Parent Package Reports Failure On Errors, But No Errors In Log
Jul 31, 2006
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
I have a SSIS Package with a "Execute Package Task" to call a child package. I am trying to have the master/parent package complete its execution regardless the outcome (failure or success) of the child package. The overall structure of the master package is:
1. Perform Pre-load tasks (stored procedure).
2. Execute Package Task (call child package)
3. Perform Post-load Tasks (stored procedure)
I have try everything and cannot get the results that I want... I have tried the combination of "failparentonfailure", "forceexecutionvalue", etc. The master package stops at childs failure. I would like to resume to completion
I have SQL 2000 Server that had a database called ABC and it has been moved to another server on 5-15-2007 I kept ABC database in Read_only mode for few days (just in case) on old server and finally dropped it on 5-20-2007 and I think I forgot to drop the associated logins. I started seeing login failure for user 'xyz' in error logs When I first noticed the login failure error in SQL Server log for login xyz, I deleted xyz login but it did not stop the errors.
I have been trying from then and no luck in identifying the cause/ resolving this issue. I have ran SQL profiler trace and caught the user hostnames, NTusername in few cases and Application Name and contacted the Application owner & user (who are in the trace) to stop windows service/ schedule jobs..anything that is pointing to old server but the bad luck is they are not aware of anything running or pointing to old server. The worst part is the user whose hostnames are shown in the trace have never used ABC database and do not have any idea.
Here is what I found in the profiler trace: TextData LoginName NTUserName HostName ApplicationName Login failed for user 'xyz' xyz AB00007 WAB000007 Microsoft (r) Windows Script Host
Today I have created the xyz login in the server and assigned model database with reader permission to see if log some different error but nothing new (the same login failure error) Finally, I had no solution other than restoring the ABC database back to my old server and set it in to Read_Only mode to stop these errors and Now I see the login 'xyz' firing the query against the database
* Any hint or pointers why this is happening and any possible solution on this?
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have developed a number of reports on Win XP with VS2005. They run on our development server, which is running Windows Server 2003 32-bit. I then deploy these reports on our production server, which is running Windows Server 2003 64-bit edition.
Accessing any of the reports from Report Manager results in javascript errors, such as 'Line 41 Error: 'RSClientController' is undefined'
I get these errors also when invoking these reports through a form post.
It appears that some javascript code generated by the report server is missing. Could this be a 32-bit vs 64-bit issue? Report Manager seems to work fine; it is only when I run a report that I have this problem. This is the first time I've tried to deploy reports to this server.
We have a customer that has a large report that they want to export to Excel. If I try to export the entire report, it just hangs. If I run the report in 2 batches, it exports fine.
Can you tell me if there is a patch for SSRS that is going to address this or if there is a work around that I can put in my report to handle it?
The customer is quite upset at the work around so I'd love to find a solution soon.
I have Reporting Services installed on my web server (Windows 2003) where I am hosting my website too. While installing Reporting Services, I used my database server as SQL Server (Windows 2000, SQL Server 2000). Now when I try to access from browser using http://servername/reports it's giving me following error: "The underlying connection was closed: Could not establish trust relationship with remote server." Also when I try to access http://servername/reportserver/ it gives me this error: "The permissions granted to user '{servername}IUSR_{servername}' are insufficient for performing this operation. (rsAccessDenied) Get Online Help" I have given full access to "ASPNET", as well as "IUSR_{servername}" on the folder "C:Program FilesMicrosoft SQL ServerMSSQLReporting Services" While installing reporting services, I used SQL mode of authentication. My goal is to have reports on internet for public view. I have "Enable Anonymous access" check box checked on IIS with user name "IUSR_{servername}"
I have looked many places for the error and while many people is having same error, everyone has different reason and different solutions.
Not sure what I am missing here...Can anybody help?
I have a Job that creates .CSV files at predetermined intervals (the delimiter is a tabstop) and every 5 minutes I have to retrieve These files one at a time and Import them into the relevant database.
My solution was to create a list of the files and insert this list into a temporary table where a Cursor would extract each filename one at a time and insert that Name into a BCP Statement. The BCP Statement is constructed using dynamic SQL.
