Parent Child Integration Using Configuration File
Jul 11, 2007
Hi All,
I though i'd been going about setting up my SSIS package to run via a SQL job in the correct way. It would appear however that is not the case.
I have 4 SSIS packages, one of which is the parent package which calls the other three in sequence. I want to run this from a SQL job so that it calls the parent package and it deals with the others. There are connection managers in the package which use a SQL account to access the relevant databases. In addition i have encrypted the package.
I have set up a configuration file which holds the password package and the BillingSystem connection manager password. This file is re used by each package.
After deployment i have set up the SQL agent job to run the parent package. The job returns an error. Looking at the SSIS logging it appears that it completes the SQL task in the parent package and then fails when trying to launch each of the sub packages with an error stating that the SQL account used in the connection manager login failed. It looks as though the sub packages are not getting the password value from the configuration file and this is causing the failure. I though that each package would automatically pick up the config file as it has been setup to do. I have specified the configuration file in the SQL job but this appears to make no difference. Running the integrations seperately i have to add the configuration file in manually to the Run Package dialog box before they will work. This is not saved for the next run.
Can anyone help me get around this problem as i think i have the wrong idea as to how it is supposed to work.
Cheers,
Grant
View 4 Replies
ADVERTISEMENT
Sep 14, 2006
Hi guys,
Here's the deal. I have a child package, (say, pack01.dtsx), which uses a dtsconfig file for its connection string, which can be called from other packages, but which also can be called by itself.
However I also have another package (say, pack02.dtsx) which uses the same dtsconfig file for its connection string. It calls on pack01.dtsx.
When I use DTEXECUI and run pack01.dtsx, specifying the proper .dtsconfig file, it goes well. But when I try and run pack02.dtsx, an error occurs saying pack01.dtsx connection cannot be established.
How do I pass the connectionstring being used by pack02 to pack01, without having to remove the configuration file setting of pack01? Can a Parent Package configuration and a configuration file try and map to the same property?
Hope someone could help. Thanks.
View 7 Replies
View Related
May 3, 2007
Hi,
I've found this problem that when I change settings in my configuration file it does not automatically apply to all child packages which uses the same configuration file if run from a job in SQL Server Agent. I need to open the package and save it again from BIDS. I use one "load group" package to execute all other packages.
Is there a way from the job configuration to set a setting so the package allways will have the newest configuration?
Regards
Simon
View 7 Replies
View Related
May 19, 2015
Given the sample data and query below, I would like to know if it is possible to have the outcome be a single row, with the ChildTypeId, c.StartDate, c.EndDate being contained in the parent row. So, the outcome I'm hoping for based on the data below for ParentId = 1 would be:
1 2015-01-01 2015-12-31 AA 2015-01-01 2015-03-31 BB 2016-01-01 2016-03-31 CC 2017-01-01 2017-03-31 DD 2017-01-01 2017-03-31
declare @parent table (Id int not null primary key, StartDate date, EndDate date)
declare @child table (Id int not null primary key, ParentId int not null, ChildTypeId char(2) not null, StartDate date, EndDate date)
insert @parent select 1, '1/1/2015', '12/31/2015'
insert @child select 1, 1, 'AA', '1/1/2015', '3/31/2015'
[Code] .....
View 6 Replies
View Related
Aug 8, 2013
How to pass variable from Parent to child and child to Parent Packages is this possible in SQL SSIS 2012. I need this only in SSIS 2012 ...
View 6 Replies
View Related
May 25, 2006
I have a file with a parent child records in the same file.
My game plan is to get it into a table recognize the parents and put them in the parent table and recognize the children and put them in the children table.
The problem I am having is the flat file import chokes on it because the column withs are different from line to line (parent / child).
Any thoughts or suggestions would be apprecaited.
Mardo
View 1 Replies
View Related
Mar 19, 2007
I have a set of parent/child records that need to be exported to a space delimited Flat File. Each parent record must be followed by 3 child records, each on their own line with different format.
