
View 7 Replies View RelatedI am attempting to pass report parameters to my query. My report's data source is a WCF web service. I can run normal queries fine, but I have found that without the know-how to pass parameters to my query I am limited with my capabilities.
Assume a string parameter named "Name" with a specified default value of "Jmachol90", how would I pass that into the following query at the designated place:
<Query>
<Method Namespace="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" Name="SecurityPrincipalsGetRequest">
<Parameters>
<Parameter Name="Criteria" Type="XML">
<DefaultValue>
[code]....
hi,
can i use the acquireconnection method to an oledb for oracle connection manager?
i notice that in toolbox panel, there are these kind of different dataadapter and dataset, what is difference between them, and under which situation we use which one?
View 2 Replies View RelatedHelp, I'm attempting to connect to an Oracle 8 database using the microsoft OLD DB for oracle driver.
It works fine connecting to a 9i database but when I attempt to connect to the 8 database I get ORA-12537 TNS Connection Closed.
I can connect to the database fine using sqlplus on the machine.
Any ideas would be appreciated.
Thanks
Stapsey
I have several SSIS packages that test out without problems on my dev box when connecting to an Oracle server, both from inside BIDS IDE and from the command line with DTexec. The problem happens when running these packages from the app server that will be used for production; the packages get through the validation, preparation and pre-execution phases but crash when starting the execution phase with this error:
" Code: 0xC0202009
Source: Import Level tables Level1 Source [1261]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E07.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E07 Description: "ORA-01861: literal does not match format string".
I've Googled this and it often refers to a date issue. I am not writing to Oracle but importing to SQL Server by using SSIS import tasks, and my question is why would this work without problems from my box but not on this app server? Both machines have the same version of Oracle client installed. My box has the client SQL server with BIDS and the app server only has the full version of SSIS without SQL Server installed. At this point I'm trying to determine if this is an Oracle issue or SSIS. Any ideas?
Hi,
Previously i was using oracle8i with ssis.ssis was working fine.later i have upgraded 8i to oracle 9i.now when ever i try to establish a new connection using Microsoft OLEDB Provider for Oracle.i am getting the following error "Oracle error occurred, but error message could not be retrieved from Oracle" .but i am able to access the oracle 9i database thru pl/sql and toad. what could be the problem?
Thanks
Jegan.T
I was having one package which uses a source query in OLEDB Source Control and fetches the record and a couple of lookups and then an oledb command to insert/update the records in the table using as SP. I changed the source query(Infact the package) and removed in lookup and a different SP was called similar to the old one. But my problem is the package which was before taking only minutes to update 50,000 records is now taking more than 2 hrs. The problem is the number of records it is fetching from the source each time is very less.. its fetching hardly 500 records a time compared to nearly 2500 records before. Where am i going wrong? Any suggestion greatly appreciated.
View 5 Replies View RelatedHi,
I am running an MDX query in SSIS but I don't know what is the best way of doing this, performance wise.
I know I can run the MDX query through an openquery in the OLEDB, and also run it through a Datareader, no openquery needed.
I know the datareader is slower in a normal basis due to .Net, but in this case the OLEDB is running an open query to a linked server which won't be fast like running a regular SQL.
If anyone knows which of this two run faster in this scenario I'll appretiate if you let me know.
Iam migrating data from one database to another .I want give input of that source and traget database names through globally declared user variables (@sourcename,@targetname)
How i can map the variables in OLE DB Source ..i dint find any option to that .
Can somebody help ?
Thanks
Kumar
Trying to used DTS from SQL Server 7 to import a table from Oracle 8 DB to SQL Server. SQL Server has Oracle 8 connectivity installed and a database instance setup. Connection using the instance works from Oracle Enterprise manager and all Oracle tools. The MS OLEDB provider for Oracle fails to connect : could not resolve service name. I have this working on a different server with the same setup (SQL Server 7 SP 2 + All Oracle 8.0.5 connectivity).
WHAT AM I MISSING?
Windows 2003(64bit) server, SQL 2005 Server(64bit), Oracle client 10G rel2 (64bit) is installed. But when I am going to create a datasource to the Oracle database the Oracle OLEDB Provider is missing, the only Providers avaliable is from Microsoft.
I have tried to install ODAC (64bit) with no result.
Anyone who have come across this problem and how do I do to resolve it?
BTW! Is there a way to try communication with the OLEDB provider from the commandprompt?
hi,
i am using oledb to connect to oracle.
i want to know if there is a way to handle different character sets in this type of connection. for sql to sql, i have been using auto translate in the connection string.
what about for sql oledb to oracle? how can i make sure that the data from sql to oracle is transferred as is?
many thanks.