Parameters do not appear when I jump to a linked report. What causes the parameters not to appear? I did not make them hidden, so why do they not appear? I can see them when I am within visual studio, but not when the report is published to the web?
View 3 Replies
I have generated a .dsv using named queries.
The dsv consists of 3 tables:
1)CLIENT
2)client_guarantor.
3)client_contacts.
The client_guarantor and client_contacts tables both have a foreign key into the CLIENT table via the column CLIENT.client_id. To give you a visual, the .dsv design view would look something like this:
client_guarantor <- CLIENT -> client_contacts.
I use this .dsv to generate a model and deploy it. My problem arises once I get into report builder. It will not let me build a report that uses columns from all three tables. For instance, if i pull a column from the CLIENT table, then a column from the client_contacts table, and next try to get anything from the client_guarantor table, report builder lets me navigate back to the client_guarantor table (because i have added a column from CLIENT) but wont let me add any columns from client_guarantor to the report.
Am i missing something? I assume that since the CLIENT table can see both the client_guarantor and client_contacts tables, if I add anything from the CLIENT table into my report, I should have access to both other tables located in my model. Am I wrong in this assumption, or do I need to add some flag to my model or something??? Any help or insight is appreciated.
In the data flow, I have an "OLE DB source" container that calls an SP. The SP does a select statement at the end. If I hit the "Preview" button I'm seeing the results come back, however, when I go to the columns I'm not seeing anything. I don't see the column name. Is there any reason why I don't seem to see this column coming back?
Thanks,
Phil
Second post for the day. I've just noticed a few indexes in our tables that have are named like such: hind_c_207_1. They seem to have been put in automatically, and are messing with our index structure. Anyone know where these come from and how I can stop them? Any help would be great.
View 2 Replies View RelatedGreetings.I am trying to add some debug to a stored procedure.I put some statements like this throughout the code:select 'some message here';but I never see them.I put them in a test procedure that works fine, so that I have a feeling thatwhen an insert fails in a down-stream try catch block, it messes up thedisplay of the information.Can someone tell me how to best go about outputting debug I can see from astored procedure, or if I am even correct about try catch blocks throwingerrors, messing up the debug visibility.I can post code if necessary. Just a general debug question here.thanksJeff Kish
View 2 Replies View RelatedHi,We have a SQL server db backend for our ERP system. I have written aCrystal Report to extract data from one particular table calleditemspecbomw (c.30000 records) which contains amongst other thingsBill of Materials costings. When I run the report I know that somerows are missing as when I look at values through the ERP systemitself, the values are different.What I have found is that when I run the equivalent ERP system report,the Crystal Report I have written shows extra rows. SQL Query Analyserbehaves exactly the same as the report I have written even when usinga "select * from". I have tested opening up a bigger tables (c. 700000records) which appears without a problem. If anyone knows why thismystery is happening, I woould be grateful for your help.Many thanks,Tony.
View 2 Replies View RelatedHello,
I am trying make some imports and I am using the wizard.
I have created a new project and added 2 new datasources. One for a DB2 database and one for a SQL Server database
I select Project | SS Import and Export Wizard and the wizard launches.
When I look under datasource I can't find my 2 created datasources. I can create new ones but this is not something I want.
Any help ?
Constantijn Enders
i have a list which is hidden at the top of my body and then some text boxes afterwards...this should all fit on the first page, but as soon as one of my textboxes has an expression the rest of the data skips to the second page
View 3 Replies View Related
I have setup a merge replication publication (SQL server 2005 wth SQL Mobile) with dynamic filters based on host name and when i sync to the pda all data appears fine. When I make changes on the PDA and synchronise, the changes are pushed back to the server fine.
However when I change data on the server and synchronise at the PDA, no changes ever appear!
Surely I must have missed something obvious or done something really stupid.
If i check the replication monitor it just says no changes so any suggestions would be great.
Thanks,
Andy
Hi all, newbie here (to SQL Server and Visual Studio)...
After a few days of configuring and setting things up, I finally got visual studio 2005 to connect to my sql server 2005 express database. I used server management studio to construct a database with 8 linked tables for my first main application. I plugged in some data and, after setting up proper permissions, was able to get visual studio to connect and return data.
I set up a simple gridview on a page with a sql server connection object to test things out. When I set the connection string to return data from a single table, everything works fine. When I test the connnection within visual studio, I get the results I expect. I build the page and load it up in my browser through the localhost, and I get the expected results.
The problem comes when I try to use a view rather than a table. I build the view in server management studio, and from within visual studio, when I test the connection I get the expected results. However, after building the pages (and rebuilding the site), I get a blank grid in my broswer when I test through localhost. I added another gridview to the page set to a table with a different connection string, and that grid appeared in my browser. I modified that connection string in visual studio to the sql server view, and again, nothing appears in my browser.