I have a prototype using the Derived Column component that concatinates the various fields of each record into one "wide" text column. This fools SSIS to think that each row has the same format. Then I merge them together using an artificial sort id. But this seems overly tedious and very brittle.
What would be the best approach to writing these records out? I'm hoping there is a better more maintainable method.
Thanks,
Jon
View 4 Replies
View Related
May 21, 2007
Hi,
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
-Prashant
View 4 Replies
View Related
Oct 9, 2015
I want to achieve the following in (SSIS/SSDT for SQL 2012) -
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
View 8 Replies
View Related
Jul 25, 2014
Basically i have three Tables
Request ID Parent ID Account Name Addresss
1452 1254789 Wendy's Atlanta Georgia
1453 1254789 Wendy's Norcross Georgia
1456 1254789 Waffle House Atlanta Georgia
Bid_ID Bid_Type Bid_Volume Bid_V Bid_D Bid_E Request_ID Parent ID
45897 Incentive 10 N/A N/A N/A 1452 1254789
45898 Incentive 10 N/A N/A N/A 1453 1254789
45899 Incentive 10 N/A N/A N/A 1456 1254789
Bid_Number Bid_Name Request_ID Parent ID
Q789456 Wendy'Off 1452 1254789
Q789457 Wendy'Reba 1452 1254789
Q789456 Wendy'Off 1453 1254789
Q789457 Wendy'Reba 1453 1254789
Q789456 Wendy'Off 1456 1254789
I want the Result
Parent ID Bid_Type Bid_Volume Bid_V Bid_D Bid_E AutoGeneratedCol
1254789 Incentive 10 N/A N/A N/A 1
1254789 Incentive 10 N/A N/A N/A 2
Bid Number AutoGeneratedCol_Link
Q789456 1
Q789457 1
Q789456 2
Request ID AutoGeneratedCol_Link
1452 1
1453 1
1456 2
View 1 Replies
View Related
Jun 26, 2015
I have a table with below kind of data,
DECLARE @TBL TABLE (ItemId INT IDENTITY(1,1), ItemName NVARCHAR(20), ItemDate DATE, ParentItemName NVARCHAR(20), ItemOrder INT, ReportId INT)
INSERT INTO @TBL (ItemName, ItemDate, ParentItemName, ItemOrder, ReportId)
VALUES ('Plan', '2015-06-01', NULL, 1, 20),('Design', '2015-06-01', NULL, 2, 20),('Test', '2015-06-20', NULL, 3, 20),('Complete', '2015-06-30', NULL, 4, 20),
('Design child A', '2015-06-02', 'Design', 1, 20), ('Design child B', '2015-06-01', 'Design', 2, 20),
('Test child A', '2015-06-10', 'Test', 1, 20), ('Test child B', '2015-06-09', 'Test', 2, 20), ('Test child C', '2015-06-08', 'Test', 3, 20),
('Test grand child A', '2015-06-08', 'Test child B', 1, 20), ('Test grand child B', '2015-06-08', 'Test child B', 2, 20)
select * from @TBL
Here I want,
1. to display all parent with ORDER BY ItemOrder (no need to sort by ItemDate)
2. display all child row right after their parent (ORDER BY ItemOrder if ItemDate are same, else ORDER BY ItemDate)
3. display all grand child row right after their parent (ORDER BY ItemOrder if ItemDate are same, else ORDER BY ItemDate)
Looking for below output ...
View 3 Replies
View Related
Mar 12, 2013
I attempted to use Move Directory to move the contents of one directory to another. I encountered the 'different volume' issue that others have experienced. While this error is frustrating I can work past this particular issue. My more pressing question is why is the move directory command overwriting a destination directory?