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG I reveived the following error. how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507). . . . . . . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736). CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . . . . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875). Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
I have created several DTS packages that run if I execute them imidiatly, but error out if scheduled with the following error...
Executed as user: DomainUsername. DTSRun: Loading... Error: -2147467259 (80004005); Provider Error: 17 (11) Error string: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0. Process Exit Code 1. The step failed.
that first "truncate the product table" then populate the table with new rows....if there is an error then i will invoke the send email task. However in the "truncate the product table" task, the sql i put "truncate dbo.product" instead of "truncate table dbo.product" but this error is not captured in the text file that I m going to send an email to the appropriate personnel.
Under logging, and when i go into "truncate product table" tasks , "Details", i saw "OnError", "OnWarning" and other error handlers...which should i tick in order for the text file to ONLY show errors I encounteered during the running of the SSIS package?
I installed Sql Server Express Advanced today, and decided to install the toolkit as well. When I open Business Intelligence Development Studio, I get the "Package Load Failure" for the 'ReportDesignerPackage' and 'DataWarehouse VSIntegration layer' packages. I can't seem to find any recent clogs or forum responses that address this issue, and the older ones (most are from 2005) haven't solved the problem. Do I have to reinstall everything???
I have a simple SSIS package I built to migrate data from a SQL db on one server to another SQL db on another server. All it does is: Execute SQL task to disable some triggers on the target table, Data Flow Task to pull the data from the source (a simple sql query) into the destination table (using OLEDB), then another Execute SQL task to re-enable the triggers.
This package ran fine several times during my testing. However, this morning it's not working anymore. When I run it and check its progress, the "Validation has started" is the only thing runs, then nothing else happens... no error messages, no timeouts, nothing in the output window besides "DTS.Pipeline: Validation phase is beginning".
The only thing that has changed is one change to a date in the where clause of my source query, so I'm baffled on why it no longer runs.
I'm pretty new to SSIS, so I could easily be missing something obvious here.
Anyone have any ideas on what's up, or who can point me in the right direction? I'm currently reading up on how to debug and add more comprehensive error handling, in hopes of finding a better description of the problem.
I hope someone can help becuase this problem is issue us several headaches.
We are currently trying to deploy an SSIS package to a production server. The deployment goes fine, the package runs ok when executed manually. The issues start when we try and execute it under the SQL agent.
Having gone back to the drawing board and spent much of the day reading various articles and applying the various options (especially those within the MS KB article 918760), we are still no closer to a resolution.
The SSIS package was created under an Administrator, and the SQL agent runs under a different Domain Admin account.
When we set up the Schedule to read from SQL Server or the SSIS Store the standard "Executed as user: DOMAINUSERNAME. The package execution failed. The step failed" in the history.
We tried to create the package as a file access and now get "Package could not be found" even though you can browse to i in the schedule list. The Domain account as full access to the folder where the package resides.
Has anyone else come across this issue, or have a workable solution?
I have an SSIS package that fires an OnTaskFailed event whenever any of my tasks fail. I would like to put any SSIS task failure message into a user defined variable. Any idea how to do this? Any help appreciated. Regards, Paul.
I get errors when I check out an SSIS package from source control (both Source Safe and TFS) relating to the connection objects where I was not the original developer who checked it in. Is there a solution to this other than altering the connection loginpassword for every connection object in the package before deploying?
I am having strange errors with a package when running locally that has not been an issue before.
The main symtom is that several Data Flow Tasks are either not inserting records on the destination or are only inserting 1 single record before the package errors with the error shown below.
Strangely, the debugger will show X # of records from source and destination, but either no records are actually written or, again, in many cases, only 1 single record is written. This is very strange.
App, System and Security logs yield no indication of security or other errors. All I have to go on is the above anomolies and the error message provided below.
Below is the error message, can someone help me decrypt it?
Many thanks,
Rick
Error: 0xC0202009 at DFT_LoadProcessUnits, OLE_SRC_VLD_PROC_TDV_RESULT [1]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host.
".