I'm not sure if, during all of my tinkering with security and setups I may have inadvertantly shut off the abilty to use views, but I'm not receiving an error messages. I just get a blank page.
Any ideas?Brian
A couple of databases on one of our SQL Servers is missing in the dbdropdown in query analyzer.Does anyone know what I need to update to sync this with the actualdatabases?Thanks,Burt
View 1 Replies View RelatedI recently restored my database from a backup and it seems that something in my service broker setup has stopped working, no messages now appear.
I checked that the broker was enabled (it wasnt and i had to use NEW_BROKER because of the 'same id' message)
The database is still set to trustyworthy.
There are also no messages in sys.transmission_queue
I used profiler with all the broker events enabled and the result was as follows:
Broker:Conversation Group
Broker:Conversation STARTED_OUTBOUND
Broker:Conversation CONVERSING
Broker:Message Classify
Broker:Conversation CLOSED
Broker:Conversation Group
Broker:Message Classify
But i'm not sure whether this highlights a problem or not? Any help gratefully appreciated!!
Thanks,
Andy
Hi,
I have created an SQL Server instance in SQL Server Management Studio. I have a few databases, and stored procedures in them. When I right click on the stored procedure, I have the menu for "New Stored Procedure, Modify, Script Procedure as, and so on". But, I could not see the "Execute Stored Procedure" item.
Could any one help to find out what could be the problem and solve it?
Thanks,
Luke.
I got a script, which ran on SQL Server 7. After compiling on SQL Server 2012, I came across that the previous script used a system ViewsTables columns named "suid", which no longer operate in SQL Server 2012. After modifying the script with 2012 and replaced suid by SID, it works but the suid column is not appearing in System Views. What if we want to get that column back in SQL Server 2012? is there any possible way?
View 3 Replies View RelatedDuring an upgrade, we had problems with PK errors on sp_MSget_repl_commands. I recreated the SP with the varbinary characteristic as we have seen in many posts and it was sucessful in starting. However, the sp now appears as a 'user' sp, not a 'system' sp, however I an not sure that is a real issue.
The problem I am seeing is that none of the agents are appearing in replication monitor under their agent folders. Replication appears to be working fine and the publications are showing on the distributor in the Replication Monitor - Publication folder under the appropriate publisher. But all of the agent specific folders (i.e. Snapshot agent, distribution agent, etc) are empty.
Another interesting point, is that if replication fails, the failure 'X' shows up on the Agents folder as well as the publisher, but again, no sign of the agent in the folder.
Thoughts?
I'm having a heck of a time with named queries. At this point I just want a proof of concept in my DSV. I have a bunch of tables added to the DSV, and I would like to add a named query to it so the user can pick from the name query in report builder. What has to be done to make it appear in the report builder?
View 1 Replies View RelatedHi all
I have the following tables:
Code Snippet
CREATE TABLE #Lkp_Circle
(
ID INT ,
Abbreviation varchar(50)
)
GO
CREATE TABLE #Lkp_OtherCircles
(
Circle varchar(50)
)
GO
CREATE TABLE #Tbl_User
(
ID INT,
Name VARCHAR(50),
IsActive bit
)
GO
CREATE TABLE #Tbl_UserDetails
(
AssociateID INT,
CircleID INT
)
GO
INSERT INTO #Lkp_Circle VALUES (1,'C1')
INSERT INTO #Lkp_Circle VALUES (2,'C2')
INSERT INTO #Lkp_Circle VALUES (3,'C3')
INSERT INTO #Lkp_Circle VALUES (4,'C4')
INSERT INTO #Lkp_Circle VALUES (5,'C5')
INSERT INTO #Lkp_Circle VALUES (6,'C6')
INSERT INTO #Lkp_Circle VALUES (7,'C7')
GO
INSERT INTO #Lkp_OtherCircles VALUES ('C3')
INSERT INTO #Lkp_OtherCircles VALUES ('C4')
INSERT INTO #Lkp_OtherCircles VALUES ('C5')
INSERT INTO #Lkp_OtherCircles VALUES ('C6')
GO
INSERT INTO #Tbl_User VALUES ( 101,'U 1','True')