When I setup the Move directory file task I provided two vars to hold src and dest location:
dest var: estserveroutput
src var: devserverdev estfiles
Set overwrite destination = TRUE
Why would Move Directory overwrite output folder at destination? Shouldn't it only overwrite if the testfiles directory exists at destination? This is very frustrating since I cannot find enough information in the official documentation to understand what is happening here.
Is it just me or does the documentation for Move directory seem.....incomplete?
View 4 Replies
View Related
Jul 29, 2015
I've used XML package configuration in my packages in order to populate key variables. The configuration String is pointing to a local folder in my machine. After that, I've checked my whole solution into TFS. I did check the checked in file but could not find the .dtsConfig XML file. The problem occurs when the other teammate checked out this solution from TFS into his own box. When he tried to open the solution, it gives warning (not error though) saying it could not find the package configuration file.machine does not have the same URL I had in my box. In situation like this, how can we fix in the multi-developers SSIS environment?
View 2 Replies
View Related
Nov 3, 2015
We deployed the ssis package to SQL server and now trying to configure but it only allow use to change environmental variables there is no option to browse and select XML configuration file. Does this mean when you are using SQL server deployment mode u can only use environmental variable ?
View 3 Replies
View Related
May 19, 2004
Huh?
I've got good RI data...BUT..a developer loaded the tables in alpha table order....
Such that the child loaded BEFORE the parent....
Huh?
Got a test being set up now to mess with the child file to add a key that doesn't exist in the parent...
But Why is this allowed?
In DB2 you can specify
LOAD DATA REPLACE NO CHECK....
On the load card...you then need to run a check after to verify the data...
Is that what's going on? Is there such a utility in SQL Server to run a check post load?
I'm confused....
Any comments appreciated.
Thanks
Brett
8-)
View 2 Replies
View Related
Feb 25, 2008
hi,
i have two tables i want the identity value of the parent table to be inserted into the chile table
here is my code,but i don't know why it isn't working !
protected void Button1_Click(object sender, EventArgs e) { string connectionString = ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString; string pcontent = TextBox1.Text; string data = TextBox2.Text; addtopic(pcontent,connectionString); addfile(data, connectionString); } public void addtopic(string subject,string connstring) { using (SqlConnection connection = new SqlConnection(connstring)) { SqlCommand command = new SqlCommand("INSERT INTO parent" + "(content)" + "Values(@content)", connection); command.Parameters.Add("@content", SqlDbType.Text).Value = subject; connection.Open(); command.ExecuteNonQuery(); } } public void addchild(string name, string connstring) { using (SqlConnection connection = new SqlConnection(connstring)) {Guid id = Guid.NewGuid(); SqlCommand commandd = new SqlCommand("INSERT INTO child" + "(parentid,data,uniqueid)" + "Values(@@IDENTITY,@data,@uid)", connection); commandd.Parameters.Add("@data", SqlDbType.NVarChar, 50).Value = name; commandd.Parameters.Add("@uid", SqlDbType.UniqueIdentifier).Value = id;
thanks in advance :)
connection.Open(); commandd.ExecuteNonQuery(); }
}
View 2 Replies
View Related
Jul 16, 2005
I have a parent/child relationship in a relational database broken out like this:
Table Name: categories[category_id] int (primary_key NOT NULL),[category_name] varchar(50),[parent_fk] int
The parent references the category_id in the same table to create the parent/child relationships. I can get all the bottom level categories by doing this:
select category_id, category, parent_fk from categories where category_id not in ( select parent_fk from categories)
Each bottom-level category has a count attached to it.
The problem I have is getting the counts rolled up for each parent of the bottom level. A parent could/will have multiple bottom-level categories (and counts).
My sql is a little weak, could you help me out? I can utilize everying in SQL 2000 (stored proc, UDF, anything).
Thanks!
View 3 Replies
View Related
Sep 27, 2013
Here is the table - Company with fields:
CompanyID, ParentCompanyID (both integers)
Given a CompanyID - I want to get all the children for the Company.