Error: 0xC0047038 at DFT_LoadProcessUnits, DTS.Pipeline: The PrimeOutput method on component "OLE_SRC_VLD_PROC_TDV_RESULT" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "SourceThread3" has exited with error code 0xC0047038.
Error: 0xC0202009 at DFT_LoadProcessUnits, OLE_SRC_DimEntities [199]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: The specified network name is no longer available.
".
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047038 at DFT_LoadProcessUnits, DTS.Pipeline: The PrimeOutput method on component "OLE_SRC_DimEntities" (199) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread4" has exited with error code 0xC0047039.
Information: 0x40043008 at DFT_LoadProcessUnits, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at DFT_LoadProcessUnits, OLE_DST_FactResults [2076]: The final commit for the data insertion has started.
Information: 0x402090E0 at DFT_LoadProcessUnits, OLE_DST_FactResults [2076]: The final commit for the data insertion has ended.
Information: 0x40043009 at DFT_LoadProcessUnits, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at DFT_LoadProcessUnits, DTS.Pipeline: "component "OLE_DST_FactResults" (2076)" wrote 0 rows.
Lately, I have been experimenting with SSIS and I created a generic custom error logging component that saves all offending data on data flow component failure. However...
Instead of re-directing rows at the data flow level and handling/logging the data at that level, is it possible to catch all of this information at the package level and handle/process it there?
I have created a package which executes every 10 mins. Last week end for maintenance purpose, I shutdown my database. Now as an initial execution process, my package does the default validation steps on which the database connection validation step fails. As this is the default functionality of SSIS I am not able to capture this error. Is there anyway to capture this error inside SSIS Package?
I have a data flow task in which I have a ADO NET source and OLE DB Destination. I have in the ADO NET source a sql command which pulls all the columns in a table. My requirement is to ignore a particular column,say column99. I opened advanced editor and deleted the mapping between the external and output columns for column99. I had also set the Error and Truncation to "Ignore Failure" for column99. I had also mapped the destination column to <Ignore> in OLD DB destination.
But this still throws the error-
Description: The ADO NET Source was unable to process the data. Field table-column99 missing an escape character for a quote.Unable to update PK WHERE clause.Error processing data batch.
I have a dataset that is between 40-50K records that has to go through a process that is pre-defined. SSIS works just fine with the smaller sets even up to 20K but this job keeps blowing up saying something along the lines of cannot write to recordset destination. Does this make sense to anyone? The sever is a 2 processor with 2GB of ram. Physical memory usage spikes to about 1.6GB during the run but the processor never really gets above 30% usage. Does this product just not scale yet?
I have an SSIS and SSAS project in the same solution. Â I need to debug the SSIS package regardless if there is an error or two in the SSAS project. Â Is there a way to ignore the SSAS project while I debug the SSIS package?
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
I'd like to know if there's a way to pass parent package parameters to a package executed by SQL Server Job Agent? It appears that sp_start_job doesn't have any variable that could accomodate this.
We have one main package from which 7 other child packages are called. We are using ParentPackage variables to assign values for variables and database connections.
While the values from ParentPackage variable get assigned to some of the packages properly, to others it doesn€™t assign the value.
For example: Except for one of the packages the database connection string gets assigned properly to all other packages.
Similarly, in another package one of the variables doesn€™t get assigned. In other packages it is assigned properly.
We have checked all the other property values and they are exactly the same.
We cannot make any head or tail of this erratic behavior.
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Here's the deal. I have a child package, (say, pack01.dtsx), which uses a dtsconfig file for its connection string, which can be called from other packages, but which also can be called by itself.
However I also have another package (say, pack02.dtsx) which uses the same dtsconfig file for its connection string. It calls on pack01.dtsx.
When I use DTEXECUI and run pack01.dtsx, specifying the proper .dtsconfig file, it goes well. But when I try and run pack02.dtsx, an error occurs saying pack01.dtsx connection cannot be established.
How do I pass the connectionstring being used by pack02 to pack01, without having to remove the configuration file setting of pack01? Can a Parent Package configuration and a configuration file try and map to the same property?