INSERT INTO #Tbl_User VALUES ( 102,'U 2','True')
INSERT INTO #Tbl_User VALUES ( 103,'U 3','True')
INSERT INTO #Tbl_User VALUES ( 104,'U 4','True')
INSERT INTO #Tbl_User VALUES ( 105,'U 5','True')
GO
INSERT INTO #Tbl_UserDetails VALUES(101,3)
INSERT INTO #Tbl_UserDetails VALUES(102,4)
INSERT INTO #Tbl_UserDetails VALUES(103,5)
INSERT INTO #Tbl_UserDetails VALUES(104,5)
INSERT INTO #Tbl_UserDetails VALUES(105,3)
GO
SELECT ISNULL(Circle,'Total') Circle, ISNULL(COUNT([HeadCount]),SUM(1)) AS [Total]
FROM
(
SELECT DISTINCT 'Circle' = CASE
WHEN #Lkp_Circle.Abbreviation IN (SELECT Circle FROM #Lkp_OtherCircles) THEN #Lkp_Circle.Abbreviation
WHEN #Lkp_Circle.Abbreviation NOT IN (SELECT Circle FROM #Lkp_OtherCircles) THEN 'Others'
ELSE 'Total' END,ISNULL(#Tbl_UserDetails.AssociateID,0) AS 'HeadCount'
FROM #Tbl_User INNER JOIN #Tbl_UserDetails ON #Tbl_User.ID = #Tbl_UserDetails.AssociateID INNER JOIN
#Lkp_Circle ON #Tbl_UserDetails.CircleID = #Lkp_Circle.ID
WHERE #Tbl_User.IsActive='True' AND #Tbl_User.ID>0 AND #Tbl_UserDetails.AssociateID>0
) AS PivotTable
GROUP BY Circle
WITH Cube
DROP TABLE #Tbl_User,#Tbl_UserDetails,#Lkp_Circle,#Lkp_OtherCircles
----EXPECTED RESULT
--Circle HeadCount
--C3 2
--C4 1
--C5 2
--C6 0
--Others 0
--Total 5
--
----ACTUAL RESULT
--Circle HeadCount
--C3 2
--C4 1
--C5 2
--Total 5
The criteria for Others is that those circles which are not part of #Lkp_OtherCircles i.e. C1,C2,C3 and C7 clubbed together. I have tried checking for the condition ISNULL when for that circle there is no user but the end result is same. Can someone tell me where I am going wrong and how to correct it?
Hi All,
I have a stored procedure (works form the SQL side). It is supposed to update a table, however it is not working, please help. What is supposed to happen is I have a delete statement deleting a payment from the payment table. When the delete button is pushed a trigger deletes the payment from the payment table and transfers it to the PaymentDeleted table. The stored procedure is supposed to update the PaymentDeleted table with the empID and reason for deleting, the delete and transfer work fine, however these 2 fields are not updated. Below is the sp and below that is the vb code. Thanks, Karen
ALTER PROCEDURE dbo.PaymentDeletedInfoTrail (@EmpID_WhoDeleted varchar(10), @Reason_Deleted varchar(255), @PmtDeletedID int)
AS
BEGIN
UPDATE dbo.PaymentDeleted
SET EmpID_WhoDeleted = @EmpID_WhoDeleted
WHERE PmtDeletedID = @PmtDeletedID
UPDATE dbo.PaymentDeleted
SET Reason_Deleted = @Reason_Deleted
WHERE PmtDeletedID = @PmtDeletedID
END
Private Sub cmdSubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdSubmit.Click
Me.Validate()
If Me.IsValid Then
Dim DR As SqlClient.SqlDataReader
Dim strPmtID As String
strPmtID = lblPmtIDDel.Text
Dim MySQL As String
MySQL = "DELETE From Payment WHERE PmtID = '" & strPmtID & "'"
Dim MyCmd As New SqlClient.SqlCommand(MySQL, SqlConnection1)
SqlConnection1.Open()
DR = MyCmd.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
SqlConnection1.Close()
Dim strDeletePmt As String
strDeletePmt = lblPmtIDDel.Text
Dim cmd As New SqlClient.SqlCommand("PaymentDeletedInfoTrail", SqlConnection1)
cmd.CommandType = CommandType.StoredProcedure
Dim myParam As SqlClient.SqlParameter
myParam = cmd.Parameters.Add(New SqlClient.SqlParameter("@PmtDeletedID", SqlDbType.Int))
myParam.Direction = ParameterDirection.Input
myParam.Value = lblPmtIDDel.Text
myParam = cmd.Parameters.Add(New SqlClient.SqlParameter("@EmpID_WhoDeleted", SqlDbType.VarChar))
myParam.Value = txtEmpIDDelete.Text
myParam = cmd.Parameters.Add(New SqlClient.SqlParameter("@Reason_Deleted", SqlDbType.VarChar))
myParam.Value = txtDeleteComments.Text
SqlConnection1.Open()
cmd.ExecuteNonQuery()
SqlConnection1.Close()
End If
Response.Redirect("PaymentVerification.aspx")
End Sub
I have an SSAS cube that i want to add some actions to. I've had problems adding a reporting action to the cube so decided just to add a URL action instead. Start simple and build on the concepts...