I did similar procedures but somehow, could not get this to work.
View 4 Replies
View Related
Jul 1, 2007
I want to find all the child of a node in a tree . A child can have multiple parent i.e 2 can be place under multiple parent . The folling is the data:
ParentID ChildID
-------------------------
10 8
8 6
8 7
7 2
7 5
5 1
5 2
6 2
child of parent if input 10
8
7
6
2
2
5
1
(2) can be neglected
input 7
2
5
1
(2) can be neglected
input 8
7
2
5
(2) can be neglected
Plz help we to write the sql statements
Thanks
View 2 Replies
View Related
Aug 2, 2007
I am designing a table to represent data in hierarchy structure, I use id and parent id to represent the data in hierarchy form:
Id | parent_id
---+-----------
1 | 0
2 | 0
3 | 0
4 | 1
5 | 1
6 | 4
7 | 4
8 | 7
9 | 7
This structure requires complicated queries (recursive call) to find out all the child of a root node, so I have added another field for the root id.
Is this a good relational database design ? kindly suggest.
Id | parent_id | root_id
---+-----------+---------
1 | 0 |
2 | 0 |
3 | 0 |
4 | 1 | 1
5 | 1 | 1
6 | 4 | 1
7 | 4 | 1
8 | 7 | 1
9 | 7 | 1
10 | 2 | 2
11 | 2 | 2
12 | 10 | 2
13 | 10 | 2
Rgds
Vijay
View 3 Replies
View Related
Jul 20, 2005
In our database we have a list of devices in a "Device" Table, eachhaving one or more IP's located in the "IP" Table linked through aforein key on the DeviceID Column.I would like to retrieve this information as SuchDeviceID IpAddress1 10.0.0.1, 10.0.0.2, 10.0.0.32 ...345etc.Is it possible to do that without using cursors? Through a query?
View 1 Replies
View Related
Jun 28, 2004
Hello all, I'm having a real hard time trying to figure this one out. I'm trying to create a sql query that selects both the parent name and it's children, but it's got to loop through all the record sets to populate a drop down as an end result.
I think I thought this out correctly:
I have 2 tables
category
relationship
tbl category
cat_id //auto int
cat_name // varchar
relationship
r_id // auto int
parent_id // int
child_id // int
both the parent_id and child_id are associated with the cat_id
in my category table I could have
1cars // this is parent
2 audi
3 bmw
4 chevy
Table data example
r_id parent_id child_id
****************************
1 1 15
2 1 16
3 1 17
4 2 55
5 2 56
etc...
I want to select both the parent cat_name from category and also select the child cat_name where the parent_id = #
I can do it manaully like this
select cat_name, cat_id, parent_id , child_id from category, relationships where child_id = cat_id and parent_id = 1
what is the best way to loop through all the parent ids to find child category?
Could this be done in a stored procedure?
thanks in advance.
View 3 Replies
View Related
May 9, 2006
I am having problems creating a trigger in SQL Server? I have 2 tables (parent and child) with one to many relationship. When I save a record, one row gets inserted in the parent and one to many gets inserted in the child. The trigger is on the parent table and it is trying to select the number of new records just inserted in the child table that meets a certain criteria. Since the transaction hasn't been committed I can not select the number of records from the child. Does anyone know how to handle this? My manager insists this be done in a trigger.
Thanks, James
View 1 Replies
View Related
Dec 24, 2004
Any one have any ideas or links to point me to ???
View 2 Replies
View Related
Jul 26, 2007
I would like to create a View (we'll call it FamilyView) using two tables, that I can then query against.