So i add a new action, give it a name, set the Target Type to Cells, Taget object to All Cells. I've put no condition on the action since i want it to appear all the time.
The action content type is set to URL the action expression is set to [URL] I've also set a caption of "Google" under the additional properties and said that the caption is MDX (I'm aware that it isn't but i do intend to expand on this...).
I then build and deploy my cube, call up excel (2010) and then create a pivot table off the back of the cube but when i right-click the cells in the pivot table and go to "additional actions" it tells me that there are none specified.
[URL]
I have 4 sets of select queries under 1 stored proc, now on the report calling the stored proc via dataset. when i run the dataset the only first set of the select query related fields appearing under the dataset.
But on the back end sql server, if i execute the same stored proc, i get 4 resultsets in one single executioln.
i am not seeing the remaingin 3 resultsets, on the reports dataset.
Is it possible on the reports or not.
In the asp.net project i was able to use that kind of stored procedures whcih has multiple select statements in 1 procedure., i use to refer 0,1,2,3 tables under a dataset.
Thank you all very much for the information.
I have created a job which executes a procedure which executes and creates logs of StartTime and EndTime and records affected. The last step of the job sends mails to recipients from the logs table. Though I get the info correctly I get all annoying dashes for 4-5 lines between each line of message. How to remove the dashes.
Below is the code i use to send mails.
EXEC msdb.dbo.sp_send_dbmail
@profile_name='SQL Mail Service',
@recipients='biscribbler@gmail.com',
@copy_recipients='biscribbler@gmail.com',
@subject='SOFT SCRUB Completed for LiveDB',
[Code] ....
I had to import some FileMaker Data into SQL Server 2005 and in the resume field a "SQUARE" special character is appearing everyplace that a return should be.
It has really messed up the formatting. I know how to use the updatetext in a cursor to replace the special character but I don't know what to replace the "SQUARE" special character with so the text is displaying a new line rather then this "SQUARE" character.
Any help would be appreicated.
I have SQL Server set up on a server and I can't see the Agent in Management Studio.When I check the services it says it is there and started.I have the Enterprise edition installed.it doesn't show when I am on the server itself through Management Studio, however, on my local pc, when I connect to the server through Management Studio, I can see the Agent through there and I have jobs there that run successfully and everything.Its just when I log directly on the box and load up Management Studio.
View 9 Replies View RelatedI built my first tabular model and see that my fact tables are also appearing as dimensions. In Multi dimensional mode i could choose which are the dimensions. How do i do that in tabular model.
View 2 Replies View RelatedHi I have completed my first SSIS master package which runs a whole lot of child packages depending on value of expressions on workflow. (refer http://www.sqlis.com/306-3.aspx)
Each of my child packages is .dtsx file location and each Excute Package task uses the file connection.
The master parent package is also a dtsx file location which will be run by a SQL Server 2005 Agent
All good--problem is testing from BIDs--each time a Excecute package task is run--turns yellow a new tab appears apears in the design window --showing you that particular .dtsx file control flow detail. DTS never had this behaviour --can I turn this off in the BIDS ie as I have dozens of new tabs at run time which makes it very hard to keep track of the master package. All I want is the master package running from BIDs, and no new tabs appearing at run time???
Thanks kindly
Dave
I am trying to install the MS SQL Server 2012 Failover Cluster on Windows Server 2012 . I successfully Installed the Failover cluster instance on my primary node.
But when I am running the installation process on passive node to add node in the failover cluster I am stuck with very unique kind of issue.
I am following the Standard process of Installation and I am getting the same windows for each next process, but after License Agreement window when I get the Cluster Node Configuration window, then in "SQL Server Instance Name" drop down box I am not getting the Name of Instance which is already installed on the primary node. But this Instance complete information is appearing in below given box.
Only issue is Instance name is not appearing in the drop down list, that's why I am not able to select and when I click on next it trough error and do not proceed.
As the title states I have a 64bit DSN but when I try to create ODBC datasource in Reporting Services it does not appear in the dropdown box. I have created as a system DSN.