For example:
Parent
{
ID_PK,
Name,
PhoneNum,
Address
}
Child
{
ID_PK,
ParentID_FK,
Name
}
The view would return a dataset like this:
Parent.Name, Parent.PhoneNum, Parent.Address, Child.Name1, Child.Name2, Child.Name3... Child.NameN
William Smith, (555)555-5555, 123 Main Street, Susie, Peter, Bill Jr, Fred
Jason Jones, (666)666-6666, 54332 South Ave, Brian, Steven
Kay McPeak, (777)777-7777, 9876 Division NW, Kathy, Sally, Karen, Deb, Becky, Kendra, Ann, Edward
with an unknown number of children for each parent.
Then I would like to be able to query against this view with something like this:
SELECT * FROM FamilyView Where Child2 = 'Peter'
I have no idea how to write the SQL for this View. Is it possible?
Is this possible without using a cursor?
Thanks for any advice you all can give me.
Brian
View 12 Replies
View Related
Mar 23, 2014
Below is my sample data of my table named "Groups"
Code:
with Groups as (
select 1 as GroupId,'Oracle' as GroupName,0 as IdParentGroup union all
select 2 as GroupId,'Microsoft' as GroupName,0 as IdParentGroup union all
select 3 as GroupId,'IBM' as GroupName,0 as IdParentGroup union all
select 4 as GroupId,'SunMicrosystem' as GroupName,1 as IdParentGroup union all
select 5 as GroupId,'peoplesoft' as GroupName,1 as IdParentGroup union all
select 6 as GroupId,'mysql' as GroupName,1 as IdParentGroup union all
select 7 as GroupId,'Nokia' as GroupName,2 as IdParentGroup union all
select 8 as GroupId,'EShop' as GroupName,2 as IdParentGroup union all
select 9 as GroupId,'Meiosys' as GroupName,3 as IdParentGroup union all
select 10 as GroupId,'UrbanCode' as GroupName,3 as IdParentGroup )
select * from groups;
Expected result:
Code:
with ExpectedResult as (
select 'Oracle' as GroupName,'SunMicrosystem' as SubGroup union all
select '' as GroupName,'peoplesoft' as SubGroup union all
select '' as GroupName,'mysql' as SubGroup union all
select 'Microsoft' as GroupName,'Nokia' as SubGroup union all
select '' as GroupName,'EShop' as SubGroup union all
select 'IBM' as GroupName,'Meiosys' as SubGroup union all
select '' as GroupName,'UrbanCode' as SubGroup )
select * from ExpectedResult;
some sample query to how to achieve this parent-child has the same table.
View 9 Replies
View Related
Apr 4, 2008
Hello all gurus out there.
I'm an entre level junior programmer. My question is kind of confusing but I'll try to put it as simple as I can.
First we have a main table called "job1". This table consists the order information. The file_id is the unique id and the primary key for this table. This table also pertains other information such as customer data (max limit 5), job data etc. This table is actively (non-stop) used throughout the day.
We have a non-interactive process which will take customers information from the main table and insert into the child table table "jobcust". Jobcust would have file_id, cust, cust_type. For example, if Job1 table had fiel_id=100 and cust1="Tom" and Cust2="David", now Jobcust will have two records file_id, cust1 and file_id,cust2. The main problem is the child table needs to be updated right away and our non-interactive process is good at doing that.. but it is causing a major DATA LATENCY. I would like to ask you all, if you know any better way of doing this without any process.. like in the back end with a trigger/procedure or something like that.
All you help is appreciated.
Thanks much.
View 5 Replies
View Related
Oct 12, 2013
I am importing data from a paradox table and trying to clean it up. I have this query that finds all the child records that are not in the parent table.
Select MemberID
FROM memtype AS a
WHERE NOT EXISTS
(SELECT *
FROM members AS b
WHERE a.MemberID IN (b.MemberID));
Now I'm trying to delete all those child records instead of just selecting them so I tried...
Delete MemberID
FROM memtype AS a
WHERE NOT EXISTS
(SELECT *
FROM members AS b
WHERE a.MemberID IN (b.MemberID));
Sql clearly doesn't like this
View 1 Replies
View Related
Dec 11, 2013
I have a parts table which has partid (GUID) column and parentpartId (GUID) column. Need to copy the records to the same table with new GUIDs for partids. How to do that? cursor or temp tables?