SQLServer 2008R2
Reporting Services 2008
I am trying to get a null value to pass to a multi-select parameter in SSRS 2005. The multi-select box is getting its possible values from the following query:
SELECT NULL CMP_ID, '<all companies>' COMPANY UNION SELECT DISTINCT T1.CMP_ID, T1.COMPANY FROM VIEWCOMPANYLIST T1 WHERE T1.DIV_ID = 2 ORDER BY 1
This query is pre-pending a row with NULL as the first ID. The resulting data set is exactly what you would expect - Row 1 has a null in column CMP_ID, and <all companies> in column COMPANY. All the rest of the rows have proper data. My multi-select parameter box is of type Multi-value Int, with possible values populated by this query and a default of NULL. However, when I preview the report, the <all companies> row disappears.
It's not even in the list, and it's not getting selected by the default selector. So, of course, when I try to View Report without selecting anything, I get prompted to select a company. Why the prepended row in my dataset is getting dropped from the multi-select box at display time? And yes, I have to be able to pass a null value because the stored procedure on which the report is based expects this parameter to be optional.
I am using execute sql task to run a stored procedure in oracle database which returns a resultset. This works. Now I need to send the ouput to a destination table in a sql database. Should I use for each loop to pick the resultset and insert it into the destination one by one (which I dont think is a great idea) or is there a better way to accomplish this task (in data flow task) ?
When I use dataflow task instead of execute sql task, the main issue is I am not able to see the output columns when I execute an oracle stored procedure, but when I see the preview I can see the resultset . But I can see the output columns for a sql server stored procedure.
I have provided required permissions, still user not able to view report builder option in his console.
what could be wrong? what needs to be done to provide report builder to users.
Deleep P
Hi all,
From the "How to Call a Parameterized Stored Procedure by Using ADO.NET and Visual Basic.NET" in http://support.microsft.com/kb/308049, I copied the following code to a project "pubsTestProc1.vb" of my VB 2005 Express Windows Application:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlDbType
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim PubsConn As SqlConnection = New SqlConnection("Data Source=.SQLEXPRESS;integrated security=sspi;" & "initial Catalog=pubs;")
Dim testCMD As SqlCommand = New SqlCommand("TestProcedure", PubsConn)
testCMD.CommandType = CommandType.StoredProcedure
Dim RetValue As SqlParameter = testCMD.Parameters.Add("RetValue", SqlDbType.Int)
RetValue.Direction = ParameterDirection.ReturnValue
Dim auIDIN As SqlParameter = testCMD.Parameters.Add("@au_idIN", SqlDbType.VarChar, 11)
auIDIN.Direction = ParameterDirection.Input
Dim NumTitles As SqlParameter = testCMD.Parameters.Add("@numtitlesout", SqlDbType.Int)
NumTitles.Direction = ParameterDirection.Output
auIDIN.Value = "213-46-8915"
PubsConn.Open()
Dim myReader As SqlDataReader = testCMD.ExecuteReader()
Console.WriteLine("Book Titles for this Author:")
Do While myReader.Read
Console.WriteLine("{0}", myReader.GetString(2))
Loop
myReader.Close()
Console.WriteLine("Return Value: " & (RetValue.Value))
Console.WriteLine("Number of Records: " & (NumTitles.Value))
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The original article uses the code statements in pink for the Console Applcation of VB.NET. I do not know how to print out the output of ("Book Titles for this Author:"), ("{0}", myReader.GetString(2)), ("Return Value: " & (RetValue.Value)) and ("Number of Records: " & (NumTitles.Value)) in the Windows Application Form1 of my VB 2005 Express. Please help and advise.
Thanks in advance,
Scott Chang
I have a SSRS report with four parameters,and I want to be able to enter information for two of the parameters and run the report opposed to all four of them. However, when I select allow blanks and only select the parameters that I want to run the report by, the report come back blank..Essentially, I want to be able to the run report by different parameters without having to enter information for all parameters at the same time.
View 2 Replies View RelatedHi,
I have an app in C# that executes a query using SQLCommand and parameters and is taking too much time to execute.
I open a SQLProfiler and this is what I have :
exec sp_executesql N' SELECT TranDateTime ... WHERE CustomerId = @CustomerId',
N'@CustomerId nvarchar(4000)', @CustomerId = N'11111
I ran the same query directly from Query Analyzer and take the same amount of time to execute (about 8 seconds)
I decided to take the parameters out and concatenate the value and it takes less than 2 second to execute.
Here it comes the first question...
Why does using parameters takes way too much time more than not using parameters?
Then, I decided to move the query to a Stored Procedure and it executes in a snap too.
The only problem I have using a SP is that the query can receive more than 1 parameter and up to 5 parameters, which is easy to build in the application but not in the SP
I usually do it something like
(@CustomerId is null or CustomerId = @CustomerId) but it generate a table scan and with a table with a few mills of records is not a good idea to have such scan.
Is there a way to handle "dynamic parameters" in a efficient way???