View 5 Replies
View Related
Feb 24, 2014
I have an application that has an existing query which returns org units (parent and child) from organization table with orderby on createddate + orgid combination.
Also I added another log table Organization_log with exact columns as Organization table and additional 'IS_DELETED' bool column.
WITH Org_TREE AS (
SELECT *, null as 'IS_DELETED', convert (varchar(4000), convert(varchar(30),CREATED_DT,126) + Org_Id) theorderby
FROM Organization WHERE PARENT_Org_ID IS NULL and case_ID='43333'
[code]...
I need to modify the query:
1. To display the records both from the Organization table and Organization_Log table.
2. The orderby should be sorted on 'Organization Name' asc and it should follow the child order in alpha sort as well.
E.g.:
aaa
==>fff
==>ggg
bbb
==> aaa
==> hhh
eee
==> ccc
==> ddd
==> fff
View 5 Replies
View Related
Aug 14, 2007
Hello,
I am wondering if there is a way to insert one parent record with multi child records in one transaction? I am using dataset to update my database. I want to use transaction so if one record insert fails all the transctions rollback.
Thanks
Your Input would be greatly appricated.
View 3 Replies
View Related
Nov 2, 2007
hello there,
I think I might know the answer to this, but I wanted to see if any one has come up with a slick idea for enforcing this relationship. If I have two tables and one is dependent on the other (parent-child relationship), how can I enforce that every parent record has a corresponding child record? Here is a code example
USE tempdb
GO
CREATE TABLE dbo.Parent
(
ParentId int NOT NULL
)
ALTER TABLE dbo.Parent ADD CONSTRAINT PK_Parent PRIMARY KEY CLUSTERED (ParentId)
CREATE TABLE dbo.Child
(
ParentId int NOT NULL
,ChildId int NOT NULL
)
ALTER TABLE dbo.Child ADD CONSTRAINT PK_Child PRIMARY KEY CLUSTERED (ParentId, ChildId)
ALTER TABLE dbo.Child ADD CONSTRAINT FK_Child_Parent FOREIGN KEY (ParentId)
REFERENCES dbo.Parent(ParentId)
INSERT INTO dbo.Parent VALUES (1)
INSERT INTO dbo.Child VALUES (1,1)
INSERT INTO dbo.Parent VALUES (2)
INSERT INTO dbo.Child VALUES (2,2)
INSERT INTO dbo.Child VALUES (2,1)
INSERT INTO dbo.Parent VALUES (3)
SELECT
p.ParentId, 'I SHOULD HAVE A DEPENDENT RECORD'
FROM
dbo.Parent p
LEFT JOIN
dbo.Child c
ON
p.ParentId = c.ParentId
WHERE c.ParentId IS NULL
ParentId 3 should have a child record associated with it. I am assuming that these are my choices:
1) code all inserts to the parent table along with a insert to the child table and wrap those in a transaction
2) place a trigger for insert on the parent table that ensures that the child table is populated after data for the parent.
Here is the gotcha, we will be using a middle-tier data access layer (nhibernate or dlink) so .NET application developers will be creating the data modifications at the transactional level. Also there might be several ongoing ETLs that populate this schema as well, so multiple points of entry and seperate code blocks. I don't want to hide business logic within triggers.
I assume that all our coders are competent and could enforce this properly via code, but I know that mistakes happen. Has any one come across this situation and have a solution for enforcing the integrity of the schema with constraints?
View 4 Replies
View Related
Feb 28, 2008
how can we delete parent table as well as child table using a single query applied on parent table, can someone please help me onn this topic? it will be very nice of you guys.
Rahul Arora
07 Batch
NCCE Israna,
######################
IMPOSSIBLE = I+M+POSSIBLE
View 3 Replies
View Related
